Offers to Sell

The MICH (Modular Integrated Communications) helmet is more practical and comfortable and offers better defense from collisions. MICH is shallower than PASGT and has the visor removed. It is composed of a four-point chinstrap suspension system attached to the inside of the helmet with a series of Velcro, and a seven-pad system with the pad made of two sorts of foam materials. The most crucial feature of MICH is that a duplex communication module can be installed under the earflaps to replace the bulky headset system, thus improving soldier’s battlefield perception and coordination capabilities. With only medium and large sizes, MICH Ballistic Helmet can be adapted to different head shapes with pads in various sizes, which can configure according to buyer’s needs. Features of Mich Ballistic Helmet The Longkui MICH High Ballistic Helmet utilizes the latest ballistic material technology and is designed to exceed expectations for a MICH helmet, providing maximum NIJ standard Level IIIA protection (44 Mag. 240 gr., 1400 FPS) and optimizing comfort and functionality for extended runs. MICH high bulletproof helmet has the following advantages: • Fit suspension system with high ballistic performance • 4 point chin strap harness, with a integrated nape pad • Excellent heat insulation, impact protection • Resistant to water, moisture, flame and chemical corrosion • Light weight and adjustable head circumference • Can be matched with communication equipment and tactical accessories.

The ballistic helmet for PASGT (Personnel Armor System for Ground Troops) is designed to survive direct fire from fragmentation weapons rather than rifle bullets, such as grenades, mines, mortars, explosives, and shotgun shells. A two-layer suspension system is installed in the helmet to keep it 1.3 cm away from the head in order to preserve good ventilation and effectively limit the external impact to protect the head from shock. Our PASGT ballistic helmet is the most affordable ballistic product on the market because it is composed completely of UHMWPE fiber. It is made to stringent NIJ Level IIIA standards, performs excellently against bullets, and is highly effective. PASGT ballistic helmet designed to resist direct shooting of grenades, mines, mortars, and bombs. other fragmentation weapons, 9mm pistols, and shotgun shells, rather than rifle bullets. A two-layer suspension system is installed in the helmet to keep the helmet 1.3cm from the head which helps maintain good ventilation and effectively reduces the external impact to protect the head from shock. The head protection area (medium size) is 1,129 cm². the helmet is resistant to fragmentation impact at a speed of 663 m/s (V50 fragment performance). Our ballistic helmet, composed of pure UHMWPE fiber, is the most cost-effective ballistic material. with excellent bulletproof performance and strictly controlled quality. What makes our PASGT Bulletproof helmet different than those from other helmet providers? Our ballistic helmet stands out with its cutting-edge two-layer suspension system, delivering superior ballistic performance. It boasts a secure 4-point chin strap harness alongside an integrated nape pad, ensuring a comfortable and stable fit. Furthermore, the inclusion of a large rear nape pad significantly enhances overall comfort and helmet stability. The added convenience of a helmet release/closure mechanism equipped with a durable metal stud further exemplifies the reliability and practicality of our helmet, setting it apart in terms of both performance and user convenience. 

 Ultra lightweight and discreet profile Waterproof and moisture-proof ,etc. Breathable cool mesh fabric inside Adjustable Straps Out carrier: Polyester, Cotton or Nylon Bulletproof plate can be inserted Bulletproof vest is a protective equipment used to prevent the damage caused by bullets or shrapnel to the human body. It is mainly composed of a garment and a bulletproof layer. The garment is usually made of chemical fiber fabrics, while the bulletproof layer is composed of single or composite protective structures made of materials such as metal, ceramic tiles, glass fiber, nylon, Kevlar, ultra-high molecular weight polyethylene fiber, liquid protective materials, and polyimide fiber. The bulletproof layer can absorb the kinetic energy of bullets or shrapnel and has significant protective effects against low-speed bullets or shrapnel. It can also reduce the damage to the chest and abdomen of the human body while controlling certain degrees of indentation. The FDY-LK-01 OEM Bulletproof Vest is the hot products. Thanks to excellent ergonomics, it is very comfortable to wear.And the Molle system has strong Load-bearing capacity to carry enough tactical supplies. Although this vest is bulletproof NJI Level IIIA,we still design a hidden pocket to insert the bulletproof plate.The purpose is to allow people in need to upgrade their bulletproof level. https://www.lkarmor.com/

copper waste and scrap

Minimum Order: 1000

Jamaican handmade beaded necklace and bracelet sets. Beaded colors Black, Green and Gold the Jamaican Flag.

Minimum Order: 1 bags

Trenbolone has anabolic and androgenic effects. Once metabolized, tranbolone increases muscle absorption of ammonium ions, thereby increasing the rate of protein synthesis. It also has the side effects of stimulating appetite and lowering the catabolic rate, as people believe in all anabolic steroids; However, once steroids are no longer taken, catabolism may increase significantly. Veterinary use Trenbolone (Trenbolone acetate) improves muscle mass, feed efficiency and mineral absorption in cattle. Side effect Human users sometimes experience events called the "cough series" shortly after or during an injection, where the user experiences a sharp and intense cough that may last for several minutes.

Minimum Order: 1 bags

FNIRSI FNB48S voltmeter ammeter current fast charge tester protocol PD trigger ammeter USB tester QC4 PD3.0 2.0 PPS capacity test tool. FNIRSI-FNB58 PD QC USB tester digital voltmeter ammeter TYPE-C fast charge detection trigger capacity ripple measurement.

Minimum Order: 1 bags

MCH-K305D K303D single channel 0-30V 0-3/5A mini DC power supply, MCH-K303/5D switching power supply with three-digit display, used for repairing mobile phones and laptops. The switching DC power supply adopts a special micro design, which is small in size, light in weight and easy to operate. The regulated switching power supply uses materials that are completely efficient and reliable.

Minimum Order: 1 bags

High Purity Silica Sand Product Description Applying specific quartz mine, High Purity Silica Sand is produced through special pulverizing and purifying process with proprietary technology. The product is featured with superior performance of high purity, low electrical conductivity, accurate size distribution control, low ion content, widely used in quartz glass, optical glass, crucible, spherical silica powder industry. Various size grades of silica sand can be supplied per request. Specification (Size): 20-140mesh, 40-140mesh, 40-200mesh, 60-200mesh, 70-325mesh, etc. Shape: Particles Color: White Performance: Extremely high purity, purity may reach 99.9%, 99.99%, 99.995% Low Chlorine ion Extreme low radioactivity content Technical Index: Item Specification Purity SiO2 99.85~99.995% (customizable) Impurity Fe2O3 1ppm~10ppm(customizable) Al2O3 20ppm~60ppm(customizable) Conductivity EC 1~5μs/cm (customizable) Size Particle Size 20-120mesh, 40-140mesh, 40-200mesh，60- 200meshCustomizable per request

High Reflective Ceramic Granule ——HIREFLE Product Description High reflectance roofing granule is a new energy saving roofing granule specifically designed for building industry by Hebei Chida. It is featured with super high solar reflectance and superior aging resistance, which makes it the ideal material for cool roofing system. It is now widely used in roofing and siding system. Specification: 0.5-2.0mm, 30-70mesh, 325mesh, special grade can be customized per request. Performance: Keeping Building Surfaces cooler. Advantage: Ultra-white High Solar Reflectivity, High UV Opacity Superior Staining Resistance Superior Weathering Resistance Good self-cleaning performance Precise Size Distribution Control Extremely low Dust Low Density, Low Consumption Technical Index Characteristic Solar reflectance Solar reflectance Index Stain Index UV opacity Dust content SR by SSR-ER % SRI * % ΔE** % % PPM Range 82~91 105~115 ≤5 ≥95 ≤300 Typical 88 111 2.5 98.0 100

Mica Powder Product Description Mica is a layered silicate with good elasticity, toughness, insulation, high temperature resistance, acid and alkali resistance, corrosion resistance, and strong adhesion, making it an excellent additive. 20mesh Particle size Bulk density Sand content +20mesh -100mesh 5%max 5%max <0.40g/cc 0.5%max 40mesh Particle size Bulk density Sand content +40mesh -100mesh 5%max 15%max 0.35±0.05g/cc 1%max 60mesh Particle size Bulk density Sand content +60mesh -200mesh 5%max 10%max 0.35±0.05g/cc 1.5%max Shape: Flake or powder Color: White or gray Performance: Mica powder products are widely used in industries such as building materials, resin rubber, engineering plastics, coatings etc. Our company Hebei Chida relies on the rich local mineral resources, Using various types of crushing equipment to produce and supply mica powder products with various particle sizes. especially in the field of low iron and ultrafine mica powder, with our own unique processing technology.

Mullite Sand Powder for Precision Casting Product Description Mullite sand/ Mullite Powder is made from high quality hard clay and processed though high temperature calcination and special processing. The product is featured with excellent casting performance. Specification (Size): 0.1-0.3mm, 0.1-0.4mm, 0.18-0.3mm, 0.18-0.5mm, 0.3-0.7mm, 0.3-0.8mm, 0.425- 0.85mm 0.5-1.0mm, 0.7-1.0mm, 0.7-1.5mm, -120Mesh, -200Mesh, -325Mesh, etc. Special grade can be customized Advantage: Low Thermal expansion coefficient, good collapsibility High chemical stability and corrosion resistance Uniform size distribution, good mold shell performance Low iron and dust content

Ceramic Beads (Foundry Spherical Sand) Product Description Ceramic beads is high grade green casting material, made of high Alumina Calcined Bauxite, processed through fusing, spraying, sieving, get rid of impurity and special procedures. With ideal spherical shape, excellent fluidity and filling property, Ceramic beads is widely used in various sizes of steel/iron/alloy casting parts. It is suitable for various bonds of casting mold and can meet different needs of various customers. Specification (Size): AFS20/AFS30/AFS40/AFS50/AFS55/AFS65/AFS , 75/AFS90/AFS100 Special grades can be customized. Shape: Spherical Shape Color: Grey black Performance/ Advantage: Spherical Shape As the shape is spherical with high density, Ceramic Beads have excellent fluidity and filling character.

contact me, Whatsapp/Telegram: +44 7774201922/zhimu72160337@163.com We are top supplier for CAS 5449-12-7 , we provide best quality, Promotion at lowest price, promise safety delivery.

Minimum Order: 10 long tons