Testing Equipment

In the aerospace field: Components of aircraft and assemblies of spacecraft, etc., need to be strictly tested in environments with high and low temperatures and low air pressure. 2. Electronics industry: From chips in mobile phones and computers to various electronic components, integrated circuits, circuit boards, etc., by simulating different temperature and air pressure conditions, their working conditions in harsh environments are detected to improve product quality and stability. Low-pressure test chambers usually adopt an integral combination structure, consisting of an insulated box body at the front, a refrigeration and vacuum unit at the rear, and an electrical control system on the side. Among them, the box body is the core pressure-bearing part, responsible for maintaining the changes in internal air pressure and ensuring the sealing and pressure resistance of the equipment during the process of air pressure change. The insulation box is made of highly efficient heat insulation materials, which can prevent the interference of external temperature on the test environment and ensure the accuracy of the test results. In addition, the interior of the box is usually designed with heating, cooling and humidity regulation devices to simulate more complex environmental conditions.If you need more information about the models of our testing equipment. Please contact me.https://www.chamber-testing.com/ echnica , l Specifications Temperature Range: -70°C to +180°C Altitude Simulation: Sea level to 43,000m (110-0.1 kPa) Rapid decompression: Achieve 16,800m pressure differential (4,550m → 21,350m) within 15 seconds Humidity Range: 10% to 98% RH Chamber Capacity: 10 to 100 m³ (customizable) Noise test：≤ 75dB Patent Number: CN201520670413.0

Minimum Order: 1 bags

Application professional Walk In ess chamber controlled environmental chambers temperature cyclic stress screening is to change the external environmental stress by using the temperature acceleration technique (the product produces alternating expansion and contraction when circulating in the upper and lower extreme temperatures) under the design strength limit, so as to generate thermal stress and strain in the product. Feature Walk In ess Chamber simulate rapid temperature transition rates for faster product temperature changes based on your testing requirements – testing your products and yielding defects faster. feature enhanced air flow with larger compressors for change rates to 15C/min and higher. climatic test chamber support reach in, walk in, drive in and custom fast change rate test chambers that are designed for your specific.If you need more models about our test equipment, please reference our https://www.chamber-testing.com/ Can set the temperature variable rate of the different stress screening Can perform a rapid temperature change (ESS), condensation test, high temperature and humidity test, temperature and humidity cycling test, etc. Meet requirements of stress screening test（ESS Test） for electronic equipment Test methods:Switching temperature & average temperature Support variety of stress screening (fast temperature change rate) 5deg C/min,  10deg C/min,  15deg C/min experimental conditions Meet Standards for electronic equipment MIL-STD-2164, MIL-344A-4-16, MIL-2134A- 19, NABMAT-9492, GJB-1032-90, GJB/Z34-5.1.6, IPC-9701....ETC. Have 2 test methods:          ①temperature test           ②average temperature test   With aluminum sheet test machine load capacity (non plastic load) Single machine can perform fast temperature change (ESS), condensation test, high temperature and humidity test, temperature and humidity cycling test, etc. Following sample load customized with a large ESS Chamber Built in two-way USB2.0 portable storage interface (can copy the test curve and load the test program) Complete real-time test curve analysis shows that no time limit Can be integrated with the E management system to monitor the management system Multi-language selection: Chinese, English, Russian, Korean, Japanese, German  multilingual language switching.

Minimum Order: 1 bags

Vacuum environment simulation In the thermal vacuum test, the first step is to simulate the vacuum environment of space. When spacecraft operate in space, there is almost no air around them, meaning they are in a high vacuum state. To simulate this environment on the ground, a vacuum system is used, including vacuum pumps, gas condensers, and pressure sensors, etc. The gas inside the test chamber is evacuated to make the internal pressure approach the vacuum state. Usually, the vacuum requirement of the thermal vacuum test is better than 6.5x10^-3 Pa to ensure that the simulated vacuum environment is close enough to the real space environment.If you need more models about our test equipment, please reference our ： https://www.chamber-testing.com/ Temperature cycling simulation In space, spacecraft undergo significant temperature changes because they are exposed to solar radiation and cosmic darkness. The thermal vacuum test simulates these temperature cycles through heating systems and cooling systems. The heating system can use resistance wires, radiation heaters, or high-frequency heaters, etc., by controlling the current and voltage of the heating elements to regulate the temperature. The cooling system may use low-temperature media such as liquid ammonia. During the test, the spacecraft is heated to a high temperature (for example, +65°C) and cooled to a low temperature (for example, -35°C), and cycles between these extreme temperatures to test its performance under temperature changes.

Minimum Order: 1 bags

Inner tank treatment: Stainless steel inner tank and treated to prevent steam and rust. Drip trough design: Hidden under the door, it is both effective and aesthetically pleasing. Noise reduction system: The control box adopts double-layer isolation, which can reduce the noise of the test chamber (by 59 to 68 decibels depending on the size of the compressor), and further noise reduction measures can also be taken according to the user's requirements. Air supply circulation system: It ensures that the parameters inside the test chamber can be precisely controlled even when the heat is slightly excessive. The powerful and sensitive exhaust system can quickly change the temperature of the air and samples inside the test chamber.If you need more information about the models of our testing equipment. Please contact me.https://www.chamber- testing.com/ Climate test chambers can simulate various environmental climates, as well as transportation, handling, vibration and other conditions. They are used to evaluate the behavioral performance of electrical products, materials, components, equipment, etc. under given environmental conditions. They are widely applied in industries such as aviation, aerospace, information, electronics, automobiles, and instrumentation, and are also used in colleges and universities, military, shipbuilding, medical care and other fields. Common tests include accelerated damp heat test, alternating warm heat test,

Minimum Order: 1 bags

A vacuum test chamber is a type of testing equipment capable of simulating specific environments. As an important type among them, the thermal vacuum test chamber is a comprehensive testing device that simulates high vacuum and alternating high and low temperature environments. It can simulate the real state of products in the usage environment and test the performance and reliability of products under high temperature, low temperature and vacuum conditions. It is mainly used for reliability testing and performance verification of products such as spacecraft components, satellite modules, precision electronic instruments, and optical devices. The thermal vacuum test chamber mainly simulates a high-temperature and high- vacuum environment through the coordinated action of a vacuum system and a heating/cooling system. The vacuum system expels the gas in the vacuum chamber through components such as vacuum pumps, gas condensers and pressure sensors, bringing the internal pressure close to a vacuum state. The heating system is usually composed of resistance wires, radiant heaters or high-frequency heaters, etc. The heating power and temperature are regulated by controlling the current and voltage of the heating elements. In practical operation, a high vacuum environment is formed by the combination of a main pump (such as a mechanical pump) and a molecular pump to evacuate the vacuum chamber. The heating system heats or cools the chamber through electric heating wires or liquid nitrogen, creating a uniform temperature field in the heat sinks of the chamber, simulating a space environment with both vacuum and a wide temperature range (such as -100℃ to 125℃).If you need more information about the models of our testing equipment. Please contact me.https://www.chamber-testing.com/ Technical Specifications Capacity：0.5 m³ to 2.65 m³(Customizable) High Vacuum Level (mbar)：5.0×10−7 No-load Vacuum Level (mbar)：5.0×10−7(Room temperature) Vacuum Cube Leak Rate：1×10−9std/cc/sec Pressure Regulation in Multiple Ranges (mbar/Torr)：Adjustable Temperature Range： -190°C(LN2 cooling) to 150°C Temperature Uniformity：±2℃

Minimum Order: 1 bags

Safety Features 1.Battery-Specific Thermal Management: •Dual-compressor cascade cooling (-40°C stability) and ceramic heaters for rapid high-temperature recovery. 2.Precision Electrochemical Control: •Integrated battery cyclers with CAN/Modbus protocols, supporting SOP (State of Power), SOH (State of Health), and DCR (Direct Current Resistance) monitoring. 3.Safety-Centric Design-meet Hazard level: • chambers are designed with Fire-resistant stainless steel interior, fire suppression,nitrogen purge system, and emergency power cutoff for thermal runaway prevention . 4.Data Acquisition & AI Analytics: •Real-time logging of voltage, current, temperature, and pressure via LabVIEW/Python APIs. AI-driven anomaly detection reduces test cycles by 30%. If you need more information about the models of our testing equipment. Please contact me.https://www.chamber-testing.com/ Test-Chambe , r.html 5.Ener , gy Efficiency and Energy storage: •Heat recovery during discharge cycles cuts energy use by 25% (ISO 50001 compliant). Standards Compliance 1.Global Safety: •UL 2054:2025 (Household Batteries), IEC 62133-3:2024 (lithium ion batteries systems). 2.Automotive: •SAE J2464 (Abuse Testing), GB/T 31485 (EV(Electric vehichles) Battery Safety). 3.Industrial: •ISO 12405-4 (Performance Testing), UN 38.3 (Transportation) . 4.Sustainability: •EU Battery Regulation 2025/07 (Carbon Footprint Tracking), REACH SVHC compliance.

Minimum Order: 1 bags

The high and low temperature alternating wet heat test chamber is a crucial testing equipment in fields such as aviation, automobiles, home appliances, and scientific research. It is mainly used to simulate high and low temperatures, alternating wet heat and dry heat conditions, or constant environments to evaluate the performance parameters of electrical and electronic products under temperature changes. It is of the same type as the constant temperature and humidity test chamber, with only different names. The core function is to verify the reliability and stability of materials and products by precisely controlling temperature and humidity conditions. Technical Specifications Capacity：90 to 1000L Temperature Range：-70℃ to +180℃ Temperature Fluctuation：≤ ±0.5℃ Temperature Deviation：≤ ±2.0℃ Temperature Uniformity：≤ 2.0℃ Humidity Range (%RH)※2：10%～98% RH Humidity Uniformity：±1.0 % RH Noise test：≤ 68dB .If you need more models about our test equipment, please reference our ： https://www.chamber-testing.com/

Minimum Order: 1 bags

1.EV Battery tests Development: •Cycle life testing (e.g., 1,000+ cycles at -30°C), calendar aging, and thermal runaway propagation studies (GB 38031-2024). 2.Consumer Electronics: •Fast-charge validation for smartphones, drones, and wearables under extreme climates (e.g., 45°C/95% RH chamber for battery). 3.Energy Storage Systems (ESS): •Grid-scale battery stability tests (UL 9540A) and low-temperature performance (-40°C) for Arctic deployments. 4.Aerospace & Defense: •Qualification of aviation batteries(included batter cell and test lithium ion) (DO-311A) and soldier-portable power systems in desert/humid conditions. 5.R&D & Certification: •UN 38.3 compliance for transport safety, IEC 62660-2 for reliability, and custom profiles mimicking real-world load fluctuations.If you need more models about our test equipment, please reference our ： chamber-testing（Click）com

Minimum Order: 1 bags

TESTEQ Thermal Vacuum Cleaning System for High-Precision Semiconductor Components Industry-Leading Contamination Removal for Lithography, Optics & Wafer Processing This equipment adopts an innovative inclined sealing structure (patented design-Thermal Vacuum/Lithography/UHV).  Through the gravity-adaptive cover plate and double-ring sealing ring interlocking technology, it can maintain a stable vacuum level (≤10⁻⁶ Pa), solving the problem of reduced cleaning efficiency caused by sealing failure in traditional equipment.  It integrates a dual-fluid spray system (sodium hydroxide + deionized water), supporting non-destructive cleaning in a high-temperature (350℃) vacuum environment, avoiding thermal stress deformation.  It is suitable for the maintenance of high-precision components such as mask plates, lens groups, and vacuum pump components of lithography machines, significantly improving chip yield and equipment lifespan.If you need more models about our test equipment, please reference our ： chamber-testing （Click）com

Minimum Order: 1 bags

1.Reliable Thermal Shock Testing for Automotive Excellence Ensure automotive component durability with our advanced ice water shock test chamber. Designed to simulate sudden temperature changes—such as hot engine parts hitting icy road spray—this system rigorously evaluates engines, brake valves, ECUs, and battery packs for thermal resilience and sealing integrity. Meet ISO and OEM standards with precision-controlled testing that mirrors real- world winter driving conditions. 2. Validate Electronics in Extreme Environments From smartphones to industrial control units, electronic devices must withstand rapid temperature shifts and moisture exposure. Our ice water immersion tester replicates harsh scenarios like rain-soaked operation or snowmelt contact, verifying waterproof performance and long-term reliability of PCBs, connectors, sensors, and outdoor enclosures used in telecom, consumer tech, and transportation sectors. 3. Aerospace-Grade Thermal Shock Solutions Certify aerospace components under MIL-STD-810G and DO-160 compliance with high-fidelity ice water shock testing. Test aircraft engine inlets, avionics housings, and re-entry vehicle seals against extreme thermal cycling between sub-zero altitudes and ground temperatures. Our chambers deliver unmatched accuracy for mission-critical reliability validation in aviation and space exploration systems. 4. Battery & EV Component Resilience Under Cold Stress Accelerate innovation in electric mobility with precise low-temperature impact assessment. Our thermal shock chamber tests EV battery modules, power electronics, and charging infrastructure under simulated ice-water splash conditions—detecting seal failures, internal resistance spikes, and capacity degradation before deployment. Essential for ensuring safety and longevity in next-gen energy storage systems. 5. Sealing Performance Validation for Connectors & Cables Protect signal integrity and prevent corrosion in automotive and industrial wiring systems. This ice water shock tester assesses the hermetic sealing of electrical connectors, harnesses, and junction boxes during abrupt thermal transitions—critical for autonomous vehicles, robotics, and outdoor communication networks exposed to freezing rain and thaw cycles. 6. Material Durability Testing for Plastics & Elastomers Evaluate the long-term behavior of rubber gaskets, polymer seals, and composite materials under repeated thermal stress. Our chamber simulates decades of environmental aging in weeks by cycling samples between elevated operating temps and ice-cold immersion—revealing cracking, shrinkage, and loss of elasticity early in R&D or quality assurance workflows.If you need more information about the models of our testing equipment. Please contact me.https://www.chamber-testing.com/a/d/splach- , water-chamber.html

Minimum Order: 1 bags

Features: 1.Cold/Hot Balance Technology  Ensures extreme temperature stability while reducing energy consumption by 30%. 2.Smart Control System (v3.0)  Provides real-time monitoring and traceability of operational status, eliminating manual checks and significantly cutting labor and maintenance costs. 3.High-Speed Transition  Achieves rapid temperature shifts with mechanical refrigeration, ensuring reliability and precision for critical testing environments. 4.User-Centric Design  Customizable chamber sizes and intuitive controls meet diverse industry needs, from aerospace to electronics validation. TESTEQ Wide Range Thermal Cycling Test Equipment -70°C~+180°C IEC 60068-2- 14 N Test Ready Fully Compliant with Major International Test Standards The TESTEQ Rapid Temperature Change Test Chamber is engineered to meet and exceed the stringent requirements of key industry standards, including: Reliability Testing Chamber for Electronics Rapid Temp Cycle from -55°C to +125°C ±0.3°C Precision (Temperature Cycling- JEDEC Standard JESD22-A104G) ― Reliably performs high-speed temperature cycling tests for semiconductor and electronic components to evaluate their robustness against thermal fatigue and interconnect failures. Environmental Stress Screening Chamber 5–30°C/min Adjustable Rate Meets MIL-STD-810G Method 503 (Military Standard Environmental Test Methods) ― Supports a wide range of defense and aerospace environmental stress screening (ESS) tests, including rapid transition thermal cycling as required by MIL-STD-810 and MIL-STD-883. Rapid Temperature Cycling Test Chamber -55°C to +180°C DO-160 & GB/T2423.22 Certified (Environmental Conditions and Test Procedures for Airborne Equipment) ― Ideal for validating avionics equipment under extreme temperature variations and rapid transition conditions per Sections 4.0 and 5.0.If you need more models about our test equipment, please reference our ： chamber-testing （Click）com

Minimum Order: 1 bags

Mould Online Width Adjustment and Taper Measurement Overview In order to meet the needs of producing various specifications of continuously cast products, shorten the time for replacing the mold, and improve the production capacity and production efficiency of the continuous casting machine, the mold online width adjustment system is the key technology for efficient continuous casting. The online mold width adjustment system enables the two narrow sides of the continuous casting slab mold to move inward or outward in small steps until the predetermined width is reached. During the production process, the adjustment of the mold’s width can be completed without stopping the machine. Generally, the online width adjustment of the mold needs to be connected with the online taper measurement of the mold. Only with adjustment and detection can the online adjustment range of the mold be accurately controlled. The components of the system Workstation: host system, system width adjustment control, taper detection. On-site operation box: real-time display of the current control status, manual operation to adjust parameters. Digital Electric Cylinder: Precise digital control of electro-hydraulic drive cylinder, which can achieve high-precision quantitative control. On-line measurement of taper: Install it on the narrow-face copper plate of the mold, and monitor the taper of the narrow-face copper plate in real time. Cooperate with the detection feedback control of the width adjustment system, so as to achieve high-precision adjustment. The technical parameters Adjustable range: 0-1250mm (unilateral) Control accuracy: 0.02mm/0.05mm/0.1mm Step resolution: 0.01mm/0.02mm Running speed: 0-10mm/s Power: 3.5KWl 16-bit encoder: 65536 pulses Weight: 25Kg Shell: high-strength aluminum alloy The functions of the system Realize online width adjustment function Realize the online real-time monitoring function of mold taper Continuous casting production adjustment and non-stop production One-key operation in the main control room, automatic completion High adjustment accuracy and fast speed The interlock control of the continuous casting steelmaking system can realize automatic steel pouring

Minimum Order: 1 bags

ZSQ-T200 Online Surface Quality Inspection System for Continuously Cast Product (CCD) Overview The surface quality inspection of high temperature cast product is of great significance to the repair of cast product’s defects and the hot delivery of hot cast product. The ZSQ-T series of online surface quality inspection equipment for casting billets developed by Wuhan CenterRise M&C Engineering Co., Ltd can detect the defects such as scratches, cracks, holes, pits, edge cracks, edge defects on the surface of the cast products, and meet the customer's requirements for the quality inspection of the surface of the cast product. The principle of the system The ZSQ-T200 online surface quality inspection system for continuously cast products adopts the principle of optical imaging and uses a CCD image sensor to input the surface image of the cast products to be detected into the computer, and then the obtained image is processed by special image processing software to find out whether there is any defect in the image. After the defects in the image are obtained, the obtained defects are classified through a special self-learning system, and finally the requirements of the computer to automatically identify the surface defects of the cast products are achieved. The composition of the system 1. Optical part: The optical part is composed of multiple fixed-focus lenses and linear CCD, which mainly realizes scanning and imaging of the surface of the cast products. 2. Lighting part: The lighting part is composed of a high-brightness LED array and a cylindrical lens, which realizes high-brightness and high- uniformity lighting on the surface of the cast products. 3. Mechanical structure part: The mechanical structure part mainly realizes the adjustment, installation and fixing of the optical part and the lighting part, and consists of the imaging head (optical part), light box (lighting part), bracket and control cabinet. The structure is required to be stable and reliable. 4. Real-time processing: The real-time processing part is completed by the multi-CCD data real-time sampling processing unit (high-speed DSP) independently developed by Wuhan CenterRise M&C Engineering Co., Ltd. 5. Hardware part: The hardware part consists of high-speed storage controller and storage hard disk array, Gigabit InternetMAC controller, Gigabit Ethernet PHY. Rj45, and multiple high-speed workstations. 6. Detection software: The detection software mainly realizes the functions of collection, storage, transmission, processing of CCD scanning images, extraction of defects, analysis of defect characteristics, calculation of defect size and position, storage of defect images, generation of cast product’s surface quality analysis reports. etc.

Minimum Order: 1 bags

Infrared/Laser Cut-to-Length Cutting System Overview The all-digital non-contact infrared automatic cut-to-length cutting system developed by Wuhan CenterRise M&C Engineering Co., Ltd. is the first digital measurement, digital transmission, digital positioning and digital control technology in China. It is suitable for the primary and secondary cutting of continuously cast product of square billets, rectangular billets, slabs, round billets and shaped billets. It can automatically cut 1-48 billets to length at the same time, and display the casting speed and running status of each billet. The system has high measurement and control accuracy and strong anti-interference ability, which improves the output and quality of the cast products and reduces the labor intensity of the operator. The whole system has the advantages of low investment, simple installation, debugging and operation, and basically maintenance free. No need to change the original production equipment, a major breakthrough in the automatic cut-to-length cutting method, and it is also an important part of the continuous casting process, which has been highly praised by experts and manufacturers. Digital infrared cutting to length can also provide high-definition solutions, so that the measurement error is ±1mm, and the system can support 12 strands high-definition CCD image measurement. The features of the system 1. The system adopts advanced digital image processing technology (non- contact type) to identify the length of hot billet online, automatically controls the flame cutting machine to cut the hot billet to a certain length, detects and displays the running status and casting speed, and collects the image information of the moving billet from a long distance through an infrared camera. 2. The computer processes the image information by pattern recognition program, forms the operation information and converts it into the electrical signal of the specified format, so that the hot billet can be cut by the actuator. The system can cut the 1-48 billets to length at the same time with an infrared camera. 3. A schematic diagram of the overall layout and working principle of the system is shown in Figure 1. The functions of the system 1. Applicable to all kinds of continuous casting machine flame cutting system. 2. Adopt advanced digital image pickup technology. 3. It is not sensitive to other high-intensity light interference, and overcomes the influence of light sources such as sunlight and arc welding. 4. The system provides abundant interfaces, which can communicate with the PLC control. 5. The fixed-length parameters and data can be directly modified by the secondary system to optimize the fixed-length cutting. 6. Historical cutting data is automatically stored, and the system can set rules for historical data. 7. Support the free transformation of fixed length, and a variety of operation modes are available for the operator to choose. 8. Each stream can send out signals such as pre-clamping, clamping, cutting, roll-up, roll-down and return of the cutting car according to the user's requirements. 9. The monitor displays the running status of the current hot billet in real time and displays the corresponding parameters. 10. Data management can be carried out according to shifts, pouring times, days, weeks, months, etc., as well as data management according to specifications, production capacity, quality, etc. 11. Provide automatic, upper and manual cutting control. 12. The detection and cutting precision is high, and the controllable precision is ±3mm. The extension of the system The system can install 1 to 12 cameras. Generally, when one camera cannot meet the requirements, the system can be equipped with 2 to 12 cameras. The camera can be fixed inside and outside the operating room perpendicular to the roller line, and the setting height is generally 3-5 meters, so that the camera can clearly and completely capture the image of the moving billet. High-definition line scan cameras can also be provided to perform high- precision positioning of each strand of cast products. Line scan cameras are used to support up to 12 strand systems, which ensures that the center of the viewing angle, the billet head, and the fixed-length mark are vertical to improve the cutting and fixed-length accuracy. The technical parameters 1. Numbers of caster stands: maximum 12 strands 2. Measurement accuracy: ±1mm 3. Cutting method: flame cutting 4. Fixed length range: 6-12m 5. Matching casting speed: 1.5~4.2m/s 6. Fixed length range: 6-12m 7. Temperature range of cast products: <1000℃ 8. Number of signals: pre-cut, cut

Minimum Order: 1 bags