Other Wire Mesh

Product Name High-Purity Niobium Mesh Model Nb1 Nb2 Density 8.57 g/cm3 Melting Point 2468 ℃  Characteristic (1) Niobium is a gray white metal with a melting point of 2468 ℃, a boiling point of 4742 ℃, and a density of 8.57 grams per cubic centimeter. Niobium is a glossy gray metal with paramagnetism, belonging to Group 5 of the periodic table. High purity niobium metal has high ductility, but it becomes harder with increasing impurity content. Its outermost electron layer arrangement is very different from the other Group 5 elements. The same phenomenon also occurs on the ruthenium (44), rhodium (45), and palladium (46) elements before and after. (2) Niobium exhibits superconducting properties at low temperatures. At standard atmospheric pressure, its critical temperature is 9.2K, which is the highest among all elemental superconductors. Its magnetic penetration depth is also the highest among all elements. Niobium is one of the three elemental type II superconductors, the other two being vanadium and technetium. The purity of niobium metal greatly affects its superconducting properties. Niobium has a low capture cross-section for thermal neutrons, making it quite useful in the nuclear industry. Application (1) Tantalum niobium mesh can withstand high temperatures, has good strength and stiffness, and is a high-quality material for making heating components, insulation components, and loading vessels for vacuum high-temperature furnaces (2) Tantalum mesh niobium mesh is used in the aerospace industry to produce engine components for aerospace aircraft, rockets, submarines, and more, such as combustion chambers, combustion mesh ducts, turbopumps, and so on. (3) Tantalum wire mesh niobium wire mesh is a high-quality aerospace material used for rocket accelerator nozzles, spacecraft propulsion systems, nozzle valves, and more. (4) Niobium tantalum mesh can be used to make capacitors and lining for armor piercing bullets. (5) Niobium mesh has a small neutron capture cross-section, high thermal conductivity and strength, and is used as a nuclear fuel cladding material, nuclear fuel alloy additive, and heat exchanger structural material in atomic reactors. Contact Information Email:estrellayue@ofolan.com Whatsapp:+86-1 , 3315865785 W.P:+86-13315865785

Minimum Order: 1 bags

Product Name Refractory Niobium Mesh Model Nb1 Nb2 Density 8.57 g/cm3 Melting Point 2468 ℃  Characteristic (1) Niobium is a gray white metal with a melting point of 2468 ℃, a boiling point of 4742 ℃, and a density of 8.57 grams per cubic centimeter. Niobium is a glossy gray metal with paramagnetism, belonging to Group 5 of the periodic table. High purity niobium metal has high ductility, but it becomes harder with increasing impurity content. Its outermost electron layer arrangement is very different from the other Group 5 elements. The same phenomenon also occurs on the ruthenium (44), rhodium (45), and palladium (46) elements before and after. (2) Niobium exhibits superconducting properties at low temperatures. At standard atmospheric pressure, its critical temperature is 9.2K, which is the highest among all elemental superconductors. Its magnetic penetration depth is also the highest among all elements. Niobium is one of the three elemental type II superconductors, the other two being vanadium and technetium. The purity of niobium metal greatly affects its superconducting properties. Niobium has a low capture cross-section for thermal neutrons, making it quite useful in the nuclear industry. Application (1) Tantalum niobium mesh can withstand high temperatures, has good strength and stiffness, and is a high-quality material for making heating components, insulation components, and loading vessels for vacuum high-temperature furnaces (2) Tantalum mesh niobium mesh is used in the aerospace industry to produce engine components for aerospace aircraft, rockets, submarines, and more, such as combustion chambers, combustion mesh ducts, turbopumps, and so on. (3) Tantalum wire mesh niobium wire mesh is a high-quality aerospace material used for rocket accelerator nozzles, spacecraft propulsion systems, nozzle valves, and more. (4) Niobium tantalum mesh can be used to make capacitors and lining for armor piercing bullets. (5) Niobium mesh has a small neutron capture cross-section, high thermal conductivity and strength, and is used as a nuclear fuel cladding material, nuclear fuel alloy additive, and heat exchanger structural material in atomic reactors. Contact Information Email:estrellayue@ofolan.com Whatsapp:+86-1 , 3315865785 W.P:+86-13315865785

Minimum Order: 1 bags

Product Name Nuclear Fuel Tantalum Mesh Model Ta1 Ta2 Densit 16.6 g/cm3 Melting Point 2996 ℃  Characteristic (1) Tantalum mesh has good mechanical properties, stable chemical properties, and a large dielectric constant of the surface oxide film, making it a key modern functional material. The corrosion resistance of tantalum mesh is the same as that of glass. At medium temperatures (about 150 ℃), only fluorine, hydrofluoric acid, sulfur trioxide (including fuming sulfuric acid), strong alkali, and certain molten salts have an impact on tantalum mesh. Its corrosion resistance is better than that of titanium mesh and zirconium mesh. (2) The melting point of tantalum mesh is 2990 ℃, making it the third most refractory metal after tungsten and rhenium. Although tantalum mesh has a high melting point and boiling point, its electron work function is lower than that of refractory metals such as tungsten mesh and molybdenum mesh. Due to its weak ability to emit electrons, it has been applied in electric vacuum technology. Application (1) Tantalum mesh can withstand high temperatures, has good strength and stiffness, and is a high-quality material for making heating components, insulation components, and loading vessels for vacuum high-temperature furnaces (2) Tantalum mesh niobium mesh is used in the aerospace industry to produce engine components for aerospace aircraft, rockets, submarines, and more, such as combustion chambers, combustion mesh ducts, turbopumps, and so on. (3) Tantalum wire mesh niobium wire mesh is a high-quality aerospace material used for rocket accelerator nozzles, spacecraft propulsion systems, nozzle valves, and more. (4) Tantalum mesh can be used to make capacitors and lining for armor piercing bullets. (5) Tantalum mesh has a small neutron capture cross-section, high thermal conductivity and strength, and is used as a nuclear fuel cladding material, nuclear fuel alloy additive, and heat exchanger structural material in atomic reactors. Contact Information M.P:+8613315865785 Email:estrellayue@ofolan , .com Whatsapp:++86-13315865785

Minimum Order: 1 bags

Product Name High Temperature Tantalum Wire Mesh Model Ta1 Ta2 Densit 16.6 g/cm3 Melting Point 2996 ℃  Characteristic (1) Tantalum mesh has good mechanical properties, stable chemical properties, and a large dielectric constant of the surface oxide film, making it a key modern functional material. The corrosion resistance of tantalum mesh is the same as that of glass. At medium temperatures (about 150 ℃), only fluorine, hydrofluoric acid, sulfur trioxide (including fuming sulfuric acid), strong alkali, and certain molten salts have an impact on tantalum mesh. Its corrosion resistance is better than that of titanium mesh and zirconium mesh. (2) The melting point of tantalum mesh is 2990 ℃, making it the third most refractory metal after tungsten and rhenium. Although tantalum mesh has a high melting point and boiling point, its electron work function is lower than that of refractory metals such as tungsten mesh and molybdenum mesh. Due to its weak ability to emit electrons, it has been applied in electric vacuum technology. Application (1) Tantalum mesh can withstand high temperatures, has good strength and stiffness, and is a high-quality material for making heating components, insulation components, and loading vessels for vacuum high-temperature furnaces (2) Tantalum mesh niobium mesh is used in the aerospace industry to produce engine components for aerospace aircraft, rockets, submarines, and more, such as combustion chambers, combustion mesh ducts, turbopumps, and so on. (3) Tantalum wire mesh niobium wire mesh is a high-quality aerospace material used for rocket accelerator nozzles, spacecraft propulsion systems, nozzle valves, and more. (4) Tantalum mesh can be used to make capacitors and lining for armor piercing bullets. (5) Tantalum mesh has a small neutron capture cross-section, high thermal conductivity and strength, and is used as a nuclear fuel cladding material, nuclear fuel alloy additive, and heat exchanger structural material in atomic reactors. Contact Information M.P:+8613315865785 Email:estrellayue@ofolan , .com Whatsapp:++86-13315865785

Minimum Order: 1 bags

Product Name Refractory Tantalum Mesh Model Ta1 Ta2 Densit 16.6 g/cm3 Melting Point 2996 ℃  Characteristic (1) Tantalum mesh has good mechanical properties, stable chemical properties, and a large dielectric constant of the surface oxide film, making it a key modern functional material. The corrosion resistance of tantalum mesh is the same as that of glass. At medium temperatures (about 150 ℃), only fluorine, hydrofluoric acid, sulfur trioxide (including fuming sulfuric acid), strong alkali, and certain molten salts have an impact on tantalum mesh. Its corrosion resistance is better than that of titanium mesh and zirconium mesh. (2) The melting point of tantalum mesh is 2990 ℃, making it the third most refractory metal after tungsten and rhenium. Although tantalum mesh has a high melting point and boiling point, its electron work function is lower than that of refractory metals such as tungsten mesh and molybdenum mesh. Due to its weak ability to emit electrons, it has been applied in electric vacuum technology. Application (1) Tantalum mesh can withstand high temperatures, has good strength and stiffness, and is a high-quality material for making heating components, insulation components, and loading vessels for vacuum high-temperature furnaces (2) Tantalum mesh niobium mesh is used in the aerospace industry to produce engine components for aerospace aircraft, rockets, submarines, and more, such as combustion chambers, combustion mesh ducts, turbopumps, and so on. (3) Tantalum wire mesh niobium wire mesh is a high-quality aerospace material used for rocket accelerator nozzles, spacecraft propulsion systems, nozzle valves, and more. (4) Tantalum mesh can be used to make capacitors and lining for armor piercing bullets. (5) Tantalum mesh has a small neutron capture cross-section, high thermal conductivity and strength, and is used as a nuclear fuel cladding material, nuclear fuel alloy additive, and heat exchanger structural material in atomic reactors. Contact Information M.P:+8613315865785 Email:estrellayue@ofolan , .com Whatsapp:++86-13315865785

Minimum Order: 1 bags

Product Name Tantalum Round Hole Mesh Model Ta1 Ta2 Densit 16.6 g/cm3 Melting Point 2996 ℃  Characteristic (1) Tantalum mesh has good mechanical properties, stable chemical properties, and a large dielectric constant of the surface oxide film, making it a key modern functional material. The corrosion resistance of tantalum mesh is the same as that of glass. At medium temperatures (about 150 ℃), only fluorine, hydrofluoric acid, sulfur trioxide (including fuming sulfuric acid), strong alkali, and certain molten salts have an impact on tantalum mesh. Its corrosion resistance is better than that of titanium mesh and zirconium mesh. (2) The melting point of tantalum mesh is 2990 ℃, making it the third most refractory metal after tungsten and rhenium. Although tantalum mesh has a high melting point and boiling point, its electron work function is lower than that of refractory metals such as tungsten mesh and molybdenum mesh. Due to its weak ability to emit electrons, it has been applied in electric vacuum technology. Application (1) Tantalum mesh can withstand high temperatures, has good strength and stiffness, and is a high-quality material for making heating components, insulation components, and loading vessels for vacuum high-temperature furnaces (2) Tantalum mesh niobium mesh is used in the aerospace industry to produce engine components for aerospace aircraft, rockets, submarines, and more, such as combustion chambers, combustion mesh ducts, turbopumps, and so on. (3) Tantalum wire mesh niobium wire mesh is a high-quality aerospace material used for rocket accelerator nozzles, spacecraft propulsion systems, nozzle valves, and more. (4) Tantalum mesh can be used to make capacitors and lining for armor piercing bullets. (5) Tantalum mesh has a small neutron capture cross-section, high thermal conductivity and strength, and is used as a nuclear fuel cladding material, nuclear fuel alloy additive, and heat exchanger structural material in atomic reactors. Contact Information M.P:+8613315865785 Email:estrellayue@ofolan , .com Whatsapp:++86-13315865785

Minimum Order: 1 bags

Product Name Tantalum Wire Mesh Model Ta1 Ta2 Densit 16.6 g/cm3 Melting Point 2996 ℃  Characteristic (1) Tantalum mesh has good mechanical properties, stable chemical properties, and a large dielectric constant of the surface oxide film, making it a key modern functional material. The corrosion resistance of tantalum mesh is the same as that of glass. At medium temperatures (about 150 ℃), only fluorine, hydrofluoric acid, sulfur trioxide (including fuming sulfuric acid), strong alkali, and certain molten salts have an impact on tantalum mesh. Its corrosion resistance is better than that of titanium mesh and zirconium mesh. (2) The melting point of tantalum mesh is 2990 ℃, making it the third most refractory metal after tungsten and rhenium. Although tantalum mesh has a high melting point and boiling point, its electron work function is lower than that of refractory metals such as tungsten mesh and molybdenum mesh. Due to its weak ability to emit electrons, it has been applied in electric vacuum technology. Application (1) Tantalum mesh can withstand high temperatures, has good strength and stiffness, and is a high-quality material for making heating components, insulation components, and loading vessels for vacuum high-temperature furnaces (2) Tantalum mesh niobium mesh is used in the aerospace industry to produce engine components for aerospace aircraft, rockets, submarines, and more, such as combustion chambers, combustion mesh ducts, turbopumps, and so on. (3) Tantalum wire mesh niobium wire mesh is a high-quality aerospace material used for rocket accelerator nozzles, spacecraft propulsion systems, nozzle valves, and more. (4) Tantalum mesh can be used to make capacitors and lining for armor piercing bullets. (5) Tantalum mesh has a small neutron capture cross-section, high thermal conductivity and strength, and is used as a nuclear fuel cladding material, nuclear fuel alloy additive, and heat exchanger structural material in atomic reactors. Contact Information M.P:+8613315865785 Email:estrellayue@ofolan , .com Whatsapp:++86-13315865785

Minimum Order: 1 bags

Product Name Tantalum Plate Mesh Model Ta1 Ta2 Densit 16.6 g/cm3 Melting Point 2996 ℃  Characteristic (1) Tantalum mesh has good mechanical properties, stable chemical properties, and a large dielectric constant of the surface oxide film, making it a key modern functional material. The corrosion resistance of tantalum mesh is the same as that of glass. At medium temperatures (about 150 ℃), only fluorine, hydrofluoric acid, sulfur trioxide (including fuming sulfuric acid), strong alkali, and certain molten salts have an impact on tantalum mesh. Its corrosion resistance is better than that of titanium mesh and zirconium mesh. (2) The melting point of tantalum mesh is 2990 ℃, making it the third most refractory metal after tungsten and rhenium. Although tantalum mesh has a high melting point and boiling point, its electron work function is lower than that of refractory metals such as tungsten mesh and molybdenum mesh. Due to its weak ability to emit electrons, it has been applied in electric vacuum technology. Application (1) Tantalum mesh can withstand high temperatures, has good strength and stiffness, and is a high-quality material for making heating components, insulation components, and loading vessels for vacuum high-temperature furnaces (2) Tantalum mesh niobium mesh is used in the aerospace industry to produce engine components for aerospace aircraft, rockets, submarines, and more, such as combustion chambers, combustion mesh ducts, turbopumps, and so on. (3) Tantalum wire mesh niobium wire mesh is a high-quality aerospace material used for rocket accelerator nozzles, spacecraft propulsion systems, nozzle valves, and more. (4) Tantalum mesh can be used to make capacitors and lining for armor piercing bullets. (5) Tantalum mesh has a small neutron capture cross-section, high thermal conductivity and strength, and is used as a nuclear fuel cladding material, nuclear fuel alloy additive, and heat exchanger structural material in atomic reactors. Contact Information M.P:+8613315865785 Email:estrellayue@ofolan , .com Whatsapp:++86-13315865785

Minimum Order: 1 bags

Porduct Name Military Zirconium Mesh model Zr-1、Zr-3、R60702、R60705 等 Mesh Size 5Mesh-200Mesh Wire diameterthickness 2.0mm-0.03mm Weaving Method Plain Weave, Twill Weave Density 6.49 g/cm3 Melting point 1850 ℃  Characteristic Zirconium wire woven mesh is a high melting point metal woven mesh with a density of 6.49g/cm3, a melting point of 1850 ℃, and a boiling point of 4370 ℃. The surface of pure zirconium mesh is prone to forming an oxide film, which has a metallic luster and therefore has a similar appearance to steel. Zirconium wire mesh has excellent corrosion resistance, and its corrosion resistance is superior to titanium. It is insoluble in hydrofluoric acid and aqua regia. In high-temperature environments, it can react with non-metallic elements and many metallic elements to form solid solution compounds (such as in the preparation of zirconium nitride wire mesh metal matrix composites) Application The amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength of nuclear grade zirconium mesh can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. The purity of the nuclear grade zirconium mesh provided by Oufulang Rare and Precious Alloy Wire Mesh Company is 99.95%. The surface mesh of the product is uniform, without broken wires or loopholes, with amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength. It can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. Contact Information M.P:+86-13315865785 Email:estrellayue@ofolan.com WhatsApp:+86-13315865785

Minimum Order: 1 bags

Porduct Name Aerospace Zirconium Mesh model Zr-1、Zr-3、R60702、R60705 等 Mesh Size 5Mesh-200Mesh Wire diameterthickness 2.0mm-0.03mm Weaving Method Plain Weave, Twill Weave Density 6.49 g/cm3 Melting point 1850 ℃  Characteristic Zirconium wire woven mesh is a high melting point metal woven mesh with a density of 6.49g/cm3, a melting point of 1850 ℃, and a boiling point of 4370 ℃. The surface of pure zirconium mesh is prone to forming an oxide film, which has a metallic luster and therefore has a similar appearance to steel. Zirconium wire mesh has excellent corrosion resistance, and its corrosion resistance is superior to titanium. It is insoluble in hydrofluoric acid and aqua regia. In high-temperature environments, it can react with non-metallic elements and many metallic elements to form solid solution compounds (such as in the preparation of zirconium nitride wire mesh metal matrix composites) Application The amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength of nuclear grade zirconium mesh can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. The purity of the nuclear grade zirconium mesh provided by Oufulang Rare and Precious Alloy Wire Mesh Company is 99.95%. The surface mesh of the product is uniform, without broken wires or loopholes, with amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength. It can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. Contact Information M.P:+86-13315865785 Email:estrellayue@ofolan.com WhatsApp:+86-13315865785

Minimum Order: 1 bags

Porduct Name Nuclear Grade Zirconium Mesh model Zr-1、Zr-3、R60702、R60705 等 Mesh Size 5Mesh-200Mesh Wire diameterthickness 2.0mm-0.03mm Weaving Method Plain Weave, Twill Weave Density 6.49 g/cm3 Melting point 1850 ℃  Characteristic Zirconium wire woven mesh is a high melting point metal woven mesh with a density of 6.49g/cm3, a melting point of 1850 ℃, and a boiling point of 4370 ℃. The surface of pure zirconium mesh is prone to forming an oxide film, which has a metallic luster and therefore has a similar appearance to steel. Zirconium wire mesh has excellent corrosion resistance, and its corrosion resistance is superior to titanium. It is insoluble in hydrofluoric acid and aqua regia. In high-temperature environments, it can react with non-metallic elements and many metallic elements to form solid solution compounds (such as in the preparation of zirconium nitride wire mesh metal matrix composites) Application The amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength of nuclear grade zirconium mesh can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. The purity of the nuclear grade zirconium mesh provided by Oufulang Rare and Precious Alloy Wire Mesh Company is 99.95%. The surface mesh of the product is uniform, without broken wires or loopholes, with amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength. It can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. Contact Information M.P:+86-13315865785 Email:estrellayue@ofolan.com WhatsApp:+86-13315865785

Minimum Order: 1 bags

Porduct Name Zirconium Circular Mesh model Zr-1、Zr-3、R60702、R60705 等 Mesh Size 5Mesh-200Mesh Wire diameterthickness 2.0mm-0.03mm Weaving Method Plain Weave, Twill Weave Density 6.49 g/cm3 Melting point 1850 ℃  Characteristic Zirconium wire woven mesh is a high melting point metal woven mesh with a density of 6.49g/cm3, a melting point of 1850 ℃, and a boiling point of 4370 ℃. The surface of pure zirconium mesh is prone to forming an oxide film, which has a metallic luster and therefore has a similar appearance to steel. Zirconium wire mesh has excellent corrosion resistance, and its corrosion resistance is superior to titanium. It is insoluble in hydrofluoric acid and aqua regia. In high-temperature environments, it can react with non-metallic elements and many metallic elements to form solid solution compounds (such as in the preparation of zirconium nitride wire mesh metal matrix composites) Application The amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength of nuclear grade zirconium mesh can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. The purity of the nuclear grade zirconium mesh provided by Oufulang Rare and Precious Alloy Wire Mesh Company is 99.95%. The surface mesh of the product is uniform, without broken wires or loopholes, with amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength. It can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. Contact Information M.P:+86-13315865785 Email:estrellayue@ofolan.com WhatsApp:+86-13315865785

Minimum Order: 1 bags

Porduct Name Zirconium Wire Mesh model Zr-1、Zr-3、R60702、R60705 等 Mesh Size 5Mesh-200Mesh Wire diameterthickness 2.0mm-0.03mm Weaving Method Plain Weave, Twill Weave Density 6.49 g/cm3 Melting point 1850 ℃  Characteristic Zirconium wire woven mesh is a high melting point metal woven mesh with a density of 6.49g/cm3, a melting point of 1850 ℃, and a boiling point of 4370 ℃. The surface of pure zirconium mesh is prone to forming an oxide film, which has a metallic luster and therefore has a similar appearance to steel. Zirconium wire mesh has excellent corrosion resistance, and its corrosion resistance is superior to titanium. It is insoluble in hydrofluoric acid and aqua regia. In high-temperature environments, it can react with non-metallic elements and many metallic elements to form solid solution compounds (such as in the preparation of zirconium nitride wire mesh metal matrix composites) Application The amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength of nuclear grade zirconium mesh can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. The purity of the nuclear grade zirconium mesh provided by Oufulang Rare and Precious Alloy Wire Mesh Company is 99.95%. The surface mesh of the product is uniform, without broken wires or loopholes, with amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength. It can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. Contact Information M.P:+86-13315865785 Email:estrellayue@ofolan.com WhatsApp:+86-13315865785

Minimum Order: 1 bags

Porduct Name Zirconium Plate Mesh model Zr-1、Zr-3、R60702、R60705 等 Mesh Size 5Mesh-200Mesh Wire diameterthickness 2.0mm-0.03mm Weaving Method Plain Weave, Twill Weave Density 6.49 g/cm3 Melting point 1850 ℃  Characteristic Zirconium wire woven mesh is a high melting point metal woven mesh with a density of 6.49g/cm3, a melting point of 1850 ℃, and a boiling point of 4370 ℃. The surface of pure zirconium mesh is prone to forming an oxide film, which has a metallic luster and therefore has a similar appearance to steel. Zirconium wire mesh has excellent corrosion resistance, and its corrosion resistance is superior to titanium. It is insoluble in hydrofluoric acid and aqua regia. In high-temperature environments, it can react with non-metallic elements and many metallic elements to form solid solution compounds (such as in the preparation of zirconium nitride wire mesh metal matrix composites) Application The amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength of nuclear grade zirconium mesh can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. The purity of the nuclear grade zirconium mesh provided by Oufulang Rare and Precious Alloy Wire Mesh Company is 99.95%. The surface mesh of the product is uniform, without broken wires or loopholes, with amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength. It can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. Contact Information M.P:+86-13315865785 Email:estrellayue@ofolan.com WhatsApp:+86-13315865785

Minimum Order: 1 bags