Offers to Sell

Solar street lights use solar energy as the energy source. Capable of realizing conversion from photovoltaic to electricity through solar panels, the solar powered lights produced by Anern use their batteries to store electricity during the daytime, and power the light through the controller at night to achieve the required functional lighting. As a mature solar light manufacturer, Anern is a comprehensive enterprise with 12 years of experience in R&D, production, and sales of China solar light. Anern owns dozens of product-related patents, and our different types of solar lights are sold to more than 100 countries around the world, participating in the completion of thousands of government solar lighting projects. How Do Solar Lights Work Solar lighting uses solar panels to absorb solar radiation during the daytime and converts it to electrical energy. It is stored in the battery bank through a charge and discharge controller. At night, when the daylight gradually decreases to about 10lux and the solar panel open circuit voltage is about 4.5V, the controller shall detect this voltage value and then direct the battery to discharge and power the LED light source to realize functional lighting. Solar Light Components There are two main types of batteries for solar-powered lights, lead-acid batteries, and lithium batteries. The advantages of lead-acid batteries are that they have been used in solar lighting for the longest time, and are more stable and cost-effective. The disadvantage is that the lead-acid battery is large in size and can generate serious environmental pollution during production, and its price fluctuation is big due to the effect of the lead cost. The advantage of lithium batteries is that under the same capacity, their volume and weight are smaller than lead-acid batteries, the energy density is bigger, and its use is more flexible. The disadvantage is that its price is higher compared with a lead-acid battery. However, with the technical development and increasing high acceptance in the market, the lithium battery cost has gradually decreased and becomes the main battery type used in solar lighting. Solar Lights Replacement Anern solar-powered light has engineering quality. We promise that the raw materials we used do not contain any defective or second-hand product. When solar-powered lights failure occurs, please check the following places: Please check whether the solar panel wire is connected to the lamp cap wire and tighten it. When connected to the solar panel line, the battery indicator (red light) of the controller will always be on, if not on, the battery may be out of power. Place the lamp cap and the solar panel in the sun at the same time and then observe the state of the controller indicator, to see whether the red light is always on and the blue light flashes slowly; If the indicator lights are not on, please consult the engineer of Anern for further guidance. Regularly check the remote. Press the remote control to see is there any flashing at the controller. If there appears no flashing, adjust the remote distance and then press the remote again to send the signal. If this does not work, the remote of the solar-powered lights may be broken or you need to charge the remote. Guangzhou Anern Energy Technology Co., Ltd.(Referred to as “Anern”) is a professional solar light supplier, we provide anern solar panel, anern inverter, anern led bulb and etc. Want to know more? Please contact us.

Minimum Order: 100

LED flood light can be seen as the point light that can illuminate all quarters uniformly. Its range of irradiation can be adjusted at random and appears as a regular octahedron icon in the scene. Normally, a LED floodlight can be used to illuminate the entire scene. Multiple floodlights can be used in combination to achieve a better effect. Meanwhile, based on the regular led floodlight, it is available to increase LED lenses to achieve light-gathering and specific ambient lighting. As a professional LED flood lights manufacturer, Anern provides LED floodlights with a wide range of lighting and spotlighting. Aiming to become the best LED flood lights factory and supplier in China, Anern strives to meet the requirements of different scenes as much as possible. Feel free to contact us for more info about our LED floodlight wholesale. Advantages of Anern LED Flood Light For Sale Anern's LED flood lights wholesale can improve market competitiveness. High-quality led chip and power supply solutions ensure product stability and create a high-quality product image. As a professional led floodlight supplier, Anern has a professional sales group who can provide free and professional lighting simulation analysis to help you get orders successfully. One-stop purchasing experience, providing everything you want and satisfactory after-sales service. What is the Different between Floodlight and Spotlight? Capable of uniformly illuminating in all directions, LED floodlight has a wide irradiation range which can be adjusted arbitrarily. Normally, the LED flood lights will produce highly diffuse and directionless light, thereby resulting in soft and transparent shadows. When using LED flood lights to illuminate objects, the illumination will fade much more slowly than when used with spotlights. Spotlights, on the other hand, project directed and well-defined beams of light to illuminate a specific area. As a professional high-power LED flood light factory, Anern suggests you combine the use of LED floodlights and spotlights so as to achieve better lighting effects. What Are The Best Led Flood Lights? Energy-saving: Compared with incandescent lamps, good LED floodlights can save energy up to about 75%. The light flux of an 85W LED floodlight and 500W incandescent lamp is roughly the same. Environmental protection: LED floodlight uses solid mercury agent. Even when it is broken, the LED floodlight will not cause pollution to the environment. It is a real environmental protection green light source. No stroboscopic: Because of its high working frequency, a good LED floodlight is regarded as having "no stroboscopic effect", which will not cause eye fatigue and protect eye health. Optional color temperature: The color temperature of LED flood lights for sale at Anern ranges from 2700K to 6500K, which can greatly meet the needs of different customers and application fields. High proportion of visible light: In the emitted light, the proportion of visible light reaches more than 80%. Hence, the visual effect of a high- quality LED floodlight is good. Small light decay rate: A good LED floodlight should not need preheating and it can immediately start and restart. Anern's LED floodlights adopt high-quality self-developed linear power supply solutions and acrylic lens with high light transmittance, which provide higher power supply efficiency and product stability. Our LED floodlight for sale is well-known for its better lighting effects and good heat dissipation effect of the die-cast aluminum casing. Compared with the LED floodlights on the market, Aneng LED floodlights to cover two types of large range lighting and concentrated lighting, which can meet the lighting needs of different scenes. Our LED floodlight is widely used in stadiums, stadiums, stage lighting, tunnel lighting, billboard lighting, exterior wall lighting, and other fields. Led Flood Light Review As a professional LED floodlight supplier and factory, Anern has got lots of positive reviews over our LED flood lights for sale. One of my partners recommended Anern to me. The adjustable modular floodlight exceeded our expectations, when I got it, I was amazed by how sturdy and well-made it was.102 sets of 100W floodlights are used in this stadium lighting project, very strong and powerful with great distance. ADHIALESJA PERU Great supplier of LED flood light! Upon installing I was impressed with the build and sturdiness of them and all lights working well so far. OLADELLEAN SOUTH AFRICA We and Anern have cooperated for 2 years. Abundant LED product series and competitive prices have made Anern a stable supplier of my offline store. Every time the customized product we got are satisfied. Anern have 12 years of production experience in led lighting, we believe it's product quality and after-sale service. EDUARDO KUPERSTEIN VENEZUELA One of my partners recommended Anern to me. The adjustable modular floodlight exceeded our expectations, when I got it, I was amazed by how sturdy and well-made it was.102 sets of 100W floodlights are used in this stadium lighting project, very strong and powerful with great distance. Guangzhou Anern Energy Technology Co., Ltd.(Referred to as “Anern”) is a professional anern solar company, we provide anern solar panel, anern solar street light, anern led bulb and etc. Want to know more? Please contact us.

Minimum Order: 100

The appearance of the LED light bulb adopts the bulb shape that people have been accustomed to-spherical, and the internal light source is an LED chip. The LED bulb bulk has all the advantages of LED lamps: environmental protection, energy-saving, long service life, and no flicker. The largest market for LED bulb lighting is the civilian market, and the bulbs used by citizens are also the largest. The LED bulb sold by Anern solar company adopts the existing interface methods, namely screw port (E26\E27\E14, etc.), socket mode (B22, etc.), and even imitates the shape of incandescent bulbs in order to meet people's habits. As a professional led bulbs wholesale suppliers, Anern offers LED bulbs wholesale at competitive prices. Feel free to contact us now. Advantages of Anern LED Bulb Light Adopting branded LED lamp chips, with high luminous efficiency, the light emitted by Anern LED Bulb Light is soft and not dazzling. The self-developed high-efficiency and low-energy drive power supply truly realize energy conservation and environmental protection. Through a complete raw material supply chain, Anern industry group limited can provide ultra-high cost-effective LED bulb bulk to ensure an advantage in the market. As one of the professionals LED bulb wholesale suppliers in China, Anern also provides long-term OEM services for our LED bulb lights and we also have the best service support for long-term strategic partners. Are LED Light Bulbs Bad For Your Eyes？ The answer to this question is actually quite ambiguous. In fact, all the artificial lights, including the led light bulbs, will have a certain impact on our vision. And comparing to the traditional lights on the market, the LED bulb lights have already used better measures to reduce their damage to people's eyes. Under normal circumstances, as long as you don't stare at the LED light bulb for a long time, the damage of it will be too minimal to be counted. When choosing the LED bulb bulk for your business and customers, you can purchase the LED bulb lights with small power as indoor lighting so as to lower the stimulation of bulbs to human eyes. Why Are Led Light Bulbs Better? Comparing to the traditional incandescent lamps, the led light bulbs for sale on the market normally have lighter and more compact structures. Due to its smaller sizes, the led bulb lights can save a lot of materials and space in the production and storage process. Moreover, the energy consumption of the current wholesale led light bulbs is also very low. Using LED light bulbs can contribute greatly to our environmental protection. Lastly, compared to ordinary light bulbs and fluorescent lamps, LED bulb lights are also impregnable, infinitely stronger, and infinitely more durable. LED Bulb Design Replacing the traditional incandescent bulbs, the latest LED bulb designed by Anern can save 90 percent of the electricity bill. It has high brightness and long service life. As one of the professional LED bulbs wholesale suppliers in China, Anern Group provides custom design services for LED bulb bulk cases. Professional designers from Anern will definitely embellish your brand. In line with CE certification requirements, our LED light bulb cases are available in a variety of sizes, patterns, and designs. Feel free to contact us for our high-quality customized LED bulb lights. Guangzhou Anern Energy Technology Co., Ltd.(Referred to as “Anern”) is a professional anern solar company, we provide anern solar panel, anern lighting, anern led bulb and etc. Want to know more? Please contact us.

Minimum Order: 100

The hybrid solar inverter is an important part of the off-grid solar power supply system. Its main function is to convert the direct current generated by the solar panel to alternating current and supply to the loads. Anern Hybrid Solar Inverter is a mppt inverter hybrid solar, which is a sine wave high-frequency inverter with a built-in high-efficiency MPPT controller. This series of hybrid inverter solar system is far higher than similar products on the market in terms of solar panel charging current and maximum input voltage. At the same time, with the patented function developed by our company, solar panel power can also directly supply power to the load (not connected to the grid) without going through the battery, which can reduce the demand for batteries and reduce the cost of the entire system. As a professional solar battery charging system supplier, Anern provides high-end hybrid inverters for the solar systems at a competitive marketing price. Feel free to contact us for more information. Advantages of Hybrid Solar Inverter The traditional controller and inverter are integrated together, making our hybrid inverter for solar system have easier installation and more convenient use. Built-in MPPT controller, sine wave high-frequency inverter, all parameters of this on-grid hybrid solar inverter series are consistent with the top industry standards. Exclusive patented design function, Anern's hybrid solar inverter can be started directly without a battery, and the solar panel can directly supply power to the load. Become a long-term strategic partner of Anern and get better prices and various sales support. Can Hybrid Inverter Work Without Battery? Theoretically speaking, a hybrid inverter for the solar system can effectively work without a battery. Attached to solar panels and the power grid, the hybrid solar inverter can work well even the electricity is cut down. The hybrid solar inverter incorporates a high-volt input MPPT controller that can convert the photovoltaic's solar energy directly into the load. Difference Between Hybrid Inverter And Normal Inverter While the normal solar inverters just simply convert DC electricity input into AC electricity output, the hybrid inverter for the solar system can convert DC power and AC power in both directions. In other words, the hybrid solar inverter can work both as a charger and an inverter. During the uses, the hybrid inverter solar system can simultaneously manage the electricity input from both solar panels and battery banks. And the batteries connected with the hybrid solar inverter can be charged with either electricity collected from solar panels or the electricity grid. Being able to get installed without batteries, the hybrid solar inverter, in contrast with the normal solar inverter, can easily realize further expansion, which makes itself perfect for off-grid and stand-alone power systems. Guangzhou Anern Energy Technology Co., Ltd.(Referred to as “Anern”) is a professional anern solar company, we provide on grid hybrid solar inverter, hybrid inverter with solar battery charging, solar hybrid inverter without battery, anern solar light, anern led bulb and etc. Want to know more? Please contact us.

Minimum Order: 100

The AN-SLM2 series LED street lights are Anern's hot LED street light for sale for years and these COB LED street light are widely considered as the most cost-effective products. The housing of the COB LED street light is integral die-casting. The lamp bead adopts the method of SMD and integrated lens, which has a stronger light concentration. Using imported LED chips and a high-quality LED power supply, the lighting effect and stability of this SMD LED lamp/light series are guaranteed. The Specification of COB LED Street Light(SLM2) Model LED chip Flux CRI Working Voltage AN-SLM2-30W LED Street Light Epistar 3000-3300lm >80 AC85-265V AN-SLM2-50W LED Street Light Epistar 5000-5500lm >80 AC85-265V AN-SLM2-100W LED Street Light Epistar 10000-11000lm >80 AC85-265V AN-SLM2-150W LED Street Light Epistar 15000-16500lm >80 AC85-265V AN-SLM2-200W LED Street Light Epistar 20000-21000lm >80 AC85-265V The Production of COB LED street light(SLM2) 750 sets of AN-SLM2 series COB LED street lights have completed packing and will be shipped to Malaysia. Our factory always strictly follows the production management manual to ensure the LED light quality and efficiency. Guangzhou Anern Energy Technology Co., Ltd.(Referred to as “Anern”) is a professional anern solar company, we provide anern solar panel, anern solar light, anern led bulb and etc. Want to know more? Please contact us.

Minimum Order: 100

AN-SFL02 series of commercial solar flood lights is a product developed by Anern after improving the existing solar floodlights in the market in accordance with customer needs. This series of China solar flood light are easy to install and connect, and can be installed on walls and light poles. The installation position of the solar panels can be adjusted according to actual needs, and the solar energy can be fully utilized for power generation. The Specification of Solar Flood Light (SFL02) Model Solar Panel LiFePO4 Battery Lumen Lighting Method AN-SFL02-50W Solar Flood Light 5V6W 3.2V5000mah 150lm/w Time Control Light Control Motion Sensor AN-SFL02-100W Solar Flood Light 5V15W 3.2V15000mah 150lm/w AN-SFL02-200W Solar Flood Light 5V20W 3.2V20000mah 150lm/w AN-SFL02-300W Solar Flood Light 5V30W 3.2V30000mah 150lm/w AN-SFL02-400W Solar Flood Light 5V40W 3.2V40000mah 150lm/w AN-SFL02-500W Solar Flood Light 5V50W 3.2V50000mah 150lm/w The Production of High Powered Solar Flood Lights (SFL02) The production of another batch of solar flood light has been completed. As a professional solar flood light supplier, Anern controls the product accessories quality and delivery time from the source, without any intermediate links, and reduce the production costs. Guangzhou Anern Energy Technology Co., Ltd.(Referred to as “Anern”) is a professional anern solar company, we provide anern solar panel, anern solar light, anern led bulb and etc. Want to know more? Please contact us.

Minimum Order: 100

Gasoline Ceramic Metal Euro 4/5/6 Auto Exhaust System TWC Three-Way Catalyst TWC Three Way Catalyst Three-way catalysts (TWC) are designed to simultaneously convert three pollutants to harmless emissions: Carbon Monoxide (CO) → Carbon Dioxide (CO2) Hydrocarbons (HC) → Water (H2O) Oxides of Nitrogen (NOx) → Nitrogen (N2) A three-way catalyst can cut CO, HC and NOx by over 99% if the air to fuel ratio is accurately controlled. Three-way catalysts will only give full conversion of each of these three pollutants in a gas stream containing a stoichiometric ratio of CO and NOx. Product introduction: TWCs can efficiently convert harmful hydrocarbons (HC), carbon monoxide (CO) and nitrogen oxides (NOx) in the exhaust gas of gasoline vehicles into harmless water (H2O), carbon dioxide (CO2) and nitrogen (N2) through oxidation-reduction reactions. Specification Diameter (mm) Length (mm) Cell Density (CPSI) Emission Standard Ø80*60 80 60 200/300/400/600/750 Euro 4/5/6 Ø93*60 93 60 200/300/400/600/750 Euro 4/5/6 Ø93*75 93 75 200/300/400/600/750 Euro 4/5/6 Ø93*88.3 93 88.3 200/300/400/600/750 Euro 4/5/6 Ø93×101.6 93 101.6 200/300/400/600/750 Euro 4/5/6 Ø101.6*60 101.6 60 200/300/400/600/750 Euro 4/5/6 Ø101.6*76.2 101.6 76.2 200/300/400/600/750 Euro 4/5/6 Ø101.6*90 101.6 90 200/300/400/600/750 Euro 4/5/6 Ø101.6*100 101.6 100 200/300/400/600/750 Euro 4/5/6 Ø101.6*118 101.6 118 200/300/400/600/750 Euro 4/5/6 Ø101.6*123.3 101.6 123.3 200/300/400/600/750 Euro 4/5/6 Ø101.6*136 101.6 136 200/300/400/600/750 Euro 4/5/6 Ø101.6*152.4 101.6 152.4 200/300/400/600/750 Euro 4/5/6 Remark: Other sizes can be customized according to customer requirements. Product advantages: With nearly 20 years of technology accumulation, we can provide customers with rich customized solutions. TWCs can meet Euro-VI and China-VI regulations, especially for RDE. TWC has been mass produced and successfully applied on more than 100 different domestic and foreign automotive projects meeting China-VI emission standard. As China’s leading supplier of catalysts, WEIFU has rich experience in the development of emission control technologies for a wide range of market applications that protect the air we breathe. Protecting the air from harmful emissions is the focus of innovative solutions within WEIFU. New engine technologies, tightening emission regulations and fluctuating precious metals prices create emissions control challenges. We help make our customers more successful with innovative, cost-effective solutions to meet the toughest emissions control regulations. Our mission is to reduce emission for a better living environment. Items Contents Product Name Three way catalyst Material Ceramic, metal Shape Round, oval, racetrack-shaped Size Can be customized Cell Density 200/300/400/600/750/900 CPSI Application Auto exhaust system Car Model Universal Emission Standard Euro 4/5/6

We are a professional manufacturer of heat shrink tubing and have been doing business in this field for more than 10 years, with a good reputation and many regular customers all over the world. We can also accept any kind of customized heat shrink tubing type, as well as customized outer or inner packaging. Marking heat shrinkable tubes are designed to meet the high reliability cable marking requirements of the high-end market, it is made of environmentally friendly polyolefin heat-shrinkable material cross-linked by high-energy electron beam bombardment. Their main functions are electrical insulation of connectors, anti rust and anti-corrosion of solder joints, mechanical protection and wiring harness,ensure the reliability of equipment manufacturing, maintenance and operation management, and system safety. They are widely used in electronics, communication, automobile, ship, aircraft manufacturing and other fields. We make things like AMS - military standard grade heat shrinkable marking tube is made of radiation crosslinked polyolefin material. The main function of AMS military standard grade heat shrinkable marking tube is the cable interface marking of signal and power system. AMS military standard grade heat shrinkable marking tube is mainly used in communication, automobile, ship, spaceship, aircraft, nuclear power Island and other fields. Product Features: -Implementation standard: Class 1 and Class 3 of Military AMS-DTL-23053/5, compatible with UL 224 -Color code fastness standard: SAE AS 81531 and MIL-STD-202F/215J -Heat shrinkage ratio: 2;1 and 3:1 -Starting shrinkage temperature: 585℃ -Final shrinkage temperature: 5115℃ -Use temperature: -55℃~+135℃ -Environmental standards: RoHS -Standard colors: 10 standard colors are available for customization We guarantee reasonable prices and satisfactory quality, making it a good fit for your own brand. We can offer: - Competitive prices - High quality products - Sample orders accepted - Secure payment and delivery worldwide - Free shipping for bulk orders For custom production and any questions, please feel free to contact! Looking forward to be your supplier in China and have a long term cooperation. Contact us:Mors Email: sales@huawoer.cn

Minimum Order: 200

Model:CLX-02E Place of Origin:ShenZhen,China Product description 1. Small size, use polishing machine on site 2. Compact and lightweight design 3. Very suitable for on-site use 4. Ability to polish PC and APC fiber connectors Specification Machine size 120mm*130mm*180mm Net weight 2.8kg Voltage DC 12V Electric Power 15w Polishing quantity 1-6 ports Work Temperature 8℃~45℃ Materials stainless steel Timer 1 timer(max 30Sec) Motor Speed 100RPM rotation,revolution 3.3rpm Grinding Sheet Size 68 mm Features 1. High performance for various applications 2. Work body, simple design, easy to use 3. Small size, high portability can be achieved in the laboratory or on-site 4. Perfect research or low volume transformation 5. Short cycle time-usually 2 minutes. For reengineering 6. Compatible with all major optical fiber connector styles Application 1. Applied in small batch production of optical fiber equipment polishing 2. Suitable for rework and research applications Handheld Mini 12V Fiber Optic Polishing Machine For Fiber Optic Connector 0 FAQ 1. Are you a factory or a trader? ......we are factory. 2. What is your MOQ? ......MOQ 1 piece. 3. Do you provide sample services? ......Yes, we will provide samples(Samples at prices announced by chuanglixun). 4. How will you ship to me? ....... We will spend 4 to 6 days via DHL or FedEx. Properly extended based on order quantity 5. How do we pay ......Book in advance or multiple payment methods such as T / T and T / L. 6. How long is your product warranty? ......The warranty period is 1 year (the warranty period will provide free repairs, except for consumables). After the warranty period, accessories will continue to be provided and will be charged at cost. 7. Do you provide customized services? ......Yes, we provide customized services, According to customer requirements and description

Heat-shrinkable identification marker sleeves are designed to meet the requirements of high- performance identification of wire and cable, tools, hoses and equipment. Made from reliable flame-retardant polyolefin with outstanding properties, sleeves can also be used as electrical insulation. Marks are permanent after printing. Features ·Flexible, highly flame-retardant. ·Sleeves meet the print performance requirements of SAE-AS81531. ·Markers can also provide insulation and strain relief. ·Marks are permanent after printing; mark performance improves after shrinking. ·Free of PCBs, PCPs, polybrominated biphenyls (PBBs), polybrominated biphenyl oxides and ethers (PBBOs, PBBEs and PBDEs) and toxic heavy metal compounds, which are classified as environmentally hazardous substances. Conform to European RoHS environmental directive.

Minimum Order: 1 bags

Heat-shrinkable identification marker sleeves are designed to meet the requirements of high- performance identification of wire and cable, tools, hoses and equipment. Made from reliable flame-retardant polyolefin with outstanding properties, sleeves can also be used as electrical insulation. Marks are permanent after printing. Features ·Flexible, highly flame-retardant. ·Sleeves meet the print performance requirements of SAE-AS81531. ·Markers can also provide insulation and strain relief. ·Marks are permanent after printing; mark performance improves after shrinking. ·Free of PCBs, PCPs, polybrominated biphenyls (PBBs), polybrominated biphenyl oxides and ethers (PBBOs, PBBEs and PBDEs) and toxic heavy metal compounds, which are classified as environmentally hazardous substances. Conform to European RoHS environmental directive.

Minimum Order: 1 bags

Heat-shrinkable identification marker sleeves are designed to meet the requirements of high- performance identification of wire and cable, tools, hoses and equipment. Made from reliable flame-retardant polyolefin with outstanding properties, sleeves can also be used as electrical insulation. Marks are permanent after printing. Features ·Flexible, highly flame-retardant. ·Sleeves meet the print performance requirements of SAE-AS81531. ·Markers can also provide insulation and strain relief. ·Marks are permanent after printing; mark performance improves after shrinking. ·Free of PCBs, PCPs, polybrominated biphenyls (PBBs), polybrominated biphenyl oxides and ethers (PBBOs, PBBEs and PBDEs) and toxic heavy metal compounds, which are classified as environmentally hazardous substances. Conform to European RoHS environmental directive.

Minimum Order: 1 bags

Heat-shrinkable identification marker sleeves are designed to meet the requirements of high- performance identification of wire and cable, tools, hoses and equipment. Made from reliable flame-retardant polyolefin with outstanding properties, sleeves can also be used as electrical insulation. Marks are permanent after printing. Features ·Flexible, highly flame-retardant. ·Sleeves meet the print performance requirements of SAE-AS81531. ·Markers can also provide insulation and strain relief. ·Marks are permanent after printing; mark performance improves after shrinking. ·Free of PCBs, PCPs, polybrominated biphenyls (PBBs), polybrominated biphenyl oxides and ethers (PBBOs, PBBEs and PBDEs) and toxic heavy metal compounds, which are classified as environmentally hazardous substances. Conform to European RoHS environmental directive.

Minimum Order: 1 bags

Outdoor Swimming Colorful Neoprene Soccer Ball Neoprene Ball Description Name Outdoor Swimming Colorful Neoprene Soccer Ball Item No. P21OT02820 Size Main size #5, #2 Material Outer: Polyester + 2MM neoprene Inner: inflatable rubber bladder Color Neo-Splash logo & design MOQ 3000 pcs Logo Customized color & logo acceptable Features 1. Neoprene beach Soccer 2. 2mm neoprene + rubber bladder 3. Durable real neoprene as main material and strong stitching to ensure the safety while playing 4. Good for playing on the beach or water