Offers to Sell

JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2:2013 Degrees of protection provided by enclosures(IP Code), IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication test organization for the products such as electrical & electronic products, LED luminaires as well as in the relevant quality control department for the waterproof detection of the enclosures protection grades. The whole JL-X waterproof test system includes: • Drip Box (JL-12): The drip box is for IPX1 and IPX2 drip test. The drip box size is 800x800x45mm (LxWxH). The diameter of drip hole is 0.4mm. The distance between drip holes is 20mm. The sample can be over 150kg. • Swing Pipe Water Spray Test Equipment (JL-34): It is for IPX3 and IPX4 waterproof test. The semi-diameter of swing pipe is 1meter (Any other size is also available). The inside diameter of the swing pipe is 15mm. The sample rotating table diameter is 1000mm (Or other size according to the diameter of the swing pipe), and the height is adjustable. The rotation speed is 1~5rpm which controlled by PLC panel. • Waterproof Jet Test Device (JL-56): With water supply device size is 1000x1000x600mm, the nozzle diameter is ф6.3mm (IPX5 waterproof test ) and ф12.5mm (IPX6 waterproof test). The water speed is 12.5 ±0.626L/min for IPX55 and 100 ±5L/min for IPX6 • Immersion tank Waterproof test Device (JL-7): It is for IPX7 waterproof test. The water tank size is 1000x1000x1200mm (Other size can be designed according to your request). It can test samples up to 120kg. • Immersion tank Waterproof test Device (JL-8): It is for IPX8 test. It can simulate a water depth of 0~50m. The water immersion tank diameter is 600mm and the height is 1200mm. The compressive stress is 10 atmospheres or design according to customer's request.

Minimum Order: 1 bags

LSRF-3 Lamp start, Run-up time and Light Flickering Analyzer - Flicker Tester is equipped with Class A fast photometric probe, so the sampling speed is up to 100kHz. It fully meets the requirement of BASIC, Energy Star V2.1, IEC TR 61547-1:2020 IEC-Pst, CA CEC, ASSIST, CIE TN006-2016 CIE SVM, IEEE Std 1789 standards, etc. It is professional for flicker test of LED lights and lamps, energy-saving lamps, etc. According to EU directives 1194/2012, 2009/125 / EC, SASO2902, COMMISSION DELEGATED REGULATION (EU) 2019/2015, COMMISSION REGULATION (EU) 2019/2020 and IEC60969 "Self-ballasted Lamps for General Lighting Services-Performance Requirements" and other requirements. The LSRF-3 can connects with PC via USB cable. The English version software can be run in Win7, Win8 and Win10, Win11 (The driver was Certificated by Microsoft) Lamp Flicker test interface needs to work with LISUN Integrating Sphere, DC Power Source and Standard Light Source, it also can be added in LISUN LPCE-2 /LPCE-3 Integrating Sphere System or LSG-6000/LSG-1890B/LSG-1800A Goniophotometer or LSG-6000CCD/LSG-1890BCCD/LSG-1800ACCD Goniospectroradiometer.

Minimum Order: 1 bags

What is goniophotometer definition? LSG-1890B/LSG-1800A goniophotometer is automatic goniophotometric instrument for luminous intensity distribution measurements with facility for rotating the light source. The LSG-1890B/LSG-1800A uses a constant temperature detector, Japanese motor and German precision angle coder which keep the test results with high accuracy. It is for industrial laboratory photometric data measurement of all kinds of luminaries such as LED luminaries, HID lamps, fluorescent lamps and so on. Standard: Full meet the EN13032-1 clause 6.1.1.3 goniophotometer type 1, COMMISSION DELEGATED REGULATION (EU) 2019/2015, CIE-70, CIE-121, IES LM-79, IES LM-75, IES LM-80 and ect. Measurement: Luminous Intensity Data, Luminous Intensity Distribution, Zonal Luminous Flux, Luminaries Efficiency(Option),Luminance Distribution,Coefficient Of Utilization, Luminance Limitation Curves Glare, Maximum Ratio of Distance to Height, Equal Illuminance Diagrams, Curves of Luminaires VS Lighting Area, Isocandela Diagrams, Efficient Luminescence Angle, EEI, UGR, etc. Specification: • The goniophotometric instrument can do the B-β test with two pillars and the C-γ test with single pillar & multi-function jigs • Test Max Luminaires size and weight: LSG-1890B is 2000mm/60kg and LSG-1800A is 1600mm/50kg • The tested luminaries rotates around an angle of (γ)±180°(or 0-360°) and the tested luminaries rotates around itself with an angle of (C)±180°(or 0- 360°) • Luminosity Testing Range: Illuminance 0.01lx~99,999lx; Light Intensity 1.0cd~10^7cd (detector) • Angle accuracy: LSG-1890B is 0.1°, LSG-1800A is 0.2° • Photometry Accuracy: CIE Class A (Class L is option) • Testing Accuracy: 2%(Under Standard lamp); Stray Light: less than 0.1% • English version software can run in Win7, Win8 or Win10, Win11 • LISUN goniophotometer software can export CIE, IES, LDT and other format files. These kinds of format files can be transferred by other illumination and luminaire design software such as DiaLux. What are the types of goniophotometer? The types of Goniophotometers can be basically divided into Type A, Type B and Type C. For a detailed description, please refer to the 1987 edition of CIE 70. The difference between them lies in the way the lighting equipment rotates during the measurement and the photometric data obtained during this measurement. How does goniophotometer measures? Goniophotometer is a device used to measure the light distribution performance of lamps. Goniophotometer measures the spatial light intensity distribution of lamps or light sources, total luminous flux and lamp efficiency and other parameters. Goniophotometer need to work in larger darkroom. Use low-reflectivity materials in the room to avoid reflected light from entering the probe. Depending on the arrangement of the measuring light path, two measurement schemes can be used to measure the luminous flux: the illuminance integral method and the luminous intensity integral method.

Minimum Order: 1 bags

EMI receiver system for EMI (Electromagnetic Interference) radiation conduction or conducted emissions testing. The EMI-9KB EMI receiver is produced by the full closure structure and strong electro-conductibility material, which has high shielding effect. Due to the new technology for the EMI Test System, it solved the instrument self-EMI problem. The test results are according to the international format test report. The EMI Test System EMI-9KB fully meets CISPR15:2018, CISPR16-1, GB17743, FCC, EN55015 and EN55022. System Configurations: • EMI-9KC Test System includes: EMI-9KC EMI Receiver built-in Attenuator (9K- 1GHz), LISN-A Artificial Network Power (16A with RS-232 communicate), CDNE-M316 Coupling/Decoupling Network for Emission, 3pcs Isolation Transformers and cables. • EMI-9KB Test System includes: EMI-9KB EMI Receiver (9K-300MHz), LISN-A Artificial Network Power (5A), CDNE-M316 Coupling/Decoupling Network for Emission, 3pcs Isolation Transformers, Attenuator and cables. • EMI-9KA Test System includes: EMI-9KA EMI Receiver (9K-30MHz), LISN-A Artificial Network Power (5A), 3pcs Isolation Transformers, Attenuator and cables. Option instruments to work with the EMI-9KC, EMI-9KB and EMI-9KA EMI receivers: • LISUN LSP-500VARC/LSP-1KVARC Pure Sine Wave AC Power Source for EUT • LISUN SDR-2000B Magnetic Shielding Cabinet for the EMI Receiver System • LISUN VVLA-30M Three Loop Antenna to test 9k-30MHz Radiation • LISUN AB-CLP Absorbing Clamp to test the Home Applications & motor tools Specification: • Detection frequency range: 9kHz~1GHz (EMI-9KC), 9kHz~300MHz (EMI-9KB), 9kHz~30MHz (EMI-9KA) • Frequency stability: 1×10^-6 • Frequency resolution: (9kHz~150kHz) 30Hz; (150kHz~30MHz) 1kHz • Test Tolerance: ±2 dB • Measure and Detection method: PK, QP and AV • Measure range from 20dBμV to 140dBμV • Frequency scanning step length: 20Hz~2MHz • Sweep bandwidth: 200Hz; 9kHz; 120kHz • Connect PC via USB cable and software can run on Win7, Win8 and Win10, Win11 What is EMI receiver? Electromagnetic Interference (EMI receiver) is electronic noise that interferes with cable signals and reduces signal integrity. EMI Receiver is usually generated by electromagnetic radiation sources such as motors and machines. EMI Receiver (Electromagnetic Interference) has two types: conducted interference and radiated interference. Conducted interference refers to the coupling (interference) of signals on one electrical network to another electrical network through a conductive medium. Radiated interference refers to the interference source coupling (interference) its signal to another electrical network through space. How to test EMI Interference? Electromagnetic disturbance that degrades the performance of electrical equipment or electronic device, works abnormally or fails. It can be divided into conducted interference test and radiated interference test. LISUN EMI-9KB is an automatic EMI receiver system for EMI (Electromagnetic Interference) radiation conduction or conducted emissions testing. It can do both conducted interference test and radiated interference test. What's the difference between EMI and EMS? EMC (Electro Magnetic Compatibility) literally translates to "electromagnetic compatibility". EMI (Electromagnetic Interference) "Electromagnetic Interference" can be understood as attack type. There are two types of EMI, conducted interference and radiated interference. EMS (Electro Magnetic Susceptibility) literally translates to "electromagnetic sensitivity", which we can understand as defensive type, which means the ease of performance degradation due to electromagnetic energy. Noted: According to latest CISPR15:2018 standard, you need to use CDNE-M316 (Coupling/Decoupling Network for Emission) to instead the CDN. The CDNE-M316 worked with EMI receiver system is equivalent to test radiated electromagnetic disturbance of electric lighting appliance with frequency from 30M-300mHz

Minimum Order: 1 bags

Product Description The SG61000-5 fully automatic surge generator (also called lightning surge immunity test, combination wave generator, surge current generator/surge voltage generator, combined surge voltage and current generator) . How does a surge generator work? The SG61000-5 surge generator provides a common basis for evaluating the resistance of power cords and internal connectors of different equipment to high energy transient interference caused by natural lightning surge induction and large capacity load switching. It fully meets the IEC 61000-4-5, EN61000-4- 5 and GB/T17626.5 standards.

Minimum Order: 1 bags

LPCE-2 Integrating Sphere Spectroradiometer LED Testing System is for single LEDs and LED lighting products light measurement. LED's quality should be tested by checking its photometric, colorimetric and electrical parameters. According to CIE 177, CIE84, CIE-13.3, IES LM-79-19, Optical-Engineering-49-3- 033602, COMMISSION DELEGATED REGULATION (EU) 2019/2015, IESNA LM-63-2, IES-LM- 80 and ANSI-C78.377, it recommends to using an array spectroradiometer with an integrating sphere to test SSL products. The LPCE-2 system is applied with LMS- 9000C High Precision CCD Spectroradiometer or LMS-9500C Scientific Grade CCD Spectroradiometer, and A molding integrating sphere with holder base. This sphere is more round and the test result is more accruacy than the traditional integrating sphere. Measures: • Colorimetric: Chromaticity coordinates, CCT, Color Ratio, Peak Wavelength, Half Bandwidth, Dominant Wavelength, Color Purity, CRI, CQS, TM-30 (Rf, Rg), Spectrum Test • Photometric: Luminous Flux, Luminous Efficiency, Radiant Power, EEI, Energy Efficiency Class, Pupil Flux, Pupil Flux Efficiency, Pupil Factor, Cirtopic Flux, Plant Growth Lamp PAR and PPF • Electrical: Voltage, Current, Power, Power Factor, Displacement Factor, Harmonic • LED Light Decay Test according to LM-80: Flux VS time, CCT VS time, CRI VS time, Power VS time, Power Factor VS time, Current VS time and Flux Efficiency VS time. Option: The LPCE-2(LMS-9000C) or LPCE-2(LMS-9500C) work with a IS-1.5MT Constant Temperature Integrating Sphere and TMP-8 Multiplex Temperature Tester can fully meet IES LM-82 High Precision LPCE-2(LMS-9000C) System Configuration (It is suitable for the Middle & Small Manufactory or General Test Lab): High Precision CCD Spectroradiometer (LMS-9000C), Optical Fiber (CFO-1.5M), Digital Power Meter (LS2050B/LS2050C/LS2012), DC Power Source (DC Series), AC Power Source (LSP-500VARC or LSP-500VARC-Pst), Integrating Sphere (IS-1.5MA and IS-0.3M), Standard Light Source (SLS-50W and SLS-10W), 19 Inch Cabinet (CASE- 19IN). You can download the detail PDF here: LPCE-2 (LMS-9000C) High Precision CCD Spectroradiometer Integrating Sphere System Brochure Specification: • Spectral Wavelength Accuracy: ±0.3nm, Wavelength Reproducibility: ±0.1nm • Sample Scanning Steps: ±0.1nm • Accuracy of Chromaticity Coordinate (Δx, Δy): ±0.002 (under Standard A Lamp) • Correlated Color Temperature CCT: 1,500K~100,000K, CCT Accuracy: ±0.3% • Color Rendering Index Range: 0~100.0, Accuracy: ±(0.3%rd±0.3) • Luminous Flux Range: 0.01-200,000lm; Photometric linear Accuracy: ±0.5% • Stray light: <0.015%(600nm) and <0.03%(435nm) • Integration Time: 0.1~10,000ms • It can measure the temperatures inside and outside of integrating sphere • Flux testing method: spectrum, photometric and spectrum with photometric revision • The system includes the auxiliary lamp device and the software includes self- absorption function • It can measure the temperatures inside and outside of integrating sphere • Connect with PC via USB cable. The English version software can be run in Win7, Win8, Win10 and Win11 (The driver was Certificated by Microsoft) • The LM-79 Photometric, Colorimetric and Electricity report can be exported PDF and LED Optical Maintenance test report can be exported Excel or PDF. Scientific Grade LPCE-2(LMS-9500C) System Configuration (It is suitable for the Big & Middle Manufactory or Third Party Test Lab): Scientific Grade CCD Spectroradiometer (LMS-9500C), Optical Fiber (CFO-1.5M), Digital Power Meter (LS2050C), DC Power Source (DC Series), AC Power Source (LSP-500VARC or LSP-500VARC-Pst), Integrating Sphere (IS-1.5MA and IS-0.3M), Standard Light Source (SLS-50W and SLS-10W), 19 Inch Cabinet (CASE-19IN). You can download the detail PDF here: LPCE-2 (LMS-9500C) Scientific Grade CCD Spectroradiometer Integrating Sphere System Brochure Specification: • CCD detector: Hamamatsu TE-cooled (Temp: -10°C ±0.05°C) high sensitivity back-thinned detector • Spectral wavelength accuracy: ±0.2nm, Resolution: ±0.1nm, Sample scanning steps: ±0.1nm • Accuracy of chromaticity coordinate (Δx, Δy): ±0.0015 (under Standard A Lamp) • Correlated color temperature CCT: 1, 500K~100, 000K, CCT accuracy: ±0.2% • Color rendering index range: 0~100.0, Accuracy: ±(0.3%rd±0.3) • Photometric linear Accuracy: ±0.2% • Stray light: <0.015%(600nm) and <0.03% (435nm) • Integration time: 0.1ms-60s • It can measure the temperatures inside and outside of integrating sphere • Flux testing method: spectrum, photometric and spectrum with photometric revision • The system includes the auxiliary lamp device and the software includes self- absorption function • It can measure the temperatures inside and outside of integrating sphere • Connect with PC via USB cable. The English version software can be run in Win7, Win8, Win10 and Win11 (The driver was Certificated by Microsoft) • The LM-79 Photometric, Colorimetric and Electricity report can be exported PDF and LED Optical Maintenance test report can be exported Excel or PDF

Minimum Order: 1 bags

LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for single LED and LED luminaires' photometric, colorimetric and electrical measurement. The measured data meets the requirements of CIE 177, CIE84, CIE-13.3, COMMISSION DELEGATED REGULATION (EU) 2019/2015, IES LM-79-19, Optical-Engineering-49-3-033602, IESNA LM-63-2, ANSI- C78.377 and GB standards The Sphere System Configuration: CCD Spectroradiometer (LMS-7000), Optical Fiber (CFO-1.5M), Digital Power Meter (LS2008R), DC Power Source (DC-S Series), AC Power Source (LSP-500VAS), Integrating Sphere (IS-1.5MA-CASE and IS-0.3M), Standard Light Source (SLS-50W and SLS-10W) Measurement: • Colorimetric: Chromaticity coordinates, CCT, Color Ratio, Peak Wavelength, Half Bandwidth, Dominant Wavelength, Color Purity, CRI (Ra, R1 to R15), Spectrum Test, TM30 (Rf, Rg), CQS • Photometric: Luminous Flux, Luminous Efficiency, Radiant Power, EEI, PAR, PPF • Electrical: Voltage, Current, Power, Power Factor, Harmonic (Optional) Specification: • Spectral Range Wavelength: 350nm~950nm(LMS-700VIS) (200~1050nm is optional) • Spectral Wavelength Accuracy: ±0.5nm Wavelength Reproducibility: ±0.5nm • Sample Scanning Steps: ±0.1nm • Accuracy of Chromaticity Coordinate (Δx, Δy): ±0.003 (under Standard A Lamp) • Correlated Color Temperature CCT: 1,500K~25,000K. CCT Accuracy: ±0.5% • Color Rendering Index Range: 0~100.0, Accuracy: ± (0.3%rd±0.3) • Photometric linear: ±0.5% • Stray light: <0.015% (600nm) and <0.03% (435nm) • The system includes the auxiliary lamp device and the software includes self- absorption function • Connect with PC via USB cable. The English version software can be run in Win7, Win8 and Win10, Win11 (The driver was Certificated by Microsoft)

Minimum Order: 1 bags

LSG-1890BCCD/LSG-1800ACCD goniospectroradiometer is high precision automatic goniophotometric instrument for luminous intensity distribution measurement with facility for rotating the light source. The LSG-1890BCCD/LSG-1800ACCD can do the spatial CCT test and the intensity distribution test. It is for industrial laboratory photometric data measurement of luminaires such as LED luminaires, LED Plant Lighting, HID luminaires, fluorescent lamps and so on. Standard: Full meet the EN13032-1 clause 6.1.1.3 goniophotometer type 1, COMMISSION DELEGATED REGULATION (EU) 2019/2015, CIE-70, CIE-121, IES LM-79, IES LM-75, IES LM-80 and ect. Measurement: Luminous Intensity Data, Luminous Intensity Distribution, Zonal Luminous Flux, Luminaries Efficiency, Luminance Distribution(Option), Coefficient Of Utilization, Luminance Limitation Curves Glare, Maximum Ratio of Distance to Height, Equal Illuminance Diagrams, Curves of Luminaires VS Lighting Area, Isocandela Diagrams, Efficient Luminescence Angle, EEI, UGR, CCT, CRI, Color Temperature Distribution, Spectrum, (x, y)/(u, v), PAR, PPF, PPFD 3D distribution test and etc. Specification: • LSG-1890BCCD/LSG-1800ACCD Goniospectroradiometer=LSG-1890B/LSG-1800A Goniophotometer System + LPCE-2 Integrating sphere Spectroradiometer System • The goniophotometer can do the B-β test with two pillars and the C-γ test with single pillar & multi-function jigs • Test Max Luminaires size and weight: LSG-1890BCCD is 2000mm/60kg and LSG- 1800ACCD is 1600mm/50kg • The tested luminaries rotates around an angle of (γ)±180°(or 0-360°) and the tested luminaries rotates around itself with an angle of (C)±180°(or 0- 360°) • Luminosity Testing Range: Illuminance 0.01lx~99,999lx; Light Intensity 1.0cd~10^7cd (detector) • Angle accuracy: LSG-1890BCCD is 0.1°, LSG-1800ACCD is 0.2° • Work with high accuracy and quick CCD Spectroradiometer to measure spatial color parameters • Accuracy of chromaticity coordinate: ±0.0015 or ±0.0005(under standard A lamp) • Spectral Range Wavelength: 350nm ~800nm; Accuracy of wavelength: ±0.5nm • The Hardware and Software can do the PAR, PPF and PPFD 3D distribution test, which can export IES/LDT files • Photometry Accuracy: CIE Class A (Class L is option) • Testing Accuracy: 2%(Under Standard lamp); Stray Light: less than 0.1% • English version software can run in Win7, Win8 or Win10, Win11 • LISUN goniophotometer software can export CIE, IES, LDT and other format files. These kinds of format files can be transferred by other illumination and luminaire design software such as DiaLux

Minimum Order: 1 bags

What is type C goniophotometer definition? LSG-6000 Moving Detector Goniophotometer (Mirror Type C) was manufactured by LISUN completely meets LM-79-19, IES LM-80-08, COMMISSION DELEGATED REGULATION (EU) 2019/2015, CIE-121, CIE S025, SASO 2902, IS16106 and EN13032-1 clause 6.1.1.3 type 4 requirements. LSG-6000 is the latest upgraded product of LSG- 5000 and LSG-3000 in compliance with the requirements of the LM-79-19 standard Clause 7.3.1, its an automatic light distribution intensity 3D curve testing system for measuring light. The measuring distance is from 5m to 30m. What is the use of goniophotometer? LSG-6000 gonio photometer manufacturer is LISUN, it can measure all types of lighting sources, LED, Plant Lighting or HID luminaires such as indoor and outdoor luminaires, roadway luminaires, street lamps, flood lights and other kinds of luminaires. Measurement: Luminous Intensity Data, Photometric Data, Luminous Intensity Distribution, Zonal Luminous Flux, Luminaries Efficiency, Luminance Distribution(Option), Coefficient Of Utilization, Luminance Limitation Curves Glare, Maximum Ratio of Distance to Height, Equal Illuminance Diagrams, Curves of Luminaires VS Lighting Area, Isocandela Diagrams, Efficient Luminescence Angle, EEI, UGR, etc. Features: • The near field detector moves together with the big mirror in a line. The big mirror and the far field detector move synchronously. • The burning position of the lumainares will be kept without moving at all, and the detector will always sense the light directly from the luminares. • The rotary motor is from Japan MITSUBISHI MOTORS and the angle decode system is from Germany. They help the goniophotometer rotating smoothly with high accuracy. It is very stable when start and stop. • The working principles are according to IESNA and CIE. The LSG-6000 completely meet the LM-80, LM-79, LM-75, GB, EN and CIE121-1996 standards. • Special collimation device with cross laser line help you installing the position of the luminaires under test conveniently and accurately. Specifications: • The luminaire under test rotates around the mirror with an angle of (γ) vertical axis ±180° (or 0-360°) and the luminaire rotates around itself with an angle of (C) horizontal axis ±180° (or 0-360° ). • The accuracy of angle: 0.05°, Resolution of angle: 0.001° • Accuracy of Goniophotometry detector: Constant temperature photo detector DIN5032-6/CIE pub1. No. 69 Class L • LISUN goniophotometer software can export CIE, IES, LDT and other format files. These kinds of format files can be used via other illumination and luminaire design software such as DiaLux. • Connect the goniophotometer to PC via USB cable. English version software can run on Win7, Win8 or Win10, Win11 • LSG-6000 can be used together with a CCD Spectroradiometer to test spatial CCT Distribution and other Spectral color parameters. We call this system "Goniospectroradiometer (LSG-6000CCD)". LSG-6000CCD Goniospectroradiometer = LSG-6000 Goniophotometer System + LPCE-2 Integrating sphere Spectroradiometer System. Please click to download the LSG-6000CCD Brochure • The LSG-6000CCD software and hardware support the plant lighting PAR, PPF and PPFD spatial distribution test , and it can export IES/LDT files How does Mirror Goniophotometer work? Goniophotometer adopts the measuring principle of fixed detector and rotating lamp method. The measuring lamp is installed on a two-dimensional rotating worktable, and the luminous center of the lamp coincides with the rotating center of the rotating worktable through the laser beam of the laser sight.

Minimum Order: 1 bags

Electric pumping, 3 modes, 9-level suction; teat & cap attached. Portable electric breast pumps for sale Three modes 9-level suction Touch screen Anti-reflux Food grade silicone Silent design Lithium battery Specifications of yoboo electric breast pump Sales name Electric unilateral breast pump Highlights · 3 Modes & 9 Levels · Anti-reflux · 24mm Silicone Shield with Food Grade · BASF PPSU Material · One-step breastfeeding · Silent Design with Night Light        material 1. Host: ABS, PMMA, PC 2. Tee: pp 3. Bottle body: ppsu 4. Bell mouth: silicone Internal volume 180ml Instructions 1. When the host is turned on, the night light is on, the battery indicator is on, and the current battery is displayed. 2. After power on, long press the " + " button to turn off or turn on the night light. 3. Press and hold the power button, the machine enters the massage mode, the last used gear is the default, the gear light and the mode light are always on, The massage frequency can be adjusted according to the actual situation. 4. Press the power button lightly, the machine switches to the breast pumping mode, the default gear position last used, the gear position light and the mode light are always on, The frequency of breastfeeding can be adjusted according to the actual situation. 5. Lightly press the power button again, the machine switches to the milk array mode, the default last used gear, the gear light and the mode light are always on, the milk array gear can be adjusted according to the actual situation. 6. Long press the power switch key, the night light goes out, the machine shuts down and stops running. Benefits of electric milk suction pump Directly connected to the milk bottle or milk storage bag, no waste of every drop of breast milk, one-stop breastfeeding (from sucking - storing - heating - feeding) the whole process almost the entire sterile, no need to worry about spilling and pouring, to ensure freshly sucked milk fresh to drink. There are 27 gears, including three main modes - massage mode, breast pumping mode and milk array mode, each with 9 gears to suit all mothers' breast pumping needs. Using Japanese Spiral Flow™ lactation technology, a cyclone massage from the upper breast wall stimulates and increases milk production, combining comfort and effectiveness to maintain lactation and increase milk production while feeling natural. An anti-backflow valve is provided to prevent backflow of breast milk during pumping. 24mm food grade silicone shield, BPA free, to suit most breast sizes. All other components are made of full PPSU from BASF Germany, which is BPA free and safe. The machine runs almost silently throughout and comes with its own light band. Manual Pump Vs Electric Pump, which is Better? New mothers are often confused when choosing a breast pump, as they can be divided into two categories: manual breast pumps and electric breast pumps. Manual pumps - Manual breast pumps work without electricity. They are hand operated and can only be used for one breast at a time. The pump is placed over the breast and the other hand is used to ‘pump’ the lever in order to create suction. These pumps are often less expensive than the electric ones and are usually quite light and compact, making them a good choice for those on a budget or with limited space. Electric breast pumps - Electric Breast Pumps are operated either through a power outlet or battery. They come in models that allow for single or double breast expressing. The cup is placed over the breast and the suction is created for you, freeing one hand for other tasks. A one-stop feeding mode that doesn't waste every drop of breast milk, with a wide range of suction options, this makes the electric breast pump very user-friendly and essential for new mothers and those who need to pump every day. Both pumps can be very effective in drawing out milk for storing and/or bottle feeding. Your lifestyle, pumping schedule and budget will usually determine which is the best fit for your needs. How To Use yoboo Electric Breast Pump The video shows the usage of portable electric breast pump, and there are five types of breast pump at yoboo. Friends who want to buy portable double breast pump or other related compact breast pumps, welcome to contact yoboo, a certified portable electric breast pump supplier. As a portable electric breast pump supplier, Yoboojp provides yoboo feeding bottle, yoboo feeding bottle, wireless electric breast pump, breast express machine electric, etc. For yoboo electric breast pump review or breast milk pumping machine price, please feel free to contact us!

Minimum Order: 1 bags

Unscented Baby Wipes Features Thickened non-woven fabric. Pearl texture. High water content. insensitive formula Specifications of Unscented Baby Wipes Product name tasteless baby wipes Highlights 1. Thickened spunlaced non-woven fabric with soft fabric and good water absorption. 2. Pearl texture technology is adopted on the surface, which effectively improves the cleaning effect. 3, 777‰ water content, sufficient water, enhance cleanliness. 4. The insensitive formula is free of formaldehyde, alcohol, essence and fluorescent agent; No irritation, care for skin. Components Spunlaced non-woven fabric, vitamin E, aloe extract, EDI pure water 30 samples, 100 samples Note 1. Please re stick the sticker when not in use to prevent the wet wipes from drying. 2. The wet towel is insoluble in water. Please do not throw it into the toilet. It is blocked on one side. 3. Do not put the product in the place with high temperature or direct sunlight. 4. If there is any abnormality or discomfort during use, please stop using. 5. Please keep it out of the reach of infants to avoid accidents. Unscented Baby Wipes Newborn babies' skin is about 30% thinner than ours, and they are more sensitive to chemicals in soap and skin products (even products for babies)- especially in the first month. It is recommended to bathe your baby with clean water in the first month. During this period, the baby's skin will form a natural protective barrier. So in the second month, you can start introducing mild products suitable for babies. The ingredients to be avoided are sulfate, parabens, phthalates, artificial colors and perfumes. Yoboojp provides yoboo milk bottle, yoboo feeding bottle, portable double electric breast pump, baby wipes unscented bulk, safest wipes for newborns, unscented baby wipes bulk, unscented wipes for babies, unscented wipe, baby wipes unscented, wipes for sensitive newborn skin, wipes suitable for newborns, yoboo nursing bottle, etc. For more information, please feel free to contact us!

Minimum Order: 1 bags

Separate storage box Features Close to block fresh Store meals seperately Stack storage Safe material Specifications of Separate Baby Food Storage Container Product name baby separate meal storage fresh-keeping box Highlights 1.Built-in silicone sealing ring, no leakage and lock fresh 2. Classified storage without mix flavor 3. Store meals separately without waste 4. Stacked to store, do not take much space 5. Ventilation vent, no need to remove the lid to heat 6. Clear scale line 7. Safe material of food grade Model YB-0055, YB-0056 Components fresh-keeping box Capacity 60ml, 120ml Instructions 1. It can be heated by microwave oven and refrigerated by refrigerator 2. Food grade PP safety material Why and when should baby add complementary food? After the baby is 6 months, the iron element content in the body is basically consumed. If the iron content in the supplementary food is also lacking, it is easy to cause iron deficiency anemia, resulting in chronic hypoxia, which is not conducive to the development of the nervous system. Since then, the amount of food eaten by breast-fed babies has increased, and the mother's milk has decreased a little bit. so pure breast-feeding has been unable to meet the baby's physical needs. 6-12 months is the key period when baby learn and exercise chewing and autonomous swallowing, so 6-7 months is the best stage to add right complementary food. Leave a Message yoboo ensures the safety and health of every baby and mother. The raw materials of the products are selected from BASF PPSU in Germany, and have SGS, FDA, ROHS, CE, ISO and other testing certifications. Yoboojp provides yoboo milk bottle, yoboo feeding bottle, portable double electric breast pump, infant food storage, yoboo baby food, etc. For more information, please feel free to contact us!

Minimum Order: 1 bags

Multi functional high chair; Height is adjustable, switched at any time; Detachable double-layer dining plate. Use the upper layer when eating. Use the lower floor when having fun. Multifunctional baby high chair Features Double-layer dining plate Bottom storage bag Safe and Stable PP-made Plate PU seat cushion Telescopic plate Height is adjustable anti-falling Specificatio , ns of Multifunction high chair Product name Multi functional baby dining chair Highlights 1. Telescopic plate design 2. Bottom storage bag 3. PP material 4. Soft PU seat cushion Soft, comfortable, waterproof, stain-resistant and easy to clean. 5. Height is adjustable, switched at any time. 6. protective belt ensures baby's safety. Model YB-0015 Components Dining plate, dining plate, upper steel pipe, lower steel pipe, dining chair body, pedal, chair foot, cushion, net pocket, safety belt Material TPR+PP+iron Instruction 1. First install the four steel pipes in the upper section into the upper end of the pedal, and then install the steel pipes in the lower section into the lower end of the pedal. Note: The spring piece shall be ejected from the round hole of the plastic part before it is installed in place. 2. Then install the four feet into the bottom of the steel pipe. Note: Rotate the foot to an appropriate angle to make parallel contact with the ground. 3. Install the assembled upper and lower steel pipes into the main body of the dining chair. 4. Install the safety belt into the corresponding hole. 5. Finally, install the dining board along the track of the dining chair. Multifunctional Baby High Chair When choosing a multifunctional baby high chair, it’s important to check the features. The important ones are safety; the straps need to securely support your baby and the functionality of how the highchair collapses is important. Easy clean options are also worth noting as weaning and baby feeding is a very messy time! Leave a Message yoboo ensures the safety and health of every baby and mother. The raw materials of the products are selected from BASF PPSU in Germany, and have SGS, FDA, ROHS, CE, ISO and other testing certifications. Yoboojp provides yoboo milk bottle, yoboo feeding bottle, portable electric breast pump, feeding bottle teats, yoboo high chair, yoboo baby high chair, high chair multifunction, adjustable high chair, yoboo milk bottle, etc. For more information, please feel free to contact us!

Minimum Order: 1 bags

Double deck plates Bottom storage basket Foldable legs PP plate Retractable plates Adjustable height Specifications of multifunction baby high chair-Flex (Nature) Product name Multi functional baby dining chair folding type Highlights 1. 30mm pipe diameter, more stable and durable, the surface of the paint is fully covered to prevent rust. 2. Retractable plate design, buckle for  three types of adjustment, suitable for the babies at different growth stages. 3. Adjustable chair legs, more space saving 4. Protective belt of five-hole fixed buckle type , ensure the safety of the baby. Model YB-0073-1 Components Dining plate, dining plate, upper steel pipe, lower steel pipe, dining chair main body, pedal, foot, cushion, net pocket, safety belt Material PP+iron+PU+TPR Instruction 1. First install the four steel pipes in the upper section into the upper end of the pedal, and then install the steel pipes in the lower section into the lower end of the pedal. Note: The spring piece shall be ejected from the round hole of the plastic part before it is installed in place. 2. Then install the four feet into the bottom of the steel pipe. Note: Rotate the foot to an appropriate angle to make parallel contact with the ground. 3. Install the assembled upper and lower steel pipes into the main body of the dining chair. 4. Install the safety belt into the corresponding hole. 5. Finally, install the dining board along the track of the dining chair. Multifunctional infant outdoor chair-Flex (Nature) When choosing a high chair, it is important to check its characteristics. What matters is safety; The straps need to support the baby firmly, and how to fold the high chair is important. If easy to clean is also worth noting. Leave a Message yoboo ensures the safety and health of every baby and mother. The raw materials of the products are selected from BASF PPSU in Germany, and have SGS, FDA, ROHS, CE, ISO and other testing certifications. Yoboojp provides yoboo milk bottle, yoboo feeding bottle, feeding bottle teats, folding infant high chair, folding infant chair, yoboo feeding bottle, etc. For more information, please feel free to contact us!

Minimum Order: 1 bags