Offers to Sell

Bomba Engrase Manual Palanca Inyector Grasa 100 Gr 100CC Grease Gun ( GH003 ) Old Model Working Pressure: 4500Psi Max Pressure: 12000Psi Capacity: 100CC Packing: 25PCS/CTN G/N Weight: 18/17KGS Carton Size: 32 x 33 x 29CM

Minimum Order: 100

Bomba Manual De Pie Para Aceites Y Grasas Para Cajar Y Diferenciales Autos - 5L/10L/16L Hand Grease Bucket Pump - 5L Model:5L Size:30 x 23 x 45cm Weight:4.75Kgs Material:Steel Thickness:2mm Working Pressure :4500PSI Max Pressure :12000PSI Hose Length:2.5m Surface:Powder Coat Packing:2 PC Net/Gross Weight:9/10Kgs Carton Size:47 x 31 x 47cm ----------------------- Hand Grease Bucket Pump - 10L Size:38 x 28 x 48cm Weight:6Kgs Material:Steel < , br>Thickness:2mm Working Pressure :4500PSI Max Pressure :12000PSI Hose Length:2.5m Surface:Powder Coat Packing:2 PC Net/Gross Weight:12/13Kgs Carton Size:57 x 39 x 49cm ---------------------- Hand Grease Bucket Pump - 16L Size:38 x 28 x 58cm Weight:6.75Kgs Material:Steel Thickness:2mm Working Pressure :4500PSI Max Pressure :12000PSI Hose Length:2.5m Surface:Powder Coat Packing:2 PC Net/Gross Weight:14/15Kgs Carton Size:57 x 39 x 59cm

Minimum Order: 100

MF72 Power NTC Thermistor Series Characteristic Fast response to surge corrent. Small size, strong power and strong capability of surge current protection Fast response to surge corrent Big material constant (B value), Small remain resistance Longevity of service, High reliability Integral series, extensive operating range Application Coversion power-supply, switch power, ups power Electronic energy saving lamps, electronic ballast and all kinds of electric heater All kinds of RT, display Bulb and other lighting lamps What is a Thermistor? Get the answer from our well-experienced professionals NTC thermistor is a thermally sensitive element composed of semiconductive fine ceramics. The name thermistor comes from “a thermally sensitive resistor”, and its resistance drastically changes with temperature . The resistance of ordinary materials rises slightly as temperature rises, whereas NTC (negative temperature coefficient) thermistors exhibit a sharp decrease in resistace. Thermsitors manufactured and supplied by Nanjing Shiheng are all NTC thermistors. The following descriptions are appliance only to NTC thermistors. Thermsitors are made from transition metal oxides, primarily of Mn,Ni and Co,sintered into a fine ceramic body. Shiheng’s thermistors cover a wide range of temperatures from -50 to 500 ℃ that is required for daily temperature control. Our compact, stable and highly sensitive thermistors are used in large quantities as temperature sensors and for temperature compensation in many fileds such as home appliances and industrial equipment.

Minimum Order: 1000

Polymer positive temperature coefficient thermistor(Battery series) Characteristics Low-resistance, small in size Wide working current Overcurrent and over-temperature protection are fast The initial state can be automatically retored after trouble shooting. Ceramic PTC Thermistor Application Computer and peripheral equipment,mobile phone Batteries,telecommunication and network equipment,transformers Industrial control equipment,automobile and other electronic products Our brand : Shiheng Electronics

Minimum Order: 1000

CMF SMT NTC Thermistors Characteristics： Miniature size No lead, ideal for high density SMT installation Superior solderability and resistance to soldering heat Ideal for wave or reflow soldering Small size Non-standard resistance values SMT NTC Thermistors Applications： Temperature compensation of IC, LCD,transistor,crytal oscillator of mobile communications equipments Temperature sensor for rechargeable batteries Temperature compensation of several kinds of circuits It is intended for temperature measurement, control and compensation applications throughout many industries such as industrial, telecom and consumer electronics. Typical applications include rechargeable battery packs, TCXO’s, Gas sensor temperature compensation, LCD compensation and CPU temperature monitoring. The SMT sensors are suitable for standard soldering, epoxy and wire bond techniques. Other sizes, resistance values and tolerances are available. Shiheng Electronics NTC Thermistors are available in SMT, leaded or leadless form; provide multiple stability options, wide resistance range with option to offer customized solutions to meet customers requirements.Thermistors are widely used for temperature sensing or temperature compensation in general purpose, industrial, automotive or custom high reliability applications. Shiheng Chip NTC Thermistors are high quality devices developed especially for surface mounting applications. They are widely used for temperature compensation, but can also achieve temperature control of printed circuits in a wide range of applications, including general purpose, automotive, or custom high reliability. SMD Thermistors are available with Ni barrier/100% Sn termination for lead free soldering or with PdAg termination for hybrid assembly.

Minimum Order: 1000

MF59 Glass Shell SMD NTC Thermistors MF59 glass encapsulated NTC thermistor excellent long-term stability and reliability even when encountering harsh environments and temperatures up 220°C. Excellent reliability and able to withstand temperatures up to 220°C, the LL-41 temperature sensor has glass encapsulation for applications where space isn’t an issue. Tape and reel is available for ease of use. Shiheng Electronics Characteristic: High temperature capability up to +220°C Sealed glass package, capability of operating in the harsh environment Surface Mount Excellent long-term stability, high precision, broad range of resistance Tape and reel packaging is available Without leads, convenient for SMT automatic installation. More information you can click here Application: Automatic work facilities (such as lap-top, copycat, printer and so on) Digital equipment(such as mobile phone, PDA and etc.) Rechargeable battery (lithium battery, ni-mh battery Temperature compensation of loops of instrument, integrated circuit, quartz crystal monofier and thermocouple). The range of resistance under the rated zero power(R25): 0.1~1000KΩ Glass Encapsulated Thermistor The allowable tolerance of R25: ±1%、±2%、±3%、±5%、±10% The allowable tolerance of B value: ±0.5%、±1% Dissipation factor: model A≥2mW/℃(in still air),model B≥1mW/℃ (in still air) Thermal time constant: model A≤10S(in still air),model B≤ 5S(in still air) operating temperature range: -55℃~220℃ Rated power at 25℃:model A≤10mW,model B≤5mW https://www.ntcshiheng.com/ The latest products relates to a chip-type glass-encapsulated negative temperature coefficient thermistor. It has a glass shell, a thermistor chip and two metal electrodes. The metal electrode is a SMT type, and thermistor chip is fixed in a glass shell. Two metal electrodes are installed at both ends of the glass shell. The metal electrodes at both ends are respectively connected to the electrodes on both sides of the resistance chip through a conductive body integrated with the metal electrode, and the conductive body and the resistance chip are encapsulated in a glass case at a high temperature. The utility model is electrically connected to the outside through a metal electrode, which requires less installation space, more convenient installation, no lead bending, and it is not easy to damage the product during installation.

Minimum Order: 1000

MF52F Temp-Measurement NTC Thermistor Series Shiheng Electronics Application Air condition Equipments/ Heating Apparatus/Electric Thermometer/Liquid Level Sensor/ Automobile Electricity/ Electric Table-board/ Battery of Mobile Telephone Characteristic high precision NTC thermistors Small size, Fast response Steady Operating for long time Good quality of copherence and interchange Scale production, high ratio of features to cost This is a property of a Negative Temperature Coefficient resistor (NTC ). There are also thermistors that have Positive Temperature Coefficient (PTC for short) which means as the temperature increases, the resistance increases. However, PTC thermistors have a sort of tipping point and greatly change the resistance at some temperature. This makes the PTC thermistor a little harder to interface with. For this reason, for most low-cost temperature measurement, NTC thermistors are preferred. For the remainder of the article, you can assume we'll be referring to NTC type thermistors. Knowing the temperature in a project can a very useful piece of data to have handy. Knowledge of temperature can help regulate room temperature for a comfortable environment, ensure that a 3D printer bed is hot enough for materials like ABS to stick to its surface, prevent engine overheating, and keep food from being burnt. For this article, we are only concerned with one type of sensor that can measure temperature. This sensor is called a thermistor.

Minimum Order: 1000

Raw material sea shell from Vietnam Quick Details Material: Organic Material Type: Seashell Technique: Other Style: Nautical Use: Souvenir Theme: Animal Regional Feature: Viet Nam Place of Origin: Ho Chi Minh City, Vietnam Brand Name: VIETNAM Model Number: VIVIAN Supply Ability Supply Ability: 5 Ton/Tons per Month Packaging & Delivery Packaging Details: pp Port: hcmc HEAD OFFICE VIET DELTA CORP Address: 20/5 Dinh Bo Linh St., Ward 24, Binh Thanh Dist, Ho Chi Minh City, Vietnam Telephone: (84.28) 3511 6807 Fax: (84.28) 3511 9559 E-mail: info@vdelta.com.vn Website: Vdelta.com.vn

Minimum Order: 1 bags

Quick details Type :Fruit Extract Shape :Powder Various :gac extract Parts :Gac fruit Extraction type :Liquid-Solid Extraction Packaging :Drum, Plastic Container, Vacuum Packed Place of origin :Ho Chi Minh City, Vietnam Class :Food Brand name :VIET DELTA Color :organge Product Name :gac powder Appearance :organge powder Certificate :GMO Supply Ability Supply Ability:100 Tons / Tons per Month Packaging & Shipping Packaging Details:As customer required Port:Ho Chi Minh Port HEAD OFFICE VIET DELTA CORP Address: 20/5 Dinh Bo Linh St., Ward 24, Binh Thanh Dist, Ho Chi Minh City, Vietnam Telephone: (84.28) 3511 7925 Fax: (84.28) 3511 9559 E-mail: info@vdelta.com.vn Website: Vdelta.com.vn

Minimum Order: 1000

Quick details Style :Fresh Type :Carrot Product type :Umbelliferous Vegetabless Various :Red Carrot Cultivation type :The usual Color :Natural Orange Size (cm) :10 Certification :ISO, HACCP Weight (kg) :0.25 Place of origin :Lam Dong, Vietnam Brand name :Viet Delta Product style :Vegetable Umbel Processing :IQF Frozen Taste :Sweet Shape :Oval-round Season :The following June-March Parts :Root Supply Ability Supply Ability:10 Ton / ton per Day Packaging & Shipping Packaging Details:Depends on customer's request Port:Ho Chi Minh port HEAD OFFICE VIET DELTA CORP Address: 20/5 Dinh Bo Linh St., Ward 24, Binh Thanh Dist, Ho Chi Minh City, Vietnam Telephone: (84.28) 3511 7925 Fax: (84.28) 3511 9559 E-mail: info@vdelta.com.vn Website: Vdelta.com.vn

Minimum Order: 1000

AdTech aluminum granular flux is used for the degassing and slag removal of molten aluminum, which solves the problem of burning caused by chemical reaction and environmental pollution caused by smoke when the traditional flux is put into molten aluminum. The dosage is small and the effect is excellent. , It is the best choice for degassing and slagging of aluminum alloy casting.

Minimum Order: 1 bags

Refractory fiber cone is also called ceramic fiber tap out cone. The furnace tap out cone is mainly used for controlling the liquid metal flow. AdTech refractory tap out cone adopts high-aluminum fiber, forms by the vacuum suction automatic equipment molding process. Each cone has a flat surface. More importantly, it has the features of appropriate hardness and toughness, not fragile, not peeling. Ceramic fiber tap out cone is suitable for mechanical or manual plugging and removal operations. AdTech ceramic fiber tap out cones are used in aluminum furnaces, fixed furnaces and other aluminum outlets. It makes the casting process of aluminum alloys more convenient, safe, and reliable.

Minimum Order: 1 bags

The aluminum silicate casting nozzle material is a key component of the aluminum strip continuous casting and rolling mill. Its quality directly affects the quality of the strip and the yield of production. The aluminum silicate casting nozzle material depends on the performance and It can be divided into multiple models if necessary. AdTech casting tips are dimensionally stable, thermal shock resistant and do not cause outgassing. Ceramic caster tip can effectively protect the quality of the cast and rolled coils. It is best used together with boron nitride paint. AdTech caster tip is used to produce high-grade aluminum alloy. Ceramic fiber caster tip consists of alumina ceramic liner and castertip ear. AdTech offers all of the component pieces required for continuous casting tip assemblies such as end dams, spacer boards, internal baffles, boron nitride coatings.

Minimum Order: 1 bags

Bomba De Engrase Neumática Engrasadora Lubricar 40 Kg GZ-16B Pneumatic Grease Pump - 40L Capacity:40L Size:35 x 35 x 85cm Weight:14Kgs Pressure Ratio:50 : 1 Working Pressure:25 - 48Mpa Air Pressure:0.5 - 0.8MPA Flow Rate:0 - 0.8L/Min Hose Length:4m Nozzle:1 PC Packing:1 PC Net/Gross Weight:14/15Kgs Carton Size:37 x 37 x 80cm

Minimum Order: 100