Testing Equipment

JDP8000-L Portable High Accuracy Chilled Mirror Dew Point Meter is specially designed for testing the humidity in gases, such as air, dry gas, compressed gas, natural gas, liquefied gas, refrigerant. JDP8000-L is widely used for air separation gas analysis, power switch, metal smelting, petrochemical processes, natural gas processing, electronics manufacturing, textiles, Medicine, food, aerospace and other fields. High accuracy, strong reliability, fast measurement and no drift. Key Features: ⚫ Support a variety of gas humidity measurement (SF6, air, nitrogen, oxygen, argon, electronic gas, natural gas, etc.); ⚫ Based on the principle of cold mirror dew point, it can directly and accurately reflect the actual humidity situation without lag; ⚫ Four-stage semiconductor refrigeration + cold pipe heat dissipation, the cooling capacity is better than 95℃, and the lower limit of measurement is low; ⚫ High precision: ≤0.2℃; Repeatability: ≤0.1℃; ⚫ High sensitivity, fast measurement speed and good stability; ⚫ Built-in condensation accelerator (QCA), which can ensure fast measurement of extra dry gas stable dew point; ⚫ Dew point temperature ℃, PPMv, gas flow, ambient temperature, ambient humidity Degree multi-unit display; ⚫ Color large-screen LCD display, full curve tracking; ⚫ Visually display the frost condensation progress, which is convenient for judging the test progress; ⚫ The mirror surface is automatically checked. When the light energy is insufficient or too strong, the light energy automatic adjustment; ⚫ Automatic alarm prompt function for fault information; ⚫ Strong anti-pollution and anti-interference ability; ⚫ Simple operation and easy to carry; ⚫ Support Chinese and English interface display; ⚫ Support measurement record storage, query and printing; ⚫ Built-in high-capacity lithium battery power supply, can work continuously for more than 8 hours, easy to use; ⚫ Traceable certificate from China Metrology Institute.

Minimum Order: 1 bags

The GF3000 series stationary three phase electricity meter test bench is a fully automatic system that enables simultaneous, multi-position calibration and verification of three-phase electric energy meters error. FUNCTIONS: 1．Timing error test. 2．Creeping and starting test. 3．Equipped with RS232 communication port. 4．Calibration and verification of constant. 5．Standard deviation, 24 hour variation test.

Minimum Order: 1 bags

GF312V2 is mainly used to test the error of single-phase electricity meter,three-phase kWH meter and Various active and reactive energy meters. The the instrument adopted high-speed A/D conversion and sends it to DSP for digital processing,which greatly improves the accuracy and stability of measurement. Features: 1.accuracy: 0.02%,0.05%,0.1% 2.Portable design 3.Power recovery 4.Can measure two meters at the same time 5.Range: 0-600V; 0-120A 6.7 inch TFT color LCD 7.Three power supply modes 8.Harmonic: 2-51 9.Power consumption:≤13VA 10.Weight: 1.8kg

Minimum Order: 1 bags

The GF302D1 portable three-phase ELECTRICITY meter test device is a error measuring instrument. GF302D1 has high accuracy 0.05%, portable design and high tolerance about the environment. FEATURES: 1．range:voltage: 0-500V; current:0-120A; 2．Can store 500pcs of measurement data; 3．Weight: 12.8 4．Can measure frequency, harmonic wave,power factor; 5．With PC port,RS232 communication port 6．Can test by manual or automatic;

Minimum Order: 1 bags

This equipment is designed for cookware handle fatigue test, such as cooking pan, pots etc. During test, continuously raising and lowering a loaded item of cookware from a surface covered with a 5 mm thick rubber plate at the frequency of 25 times per minute. Total run 15,000 test cycles. Automatically stop when test cycles were up.

Minimum Order: 1 bags

This testing equipment is for the determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, and/or their vapors for the øat surface of vitreous and porcelain enamels. It includes two test zones of the liquid zone and vapor zone, the test specimen will be placed in these two zones and exposed to attack by specified chemical conditions for a required period. The tester is of the movable heating-controlling device for test solution heating and boiling, the solution-condenser circulation system can prevent solution loss and dry out at the process.

Minimum Order: 1 bags

This testing equipment is used for cookware base stability shock test in the cookware product. The test procedure is fully automatic, including heating, water pouring, evaporating, and repeating a total of 40 cycles. This tester equips the temp. & humid sensor, ensuring to read the correct date as per standard requests. When the test is finished, the customer can check the base and compare the result before and after 40 cycles of heating-pouring-evaporating, If the bottom of the cookware becomes no convex, then the test passes.

Minimum Order: 1 bags

GS-MEC-BS02Pro, fully automatic execution of the testing method after EN-12875-1 inclusive fully automatic dosage of the washing powder/river cleaner with the prescribed quantities. All rinsing and drying items as well as the test cycles are freely programmable.

Minimum Order: 1 bags

This test simulates the repeated application of loads and/or movement of components occurring during long-term use and assessing the strength of the mattress under such conditions and is a test is a procedure mainly intended to evaluate the change of the properties of the mattress caused by repeated loadings. The test stand enables both durability, hardness, bed edge tests according to EN 1957 through-loading device (Roll), hardness measuring device, and edge measuring device in one stop without the need for a rearrangement of a specimen.

Minimum Order: 1 bags

This porosity tester is used to measure the porosity of flexible cellular polyurethane. The test principle is to place the specimen in a cavity, and the equipment automatically applies continuous air pressure, then test how easy it is for the air to pass through the cellular structure of the foam. It is applied to the ASTM D3574 standard and is suitable for three levels of low, medium, and high porosity foam.

Minimum Order: 1 bags

This machine will be known as the indentation force deflection test of flexible cellular polyurethane material and the results as the IFD values. This test consists of measuring the force necessary to produce designated indentations in the foam product, for example, indentations at 25 and 65 % deflections.

Minimum Order: 1 bags

This equipment is our updated version, it is an all-in-one machine that can do both hardness test, fatigue test, and integrated test in accordance with the ASTM D3574, ISO 2439, IDO 3385 standards. Users can evaluate the properties changes of the foam material occurring in the long-term use.

Minimum Order: 1 bags

This machine is designed for the determination of the rebound elasticity of the foam materials applied in ASTM D3574, ISO 8307, JIS 6400. This instrument through a given diameter and the quality of steel ball in the specified height on free falling on the foam sample, calculate the spring back of the maximum height of steel ball and ball drop height ratio is the percentage of spring rate, expressed as a resilient rate of foam plastics can rebound resilience. This machine adopts a microprocessor to control, LCD display and can print test data.

Minimum Order: 1 bags

Standard:GB17761-2018 Clause 7.2.1,Clause 7.2.2 , Clause 7.2.4, ISO4210. Application: This tester is used for the detection of electric bicycle speed limit and pedal riding ability. According to the relevant requirements of GB17761-2018, GB3565-2005 and other standards, the safety performance and energy consumption of electric bicycles and other products are tested. The data can be stored and transmitted. The test parameters include deceleration, speed, time, distance, force, current, voltage, and so on. Operating conditions: 1,Test environment: -5 °C ~ 35 °C, wind speed <3m / s. 2,Test road: 1) Road pavement: concrete road pavement. 2) Road size: 3m (length) * 2m (width) * 20cm (thickness). 3) Friction coefficient between dry road surface and electric bicycle tire: minimum 0.5. 3,Cycling staff weight: total mass ≤ 75Kg. Parameters: 1,It can test the safety performance of electric bicycle according to the requirements of GB17761-2018, voltage collection range: 24V/36V/48V, 48V/60V/72V. 2,The electric bicycle braking performance test can be carried out in accordance with the requirements of GB3565-2005. 3,The driving mileage test can be carried out as required. 4,A variety of test methods to meet the vehicle speed measurement of the vehicle's static state. 5,The electric bicycle safety performance test can be carried out in accordance with the requirements of GB17761-2018. 6,Instrument accuracy: ±2% (provided in the response file to provide proof of the technical parameters (manufacturer color pages or manuals or product manuals)). 7,Measuring range: NO. Item Range 1 Speed 0.5～200.0km/h 2 Distance 0～20000m 3 Time 0～99999s 4 Force hand brake 0 ~ 200N 5 Current 0～100A 6 Voltage 0～200V (Provided materials (manufacturer color pages or instruction manuals or product manuals) that reflect this technical parameter are provided in the response file) 8,Test parameter resolution: NO. Item Resolution 1 Speed 0.01km/h 2 Distance 0.01m 3 Time 0.01s 4 Force 0.1N 5 Current 0.1A 6 Voltage 0.1V The main configuration: 1,1 set of professional version test software 2,Control display device 1 PC 3,GPS sensor 1 Set 4,Speed sensor 1 Set 5,Brake operating force component 1 Set 6,Current sensor 1 Set 7,Control computer 1 PC 8,Brake spray device 1 Set 9,Test accessory 1 Set 10,Import VBOX II SX (RLVB2SX) road vision 1 PC ISO4210 IEC Test Equipment Electric Bicycle Concrete Road Pavement 200V Tester With Friction Coefficient Of 0.5 0