Wires & Cables

These cables are suitable for installing in dry applications only. They are use in radios, shavers, desk lamps and small portable equipment or use in office machines, hair dryers etc.and for appliances requiring an earth connection. Also suitable for use with double insulated appliances where the cord is not subject to mechanical stress. Conductor: Copper; Solid, Stranded & Flexible; 1~5 Cores Insulation: Polyvinyl Chloride (PVC), Flame-Retardant or Halogen Free Polyolefin, Rubber, XLPE, etc. Sheath: Non-Sheathed or PVC, PE, etc. Features: Solid, Flexible, Round, Flat, Flame-Retardant, Fire-Resistant, Heat- Resistant, Low Smoke and Fume, Low Smoke Zero Halogen, High Temperature Resistant, etc. Rated Voltage: 450/750V or 300/500V Work Temperature: 70°C / 90°C / 105°C / 120°C / 150°C / 200°C / 250°C Colors: Red, Blue, Brown, White, Black, Yellow, Two Colors, etc.

Kobelco EXCAVATOR SK200-8,SK210-8,SK250-8,SK260-8 whole vehicle wiring harness assembly, this list includes 6 commonly used wires, LQ13E01251P1 for low- voltage sensor, LQ13E01186P1 for auxiliary wire connecting fuse box assembly, LQ14E01018P1 for display screen connecting computer board, LQ13E01245P1 for hydraulic pump mainline, LQ13E01246P1 for engine ECU controller, and LQ16E01015P1 for generator.The products are new and unused, and the wiring harness is produced in the proportion of 1:1 according to the original package LQ14E01018P1 The monitor is connected to the controller wire LQ13E01251P1 Walking low voltage sensor wiring harness LQ13E01246P1 Engine ECU wiring harness LQ13E01245P1 Connect the main wire of the hydraulic pump LQ13E01186P1 Connect fuse box wires LQ16E01015P1 Generator harness applicable models SK200-8,SK210-8,SK250-8,SK260-8 < , br> product material fine copper

fuse box cable harness Vehicle Wiring Harness Manufacturer harness supplier in china Solution for Automotive Wiring Harness With years of experience in wire harness manufacturing, Kinkong Wire Harness can provide complete solutions for a wide range of different applications in the automotive industry. We produce wiring harness for engine, light & lamp, sensor, ignition coil, accelerator pedal, fuel injection, car radio, chassis, etc, but not limited to the above mentioned. We’re looking forward to getting inquiry from you. Click here to find out more.  Vehicle Wiring Harness Manufacturer specializes in providing Customized Car Wiring Harness, you have any question on Cable Harness, Automotive Wire Loom, Wiring Loom. We will give the professional answers to your questions.

wire harness assembly with amp connector Wholesale Power Cable Harness Custom Motorcycle Wiring Harness EM4 5 pcs/lot Motec/Haltech ECU 34 Pin/Way Female DTA S60 & S80 Wire Harness Our mission is to provide our customers with super qualified products & services at a low total cost of ownership to help our customers gain a big advantage in this cut-throat competitive contemporary world. To ensure the quick turn around time, we make huge stock of connectors, terminals, wire seals, wires, PVC, clips...at all times to react quickly. We even have our own tooling workshop and 3D prototyping technology to make custom components, which better assists the custom wiring process. Our distinct customized service includes the following: Wire Harness ,Wire Cable, Package, Delivery & Logistics As we position us as a one-stop service solution provider for custom wiring harness, we will follow up your project cases from start to finish. To complete a custom wire harness order with us, here's a quick guide for you to make it easier happen. A.An Inquiry of custom specific wire harness B.Sample/drawing or specific description of the wire harness are required for us to make prototype. C.Engineer's evaluation & Make samples' prototype. D.Organize delivery & Feedback of samples from customer E.Mass production after samples approved. Harness Supplier In China provides Custom Wire Harness Fabrication and oem&odm Motorcycle Wire Harness services. Our innovative team of engineers and advanced ultra-precision mold technology will provide simple and efficient solutions to improve your profitability.

Custom Honda Wiring Harness We are a reliable supplier at automotive connectors, enclosures, casings, terminals & silicon rubber sealings, fuse boxes and the entire wiring/cable assembly, in global automotive top tuning market and after market. Our mission is to customize solutions for both individual customers and companies to help them gain a worldwide competitive market by providing outstanding technologies and supreme qualified products with a total effective cost. Whether you're in search of an integrated wiring assembly or an individual component, our innovative engineer team and adavanced ultra precision tooling technology will provide simple but efficient solutions, increase your profitability. In the meanwhile, it keeps us active and expanding in the related industry area. Wire Harness Manufacturers China is a reliable supplier of automotive connectors, housings, housings, terminals and silicone rubber seals, fuse boxes and entire wire/cable assemblies. Harness Supplier provides Custom Cable Solution.

Network patch cable 1m 1.5m 2m 3m 5m rj45 cat6 ethernet lan cable copper utp cat6 patch cords Home improvement , which is better of cat5e and cat6 network cable? The transmission performance of the CAT-6 cable is much higher than that of the CAT-5, which is best suited for applications with a transmission rate of 1Gbps. In the home network environment, 100M network is mainly used.CAT5 or CAT5E network cable is generally used for short distances.Long distance or from the development trend of gigabit network, you can choose CAT6 network cable. Of course, in terms of price, CAT5 or CAT5E network cable should be more economical.Therefore, the choice of home network cable needs to be determined according to the needs of home network.If both are used for 100M network, choose CAT5 or CAT5E network cable will enough. Cat6 Patch Cord Category Cat6 Specifications 4 pairs Conductor 23AWG ( 7/0.16mm), 24AWG (7/0.12mm) Material Pure copper Shield UTP(Unshielded Twisted Pair) Jacket PVC Color Grey, Blue or Customized Meters 1m 2m 3m 5m 10m 15m 20m 30m 50m or customized Sample Free and freight collect Keyword Cat6 Patch Cord , Computer Patch Cable, UTP Patch Cord

Cable Length: 65cm(approx.) PC Power Supply Reset 2 Switch Cable with 2 LED Lights For POWER reset or switch with HDD and Power guiding Led light. Works with most desktop computer host cases with front panel button. Great as a replacement for your old or damaged Power On Supply Reset Switch. Easy to setup ,just connect the cable into the motherboard , and you can switch on power or reset the motherboard. 2651 wire 28AWG 26AWG 24AWG ; 2 ~ 10 cores IDC 2.54 64 pin ~ 6 pin 2651 PVC Halogen Rree Crosslinked Flat Ribbon Wire Tinned or bare, stranded or solid copper conductor, 40-10AWG, XLPE insulation

Special deep impression of you! Tellsing, we supply cable&wire equipments and technology for all the safe lines manufacturers! 　 Tellsing developing and manufacturing range as　 unders:TSPΦ25,Φ30,Φ40,Φ50,Φ60,Φ70,

4G Mobile Wireless Router 12V 1A Supply WAN LAN Product Description 4G LTE Router LS-9600 is supports both 4G CAT4 and IEEE 802.11 b/g/n protocols, to equip the users enjoying the high speed internet surfing experience. ​Key feature: WCDMA,LTE FDD,LTE TDD Bands Support WAN/LAN/PSTN Internal 2*2 MIMO antennas, super powerful signal TR069 remote management

Product Description 1*XPON+2GE+1POTS 86-Type ONU terminal devices are designed for fulfilling FTTH and triple play service demand of fixed network operators. The panel-type ONU can be easily installed in 86-type electrical boxes on enterprise campuses. These boxes are based on the mature Chipset technology, which have high ratio of performance to price, and the technology of Layer 2/3, and high quality VoIP as well. They are highly reliable and easy to maintain, with guaranteed QoS for different service. And they are fully compliant with technical regulations such as IEEE802.3ah, ITU-T G.984.x and technical requirement of GPON Equipment from China Telecom.

Double Layer Aerial ADSS Cable is used for communication cable of overhead high - voltage electricity transmission system,it also can be used as communication cable at the areas where lighting is frequent or long distance. Characteristics 1: Durable, and High Performance Cable solution for the Electrical Power networks and other Aerial use. 2: Can be Installed with a live line , No need shut down power supply. 3: Can be designed to the longest span is 1000meter or more . 4: Cost Effective solution for short span 5:Meet the demand for high-growth, high-bandwidth networks. 6:Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops. Structure Characters: All dielectric Loose tube wifh mon-metalic strengthen member High flexible amaid yarn Can work at electrix field≤25KV/min a ling period Appicable fieds: 1: Long-distance teecom,LAN in high -votage area or access to telecom network 2: Installation: Sef-support aerial 3: Aerial Application including power transmission and distribution networks 4: Duct Installations 5: Good to use in Electromagnetic fields, no need for expensive cable shielding or grounding accessory Construction: 250μm Colored Fiber PBT loose Tube Tube Filling Compound ( Gel ) FRP central strength member Cable filling compound PE inner sheath Aramid yarn PE outer sheath

GYTA33 is an outdoor communication optical cable of metallic strength member of the loose tube jelly-filled structure, with Al-polyethylene laminated sheath and single-layer thin round steel wire armored polyethylene outer sheath. The loose tubes are made of high modulus plastics (PBT) and filled withwater resistant filling gel. Loose tubes are stranded around the metallic central strength member, cable core is filled with cable filling compound. The corrugated aluminum tape is longitudinally applied over the cable core, and combined with polyethylene (PE) inner sheath. Galvanized steel wires are stranded around inner sheath, and then extruded with PE outer sheath.

DESCRIPTION Fiber optic splice closure FOSC-5016H is a horizontal or inline type closure, 2 inlets and 2 outlets. It belongs to the mechanical pressure seal splice closure system, and it is widely used for the terminations of communication fiber optic cables. Fiber optic closure is a passive component which can provide a great protection for fiber splicing point. Aerially assembling, pipeline assembling and buried underground are all available. The Inline type closure is also called Horizontal closure. The input and output are on the both sides. Inline closure is more suitable for backbone application. Faso provides various shapes closure of Inline type. All the closures we offered are with a great sealing performance. High quality plastic material also ensures the durability whether the closure is in air, in pipeline or buried underground.

Product Description YH 2.0mm Cable Product Name YH2.0 Flat Cable Service OEM and ODM Brand YDR Connector Customize Wire As your request Wire Length 150mm Application Electronic Sample Available Length Custom Length Color Custom