Other Wire Mesh

Stainless steel dutch wire mesh is also known as stainless steel dutch woven wire cloth and stainless steel filter cloth. It is usually made of mild steel wire and stainless steel wire.Stainless steel dutch wire mesh is extensively utilized as filter fittings for chemical industry, medicine, petroleum, telecom-communication, scientific research units ,due to its stable and fine filtration capability. Plain Dutch Weave: Woven as a plain weave, but with the warp wires of greater diameter than the weft wires. The weft wires are very close together so that a so-called zero-mesh structure is formed; while the warp wires are thicker. Dutch Twill Weave: Each weft wire passes alternately over two, and then under two successive warp wires and each warp wire passes alternately over two and under two successive weft wires. It is possible to be used to allow a heavier than standard wire diameter. Reverse Dutch Weave: Reverse Dutch Weave. The same weave as Dutch except the warp & weft wires are reversed, i. E the warp wires have a smaller diameter than the weft wires. The larger weft wires are woven closer together than would usually be seen in a Dutch weave.

This kind of corner bead is also called angle bead, provides a finish and protects external raked render angles. Stainless steel and hard PVC are most popular materials for external joint construction applications. Using of corner beads enables adjustment of all thickness renders in construction. Can be made with P.V.C nosing or Fiberglass Mesh Wings. Raked Render Angle Corner Beads have three standard models for render thicknesses of 8, 10 and 15 mm. Using of corner beads for exterior render allows adjustment of render thickness to 6 mm. Technical Description: Sheet Types : Expanded metal or perforated metal. Dimensions: Angle beads have 42 mm wings. Length of angle bead can be 225, 250, 300 cm. Material: PVC, stainless steel, aluminium,etc Color: White in common,other colors are available for PVC, and nature color for metal corner bead. Thickness: 1mm-3mm for PVC corner bead and 0.4mm-1mm for metal corner bead. Width: 20mm*20mm-50mm-50mm Length: 2.4m-3m Packaging: In carton Stainless Steel Angle Beads for Exterior Render with Adjustment of Render Thickness to 6mm This angle bead finishes and protects inside brick. Then the wall angles can be plastered. Technical Description: Materials: Stainless steel sheets. Features: Sharp angle. Expanded metal wings have slots so that the render grips the inside wall perfectly. Dimensions: 25 x 25 mm. Length: 2, 2.5 linear meter Plastic PVC Corner Bead with Fiberglass Mesh Wings for Exterior Rendering: Width: 20mm*20mm-50mm-50mm Length: 2.4m-3m Packaging: In carton Application: Construction and decoration

Metal Mesh Fencing Description: Metal Mesh Fencing an economical version of the panel system, constructed from a Welded Wire Fence with longitudinal profiles that forms a rigid fence.Due to its simple structure ,easy installation and nice appearance,more and more customers regard this product as the preferred common protective fence. Metal Mesh Fencing Introduction: The fence panels are fully welded and 100% hot dip galvanized offering great strength, protection against corrosion and an increadibly long product life. HAIAO FENCING is a professional fence customizing factory with experience of more than 20 years. We provide high quality fence with affordable price, as well as provide trade assurance to ensure that your order be no risk.

Galfan Gabions, or Galfan Coated Gabions are steel wire mesh gabions woven or welded, specially treated with Zn + AL coating offering an excellent corrosion resistance. Galfan gabions have a better propety than zinc galvanized gabions and are widely used in soil retaining, slope protection, especially for offshore areas and long term uses. Galfan coating has two types according to coating material ratio: one is 95% zinc and 5% aluminum or 90% zinc and 10% aluminum coating. GalFan + PVC Coated woven wire mesh gabions, mechanically edged/selvedged Woven, double twisted, hexgonal shaped steel wire Mesh, (Zn90%+Al10%)+PVC coated Popular mesh opening applied: 80x100mm. One diaphragm every one meter (or at 3ft center) is positioned to divide the gabions into cells. This structure makes the whole gabion flexible and easy to handle. This type of woven or knitted mesh gabion has selvedge wire and lacing wire for reinforcement. All mesh panel edges are selvedged with a wire having a greater diameter than the woven or knitted wire. Galfan (95% zinc, 5% aluminum or 90% zinc 10% alum) coating and its benefits: Galfan gabion gets its name from its wire material: a kind of heavy Galfan soft tempered steel . Compared with traditional galvanized steel gabions with pure zinc coating, Galfan gabion features a heavy zinc – aluminum coating layer which enables an excellent corrosion resistance. The corrosion resistance of Galfan gabion doubles that of traditional pure zinc plating. Wire Material Requirements: The pvc coating for Galfan Gabions can be checked below (take an example of the 80x100mm galfan gabion), from the changes of the wire diameter before and after coating: Knitted or woven wire: 3.7mm after PVC coating (2.7mm heavy Galfan before pvc coating) Selvedge wire: 4.2mm after PVC coating (3.2mm heavy Galfan before pvc coating) Lacing wire: 3.2mm after PVC coating (2.2mm heavy Galfan before pvc coating) Zinc plating or galvanization required for the Galfan Gabions: Galvanization on Kitted & Lacing wire: Heavy GALFAN (ZnAL) min 245gr/m2 Galvanization on Selvedge wire: Heavy GALFAN (ZnAL) min 255gr/m2

Gabiony is an element in the form of blocks made of wire mesh nettings of twisted hexagonal opening or welded square or rectangular openings, which is filled with natural stone for river, hill protection or construction. The gabions shall be unfolded on the ground and stretched to the maximum extent possible while ensuring that all creases are in the correct positions for forming the box. Any cutting required shall be carried out so that the cut ends of wire are a minimum of 50 millimetres from the twisted joins. After stretching and cutting as required the side and end panels shall be lifted so that the tops of all sides are level. Any loose ends of wire protruding above a level plane at the top or from the corners shall be bent down into the box. Corners shall be fastened securely and the box shaped prior to commencing any binding. Product Description: Gabiony or gabion, is made of steel mesh with the type 8x10 mesh. The diameter of the wire mesh has normally two types: 2.7 or 3.0 mm. The gabion element is in the shape of block or regular cube size. These special wire bins are made of robust wire, filled with the vibrations at the quarry and transport are accompanied by the lifting straps. Technical Specifications: Gabions sizes: 2m x 1m x 1m, 3m x 1m x 1m, 4m x 1m x 1m, 2m x 1m x 0.5m, 4m x 1m x 0.5m. Custom orders available. Finish can be hot-dipped galvanized, galvanized aluminum alloy or PVC coated, etc. Applications: Gabiony is mainly used in the following fields: Building blocks of gravity walls Forming of gravity walls Reinforced structure (a combination of reinforcing wire mesh containers) Control and guide of water or flood Flood bank or guiding bank Preventing of rock breaking Water and soil protection Bridge protection Strengthening structure of soil Protection engineering of seaside area.

Aerct supplies planted gabion walls system designed for creek slope stabilization uses. We also supply technical support on how to detail, specify, and construct the planted gabion walls. For American and South East Asian market mainly. Wire Mesh for Gabions Wire mesh shall comply with the requirements of SAnS 1580 or equivalent. Wire mesh shall be mechanically pre-fabricated to become a uniform hexagonal woven mesh wherein the joints are formed by twisting each pair of wires through three half-turns (commonly known as double twist), in such a manner that unravelling is prevented. The tightness of the twisted joints shall be such that a force of not less than 1.7 kN is required when pulling on one wire in order to separate it from the other wire, provided each wire is prevented from turning under the applied forces, and the wires are all in the same plane. The diameter of the wire and the size of mesh used shall be as follows: Wire Diameter (mm) Type of Gabion Mesh Size (m m) Mesh Wire Selvedge Gabion Boxes 100 x 120 2.7 3.4 Reno Mattress 80 x 100 2.2 2.7 We make inspections and tests to ensure that the materials supplied are in accordance with this specification. And all materials comply with the requirements of this specification.

Welded Mesh Gabions Architectural Wall Cladding - Retaining Wall for Buildings - Retaining the soil as well as decoration Welded Mesh Panel Gabions are popularly used in architectural and landscape construction by securing the gabions units, which are filled on site with stones or quarry to form the appropriate retaining wall structure, cladding and other landscape design. Filled with natural stone, the welded mesh gabions render a harminous mixing into the settings and landscape and offer a decorative effect to the building. Main types of architectural gabions welded: Galvanized steel, pvc coated or Galfan coated welded gabions. The cages are filled with stone to form a flat container form, then placed one by one and connected firmly to each other with high tensile lacing wire. They are used to build an ancient-feeling cladding for the walls in castles or villa. Welded mesh gabions inner lined with geo-mat can be used for military bastion. Reasons that gabions welded are chosen for architectural wall cladding: a, The welded mesh panel structure gabions are hot dipped galvanized or green plasticized, hence achieve the surface of bright silver or Dark green color or other colors for options. They offers different styles of decorations to the building. You can choose according to your design needs. b, The gabion boxes with hot dipped galvanized steel or plastic coated steel mesh enjoy good corrosion resistance and work for a long time. Hence can form a permanent wall cladding that is maintenance free. It will not collapse even under big scope of deforming. c, The cost of the welded mesh gabions are economic. d, The stone gabions offers a long-time-story-telling feeling and suit all castles. e, The gabions baskets are designed with collapsible structures for filling natural stones. The stones can be easily found anywhere, to save cost and to give a nature decorative effect. f, The gabions wall cladding plays the role of retaining the soil as well as decoration. g, The hexagonal twisted mesh gabions are not suitable for wall cladding as the mesh are flexible and not as solid and strong as welded mesh basket containers.

Embossed Plate and Aluminum Embossed Tread Plate: Patterns, Defination and Types On Embossing Metal Panels: Metal Materials to be Embossed: Aluminum, Stainless Steel, Mild Steel and Brass Embossing Patterns: Embossed plate patterns can be oval, round holes, long holes, diamond or other ornamental designs or patterns. What is Embossing? Embossing is the process used to raise a pattern of copy on the original (normal) surface of metal, paper or leather by the use of matched male and female dies. Embossing changes the nature of the material that has been embossed. More often than not it elevates the standard and quality of the product. Embossing thus makes things more beautiful than they originally are. The simplest of object can become pieces of art worthy of the highest praise by using a technique as easy as embossing. Of course, how good an embossed object looks depends entirely on the quality of embossing. Poor quality embossing can completely kill the appeal of an object. However, good quality embossing can make an object positively breathtaking. Embossing is used for aesthetic purposes as well as functional uses in industries. It is a technique that adds elegance and sensuality to the material surface. Embossed plates are mainly used for industrial tread flooring or architectural designs. Types of Embossing Applied for the Metal Plates: Embossing metal is the procedure by which the metal surface is pushed forward using an embossing die to cause a raised image. There are different types of embossing that can be done. The followings are types used for embossed plates. Types Of Embossing Blind Emboss: A blind emboss is the most popular type for the metal plates either for industrial anti-slippery tread plate or architectural designs. The color of the blind embossed image is the same as the color of the surface. You can also call it a self emboss or same color embossing. Single-Level Emboss: In this kind of embossing, the image area is raised to just one flat level. Embossed Aluminum Plate, One of the Most Popular Embossing Plate: Embossed Aluminum Sheet Sizes and Photos: Temper: O-H112 Sheet thickness: 0.2-5mm Sheet width: 800-1500mm

Checkered steel plate can be divided into three types: checkered carbon steel, checkered galvanized steel and checkered stainless steel plates. Can be supplied in coils or sheets. Galvanized Steel Checker Plate: Galvanized checker plate refers normally to hot dipped galvanized steel plate with zinc coating layer. The galvanizing on the steel sheet surface will help avoid rusting when the checkered steel plate is exposed to moisture environment. The zinc coating amount will meet Chinese or international standard requirements. With a certain degree of slip resistance, good corrosion resistance, beautiful appearance and economic cost, galvanized steel checker plate is widely used in elevator decorative plate, shops decoration, engineering, exterior design of the building, etc Checkered Carbon Steel Plate: This is the base metals for galvanized checker plate, seldom supplied without further coating. It costs less compared with other checkered steel, yet easily get rusty. Stainless Steel Checkered Plate Coils or Cut to Size: 300 Series as most popular materials. General Technical Introduction: Major stainless steel sheet material: SS 300 series, 200 series and 400 series. 200 series: 201,202. 300 series: 301,304,304H,304N,304L,304LN,309S, 310S,316,316Ti,316L,316N,316LN,317, 317L,32 , 1,321H,347,347H. 400 series: 405,409,403, 430,410,420, 440c. Thin gauge 2mm to 6mm; thick gauge 6.00mm to 12.70mm. Stainless steel has good mechanical properties with including excellent corrosion resistance, heat resistance. Standard followed: ASTM,AISI,GB,JIS,SUS,EN,DIN and etc. Hot rolled or cold rolled steel.

Aluminum checkered plate is a light weight metal panel used as architecture decorative panels and metal tread plate. Excellent rust resistance and fire resistance make the aluminum chequered panels high grade building materials in modern architectures: Façade, windows, doors, ceiling panel tiles, decorating panel and curtain walls; Household appliances: refrigerators, microwave ovens, audio equipment, etc. Metal floor Plate: Automobile, airplane, light rail, vehicle steps, stair treads, elevators, etc. Bar Types: Aluminium Checkered Plate can be supplied with diamond pattern checkered in one bar, three bar and five bar styles: Aluminum Alloy Types for Checkered Plates, Different Features and Uses: Aluminum Checkered Plates can be made from major 1000series, 3000series, 5000 series, 6000 series and 8000 series aluminum alloy materials. These aluminium alloy plates offer different features and uses. Details as listed below: Producing Line : We have one 1+2 hot rolling production line, six 2450mm, 2050mm, 1650mm, 1450mm cold rolling lines, two 1650mm foil rolling production lines, two 1850mm continuous rolling production lines and one roll coating production line. These equipment enables us to provide quality checkered plates products for our customers. Aluminum Checkered Plate Popular Specifications: Popular materials: aluminum checkered plate 1100 3003 5052 alloy: 1060 3003 3105 temper: H14 Plate thickness: 1.0mm-6.0mm Plate width:900mm-1500mm Aluminium checkered tread plates: Alloy: 1100,1060, 3003, 5005 5052 Temper: H14,H18,H24,H32 Plate Thickness (mm): 1.5mm to 6mm Width (mm): Up to 1500mm Length (mm): Up to 6000mm Standard: EN standard ASTM standard

Deerway supplies aluminum metals processed in three major forms: embossed, chequered, punched (perforated) . In this page, we mainly introduce perforated aluminum panels. The aluminum perforated sheet metals have less weight compared with stainless steel and the same excellent corrosion resistance. Decorative hole perforated aluminum are mainly used in manufacture of security screen doors and partitions, ceiling and wall panels and other uses. Hole Type: Slotted, Long hole, Square hole, Round hole, Triangle hole, Hexagonal hole, Diamond and Decorative. Slotted Aluminum Metal Sheet Perforated Aluminum Standard Specifications, with Hole Diameter, Staggered Center Distances, Sheet Thickness and Opening Areas: Popular Punched Aluminum Sheet Panels Sizes Examples: Aluminum Sheet Size 1220MM × 2440MM Thickness : 25MM Aluminum Sheet Size 1220MM × 2440MM Thickness : 40MM Aluminum Sheet Size 1220MM × 2440MM Thickness 1.1MM Perforated Aluminum 1220MM × 1200MM Thickness 1.2MM Aluminum Perforated Panels 1220MM × 1220MM Thickness 2MM Aluminum Panel Size 3650MM × 2440MM Thickness 2.5MM Aluminium Slotted Metal Panel Size 1220MM × 2440MM Thickness 5MM

Diamond Chequered Tread Plate ( Non-slippery Tread Plate) Materials, Technical Requirements and Uses Examples Checkered diamond pattern metal sheet is the most widely used and most common anti-slippery tread plate and stair covering material. Diamond tread plate is ideal for walkways. The raised part of the checkered metal plates makes the walking very comfortable. It is equally applicable to many areas, such as walkways, bracket plate, attic, stair treads and so on. It can be used in all slight anti-slip flooring needs. Materials for Anti-skipping tread plate: Iron, stainless steel, galvanized steel, aluminum. Choosing the Right Metal Plate Thickness for Stamping Slip-Resisting Checkered Tread Plate: Stamping chequer process: After two CNC punching, stamping, but not perforated through. To form raised or embossed patterns and designs on one surface of the metal plate, but on holes going through the stamped sheets. Thus the stamped checkered tread plate needs metal sheet material with proper thickness. If the plate is too thin, it will get punched through easily and leave opening on the sheet. If the metal plate is too thick, it is hard to get chequers on the surface. The common metal sheet thickness for checkered tread plate: between 1.2-1.8mm. Tread plates can be checkered plate, perforated metal or expanded metal sheets. Diamond (checkered) plate is one kind of anti-slippery tread plates characterized by beautiful appearance, good strength, light weight, metal material saving and many other advantages. Diamond checkered tread plate has wide range of applications in transportation, construction, decoration, flooring for equipment, machinery, shipbuilding and other fields. In general, the user of diamond tread plate has less requirements for mechanical and engineering performance. The quality requirement for diamond checkered tread plate concentrates on checkering rate, height and depth levels. Currently on the market there are two plate thickness commonly used: 1260,1000 mm. Plate width ranges from 2.0-8mm.

Heavily galvanised steel fencing staples can be used to hold fencing firmly in place throughout its life. Sharp presser point galvanised staples are manufactured with uniform lengths legs and shapes. Fence staples or U nails are made of carbon steel or iron materials finished with galvanizing zinc plating. Well formed Presser Point Staple Nails: Heavily galvanised to standard BS EN10244; Presser point staples enter fence post cleanly and hold well; Widely used in fixing of chicken wire mesh, chain link fence, barbed wire to the fencing posts to form a fencing system. Also used for Posts and wire field fence, in lineal feet of pasture for Goat / cattle and horses raising. Packing: Packed in strong buckets with carry handle 5Kg, 10Kg, 20Kg packs Also available in strong 25Kg cardboard box 40mm x 4.0mm 30mm x 3.55mm 25mm x 2.64mm

Minimum Order: 1 bags

Dongfang as China manufacturers of Metal Fence and Posts, exports Euro type steel posts and Euro Fences. Euro Fence is also known as Holland Mesh or Euro- Mesh, a kind of welded wire fence pre-galvanized and plastic / enamel coated. Our Euro type steel posts are mainly used for construction and installation of Euro fences used in garden boardering. Also called garden fence posts. Product Line: - PVC or Enamel Coated Welded Mesh Fence - PVC-coated or Enamel Coated steel posts Euro L or T types. Available in Green, Yellow, Black, Grey, White and other colors. Mostly green colors. Hot dipped galvanizing treatment for the posts also available. Euro T- Post and Euro L-Post for Green Coated Welded Wire Mesh Garden Fences: Specification 1-3/4" x 1-3/4" x 24"H (Thickness: 3/16") Power Coating in Green Enamel coats. Green PVC Coated Garden Fencing Posts Holland Mesh Fence Euro post fence This series of protective mesh are simple in structure ,economics-aesthetics ,easy to transport ,convenient to install,and suitable for any topography. Material: high quality mild steel wire Wire diameter: normal size 2.5-6.5mm Surface treatment: electro galvanized , Hot-dipped galvanized ,plastic spraying or PVC dipping. Mesh size: 5x10cm 5x15cm 5x20 cm or according to your needs MOQ: one 20ft container Mesh Panel: Using high quality Iron Rod as raw material ,welded them according to certain shape , after galvanization ,powder primer and powder top coating ,it can resist the corrosive and ultraviolet radiation very strongly , the thickness of powder coating is 100-200microns usually ,the wire diameters are 2.0-8.0mm ,it obtains high strong powers to resist the construction Euro fence is simple, the net is welded with high quality galvanized wire, then PVC coated, then through a special column and clipped together, the overall structure is simple and generous. Main market is Europe, and most countries of the world also have some demand

Minimum Order: 1 bags