Telecommunications & Networks

Product Description C Band 75/100GHz 400G Coherent Module QSFP-DD ZR 80~120KM for DCI Applications This product is a coherent module, compliant with the OIF 400ZR MSA and QSFP-DD MSA standards, is designed for DCI applications. The digital diagnostics function is available via an I2C interface, as specified by the QSFP-DD MSA. The product is a C-band 75G/100 GHz grid coherent optical module that combines coherent DSP ASIC functionality with best in class ultra-narrow line-width tunable lasers, high speed modulators and high responsively coherent receivers to deliver high performance at 400G 16QAM modulation formats (at 60G baud rate). C Band 75/100GHz 400G Coherent Module QSFP-DD ZR 80~120KM for DCI Applications 0 Features QSFP-DD MSA compliant Compliant with OIF 400ZR, version 01.0, March 10, 2020 Digital diagnostic monitoring support Hot pluggable by 76-pin electrical interface Maximum power consumption 16.5 W 400G 16QAM modulation Compact size (18.4 mm x 93.4 mm x 8.5 mm) LC duplex connector 400GBASE-R, 425 Gbps bit rate 400G-AUI-8 C2M; 8 x CEI-56G-VSR PAM-4 electrical interface Operating case temperature: 0°C to 70°C Single 3.3 V power supply RoHS 2 compliant Optical Characteristics Parameter Min Typ Max Unit Conditions Transmitter Transmitter frequency range 191.3 193.7 196.1 THz TU-T grid. Frequency range over which the specifications hold unless noted otherwise. The frequency is fixed at 193.7 THz for unamplified link applications. Transmitter laser frequency stability -1.8 1.8 GHz Offset from channel frequency set point. The receiver LO has the same frequency accuracy. Transmitter output power -10 -6 dBm Measured at optical connector. Transmitter output power with TX disabled -20 dBm Max Output power with TX_DIS asserted Transmitter output power during wavelength switching -20 dBm Transmitter reflectance -20 dBm Transmitter polarization dependent power Mean I-Q amplitude imbalance 1 dB Transmitter polarization dependent power 1.5 dB Power difference between X and Y polarization Receiver Frequency offset between RX and LO -3.6 3.6 GHz Acquisition Range Input power range -12 0 dBm Input sensitivity (amplified link application) -12 dBm Input sensitivity (unamplified link application) -20 dBm For unamplified link applications, the minimum input power is –20 dBm @receiver OSNR tolerance ≥ 34 dB. OSNR tolerance (amplified link application) 26 dB/0.1nm The OSNR tolerance is referenced to an optical bandwidth of 0.1 nm @193.7 THz or 12.5 GHz. OSNR tolerance (unamplified link application) 34 dB/0.1nm The OSNR tolerance cannot be less than 34 dB for unamplified link applications. Optical return loss 20 dB Optical reflectance at connector input CD Tolerance 2400 ps/nm Tolerance to chromatic dispersion Optical path power penalty 0.5 dB OSNR penalty tolerance due to –35 dB interferometric crosstalk and 2400 ps/nm chromatic dispersion. PMD tolerance 10 ps Tolerance to PMD with ≤ 0.5 dB penalty to OSNR sensitivity. 10 ps of PMD corresponds to max 30 ps of DGD and max 500 ps2 of SOPMD PDL tolerance (amplified link application) 3.5 dB Tolerance to PDL with < 1.3 dB penalty to OSNR sensitivity When change in PSP is ≤ 1 rad/ms. PDL tolerance (unamplified link application) 2.5 dB The PDL tolerance is 2.5 dB in unamplified link application when the reciever OSNR sensitivity penalty is 0.8 dB. Tolerance to change in SOP 50 krad/s Tolerance to change in SOP with ≤ 0.5 dB penalty to OSNR sensitivity. Measurement relative to reference with 10 ps PMD and 2.5 dB PDL and SOP of < 1 rad/ms under the same conditions. Optical input power transient tolerance ±2 dB Tolerance to change in input power with ≤ 0.5 dB penalty to OSNR sensitivity. Received power is within –12 dBm to 0 dBm. Rise/fall times of power change defined by 20%–80% of 50 µs or slower.

PRODUCT DESCRIPTION Luxury Cell Phone Case For iPhone 14 13 7 8 X Xr 11 12 Se 3 Case Leather Wallet Phone Accessories For iPhone 14 Case Card Overview Premium PC materials coated with fine-workmanship PU leather, effectively protect your phone from daily damages Designed with 2 card slots on the back for convenient cards carrying Exquisite stitches show a tidy appearance and durability Precise cut-outs and openings, with easy access to all features Provide full body protection against scratches and drops Packaging & delivery Selling Units: Multiple of 300 Package size per batch: 53X45X39 cm Gross weight per batch: 18.500 kg Package Type: One piece with foam ,into a polybag. 100-300 pcs per carton Lead time: Quantity(pieces) 1 - 300 >300 Lead time (days) 14 To be negotiated Exquisite Leather Phone Cases ODM Luxury Cell Phone Case For IPhone 0 Exquisite Leather Phone Cases ODM Luxury Cell Phone Case For IPhone 1Exquisite Leather Phone Cases ODM Luxury Cell Phone Case For IPhone 2Exquisite Leather Phone Cases ODM Luxury Cell Phone Case For IPhone 3Exquisite Leather Phone Cases ODM Luxury Cell Phone Case For IPhone 4Exquisite Leather Phone Cases ODM Luxury Cell Phone Case For IPhone 5 Exquisite Leather Phone Cases ODM Luxury Cell Phone Case For IPhone 6 Exquisite Leather Phone Cases ODM Luxury Cell Phone Case For IPhone 7

PRODUCT DESCRIPTION PLC fiber optic Splitter 1x8 blockless mini module with fan-out kits LC/APC, SC/APC 1x8 Fiber optic PLC Splitter is also called 1*8 fiber optical plc splitter, optic fiber plc splitter, optical fiber plc splitter, plc fiber optic splitter or plc optical fiber splitter. We can produce the fiber optical splitter with connector or without connector! Fiber optic PLC Splitter Description: PLC splitter are based on Planar Waveguide Technology. They provide a cost effentive and space saving networking solution. They are key components in FTTx networks and are responsible to distribute the signal from central office to numbers of promises. They have very wide range of operatng wavelength from 1260nm to 1620nm. With it’s compact size, these splitters can be utilized in in-gruond and earial pedestals as well as rack mount system. It is used for small spaces can be easily placed in a formal joint boxes and splice closure, in order to facilitate welding, does not need specially designed for spave reserved. Our PLC splitter family features either ribbon or individual fiber output, We provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All splitters provide guaranteed optical performanve and high reliability that meet GR-1209-CORE and GR-1221-CORE requirement. Fiber optic PLC Splitter Options: - 1xN: 1x2, 1x4, 1x8, 1x16, 1x32, 1x64 splits. - 2xN: 2x2, 2x4, 2x8, 2x16, 2x32, 2x64 splits. - Un-connectorized. - Fiber jacketing outside boxes 2mm and up to 3mm. - ABS box type or inside metal box/module cassette type. - SC/UPC, SC/APC, LC/UPC, LC/APC, FC/UPC, FC/APC, ST/UPC, ect connector options. - Custom connector configurations and combinations. Fiber optic PLC Splitter Applications: - Fiber to The Point (FTTX). - Fiber to The Home (FTTH). - Passive Optical Networks (PON). - Gigabit Passive Optical Networks (GPON). - Local Area Networks (LAN). - Cable Television (CATV). - Test Equipment. Fiber optic PLC Splitter Features: - Low insertion loss. - Low Polarization Dependent Loss. - Excellent Environmental Stability. - Excellent Mechanical Stability. - Telcordia GR-1221 and GR-1209.

69KV Voltage Height 35FT 10670MM Octagonal Galvanized Distribution Steel Pole Material: Steel Q345 , Gr50. Yield strength of Material: Minimum yield strength ≥345n/mm2 for Q345 S355 and Gr 50 Pole’s height: 35FT, 10670mm Section 1 Wall thickness: 3.0mm Pole's Shape : Octagonal Power: 69KV Welding Welding in accordance with standard of CWB and AWS D 1.1 Galvanization: Hot dip galvanization with min thickness 86µm on average in accordance with Chinese standardGB/T 13912-2002 or American standard ASTM A123, ISO: 2626-1985. Manufactury Capacity Per Day: 250 pcs Wall thickness Tolerance: +- 0.1mm from 2.3mm to 4mm. +- 0.2mm from 5mm to 20mm. +- 0.5mm from 22mm to 30mm Diameter: 127mm / 248mm Finishing Hot Dip Galvanized Temperature range -35 °C~+45 °C Wind Speed: Aganist wind pressure of 120Km/h to 180Km/h. Install Type Burial Type Design Load: 500 KGS Quality Control According to ISO9001-2008 requirements. Certificates ISO9001-2008, SGS Audited Supplier, The AAA grade certificate. Other Less land occupation & easy maintenance Description 69KV Height 35FT 10670MM Octagonal Galvanized Steel Pole was designed as customer's request. Shape with Octagonal and top diameter 127mm, butt diameter 248mm, thickness 3.0mm. Top design Load 500KGS. Used for 69 kv distribution network. and each container can load around 195pcs. Standard Accessories - Top Cap - Butt Plate - Standard hole on X-X , Y-Y , Z-Z. - Grounding Nuts & Bolts Others Standard poles 25FT, 30FT, 35FT, 40FT,45FT Height (ft) Thickness (mm) Butt Diameter (mm) Tip Diameter (mm) Design Load (kg) Yield Stress (MPA) Zinc Coating (microns) 25 2.5 152 120 300 345 86 30 3.0 226 127 500 345 86 35 3.0 248 127 500 345 86 40 3.0 317 127 500 345 86 45 3.0 328 127 500 345 86 Production Process Raw material test Cutting Bending Welding (longitudinal ) Dimension verify Flange welding Hole drilling Calibration Deburr Galvanization or powder coating or Bituminous painting Recalibration Packages 69KV Voltage Height 35FT 10670MM Octagonal Galvanized Distribution Steel Pole 0 Material Test: 1. All of our material are purchased from famous mill factory to assure the quality. 2. A mill certificate issued by the mill factory with stamp and signature must be provided before unload the material in our factory; 3. Before put into production, all the material must pass the chemical and physical analysis to make sure that they have met the requested strength and component. Galvanized Test: Our hot dip galvanized in accordance with ASTM A123, and the thick min 86 microns on average. 69KV Voltage Height 35FT 10670MM Octagonal Galvanized Distribution Steel Pole 1 69KV Voltage Height 35FT 10670MM Octagonal Galvanized Distribution Steel Pole 2 Terms and Conditions 1. Price Term: EXW, FOB, CFR or CIF. Ø EXW: Poles Cost Ø FOB : Pole Cost + Land Transportation + Fee on Port Ø CFR : Pole Cost + Land Transportation + Fee on Port + Sea Freight Ø C I F : Pole Cost + Land Transportation + Fee on Port + Sea Freight + Insurance. 2. MOQ: One 40FT Container. 3. Payment Term: Typically 30% by T/T as deposit, balance by T/T or L/C at sight before shipment. Other payment way can be negotiated. 4. Delivery Time: 15 working days per container after PI / drawing / prepayment confirmed. 5. Package: Normally wrapped by plastic bags or burlap cloth at the top and bottom,or according to clients’ requirement. Company Introduce: Through the efforts of the company staff, the support and cooperation from all over the world. The company's products have been exported to Philippines, Malaysia, Australia, America, Africa, Latin America, Panama, Suriname, Costa Rica, Colombia, Jordan, Nigeria, etc. We have good export experience and with 1 container export to World in average every day.

100Base FX Multi Mode Rugged SFP GLC-FE-100FX-RGD Cisco Transceiver Module GLC-FE-100FX-RGD Overview The GLC-FE-100FX-RGD is a third-party compatible SFP for Cisco. This 100BASE module will reach 2km and uses a wavelength of 1310nm. All GLC-FE-100FX-RGD are in-system tested in real Cisco routers and switches. This Cisco compliant GLC-FE-100FX-RGD is a 100BASE-FX SFP 1310nm 2km transceiver module. The GLC-FE-100FX-RGD transceiver module provides a low cost high-performance connection. The GLC-FE-100FX-RGD is 100% compatible with all Cisco series switches and modules which support SFP transceivers. Features & Specifications Form Factor: SFP Device Type: Transceiver module Interface (Bus) Type: Plug-in module Connectivity Technology: Wired Application: 100BASE-FX Data Transfer Rate: 100Mbps Wavelength: 1310nm Max Distance: 2km Fiber Type: SMF/MMF Connector: Duplex LC DDM: Without DDM Operating Temperature: 0~70 °C Compliant with MSA SFP Specification GLC-FE-100FX-RGD Specifications Product Name GLC-FE-100FX-RGD Media Fiber Wavelength 1310nm Data Rage OC48 Mode LC Connector Type SM Distance 2km 1310nm 2KM Cisco Transceiver Module 100Base FX Multi Mode Rugged SFP GLC-FE- 100FX-RGD 0 FAQ 1. Where do your products come from? All of our products are from Cisco/Huawei distribution , Cisco/Huawei partner directly. We are Cisco partner at local, with cisco verified certification. 2. If all equioments I can buy service from local cisco ? For all equipments you can buy service from local, because our goods are smart net free, all with clean serial number. 3. How to ship the goods? Lonrise work with DHL,FEDEX,UPS and TNT. Your order will be dispatched by express delivery door to door. 4. What’s your payment term? We always accept 10% advance payment. For long term cooperation, we can consider to apply credit accordingly. Related products SFP-10G-SR SFP-10G-LRM SFP-H10GB-CU3M SFP-10G-ER SFP-10G-ER QSFP-H40G-CU3M QSFP-H40G-CU0-5M QSFP-H40G-CU5M QSFP- 4SFP10G-CU1M

GP-AG500 wireless access product is a wireless access device based on IEEE 802.11ac technology independently developed by Guangpu technology. The utility model has the advantages of rich functions, high performance and high reliability, to meet the needs of WLAN wireless applications in industrial scenarios. GP-AG500 is suitable for AGV, mobile access, wireless coverage, IoT and other related industrial automation scenarios. It can work simultaneously in 2.4GHz and 5GHz frequency band when working in AP mode, and supports IEEE802.11a, IEEE802.11b, IEEE802.11g, IEEE802.11n and 802.11ac five modes, with the highest access rate of 733Mbps. ·Supports 802.11b/g/n and 802.11a/n/ac standards ·Client-based millisecond-level fast roaming ·Diversified access authentication methods ·MAC address cloning ·lntegrated antenna and power supply ·Isolation and protection design

Minimum Order: 1 bags

GP-R650 series industrial grade 5g router is a new generation of wireless router independently developed by our company. It integrates 5g / 4G / 3G, 2.4G and 5.8G WiFi, routing, switching, network management, VPN, firewall, security and other technologies, and provides static routing / dynamic routing, 5g / 4G / 3G dialing, QoS, industrial serial communication and other software features New high cost performance, full function edge network terminal equipment. ·High performance industrial 5g module is adopted ·High performance industrial dual core processor is adopted ·Cold rolled steel shell with sheet metal has good heat dissipation. ·Power supply: from + 7.5V to + 32V DC ·Protection grade: IP40 (can handle to ip51) ·Support port traffic detection ·Support link real-time monitoring ·Support multiple VPN protocols (PPTP, L2TP, IPSec, VPN) ·Support serial port simple DTU function

Minimum Order: 1 bags

GP-AP1200 is a high-performance, high bandwidth, multi-function, outdoor industrial dual band wireless access point that supports both 802.11b/g/n and 802.11a/n/ac standards. The equipment is based on 802.11n MIMO (multiple input multiple output) technology and adopts 2T2R architecture. The maximum bandwidth of dual frequency concurrent operation can reach 1167 Mbps, which can be widely used in medical treatment, underground pipe gallery, etc School, park, scenic spot, playground and other outdoor and outdoor wireless network coverage, fully compatible with 802.11 a / B / g / N / AC protocol client equipment access. ·Supports 802.11b/g/n and 802.11a/n/ac ·Standard fat and thin integrated mode ·Diversified access authentication methods ·IP67 protection level

Minimum Order: 1 bags

GP-XD2200 is a high-performance, high bandwidth, multi-function, carrier class indoor dual band wireless Access Point, which supports 802.11a/b/g/n/ac triple frequency 2400-2483.5mhz/5150-5825mhz working mode. It adopts 1000m network port design and 4dB omni-directional internal antenna indoor coverage. Support 20MHz / 40MHz / 80MHz bandwidth selection, thin and fat switching, cloud platform management; support access signal threshold limit, multi virtual SSID, maximum number of clients and other functions. ·Supports 802.11b/g/n and 802.11a/n/ac standards ·3 * 3mu-mimo wave2.0 architecture ·Integration mode of fat and thin ·Diversified access authentication methods ·Fireproof and flame retardant design of shell ·Wireless access 256+

Minimum Order: 1 bags

GP-XD1200 adopts the latest high pass customized chip optimization algorithm, which has strong anti-interference ability, high bandwidth, high standby capacity and strong stability. At the same time, it supports the integrated mode of fat and thin, graphical fast configuration mode, typical functions: access signal threshold limit, multi virtual SSID, maximum client number limit, VLAN, QoS speed limit rules, WDS, national and regional settings, advanced RF mode, etc. ·Supports 802.11b/g/n and 802.11a/n/ac standards ·Integration mode of fat and thin ·Diversified access authentication methods ·Adopt flame retardant material body design ·Wireless access 128+

Minimum Order: 1 bags

The GP-AG1000 wireless access point product is a wireless access device based on IEEE 802.11ac technology independently developed by GPSENKE technology. The utility model has the advantages of rich functions, high performance and high reliability, which can meet the requirements of WLAN wireless application in industrial scenes. The GP-AG1000 is suitable for AGV, mobile access, wireless coverage, IoT and other related industrial automation scenarios. Operating in AP mode, it can operate in the 2.4GHz and 5GHz bands simultaneously. Supports four modes: IEEE 802.11a, IEEE802.11 b, IE 802.21g, IEE 8021n and 802.8ac. The highest access rate is 1167 Mbps. ·Full support for 802.11ac technology ·Millisecond Seamless Roaming ·MAC address cloning ·Dual Port Design ·IPv4 / IPv6 dual stack ·Wireless channel multi-terminal simultaneous communication ·Hardware encryption and decryption ·Robust design for harsh environments ·Working frequency band: 2.4GHz 5GHz ·Spatial flow number 2 2 ·Bundling: Support 40Mhz,not recommended 80MHz bundling ·MU-MIMO NA Support ·867Mbps (PHY) NA NA ·400Mbps (PHY) Support Support ·A-MPDU Support Support

Minimum Order: 1 bags

The AX5400 router supports the latest IEEE802.11ax protocol standards, which transforms between Ethernet wired data and local wireless LAN data. The MU-MIMO and Beamforming functions guarantee network rate and signal quality for multiple users. In addition to the high-performance WiFi6, the devices also support firewall, QoS, maintenance and management, and other functions to provide stable services for home and small business users. • Support Wi-Fi 6 • Support VPN • Remote management • External high-gain Wi-Fi antenna • Fully directional multi-directional coverage • Support AX5400 rate • Support MU-MIMO • Support MESH networking • Firewall • Multiple filtering rules are supported • Multiple secure encryption protocols • AX5400 Rate 2.4GHz 40MHz 2ss: 600Mbps 5GHz 160MHz 4ss: 4.8Gbps

Minimum Order: 1 bags

GP-AX1800 is a high-speed ,high performance wireless router that provides 2.4G and 5.8GHz dual frequency wireless services.GP-AX1800 support WiFi6 and provid a higher speed & stable wireless access environment for users. • 2.4GHz(674Mbps) & 5GHz(1200Mbps) • Maximum Wireless Throughput • Support Watchdog Hardware Function • Automatically Restored Abnormal • Special Coating for heat dissipation CPU:MT7621DAT+MT7905+MT7975 Flas , h:SPI NOR 8MB DDR:128MB 2.4G Work Frequency:2.4GHz – 2.484GHz 2.4G WIFI Transfer protocol:802.11b / g / n /ax 5G Work Frequency:5.180GHz – 5.825GHz 5G WIFI Transfer protocol:802.11a / n / ac /ax 2.4G Antenna:Build-out antenna Gain: 5dBi 5G Antenna:Build-out antenna Gain: 5dBi Highest Rate:2.4G：574Mbps 5.8G::1200Mbp Support Max access:50+ Indicator Status:SYS,WAN ,LAN , Maximum power consumption:< 15W Product Size:197.7mm*144.2mm*32.4mm Working environment:Working Tempearture: -5°C to 40°C Storage Temperature: -40°C to 70°C Humidity: 5％～95％ ( No-Condensation)

Minimum Order: 1 bags

The AC1200 Wireless Router supports data rates up to 1200 Mbps in 2.4 GHz band & 5 GHz band, and is compatible with IEEE 802.11g/b (WiFi), IEEE802.11n (WiFi 4) & IEEE802.11ac (WiFi 6) wireless devices. Featuring an omni directional antenna design with transmission power up to 100mW, the AC1200 combines the router, wireless access point, switch & firewall functions in a single unit,providing a convenient yet comprehensive network management solution. ·Complies with IEEE802.11n, IEEE802.11ac, IEEE802.11b/g, IEEE802.3i, IEEE802.3u ·Transmission power up to 100mW, which can effectively improve the Wi-Fi coverage ·High speed data rate up to 1200Mbps ·Supports Virtual Server and DMZ ·Supports 64/128-bit WEP encryption and WPA-PSK, WPA2-PSK security ·Supports MAC/IP filtering and URL blocking ·Supports DHCP server and Anti-Dos firewall ·Web user interface (remote configuration), firmware upgradeable Chipset:RTL8197FH+RTL8812FR CPU Frequency:1GHz RAM capacity:64MByte(DDR2) ROM capacity:16MByte(SPI flash) Operating Frequency:2.4GHz & 5GHz Signal Rate:2.4GHz: Up to 300Mbps 5GHz: Up to 867Mbps Button:1*Reset Power Supply:12V/1A adapter Dimensions ( W x D x H ):133*200*25mm

Minimum Order: 1 bags