Offers to Sell

Brass Woven Wire Mesh is woven by H65 (65% Cu, 35% Zn) brass wires or H80 (80% Cu, 20% Zn) brass wires. Compared with copper mesh, brass mesh has lower electrical and thermal conductivity, but better wear resistance and corrosion resistance. The Zn element in the brass mesh makes it harder than the copper mesh, and also has better corrosion resistance and wear resistance. Brass mesh can be widely used in industrial filtration and separation. Mesh can be processed into discs, tubes and other custom shapes. Phosphor bronze mesh is also known as Tin Bronze mesh. Phosphorus is added to help improve its hardness and wear resistance. It has superior strength and ductility compared to other materials. Therefore, it can be used in occasions that require fatigue resistance, wear resistance, and chemical resistance. Widely used in EMI shielding, filtration and screening, decoration, etc. Copper mesh is also called shielding mesh, which is woven from pure copper wire. It has the characteristics of non-magnetic, wear-resistant, good sound insulation, and filtering electron beams. Widely used to screen various particles, powder, china clay, glass, wall sound insulation, electronic display screen. Non ferrous metal woven mesh Feature: Good corrosion and wear resistance. Excellent tensile strength and extensibility. The structure is uniform, and the surface is golden and beautiful. Application field: Screening various particles, powders, china clay, glass, porcelain prints, filter liquids, gases.

Dashang Wire Mesh provides stainless steel pre-crimp mesh, also known as crimped weave mesh or space cloth. It is weave by prior crimped wire materials of grades 304, 304L, 316, 316L, 321, etc. with excellent characteristics of strength and stability. The crimps are made at the points where the weft and warp wires meet to secure the wire, thereby stabilizing the wire mesh and preventing the moving. Generally it has 4 types of weaving: Intermediate Crimp: In this weaving technique, the wires are crimped in a way that the crimps are not as deep as in other crimp styles. This results in a mesh with a relatively smooth surface and a tight weave, making it suitable for applications where a high level of filtration or a smooth appearance is desired. Flat Top Weave: This weave style features a flat top surface, achieved by weaving the wires in a manner that keeps them parallel to each other. This creates a mesh with a smooth, flat appearance, making it ideal for architectural and decorative applications where aesthetics are important. Double Crimp Weave: In this weave, the wires are crimped in both directions, creating a Stainless steel crimped mesh with a tight weave and high stability. This weave style is often used in heavy-duty applications where strength and durability are crucial, such as in security screens and fencing. Lock Crimp Weave: This weave style involves crimping the wires in such a way that they interlock with each other, creating a tight and secure mesh. Lock crimp weave is known for its high tensile strength and stability, making it suitable for applications requiring a strong and durable mesh, such as in mining, construction, and industrial settings.

Stainless Steel Square Wire Mesh is also named square hole woven wire cloth and square wire cloth. Dashang Wire Mesh provides a full range of stainless steel square mesh with opening size range from 25 microns to 20mm (from mesh1x1 to mesh500x500) according to international standard ASTM E2016 and ISO9044 and ISO4873. It is made of high-quality wire materials of grades 304, 304L, 316, 316L, 321, 430, 317L, 904L, etc., woven by warp and weft direction, with excellent characteristics of acid alkali resistance and corrosion resistance. Stainless steel square mesh is the most widely used and common woven mesh. The most common and economic weave type is plain weave and twill weave. Plain weave (1/1) is woven by alternating the weft wire over and under the warp wire, and twill weave (2/2) is that each weft wire passes alternately over and under 2 warp wires, staggered on successive warps. Except plain weave (1/1) and twill weave (2/2), Dashang Wire Mesh also could provide special weave type such as 3 heddles weave (1/2) and 5 heddle weave (1/4), it is used in petroleum and chemical industrial filtration and offers high flow rates. Stainless steel square mesh Characteristic and Applications: Stainless steel contains chromium (Cr), nickel (Ni), and molybdenum(Mo) elements, which make it highly chemically stable. It will not be oxidized, rusted or corroded in air, water, seawater or acid, alkali, salt and other aqueous solutions. Therefore, the stainless steel mesh woven by stainless steel wire has the characteristics of acid resistance, alkali resistance, high temperature resistance, tensile strength and wear resistance, and is especially suitable for screening and filtering under acid and alkali environmental conditions. Such as mud net in petroleum industry, sieve filter net in chemical fiber industry, pickling net in electroplating industry, as well as metallurgy, rubber, aerospace, military industry, medicine, food and other industries, gas, liquid filtration and other media separation. Screening of petrochemical products, quartz sand, ceramics, resin coated sand, etc Production of plastic film and plastic packaging filtration; Screening of chemical product powders such as pharmaceuticals, emery, metal powders, etc

Stainless Steel Dutch Weave Wire Mesh is a kind of stainless steel filter mesh with high filtration accuracy, available in two types: plain dense weave and twill dense weave. Dutch weave mesh is widely used in filtration in petrochemical, pharmaceutical and other fields. Dashang Wire Mesh provides a full range of stainless steel dutch weave wire mesh with filtration range from 300 microns to 1 micron according to ASTM E2814 and GB/T 21648. It is made of high-quality wire materials of grades 304, 304L, 316, 316L, 321, 904L, etc., woven by warp and weft direction, with excellent characteristics of acid alkali resistance and corrosion resistance. Different from the square mesh, the warp and weft wire diameter and mesh No. of the dutch weave mesh are different. Generally, the dutch weave mesh is interwoven with thick warp wires and fine weft wires, and the mesh surface presents vertical and convex stripes. Generally dutch weave could have plain weave and twill weave two types; reverse dutch mesh is the interweaving of fine warp wires and thick weft wires, and the mesh surface presents transverse convex stripes. Its radial wires are more than weft wires per unit area, and the absolute ratio of warp mesh and weft mesh is larger and therefore more difficult to weave. The most common weaving type for dutch woven wire mesh is plain dutch weave, twill dutch weave, reverse dutch weave. There are three kinds of filter degree of dutch weave mesh: nominal filtration, absolute filtration and actual filtration. Nominal filtration and absolute filtration are structural parameters of dutch weave mesh, and it is a fixed value for a certain specification. For all dutch weave mesh, its nominal filtration is its nominal pore size, and its absolute filtration is its absolute pore size. The actual filtration refers to the filtration degree under actual use conditions. It is directly affected by conditions such as temperature, pressure, service time, viscosity of the medium, and bending times of the filter holes. Therefore, the actual degree of filtration is a variable value. Features and applications: Stainless Steel Dutch Weave Wire Mesh has high precision, stable filtration performance, high load strength, high temperature resistance, high pressure resistance, corrosion resistance and other properties. It is suitable for aviation, aerospace, military industry, scientific research and petroleum, chemical fiber, metallurgy, medicine, food and other industries. For the filtration of oils and fats such as palm oil Activated carbon decolorization filtration for sugary liquids, food adsorption clarification filtration such as fruit juice alcoholic beverages It is used for crystal separation in chemical industry, catalyst filtration separation, decolorization filtration, separation of non-soluble sulfur solids and liquids, etc. Used in sintered mesh, plates and industrial filter elements. Filtration for the production of plastic films and plastic containers;

Sintered metal fiber felt (non-woven medium) is made of stainless steel that are non-woven, laminated and sintered at high temperature. Sintered metal fiber felt has a pore gradient formed by layers of different pore sizes, which can be controlled to achieve relatively high filtration accuracy and a large amount of dirt holding capacity. It has the characteristics of three-dimensional network, porous structure, high porosity, large surface area, uniform pore size distribution, etc., and can continuously maintain the filtration effect of the filter mesh. Generally, 10-20 micron metal fiber media is used to filter textile resin; 20- 40 micron metal fiber media is used to filter resin for packaging materials or bottled resin. Sintered Metal Fiber specifications and dimensions: Standard size: 1000mmx500mm 1000mmx600mm 1000mmx1000mm 1 , 200mmx1000mm; Maximum size: 1480mm x 1000mm; Standard material: SUS316L; The dimensions within the above range can be customized according to user requirements. Main performance and application: 1). Large pollution capacity, high filtration accuracy, slow pressure rise, and long replacement cycle; 2). High porosity and excellent permeability, low pressure loss, and high flow rate 3). It is resistant to corrosion, high temperature, acid, alkali, organic solvents, drugs, etc., and can be used for a long time in an environment of 480 ℃; 4). Easy to process, shape, and weld; 5). We can produce reinforced, thickened, reinforced mesh, and various other specifications according to user requirements. Sintered metal fiber felt has excellent filtration performance and is an ideal filtering material that is resistant to high temperature, corrosion, and high precision. It is widely used in polymer filtration, petrochemicals, high- temperature gas dust removal, oil refining process filtration, adhesive filtration, ultrafiltration pre filtration, vacuum pump protection filter, filter membrane support body, catalyst carrier, automotive safety airbags, aircraft and ships, fuel filtration, hydraulic system filtration, etc. https://www.dswirecloth.com/

Product Description Chemical formula: C7H5NaO2 CAS: 532-32-1 Product performance: Sodium benzoate is widely used as a preservative in food processing and preservation. Benzoic acid can play a role in free state in food, so it has a better effect in strong acid food. Benzoic acid is generally used in carbonated drinks, soy sauce, sauces, preserves and fruit and vegetable drinks, etc. Benzoic acid can be used together with p-hydroxybenzoic acid esters in soy sauce and beverage to enhance the effect. Benzoic acid and sodium benzoate are often used to preserve highly acidic fruits, jams, beverage syrups and other acidic food, can be used with low temperature sterilization, play a synergistic role. Sodium benzoate is mostly white particles, no odor or faint benzoin smell, slightly sweet taste; Soluble in water (room temperature) about 53.0g/100ml, pH is about 8; Sodium benzoate is also an acid preservative. 1, mainly used as food preservative, but also used in the production of drugs, dyes, etc 2, used in the pharmaceutical industry and plant genetic research, also used as dye intermediates, fungicides and preservatives 3. Preservative; Antimicrobial agents. 4. Sodium benzoate is also an important acid food preservative. When used, it is converted to the effective form of benzoic acid. See benzoic acid for scope and usage. In addition, it can also be used as a feed preservative. 5. The product is used as food additive (preservative), bactericide in the pharmaceutical industry, mordant in the dyestuff industry, plasticizer in the plastic industry, and also used as intermediate in organic synthesis of spices. Storage: Stockpiled at the ventilated place, avoiding rain, moisture and insolation. Please handle with care to prevent bag damage, store away from toxic substances. Packing: Net 25kg/700kg in Plastic woven bags with PE lining Loading: 16MT/20FCL'; 14MT/20FCL' with pallets Shelf Life: Two years when properly stored

Minimum Order: 1 bags

Main Specification Item No: TD403CNC Worktable size(L×W) 550*360 mm Table travel(X×Y) 400*300mm Z axis travel 370 mm W axis travel 300mm Max distance between work table and guider 400mm Max. drilling speed 30-120mm/min Working liquid pressure 0-10Mpa Max. working current 30 A Electrode diameter 0.15-3.0 mm Max workpiece weight 500kg Max X Y axismoving speed ≥2000mm/min X Y Z driving AC motor of FUJI Japan Move the minimum unit 0.001mm Axis moving control mode Electric wheel Input/output interface USB LAN RS-232 Working solution water Control mode Moving card Screen display 15″LCD touch screen Program MDI CAD LIST Screw compensation Yes Positioning accuracy 0.012 Repeat positioning accuracy 0.006 Power supply 380V /50 Hz Max. Power consumption 3.5 kw Machine dimension 2300*2100*2250mm & , lt; , br> I. Features: 1. Support program from CAD 2. Support USB and LAN 3. Save the programs and no holes limit 4. Industrial PC 5. AC servo motors and balls crews for high accuracy 6. Up to 4 axes can be moved together 7. Precision hole drilling 8. AC servo motors for axes moving II. The machine characteristics : 1.Casting body with good quality 2. All in one design 3. Adjusting control box 4. X Y Z precision Hiwin linear guide from Taiwan 5. All moving by AC motor of Fuji japans 6. Windows friendship interface 7. 3 axis EDM Drilling software 8.Program with AUTO CAD List MDI etc 9.100L stainless water tank with filter and level control system 10. High pressure pump made in Taiwan 11. LCD tough screen 12. Electronic wheel for axis moving 13. Carbide sealing made in Taiwan 14.Guider holder made in Taiwan 15. Guider from Taiwan 16. Marble table 17. Stainless level block

Minimum Order: 1 bags

Product Description Appearance: White crystal powder or granular. Specification: FCC IV Package: 25 kg net in paper carton with plastic bag inner. Application: Used as food additive of cream, salad, fruit, wine, candies. Excellent Preservative Properties Potassium Sorbate can restrain effectively the activity of mould, yeast and aerophile bacteria. Restrain growth and reproduction of the pernicious micro- organism as pseudomonas staphylococcus salmonella action to restrain growth is more powerful than killing. Meanwhile it can not restrain useful microorganism growth as anaerobic spore-bearing bacilli, cidophil therefore to lengthen food store period and remain food original flavor, the preservative efficiency of potassium sorbate is 5-10 times sodium benzoate. High safety Potassium sorbate is one kind of nonsaturated fatty acid compounds. It can be absorbed by human body rapidly, then decomposed into CO2 and H2O, moreover no remaining in body. ADI 0-25mg/kg (based on sorbic acid FAO/WHO 1994) LD50 4920mg/kg (large mouse by mouth) GRAS (FDA, 182.3640 1994) Its toxicity only 1/12 times table salts and 1/40 times of sodium benzoate. Good Stability Potassium Sorbate is stable in sealed status, will not be decomposed until 270 degrees centigrade. It will be oxidized into colored ones and absorbing moisture in case exposed in air for a long time. Wide Application At the moment, Potassium Sorbate has been used extensively in food, drink, vegetables in soy, tobacco, drugs, cosmetics, agricultural products, forage and other domain. Its application should become wider in the world. As acidic preservative, Potassium sorbate is also used well in neutral food(pH6.0-6.5). The preservative efficiency of sodium benzoate will decrease clearly and have a bad taste at pH>4. Application flexibility Potassium Sorbate can be used by direct adding, spraying, retting, dry spraying, using in packing material and other method. Usage As nowadays international prime preferable food preservatives, their extent of use and reference dosage as follows: Soy sauce, marmalades, man-made cream, gelose soft sweets 0.1-1.0 Low-salt preserved vegetables insoy, noodles, candied fruit haw cake, fruit taste juice, tinned food: 0.1-0.5 Fruit juice, fruit drink, grape wine, fruit wine: 0.1-0.6 Carbonated wine, soda water: 0.05-0.2 Dried fish products, drinks of soybean and milk, food of soybean: 0.1-1.0 Cake stuffing locto bacillin drink: 0.1-1.0 Tobacco: 0.6-2 Cosmetics & Toothpaste: 0.6-2 Forage: 0.4-1.5 Exlent color-Our potassium sorbate is made with advanced technology. Problems are lies in solution of yellowish tendency and poor color stability as the usual cases with the traditional technology. Our products boast a pure white color and good color stability. FAQ Q1.What's the payment terms? We could accept T/T, L/C, DP payment terms. Q2.How about the different index of products in same application? Specifications can be customized according to your application. Q3.How about the samples of products? We can provide free samples under 2Kg(not including freight charge). Q4.How about the price of products? Our products are chemical synthesis got from underground brine, which is available for a variety of usage. Our products are high purity with good quality, and the price is based on different specification and quantity. Q5.What's the shelf life for the cargoes? Our product's shelf life is 2 years, which is based on dry and ventilated storage. Q6.What's the package of the cargoes? 20kg/25kg woven bags, within plastic bags, or as customized. Q7.What's the delivery time? We usually deliver the cargoes within 10~20 days after receiving customer's payment or original L/C.

Minimum Order: 1 bags

Name: Diamond Wire Guide for Mitisubishi machine Item No.: M132 Size: Dia0.255mm Accuracy: +/-0.002mm Usage: DD GUIDE 0.25 UP AF2/3 AT (wire guides for Mitisubishi machine)

Minimum Order: 200

Name: Brass EDM Wire Hard type Item No: T-L-BW-H Description: 1. Higher Zinc content ratio brass EDM wire. 2. Higher cutting speed. 3. Superior straightness, suitable for auto threading machines. Item No Diameter (mm) Core Coating Tensile Strength Elongation Color T-L-BW-H 0.15-0.30 CuZn40 - More than 980MPa More than 20% IACS Gloden T-L-BW-S 0.15-0.30 CuZn40 - More than 450MPA More than 22% IACS Gloden Usage: for Japanese wire EDM machines. Name: Brass EDM Wire Soft type Item No: T-L-BW-S Description: 1. High Zinc content ratio brass EDM wire. 2. Suitable for taper cutting . 3. Auto threading in specific condition. Item No Diameter (mm) Core Coating Tensile Strength Elongation Color T-L-BW-H 0.15-0.30 CuZn40 - More than 980MPa More than 20% IACS Gloden T-L-BW-S 0.15-0.30 CuZn40 - More than 450MPA More than 22% IACS Gloden Usage: for Japanese wire EDM machines.

Minimum Order: 100

I). Main Specification: Specification TW120*120 TW12 , 0*160 TW120*200 Travel/space , X/Y axis travel mm 1200*1200 1200*1600 , 1200*2000 U/V axis travel mm A type: 20*20 / (B type: 380*380) Table size L*W mm 1140*1650 , 1200*2200 1200*2400 Max workpiece thickness H mm 500 500 , 500 Taper angle R degree A type:±3°/(B type: ±30°) Roughness Ra(Once cutting) um ≤2.5 Ra(Multi- cutting) um ≤1.0 Precision< , br> * mm ≤0.012 Screw * pcs High precision ball screw Guide way * pcs Steel linear guide way Motor X/Y axis Servo motors Machine dimension L*W*H mm 2600*3300* , 1900 3300*3300*1900 3800*3300*1900 II). Features: WITH THE BEST CONTROL SYSTEM 1. Lowest running cost 2. Reusable molybdenum wire 3. Multiplicity cutting function: better accuracy, better surface finishing 4. DXF, AutoCAD can be read. AutoCAD can be used directly, easier to operate 5. Surface finishing 1.5μ~2.5μ 6. The casting for the main machine bed is equipped with the high rigid HT250, which made by a famous Japanese manufacturer. Integrated structure design, all casting parts are made with the procedure of resin-send and twice heat treatment to improve the max load weight and keep a good precision for long time and avoid the distortion. 7. New designed three layer filter coolant system 8. Industrial computer: more stable, longer using life III). CONTROL SYSTEM Windows XP The controller equipped the auto cut Intelligent software, which integrates the program and control and based on Windows XP. This new designed auto cut software is the unique software for WEDM running on the condition of windows XP. (1)Coordinate system: Absolute coordinate, incremental coordinate (relative coordinate) (2) Functions of coordinate transforming, zooming in and zooming out, rotating and tracking display in real time (3)Functions of interpolation of straight line and circular arc (4)Function of taper processing: As above (5)Function of processing different top and bottom abnormities parts (6)Auto-handle for short circuit and wire-break (7)Functions of memorizing: unexpected power off, it can continue the processing automatically; auto-stop after processing (8)Functions of auto edge-touching position and auto center finding (9)Function of auto-adding transitional arc (Arbitrary angle) (10) Functions of menu technology and auto-programming ward (11)Functions of menu technology and auto-programming (12)AUTOCAD can be used to program directly in the software. 2. Using the PCI slot controller card, LCD Monitor and the High-tech Industrial computer. That greatly enhances the stability of control and greatly reduces the computer the failure rate. 3. Embedded Control system can be connected with many design software smoothly. 4. Variety of pulse power can be chosen, which is suited for a number of processing conditions to improve the cutting ability of the high precision parts. 5. With a large database storage capacity, user can choose the suitable parameter according to deferent working conditions. Users can adjust machining parameters to establish a database at any time according to their own experience IV). CNC system configuration and technical performances (1) CNC Hardware configuration: (A) Industrial Computer:P4 or above (B)EMS memory:1G (C)Fixed Disk:160G (D)USB and Internet (E) 15″liquid crystal display (LCD) (F) RS232 and Keyboard and mouse (2)CNC software and operation platform: (A) CNC Auto-program and control function (B) operation platform: Windows XP (3)CNC technical function: (A) 4 axis processing (B)Function of processing different top and bottom abnormities parts (4)Running environment (A) Temperature: 5-40 degree (B) Relative humidity：40%～80%.

Minimum Order: 1 bags

Parameters of Flushing type wire cut EDM machines Items Unit TF400 , TF645 Mechanical body Travels X/Y/Z mm 400×300×220 645×4 , 50×300 Travels U/V mm 36×36 100×100 Max.Erosion taper * ±6°/(100mm thinkness) ±25°/(80mm thinkness) Dimension of work-table mm 645×490 920×6 , 90 Max.weight of work-piece kg 250 600 , Max.dimension of work-piece (LxWxH) mm 850×700×215 1100 , ×850×295 Diameter of electrode wire mm 0.15-0.30 0.15-0.30 Type of machining * Flushing Flushing , Dimension of the machine mm 1700×2550×2165 2 , 750×2800×2265 Weight of mechanical body kg 2500 3800 Floo , r plan area (WxH) mm 2200×3300 2750×280 , 0 Work tank Dimension of work tank(LxWxH) mm 990×910×270 , 1380×1010×370 Filtration * , Filter paper Filter paper ECO-10N L Resin(20L) Coordinate axes Manual velocity of axes X/Y/Z Four grades Max.: 1.2m/min Double-direction positioning accuracy A of axes X/Y（according to ISO230- 2:1997） 0.008mm whole travel Double-direction positioning accuracy Aof axes U/V（according to ISO230- 2:1997） 0.012mm whole travel Single-direction repeated positioning accuracy of X/Y axes(R↑ or R↓) 0.004mm Single-direction repeated positioning accuracy of U/V axes(R↑ or R↓) 0.006mm Reverse distance of B for X/Y 0.004mm Reverse distance of B for U/V/Z 0.005mm Offset for software pitch offset of X/Y/Z axes Offset space 5mm Offset for software pitch offset of U/V axes Offset space 1mm Ball screw of axes X/Y/Z Φ25mm/ Bolt distance 4mm/ Accuracy C3 Slide screw of axes U/V Φ8mm/ Bolt distance 0.8mm Guide-way of X/Y/U/V/Z Linear ball guide-way The min. resolution (X/Y/U/V/Z) 1μm Deceleration ratio of the belt of X/Y axes 1:04 Deceleration ratio of the belt of Z-axis 1:02 Motor of X/Y/Z AC servo motor Motor of U/V Step-motor Wire-driving system Diameter of wire 0.15/0.20/0.25/0.30mm brass wire Dimension of wire container Max.: Φ160mm Velocity of wire Max.:200mm/s Control the tension of wire when machining Adjusting automatically Wire alignment Automatically Wire installation Manually Wire-through Manually Wire-retract Automati , cally Dielectric tank Filtration One filter paper (accuracy:5μm, dimension:Φ340x450 direction: from inside to outside) Cubage of dielectric tank 300L Type of medium Pure water or distilled water Capacity of resin 20L Water-cooling system 3500W Power of re-cycling pump 0.8Kw Power of high-voltage pump 1.5Kw Power of water-input pump 0.35Kw Cabinet Criterion power 3x380V 50/60Hz 7KVA Fluctuation allowed 380V±10% 50±1Hz Current fully loaded 10A CNC Control system IPC system (Celeron 1.66GHz) Operation system Windows XP Hard disk >80G or CF card>16G Type of input keyboard，USB, LAN Display 15”LCD Language , Chinese/English/Portuguese Controll , ing axe Five axes/Four axes simultaneity Command mode Incremental/absolute Unit Inch/metric Interpolation Linear / arc Mini. Input 0.001mm Max. input 999.999mm The smallest increment 0.001mm Coordinate system Mechanical, 6 users’ coordinate system Offset for pitch error 5 axes Assistance function Suggestive operation/maintenance Format of code ISO Sub-program The most layer: 9 the most nesting: 999

Minimum Order: 1 bags

　　Fluororubber skeleton oil seals, often referred to as FKM oil seals, are essential components in various industrial applications. These seals are known for their exceptional properties and versatile uses. In this article, we will explore the unique characteristics of fluororubber skeleton oil seals, their applications, and the precautions to consider when using them. 　　Properties of Fluororubber Skeleton Oil Seals 　　1. High Temperature Resistance: One of the most notable properties of fluororubber is its ability to withstand high temperatures. These seals can operate effectively in temperatures ranging from -20°C to 250°C, making them ideal for applications involving extreme heat. 　　2. Chemical Resistance: Fluororubber is highly resistant to a wide range of chemicals, including oils, fuels, and solvents. This property ensures that the seals maintain their integrity and performance even in harsh chemical environments. 　　3. Durability and Longevity: The robust nature of fluororubber provides excellent durability and longevity. These seals can endure prolonged exposure to various environmental factors without significant wear and tear. 　　4. Low Compression Set: Fluororubber skeleton oil seals exhibit a low compression set, meaning they retain their shape and sealing capabilities even after being compressed for extended periods. 　　Uses of Fluororubber Skeleton Oil Seals 　　1. Automotive Industry: In the automotive sector, these seals are used in engines, transmissions, and fuel systems. Their high-temperature and chemical resistance make them suitable for sealing components exposed to harsh conditions. 　　2. Aerospace Industry: Fluororubber oil seals are employed in aerospace applications due to their ability to withstand extreme temperatures and aggressive chemicals. They are used in hydraulic systems, fuel systems, and other critical components. 　　3. Chemical Processing: In chemical processing plants, these seals are used to prevent leaks in equipment handling corrosive substances. Their chemical resistance ensures reliable performance and safety. 　　4. Oil and Gas Industry: Fluororubber skeleton oil seals are essential in the oil and gas industry, where they are used in drilling equipment, pumps, and valves. Their durability and resistance to harsh environments make them indispensable. 　　Fluororubber skeleton oil seals are indispensable in various industries due to their exceptional properties and versatile uses. Their high-temperature resistance, chemical resistance, durability, and low compression set make them ideal for demanding applications. By understanding their properties and uses, and taking necessary precautions, industries can maximize the benefits of these remarkable seals. As technology advances, we can expect even more innovative applications for fluororubber skeleton oil seals, further enhancing their value in industrial settings.

Minimum Order: 500

SLS is an anionic surfactant, soluble in water, good compatibility with anionic and non-ionic compounds, It has efficient decontamination, emulsifying and foaming ability with rich and long standing foam, non-toxic and good bio- degradation. Product name: Sodium Lauryl Sulfates/SLS CAS Number: 151-21-3 Molecular Formula: NaC12H25SO4 Molecular Weigh: 288.38 Content: ≥94% or 95% Appearance: White or yellowish powder or needle Package: 20kg/multi-ply bags Compounded with LABSA in a proportion of 1:3, it is used as the detergent for heavy dirty to wash carpet, dishware and hard surface. Widely used in shampoo, bubble bath, hand washing, and the lather agent of toothpaste, cream or powder shampoo. In the other industries fields, it can be used as emulsifier, fire retardant, auxiliary agent of textile, and plating additive, etc.

Minimum Order: 20 square metres