Offers to Sell

LC or SC loopback or other customized, SM and MM fiber type for option, optical information routine exchange or test and equipment required, LC loopback is RJ-45 style interface. All loopback is compliant to Telcordia, IEC and EIA/TIA standard. Features of LC/SC Loopback Duplex connector or multi-fiber connector MPO or MTP connector(for multi-fiber connector) Standard loss or low loss(for multi-fiber connector) PC or APC polish Cable form or housing form Available in G.652, G.657, OM1, OM2, OM3, OM4 fiber Option for LSZH, OFNR or OFNP cable jacket Option for A, B or C polarity or Customized(for multi-fiber connector) Customized length available(multi-fiber connector≥15cm; duplex connector≥7.5cm) 100% factory terminated and tested Applications of LC/SC Loopback System loop test Optical loop test Aging and testing of the system Standards Compliance of LC/SC Loopback TIA/EIA-568.3-D ISO/IEC 11801 IEC-61754-7 IEC61754-20 IEC61754-4 EIA/TIA-604-5 GR-1435-CO , RE GR-326-CORE NFPA 262 or IEC 60332 Compliant to Directive 2002/95/EC (RoHS) REACH SvHC EN 50575 Specifications of LC/SC Loopback General Specification Construction Description Fiber Count 2fibers for duplex type; 2-24fibers for multi-fiber connector Fiber Mode Single mode: OS2/G657 9/125um Multimode: OM1 62.5/125 um OM2 OM3OM4 50/125um; Fiber Brand Corning SMF-28® Ultra optical fiber Corning ClearCurve® multimode fiber Cable Jacket Ratings Low Smoke Zero Halogen (LSZH) Riser (OFNR) Plenum (OFNP) Cable Jacket Color OS2/G657: Yellow OM1&OM2: Orange OM3: Aqua; OM4: Aqua/Magenta or Customized Polarity Type A, Type B, Type C (TIA-568.3-D) or Customized Connector Type SC LC MPO MTP Connector Color (SC LC) SM(APC) SM(PC) OM3 OM4 or customized Green Blue Aqua Magenta/Aqua Connector Color (MPO MTP) SM(APC) SM(PC) OM3 OM4 or customized Low Loss Yellow Yellow Aqua Magenta/Aqua Standard Green Blue Aqua Magenta/Aqua Loopback housing color black Operating Temperature -20°C to + 70°C Storage Temperature -40°C to + 85°C Technical Specification Optical Properties Singlemode Multimode Insertion Loss (dB) APC ≤ 0.30 (Typical:≤ 0.15 ) UPC ≤ 0.20 (Typical:≤ 0.1 ) APC ≤ 0.30 (Typical:≤ 0.10 ) PC ≤ 0.20 (Typical:≤ 0.1 ) Insertion Loss (dB) Low loss≤ 0.35 (Typical:≤ 0.25 ) Low loss≤ 0.35 (Typical:≤ 0.2 ) Standard Loss≤0.75 (Typical:≤ 0.4 ) Standard Loss≤ 0.6 (Typical:≤ 0.35 ) Return Loss (dB) PC≥50; APC≥60 PC≥20; APC≥40 Wavelength (nm) Singlemode: 1310/1550, Multimode: 850/1300 Fiber Attenuation (dB/km) Singlemode: ≤0.35 at 1310nm, ≤0.2 at 1550nm Multimode: ≤2.3 at 850nm, ≤0.6 at 1300nm Transmission Distance OM4: 150m at 40/100G, 550m at 10G OM3: 100m at 40/100G, 300m at 10G Housing and Pull-tab of LC/SC Loopback The loopback is both ends of fiber in a duplex connector or a multi-fiber connector, then the optical signal in the same connector, don't change signals or repeated back to its itself. It can provide an effective solution, test the emission ability of the network equipment and receive sensitivity, especially in 40/100G network communication through back signal positioning can be all kinds of potential phenomenon, so as to achieve optical fiber network in pairs on a single element or interface and effective test and evaluation of the Internet. T&S Communications is a professional fiber optic products supplier. We provide WDMs, Fiber Optic Component and so on. Want to know about ts communication? Please contact us.

JHD PLCCENTER IMPORT & EXPORT CO., LIMITED Add : Room252 NO38 Tianhuroad,SiMingDistrict,XiaMen City,China QQ :2392596973 Post Code : 361001 Email : kim_jhd1688@163.com sarahjld1688@163.com  W , hats:15759861556 Web : www.jld-electronics.com    2711P-T12C4D1     2711P-T12C4D2     2711P-T12C4D2K     2711P-T12C6A1     2711P-T12C6A2     2711P-T12C6B1     2711P-T12C6B2     2711P-T12C6D1     2711P-T12C6D2     2711P-B15C15A1     2711P-B15C15A2     2711P-B15C15B1     2711P-B15C15B2     2711P-B15C15D1     2711P-B15C15D2     2711P-B15C4A1     2711P-B15C4A2     2711P-B15C4B1     2711P-B15C4B2     2711P-B15C4D1     2711P-B15C4D2     2711P-B15C6A1     2711P-B15C6A2     2711P-B15C6B1     2711P-B15C6B2     2711P-B15C6D1     2711P-B15C6D2     2711P-K15C15A1     2711P-K15C15A2     2711P-K15C15B1     2711P-K15C15B2     2711P-K15C15D1     2711P-K15C15D2     2711P-K15C4A1     2711P-K15C4A2     2711P-K15C4B1     2711P-K15C4B2     2711P-K15C4D1     2711P-K15C4D2     2711P-K15C6A1     2711P-K15C6A2     2711P-K15C6B1     2711P-K15C6B2     2711P-K15C6D1 JHD PLCCENTER IMPORT & EXPORT CO., LIMITED Add : Room252 NO38 Tianhuroad,SiMingDistrict,XiaMen City,China QQ :2392596973 Post Code : 361001 Email : kim_jhd1688@163.com sarahjld1688@163.com  W , hats:15759861556 Web : www.jld-electronics.com

Minimum Order: 1 bags

Pigeon Medical PN-1000A infant bed has a lower center of gravity, more mass, a broader base of support and can hold a larger baby than a bassinet. Especially for infants and very young children. It is a kind of passive product that is used for the neonate. It is composed of a bed, guardrail, basket. Intended to contain a child capable of standing. The cage-like design of infant beds restricts the child to the bed. Between one and two years of age, children are able to climb out and are moved to a toddler bed to prevent an injurious fall while escaping the bed. Pigeon Medical is a baby/newborn/infant bed manufacturer in China that has hospital baby beds, cribs, cots for sale. Our products have a lower center of gravity, more mass, a broader base of support, and can hold a larger baby than a bassinet. High quality. Attractive price. Email us today to get more details! How does an infant bed work? Pigeon Medical Infant beds are more stable than bassinets and as such become desirable when a baby can roll, transferring inertia with their actions; a bassinet may tip, an infant bed won't without concerted effort. Around two or three years of age children are able to defeat their confinement and should be moved to a toddler bed to prevent an injurious fall while escaping their bed. Pigeon Medical is one of professional hospital ventilator manufacturers. We provide air oxygen blender, infant CPAP, hospital baby cots for sale, oxygen ventilator machine and so on. Want to know more? Please contact us.

Minimum Order: 1 bags

The MT ferrule is a multi-fiber, plastic ferrule with a square end-face of 6.4x2.5 mm and fiber pitch 0.25mm, widely applied in MPO connectors and AOC cables. 12 and 24-fiber MT ferrules are the most commonly used types. Features of MT Ferrule MT ferrules manufactured by high precision mold technology meet international standards such as IEC 61754-3-31, GR-135 etc. Specification of MT Ferrule Ferrule Type Fiber Hole Diameter (mm) Guide Pin Hole Diameter (mm) Insertion Loss（dB） 12-Fiber MM Standard 0.1255+0.002/-0 0.7±0.001 Typical=0.25 max≤0.5 MM Low Loss 0.1255+0.002/-0 0.7+0/-0.001 Typical=0.12 max≤0.35 SM Standard 0.1250+0.001/-0 0.7+0/-0.001 Typical=0.25 max≤0.7 SM Low Loss 0.1250+0.0007/-0 0.6990+0.0006/-0 Typical=0.12 max≤0.35 24-Fiber MM Standard 0.1255+0.002/-0 0.7±0.001 Typical=0.25 max≤0.5 MM Low Loss 0.1255+0.002/-0 0.7+0/-0.001 Typical=0.12 max≤0.35 SM Standard 0.1250+0.001/-0 0.7+0/-0.001 Typical=0.25 max≤0.7 SM Low Loss 0.1250+0.0007/-0 0.6990+0.0006/-0 Typical=0.12 max≤0.35 T&S Communications is one of professional fiber optic accessories suppliers. We provide WDMs, Fiber Optic Component and so on. Want to know more? Please contact us.

In addition to medicine treatment, respiratory support treatments such as oxygen therapy, invasive mechanical ventilation, non-invasive ventilation, extracorporeal membrane oxygenation (ECMO), and circulatory support are chosen to treat those serious cases of pneumonia. It also plays an important role in the treatment of critically ill patients. As there is shortage of ventilator in many hospitals, sometime HFNC machine is aonther option for doctors to treat patients in some cases, it is considered by doctors for the early infection cases and the recovery stage of patients from critical stages. High Flow Nasal Cannula machine, also known as high flow oxygen therapy machine, is an oxygen(O2) delivery therapy device. As we can know from the name, the machine provides oxygen flow for the nasal cannula, and the rate of the flow would be high. It can be used for neonates or adults when using different type of breathing circuits. As a professional medical devices manufacturer, Pigeon Medical has more than 30 years of experience in producing high-quality respiratory care products. We offer reliable high flow nasal cannula (HFNC) machines at reasonable prices. If you need more information, please contact us, we are ready to support you. Pigeon Medical is one of professional medical ventilator manufacturers. We provide air oxygen blender, infant CPAP, oxygen respiratory equipment and so on. Want to know about high flow nasal cannula machine price and types of high flow nasal cannula? Want to know about hfnc machine price and hfnc machine cost? Please contact us.

Minimum Order: 1 bags

Like MTP/MPO cable, MTP/MPO Shuffle cable is also used for connecting MTP modules together as a permanent link, and it also be used with plug-and-play modules or MTP/MPO connector panels to achieve multi-level connection of the extension of the pre-terminated trunk cable by MTP/MPO panel. Normally, the shuffle cables are used to interconnect cassettes, panels, or ruggedized MTP/MPO fanouts, spanning MDA, HDA, and EDA zones. The difference is that its optical fiber routing is formulated according to the requirements of the optical connection at the construction site, which can realize special optical fiber routing different from the conventional polarity, reducing network installation or reconfiguration time and cost. Features of MTP/MPO Shuffle Cable Low loss performance Up to 288 fibers – ideal for high-density applications Available in OS1, OS2, G.657A2, OM3, OM4 Fiber Grades – OM1 and OM2 available upon request Option for LSZH, OFNP or OFNR cable jacket 100% factory terminated and tested Pulling eyes are provided as an option to protect the fiber ends during installation Save installation and reconfiguration time Applications of MTP/MPO Shuffle Cable Data Centers 40/100G applications Storage area network- fiber channel Parallel optics InfiniBand The internal connector application in fiber equipment Standards Compliance of MTP/MPO Shuffle Cable TIA/EIA-568.3-D and ISO/IEC 11801 IEC-61754-7 & EIA/TIA-604-5&GR-1435-CORE NFPA 262 or IEC 60332 Compliant to Directive 2002/95/EC (RoHS) and REACH SvHC EN 50575 InfiniBand Compliant Specifications of MTP/MPO Shuffle Cable General Specification Construction Description Fiber Count 12-288 Fibers Fiber Mode Single mode: OS2/G657 9/125um Multimode: OM4 50/125um, OM3 50/125um Fiber Brand SMF-28® Ultra optical fiber Corning ClearCurve® multimode fiber Cable Jacket Ratings Riser (OFNR) Plenum (OFNP) Low Smoke Zero Halogen (LSZH) Cable Jacket Color OS2/G657: Yellow OM3: Aqua; OM4: Aqua/Magenta or Customized Polarity Customized Connector Ferrule 12F/16F/ 24F/32F/48F Connector Ferrule Brand US Conec, HANKUSAN, Nissin Connector Type MTP Female, Male; MPO Female, Male Connector Brand US Conec MTP, Senko MPO, Nissin MPO, Sanwa MPO, FURUKAWA MPO Connector Color Ferrule SM(APC) SM(PC) OM3 OM4 or Customized Low loss Yellow Yellow Aqua Magenta Standard Green Blue Aqua Magenta Connector Boot Color Green/Black/ or Customized Pulling eye Customized Operating Temperature -20°C to +70°C Storage Temperature -40°C to +85°C Technical Specification Optical Properties Single mode Multimode Insertion Loss (dB) Low loss Standard Low loss Standard ≤0.35(Typical:≤0.25) ≤0.75(Typical:≤0.4) ≤0.35(Typical:≤0.2) ≤0.5(Typical:≤0.35) Return Loss (dB) PC≥50; APC≥60 PC≥20; APC≥40 Wavelength (nm) 1310/1550 850/1300 Durability ≤0.3 (dB)typical change, 50 matings Fiber Attenuation (dB/km) Single Mode: ≤0.35 at 1310nm, ≤0.2 at 1550nm Multimode: ≤2.3 at 850nm, ≤0.6 at 1300nm Typical Cable Structure of MTP/MPO Shuffle Cable Fiber Count OD(mm) Nominal Weight(kg/km) Max.Tension(N) Max.Crushing Resistane(N/100) Short term long Term Short term long Term 12 3.0±0.1 8.1 150 80 500 150 24 3.0±0.1 8.5 160 80 500 150 24 9.0±0.5 72 500 180 1000 300 36 9.0±0.5 78 500 180 1000 300 48 9.0±0.5 79 600 200 1000 300 60~72 11.2±0.5 126 1000 300 1000 300 96 13.5±0.5 178 1000 300 1000 300 144 17.5±0.5 285 1000 300 1000 300 Note: The true weight of optical cable may have some tolerance with the above-stated value. T&S Communications is one of professional fiber optic accessories suppliers. We provide WDMs, Fiber Optic Component and so on. Want to know more? Please contact us.

T & S MTP / MPO fiber loop is a device used for parallel connection tests and an aging test of optical communication equipment. Well-designed by engineers at T&S, our MTP/MPO loopback adapter can transmit the optical network signal from the transmitter to the receiver, thereby forming the optical signal receiving and transmitting loop. MTP / MPO fiber loop provides a fast and efficient way to test the transmission capacity and receiving sensitivity of optical network equipment. T & S MTP / MPO fiber loop has 8F, 12F, 16F, 24F, 32F channels with low loss and conventional loss, single-mode and multi-mode options. Our MTP/MPO loopback adapter is now widely used for optical network equipment self-test, network diagnosis, and test, etc. Specifications of MTP/MPO Loopback General Specification Construction Description Fiber Count 2fibers for duplex type; 2-24fibers for multi-fiber connector Fiber Mode Single mode: OS2/G657 9/125um Multimode: OM1 62.5/125 um OM2 OM3OM4 50/125um; Fiber Brand Corning SMF-28® Ultra optical fiber Corning ClearCurve® multimode fiber Cable Jacket Ratings Low Smoke Zero Halogen (LSZH) Riser (OFNR) Plenum (OFNP) Cable Jacket Color OS2/G657: Yellow OM1&OM2: Orange OM3: Aqua; OM4: Aqua/Magenta or Customized Polarity Type A, Type B, Type C (TIA-568.3-D) or Customized Connector Type SC LC MPO MTP Connector Color (SC LC) SM(APC) SM(PC) OM3 OM4 or customized Green Blue Aqua Magenta/Aqua Connector Color (MPO MTP) SM(APC) SM(PC) OM3 OM4 or customized Low Loss Yellow Yellow Aqua Magenta/Aqua Standard Green Blue Aqua Magenta/Aqua Loopback housing color black Operating Temperature -20°C to + 70°C Storage Temperature -40°C to + 85°C Technical Specification Optical Properties Singlemode Multimode Insertion Loss (dB) APC ≤ 0.30 (Typical:≤ 0.15 ) UPC ≤ 0.20 (Typical:≤ 0.1 ) APC ≤ 0.30 (Typical:≤ 0.10 ) PC ≤ 0.20 (Typical:≤ 0.1 ) Insertion Loss (dB) Low loss≤ 0.35 (Typical:≤ 0.25 ) Low loss≤ 0.35 (Typical:≤ 0.2 ) Standard Loss≤0.75 (Typical:≤ 0.4 ) Standard Loss≤ 0.6 (Typical:≤ 0.35 ) Return Loss (dB) PC≥50; APC≥60 PC≥20; APC≥40 Wavelength (nm) Singlemode: 1310/1550, Multimode: 850/1300 Fiber Attenuation (dB/km) Singlemode: ≤0.35 at 1310nm, ≤0.2 at 1550nm Multimode: ≤2.3 at 850nm, ≤0.6 at 1300nm Transmission Distance OM4: 150m at 40/100G, 550m at 10G OM3: 100m at 40/100G, 300m at 10G MTP Loopback with Housing and Pull-tab  The MTP loopback occupies both ends of fiber in a duplex connector or a multi-fiber connector. This MTP lookback with housing and pull-tab can provide an effective solution so as to test the emission ability of the network equipment and receive sensitivity. Especially in 40/100G network communication, our MTP loopback devices can achieve optical fiber network in pairs on a single element or interface and conduct effective tests and evaluation of the Internet through back signal positioning. T&S Communications is a professional fiber optic products supplier. We provide WDMs, Fiber Optic Component and so on. Want to know about ts communication? Please contact us.

T & S MTP Cable Assemblies / MPO cable assembly meets the requirements of IEC61754, IEC61755, TIA568, GR1435 and other standards, and adopts a push- pull locking structure with male and female heads to ensure butt tightness and low loss. Single head loss of SM product: conventional product IL ≤ 0.75db, RL ≥ 60dB; elite product IL ≤ 0.35db, RL ≥ 60dB. Single head loss of MM product: conventional product IL ≤ 0.60db, RL ≥ 20dB; elite product IL ≤ 0.35db, RL ≥ 20dB. The optical fiber channel is used for termination and supports high bandwidth applications. It is specially designed to save cable management time and high-density fiber distribution area. The outer diameter of the optical cable can match the pre-termination of Ø 2.0 ~ 5.5mm, and the spring elasticity of 9.8N and 20n can be matched; mm supports 10g, 40g, 100g and 400g applications. FAQs of MTP/MPO Cable Assembly What Is The Minimum Length For A Mtp/mpo Trunk Cable?  For trunk cable, minimum length is 0.3 in general. For customized requirements, please contact T&S sales team for details. MTP Connector and MPO Connector MTP connector is one type of MPO connector with even greater optical and mechanical performance when compared to ordinary MPO connectors. MTP is the brand of its better designed MPO connector owned by USConec. What's The Difference Between Ofnp And Lszh Cable Jacket? OFNP (plenum) jacket is of the highest fire retardant rate. It gives off little smoke when on fire, LSZH (Low Smoke Zero Halogen) cable jacket is composed of thermoset compounds that emit limited smoke and no halogens when exposed to flame. At T&S, there are various jackets of different colors and materials for you to choose from. T&S Communications is a professional fiber optic products supplier. We provide WDMs, Fiber Optic Component and so on. Want to know more? Please contact us.

Fiber optical master cord and bus cord are produced by standard ferrule with high-standard connector kits via special production process. According to different application requirements, the master cord can be generally divided into two grades: bus cord and master card. The product has characteristics like low loss, good consistency and good interchangeability, which can minimize the impact of the test system on the test results. It is widely used in product testing, instrument calibrations. Application of Master Cord Produced by T&S, a professional supplier of fiber optic connectivity products, our master cords can be applied to the following occasions: measure the connection/insertion loss by physical contact measure the direction of eccentricity measure return loss by physical contact Manufactured under strict quality control, our fiber optical master cords are of consistently high quality. T&S Communications is one of professional fiber optic accessories suppliers. We provide WDMs, Fiber Optic Component and so on. Want to know more? Please contact us.

Bomba trasvase de lIquidos oleosos de palanca / Bomba de metal para trasiego de liquidos D-490 Steel Lever Action Oil Transfer Drum Pump Art No.:GT109 Variable Stroke Oil Hand Lever Drum Pump Material:Cast Iron Seal Material:NBR Piston:PP Bung Adapter:1-1/2” & 2” Inlet / Outlet Dia:35mm / 19mm Product Length:1380mm Capacity:350cc/Stroke , Flowing:20L/Min Suction / Lift:3m / 5m Applicable Drums:15 - 55 Gallon Packing:1PC/BOX,10PCS/CTN N/G Weight:20/22KGS Carton Size:48 x 29 x 33cm Applications:Diesel, Kerosene, Engine oil, Hydraulic Oil

Minimum Order: 100

As the " Optical Fiber Sensing Engineering Technology R&D Center of Guangdong Province " , T&S takes the frontier application and development of fiber grating sensing technology as the main research direction and introduces the most practical and creative products to the market. FBG Sensor Being a fiber optic sensor, a FBG sensor has all the advantages usually attributed to these devices, such as low loss relative to the fiber length, immunity to electromagnetic and radio frequency interference, small size and weight, intrinsically safe operation in environments characterized by hazardous materials, high sensitivity and long-term reliability. In addition, fiber Bragg grating technology reveals an inherent serial multiplexing capacity and an ability to provide absolute measurements without the need for referencing. This makes it a natural alternative to conventional electrical sensing technologies. ID Reflector FBG ID Reflector can be used in FTTX fiber trouble-shooting monitoring. The combination of the OTDR and FBG Reflector can detect and locate fiber faults in minutes, protect the investment of unused fibers, and reduce the cost of maintenance. FBG ID Reflector is one of the two solutions under U-band Reflector (The other is Thin Film based TFR, and both the two are available at T&S.). FBG Reflector has been granted China patent and US patent. According to the standard ITU-T G.982, the reflectance of any optical component between ONU and OLT should be better than -35dB, which makes FBG Fiber Reflector a perfect solution. T&S FBG Fiber reflectors are designed in different encapsulation forms to fit different applications. Customized encapsulations are also available. T&S Communications is a professional fiber bragg grating manufacturer. We provide WDMs, Fiber Optic Component and so on. Want to know about ts communication? Please contact us.

FBG Strain Sensor measures the strain by utilizing the inherent feature of strain sensitivity of FBG. The kind of FBG sensor fits to be embedded to measure the strain in a ban, bridge, tunnel, and other constructions. Features of FBG Strain Sensor High precision Resistant to electromagnetic interference Quick response High stability and reliability Effective lattice network for multi-point measurement Specifications of FBG Strain Sensor Item Unit Value Wavelength nm 1510~1590 range με 5000 Resolution με 1 precision με 5 Connector type --- FC/APC or Customize Cable type mm Φ3 Size mm Φ17×70 T&S Communications is a professional fiber optic products supplier. We provide WDMs, Fiber Optic Component and so on. Want to know more? Please contact us.

Pigeon Medical air-oxygen blender is a device used by medical personnel to control the concentration and flow of oxygen for the rescue of patients with hypoxic problems while avoiding the side effects of pure oxygen inhalation. It provides the ability to mixed air and oxygen in a safe, easy and controlled manner, supporting the use of ventilator, HFNC, infant resuscitator, infant radiant warmer, CPAP, especially suitable for those who have high requirement for oxygen concentration. Scope of application: Premature infants, newborns, infants, and mothers have good clinical effects on children with fetal fluid inhalation, acute pneumonia, pulmonary hemorrhage and hypoxemia, which can avoid the sequelae caused by traditional treatment of respiratory pure oxygen. Pigeon Medical is a medical breathing equipment manufacturer in China. We can offer different types of medical air oxygen blender, low & high flow air O2 mixer, and CPAP blender. Contact us to check out the attractive price and get more details! How does an air oxygen blender work? The surface of Pigeon Medical air-oxygen blender is processed with anodic oxidation. Concentration level from 21%-100% of medical oxygen will be configured by adjusting the proportion of oxygen and air. Alarming system of differential pressure is equipped, on the occasion of alarming, the safety valve starts automatically and produces the mixed gas continuously to ensure the safety of the patients. In order to offer maximum flexibility, the Blenders can be specified for either mounting on a pole or rail, with or without gas hoses, with a variety flow LPM of flow meters. In addition, we provide model with optional double output ports (AD3000-SPD2) can supply gas to two machines at a time FAQs of Air Oxygen Blender Q Is the blender able to support two machines at the same time? A Blender model AD3000-SPD2 equipped with two flow meter on each side to supply gas to two machines at a time. Plus, the flow meter can be customized base on your demand. Q Do we have to purchase the air/oxygen hose and connector separetely? A No. The air/oxygen hose and connector will come together with the blender. Other than that, you can add accessories such as humidification bottle or oxygen regular with a budget deal. Q Is power source nesscessary to activate the alarm system? A No. The air-oxygen blender is 100% electric free. The alarm activates automatically by mechanical measure of differential pressure. Pigeon Medical is one of professional medical ventilator companies. We provide air oxygen blender, infant CPAP, air oxygen blender mixer and so on. Want to know more? Please contact us.

Minimum Order: 1 bags

FBG sensors can be deployed in harsh environments including high temperature, high radiation, high vacuum, high pressure, and low- temperature, such as power transformer, switch cabinet and other power equipment hot spot monitoring; high-power generator vibration and temperature monitoring; wind blade monitoring; aircraft fuel tank stress monitoring; thermal nuclear reactor strain, temperature, and displacement monitoring; spacecraft monitoring and so on. As a professional fiber Bragg grating manufacturer, T&S can provide you with high-quality sensor FBG at reasonable prices, our production line includes FBG strain sensor, FBG temperature sensor, fiber bragg grating pressure sensor, etc. Please feel free to leave us a message. FBG Sensor Application Commercial transportation Complicated sensing of humidity, high voltage, oil, etc. Advanced telecommunications Multi-point measurements Wind blade monitoring Aircraft fuel tank stress monitoring Spacecraft monitoring Optical Strain Gauge - How Does It Work? Though mainly used to measure strain, the fiber Bragg grating pressure sensor can actually be integrated into different types of transducers. It can effectively conduct the functions of measuring temperature, acceleration, or displacement. In comparison with the traditional electrical strain gauges, the sensor FBG does not need any electricity. Working on the basis of the light that propagates through a fiber, the FBG pressure sensor are completely passive and immune. However, it should be noted that normally, the FBG sensors are extremely susceptible to temperature. The fiber will expand when the temperature rises and contract when the temperature drops. Thus, it is important to make sure temperature compensation towards the sensor FBG is well done during its working time. FBG Sensor FAQs Where can FBG temperature sensors be used? Due to its good insulation performance, explosion-proof, waterproof and anti-electromagnetic interference ability, FBG temperature sensors is especially suitable for complex applications such as humidity, high voltage, oil and so on. Does the FBG sensor need maintenance after installation? After the installation and debugging of the sensor FBG, no additional maintenance is needed. You will only need to protect the FBG pressure sensors from damage and fracture. T&S Communications is one of professional fiber optic accessories suppliers. We provide WDMs, Fiber Optic Component and so on. Want to know more? Please contact us.