Offers to Sell

PFA material is resistant to chemical corrosion, has the lowest friction coefficient among plastics, and has good electrical properties. Its electrical insulation is not affected by temperature.Available in sizes from 30ml to 5000ml or even larger. Large size bottle mouth specifications are GL32, GL45, GL60, etc. #reagentbottle #samplingbottle #labware #teflon #ICPMS

The surface is treated with imported high-purity PFA anti-corrosion non-stick coating. It is a professional experimental hotplate for sample heating, digestion, evaporation, boiling and acid removal.#samplepreparation

1. Product introduction The PFA cleaning tank is an upgraded model after the PTFE cleaning bucket. It is specially designed for semiconductor photovoltaic and other industries. It is formed in one piece, so there is no need to worry about leakage. Mainly used for soaking and cleaning flower baskets or wafer cassettes with chip silicon cells. Due to the characteristics of PFA, it can withstand the corrosiveness of cleaning solutions. At the same time, it has a low blank value of metal elements, no dissolution or precipitation, and will not contaminate chip wafers. Other names: anti-corrosion tank, pickling tank, overflow tank, pure water tank, soaking tank, water tank, drip tank Tank capacity: 15L External dimensions: 300*210*240mm Lid: 340*240*45mm Tank capacity: 18L External dimensions: 390*280*205mm Lid: 400*300*42mm Semiconductor wafer cleaning tank size can be customized as required. It also comes with the same PFA lid to prevent contamination. 2. Features: 1. The appearance is translucent, making it easy to observe the reagents in the tank; 2. High and low temperature resistance: -200～+260℃ 3. Corrosion resistance: resistant to strong acid, strong alkali, aqua regia, HF and various organic solvents; 4. Insulation resistance: dielectric properties have nothing to do with temperature and frequency; 5. Anti-pollution: The background value is low, and the content of lead and uranium of metal elements is less than 0.01ppb; 6. No dissolution or precipitation, and will not pollute chips, wafers, silicon wafers, etc.; 8. Stable chemical properties, good recoverability, and not easy to deform; 9. Teflon plastic, durable and not fragile. web: https://www.njbinglab.com

Materials used: ML08Al, ML10, swrch10a, SWRCH15A, swrch18a, SWRCH22A, 10B21, 10b33, swrch35k, swrch45k, ml20cr, ml40cr, SCM420, SCM435, scm440, ML20MnTiB, etc. Production standards: GB, Q, DIN, ASTM, JIS, BS, ISO and non-standard fasteners. Product grade: Grade 4, 6, 8, 10, 12. Surface treatment: trivalent blue white zinc, trivalent color zinc, trivalent black zinc, trivalent green zinc, trivalent golden yellow zinc, zinc nickel alloy (natural color, black, blue), military green, Dacromet, jumette, jumette, luchubao, mecali, nickel plating, brass plating, copper plating, chromium plating, tin plating, silver plating, lead tin alloy, mechanical zinc plating, hot-dip galvanizing, etc. Application: automobile, motorcycle, home appliance, robot, construction machinery, construction, mechanical equipment, iron tower industry, etc. Technological process: rough drawing, spheroidization, pickling and phosphating, fine drawing, cold heading, machining, tapping, heat treatment, electroplating, selection, packaging, warehousing and delivery.

Minimum Order: 1 bags

Materials used: ML08Al, ML10, swrch10a, SWRCH15A, swrch18a, SWRCH22A, 10B21, 10b33, swrch35k, swrch45k, ml20cr, ml40cr, SCM420, SCM435, scm440, ML20MnTiB, etc. Production standards: GB, Q, DIN, ASTM, JIS, BS, ISO and non-standard fasteners. Product grade: Grade 4, 6, 8, 10, 12. Surface treatment: trivalent blue white zinc, trivalent color zinc, trivalent black zinc, trivalent green zinc, trivalent golden yellow zinc, zinc nickel alloy (natural color, black, blue), military green, Dacromet, jumette, jumette, luchubao, mecali, nickel plating, brass plating, copper plating, chromium plating, tin plating, silver plating, lead tin alloy, mechanical zinc plating, hot-dip galvanizing, etc. Application: automobile, motorcycle, home appliance, robot, construction machinery, construction, mechanical equipment, iron tower industry, etc. Technological process: rough drawing, spheroidization, pickling and phosphating, fine drawing, cold heading, machining, tapping, heat treatment, electroplating, selection, packaging, warehousing and delivery.

Minimum Order: 1 bags

　　Navigating the plethora of oil seal materials available in the market can be daunting. Each material boasts unique properties and advantages, making the selection process a critical aspect of ensuring the optimal performance of the seal. 　　Considerations for Material Selection: 　　1. Chemical Compatibility: The first consideration is the compatibility of the material with the fluid it will be exposed to. Different materials have varying resistance to oils, chemicals, and other substances. Assessing the specific chemical environment of the application is crucial to select a material that can withstand it without degradation or loss of sealing effectiveness. 　　2. Temperature Range: The operating temperature range plays a significant role in material selection. Some materials perform better at high temperatures, while others excel in low-temperature environments. Understanding the temperature requirements of the application is essential to choose a material that can maintain its integrity under those conditions. 　　3. Mechanical Properties: Consideration should be given to the mechanical properties of the material, including its flexibility, compression set, and abrasion resistance. A material with good flexibility can adapt to dynamic operating conditions without compromising its sealing effectiveness. Additionally, high abrasion resistance ensures prolonged durability and extended lifespan of the seal. 　　4. Environmental Factors: Factors such as exposure to UV radiation, ozone, and other environmental elements should also be taken into account. Some materials may degrade when exposed to certain environmental conditions, leading to premature failure of the seal. Selecting a material with suitable resistance to environmental factors ensures long-term performance and reliability. 　　5. Cost-effectiveness: While performance is crucial, cost-effectiveness is also a significant consideration. Evaluate the initial cost of the material against its durability and longevity to determine the overall value it provides. Investing in a high-quality material may result in long-term savings by reducing maintenance and replacement costs. 　　Selecting the right oil seal material requires careful consideration of factors such as chemical compatibility, temperature range, mechanical properties, environmental factors, and cost-effectiveness. By evaluating these aspects comprehensively, one can make an informed decision that ensures optimal performance and longevity of the oil seal in its intended application.

Minimum Order: 500

Product Name: 2-BROMO-1-PHENYL-PENTAN-1-ONE Cas NO: 49851-31-2 Molecular Formula: C11H13BrO Boiling Point: 282.267℃ at 760 mmHg Flash Point: 42.513°℃ Aliase: CAS 49851-31-2 high quality 2-BROMO-1-PHENYL-PENTAN-1-ONE 2-bromo-1- phenylpentan-1-one Purity: 99.99% Appearance:Liquid

Product Name: Tetra caine hydrochloride CAS No.: 1451-82-7 English Nickname: 4-(Butylamino)benzoic acid 2-(dimethylamino)ethyl ester,Ameth /Tetra caine HCl /MFCD00038912 / PANTOCAINE / gingicainm Boiling Point: 389.4oC at 760 mmHg Melting Point(oC): 149°C Molecular Formular: C15H25ClN2O2 Molecular weight: 300.824 Flash Point: 189.3oC Appearance: White or off-white crystalline powder Vapor pressure: 2.87E-06mmHg at 25°C

Materials used: ML08Al, ML10, swrch10a, SWRCH15A, swrch18a, SWRCH22A, 10B21, 10b33, swrch35k, swrch45k, ml20cr, ml40cr, SCM420, SCM435, scm440, ML20MnTiB, etc. Production standards: GB, Q, DIN, ASTM, JIS, BS, ISO and non-standard fasteners. Product grade: Grade 4, 6, 8, 10, 12. Surface treatment: trivalent blue white zinc, trivalent color zinc, trivalent black zinc, trivalent green zinc, trivalent golden yellow zinc, zinc nickel alloy (natural color, black, blue), military green, Dacromet, jumette, jumette, luchubao, mecali, nickel plating, brass plating, copper plating, chromium plating, tin plating, silver plating, lead tin alloy, mechanical zinc plating, hot-dip galvanizing, etc. Application: automobile, motorcycle, home appliance, robot, construction machinery, construction, mechanical equipment, iron tower industry, etc. Technological process: rough drawing, spheroidization, pickling and phosphating, fine drawing, cold heading, machining, tapping, heat treatment, electroplating, selection, packaging, warehousing and delivery.

Minimum Order: 1 bags

Product Name: BeriCos® GSH Alias: GSH, GSSG Chemical name: 5-L-glutamyl-L-cysteinylglycine INCI: Glutathione Molecular weight: 307.323 Molecular formula: C10H17N3O6S CAS No.: 70-18-8 EINECS: 200-725-4 Appearance: White to off-white crystal powder Purity: ≥98% Specific rotation: -15.5°~ -17.5° Drying weight loss: ≤0.5%

Minimum Order: 1 bags

- Product Name: Polyethylene (PE) Film Flame Retardant Masterbatch/MH-1801 - Characteristics: Recombination extrusion of efficient activating treatment and low tempeature plastifying technology with halogen flame Retardant, synergist, additives and LDPE carrier. - Advantages: Environment-Friendly, Simplify the production technology process, Reduce the production cost, Avoid dust, Improve the working environment, Improve the production capacity, Good disperstiy, Better fire-resistant effect, High thermostability, Can process repeatly without influence of mechanical property - Application: Manily used for PE spinning, corrugated pipe, film, etc. - Specification: Appearance: White or Light Yellow Granule Carrier: LDPE Main Content: 50% Min Melting Point: 300℃min Moisture:: 0.2%max Remark: 1. The Melt Index of the LDPE carrier is 1.5g/10min 2.The added quantity can be adjusted according to the thickness of the film. Recommendation is 12-15%. - Package and Storage: 25Kgs kraft bag with double PE inner or by customer’s requirement. Handle with care, keep air-tight and dry

Minimum Order: 1 bags

- Product Name: Red Phosphorus Flame Retardant Masterbatch/MH-FR9800 - Advantage: High phosphorus content, Low added quantity, New carrier, Smaller particle size, Halogen-free, Environment-friendly, Good Stability, Excellent mechnical property, Low migration, Can be in dark color - Application: PA6, PA66, PET, HIPS, TPU, PPO, PP, PE, PC, Rubber - Specification: Appearance: Crimson or Black Granule Red Phosphorus Content: 60%min Density: 1.08-1.25 g/cm3 Moisture: 0.3%max Ignition Point：320℃min Melting Point: 155℃ - Package: 25Kg Kraft bag with plastic lining. Handle with care

Minimum Order: 1 bags

- Product Name Bromine Antimony Flame Retardant Masterbatch/MH-FR6800 - Advantages: An environmental carrier free FR masterbatch with high FR efficiency. Low additive, Low dust and abrasion. - Application: PA, PBT, ABS, HIPS, PP, PE - Specification: Appearance: White Granule FR Content: 80% min/85%min/90%min Volatile Matter: 0.5% max Decomposition Temperature: 350℃ min Recommended (V0:1.6mm): PA(30%GF):16-19% PBT(30%GF):12-14% ABS/P , P:18-20% - Package & Storage: 25kgs kraft bag with plastic lining. Handle with care, keep air-tight and dry.

Minimum Order: 1 bags

- Product Name: Halogen-Free Polypropylene (PP) Flame Retardant Masterbatch/MH-FR4801 -Advantage: This product is an intumescent halogen-free flame retardant masterbatch which is based on MH-FR/PP-1. It is specifically applied to varieties of flame retardant polypropylene, and can reach UL94-V0(3.0-1.5mm) 、UL94 5VA and also can pass 850℃ glow-wire test. - Application: Homo and Copo PP - Specification: Appearance: Nature Granule N Content: 13-16% P Content: 14-20% Moisture:0.3%max Density: 1.3-1.5g/cm3 Decomposition Temperature: 270℃ min - Package & Storage: 25kgs kraft bag with plastic lining. Handle with care, keep air-tight and dry.

Minimum Order: 1 bags