Offers to Sell

Pistolet graisseur à levier / Pompe à lubrification à poignée 600CC High Pressure Grease Gun ( GH019 ) Working Pressure: 4500Psi Max Pressure: 12000Psi Capacity: 600cc Packing: 12PCS/CTN G/N Weight: 18/17KGS Carton Size: 37 x 28 x 45CM

Minimum Order: 100

How should we select Al or Al-plastic film in “cell to pack” structure of blade-like battery and “811”battery? GLPOLY thermally conductive structrual adhesive is overturning the market. With the boom of “cell to pack” structure of battery pack, a dramatic increase in energy density raised. But battery pack thermal management is lagging behind. In such a situation, GLPOLY has launched XK-D series of thermally conductive structural adhesive to solve thermally conductive and bonding strength problems of “cell to pack” battery pack. Here is the analysis for your reference. 1) According to our DFEAM , when the Al-plastic film used, we found that the bonding strength of Al-plastic film is less than 1.0MPa, “Al-plastic film” structural battery pack will be destroyed, even cause explosion easily in disaster impact. Al-Al is the best for reliability, security and enviromental adaptability, even the cost. 2) At present, there is a dozen varieties of three kind of categories, including”Al-Epoxy film”, “Al-PVC film” and “Al-Acrylic film” at least, even more fake products. 3) Cost: “Al-Al” structure is the most economical way at present. 4) More seriously, many engineers deemed that thermally conductive epoxy adhesive is brittle and raised resistance to our XK-D series of thermally conductive epoxy adhesive. Actually, our XK-D products provide a better elasticity than nylon. 5) Some engineers prefered Polyurethane based thermally conductive adhesive to Epoxy based thermally conductive structural adhesive. If the “Al-Plastic film” was not abandoned, the polyurethane could not bring you any benefits too. This will offer market space to fake products. GLPOLY two-component thermally conductive structural adhesive has been applied to celle to pack battery pack in several car makers and battery pack manufacturers. GLPOLY has partnered with dJI, Huawei Marine, DT Mobile, Han’s Laser etc top-class brands, providing high performance thermal interface materials for them to protect their brand reputation for performance and reliability.

Minimum Order: 10 long tons

It sounds easy and simple to make thermally conductive insulator, but there are just two or three high quality thermal insulator manufacturers, GLPOLY is one of them. For many thermal management engineer, Bergquist thermally conductive insulator is preferred, or take it as benchmark even they don’t use it finally. The main raw materials are fiberglass(or PI), silicone oil and thermally conductive powder. it is very simple, isn’t it? but few of manfacturers can make quality thermal insulator with high performance and reliability. There are always some problems, either the low thermal performance or dielectric strength. We are not undervaluing peers, I have experienced that some peers bought thermally conductive insulator from us. GLPOLY is one of the leading expert in the development and production of thermal insulator, taking Bergquist etc as benchmark. A motorized chair mannufacturer consulted us about thermally conductive insulator. They wanted to use a local alternative product to replace Bergquist Sil-Pad 900S, requesting an equivalent of performance or better. The customer had tested many similar samples before and failed each of them, because the temperature rise of chip is 95 degree, exceeding design requirement. Customer is misguided in expecting an higher thermal conductivity. We recommended a thermal insulator XK-F20ST1 with 2.3W/mK, but customer doubted whether the thermal conductivit is high enough, “the thermal conductivity of samples we had tested before were 2.0W/mK, is 2.3W/mK enough?“. Actually, in order to enhance dielectric strength, some suppliers use materials which is detremtal to heat transfer and customer doesn’t know detail. We suggest customer test it first, “the cost high performance thermal matieral is proportional to thermal conductivity, we must consider the necessary of using a higher performance thermal material. If it is unworkable, we’ll provide another high performance product”. Customer accepted our suggestion and tested the 2.3W/mK thermally conductive insulator. Finally, customer was surprised by result, during the entire testing process, the temperature never exceeded 80 degree. Compared with Bergquist Sil-Pad 900S, GLPOLY XK-F20ST1 thermally conductive insulator provided high thermal performance as Sil-Pad 900S does, at the meantime, with a favorable price and shorter lead time. GLPOLY XK-F20ST1 is a high performance, electrical insulation thermally conductive insulator with low thermal impedance 0.22℃in2/W. It has a dielectric voltage of 3.5kV, providing excellent reliability. XK-F20ST1 thermal insulator is one or two sided soft-tack for ease of assembly. The soft natura makes interface contact more fully, optimizing heat transfer. GLPOLY has been providing thermal insulator for DJI and Han’s Laser etc top-class enterprises for several years. GLPOLY help keep you design beakthroughs with complete portfolio of thermal management materials.

Minimum Order: 10 long tons

GLPOLY Thermal Gap Pad XK-P20 has been designating to use for charger PCB thermal management by some top-class customers. GLPOLY had been cooperating with Star charger company for five years on DC charger thermal management, projects including Benz, Audi, GAC, NIO, Xiaopeng etc, I guess GLPOLY XK-P20 thermal pad is the only one that had been applied for so many new energy projects. With the boom of new energy electric vehicle, the charger industry is developed rapidly. Thermal gap pad is not only used in battery pack but also in charger, everybody wants to run into this huge market, and says”we are expert in thermal interface material manufacturing, we’ll provide you with quality product.”Is it so easy to become a professional supplier? Can you find a quality thermal gap pad easily? I think it is negative. Now, GLPOLY provides Star charger company with more than ten types of thermal silicone pad, GLPOLY XK-P20 is designated for each design. We learned that chief engineer of this customer collected our brochure in productronicachina, and impressed by our complete portfolio of products and professional thermal management solution. When they developed new project, the chief engineer recommended us. The chief engineer requested a thermal pad with thermal conductivity of 2.0W/mK and high compression, which will be used between charger PCB and aluminum plate. We recommended XK-P20 and delivered samples in three days. One week later, the chief engineer told us that samples performed well and temperature was as expected. Then reliability test lasted for one month, during the test, every parameter was within permitted tolerance. “GLPOLY XK-P20 is the only meeting our requirements that I had ever test, I don’t need to test the rest.”Why does customer trust us so much? Because we have been providing thermal gap pad for CATL, GAC etc top class enterprises for years. GLPOLY is one of the first companies that entered automotive industry, such as automotive electronics, battery pack and motor control system, providing thermal management materials for NIO, GAC. GLPOLY is IATF16949 certified, quality products help keep your devices performing stable.

Minimum Order: 10 long tons

There are many thermal management materials manufacturers and EMI absorbing materials manufacturers, but just a few of them who can make a product combining two functions, GLPOLY is one of them. In recent years, with thermal management materials booming, many EMI absorbing materials manufacturers run into the field of thermal management materials, they produced a lot of products, but none of them emerged as a industrial leader. Worldwide, Laird is one of the best suppliers that can provide hybrid thermal and EMI absorbing materials. Though hybrid thermal and EMI absorbing material has been applying in some specific application, GLPOLY had invested plentiful resources to develop hybrid thermal and EMI absorbing materials, launching pad and gel products. A medical equipment manufacturer consulted me about thermal and EMI absorbing materials and gave me a product model,”can you provide Laird coolzorb 500?”. This product provides high thermal performance and EMI absorbing within frequency of 1-70GHz, it is really a wonderful product.”We have our own product and we can provide alternatives.” Customer didn’t believe me, because he had tested many samples that supplied by domestic suppliers, eithher thermal performance or EMI absorbing unsatisfied the requirements. We provided sample XK-J25 for testing, the result will be compared with Laird coolzorb 500’s data, not physical testing. But finally, customer was surprised, thermal performace and EMI absorbing are within tolerance desgined. GLPOLY XK-J25 is a high performance, thermally conductive, EMI absorbing within 1-77GHz gap filler material with thermal conductivity of 2.5W/mK. It features low hardness, high compression, optimizing interface contact and heat transfer. XK-J25 hybrid thermal and EMI absorbing material is designed for high frequency IC chip, telecommunication, medical equipment and millimeter wave radar and more. GLPOLY has been supplying thermal management materials to Huawei, NIO and GAC, etc. We serve top three of their industry with superior quality.

Minimum Order: 10 long tons

GLPOLY XK-G30 is high performance, low thermal impedance thermal gel with a thermal conductivity of 3.0W/mK, it is ideal for AI equipment. Some suppliers marked “for AI product thermal management”on specification and deceived customers with fake data, unfortunately, long-term reliability test will tell the truth. Freetech Auto Pilot, a famous service pilot solution supplier, the engineer consulted us about thermal management materials for autonomous sweeping vehicle. He stated definitely”firstly, thermal conductivity is 3.0W/mK or greater, secondly, 10-year service life”. Most of suppliers failed to satisfy these two requirements. But to GLPOLY, these were not barriers any more, we were not bragging, we showed customer the test of object. Five XK-G30 samples was sent to customer in Beijing, the test will last for one month. During the test, the customer rised another question: can you do aging test at the same when we test it? we want to see wheather the results are consistent. When the test was finished, the result surprised customer, data from two tests were within the tolerance of requirement statement. “GLPOLY XK-G30 is the best we have ever tested, it is alternative to Chomerics THERM-A-GAP GEL30”. GLPOLY intrduced automated production lines, eliminating artificial error and keeping product consistent. It is cartridge package desiged for automated dispensing production, decreasing time consuming hand assembly, reducing labor cost and improving productivity. GLPOLY takes Bergquist, Chomerics and Laird as benchmark, providing quality exceptional performance thermal interface materials and design flexibility.

Distributeur de graisse standard à pédale 10kg Pedal Grease Pump - 10L Size:42 x 21.5 x 56.5cm Weight:13.5Kgs Output Pressure :25Mpa Max Pressure :30Mpa Output :3G/Stroke Surface:Powder Coat Hose Length:1.8m Packing 1 PC Net/Gross Weight:13.5/14Kgs Carton Size:43 x 22 x 57.5cm

Minimum Order: 100

Medical Bed Head Unit SB013 1. It made of high quality aluminum alloy material, surface finish is customized ( powder coating, electrophoresis, anodized ) 2. Beautiful appearance, Wear-resistant, easy to clean. 3. Gas and strong and weak circuits are separated by dual channels, safe and reliable 4. It can select the power outlet, flash light, call, intercom, gas terminal, etc. It can make the installation holes according to customers'requirement. 5. The color of panel and side panel is customized. Get the medical bed head unit price, click here EZONG bed head unit hospital What is a Medical Bed Head Unit? The hospital bed head unit is specially designed to meet the needs of hospital wards. It is an indispensable air outlet control device for medical gas pipeline systems. The medical bedside unit is installed on the wall of the bed. The bedside unit can be equipped with a nurse's phone, an intercom panel, or reserve mounting holes according to the needs of the hospital. The color of the bedside unit with panel and side panel should be customized according to the choice of the hospital and the color of the ward wall. In hospitals, bedside units are essential, and the right tools at your fingertips are the key to providing optimal care. https://www.yizhongalu.com/product-medica , l-bed-head-unit-sb013.html Bed Head Unit Feature 1. Medical gas bed head unit made of high quality aluminum alloy material, surface finish is customized ( powder coating, electrophoresis, anodized ) 2. Medical bed head panel is beautiful appearance, wear-resistant, easy to clean. 3. Gas and strong and weak circuits are separated by dual channels, safe and reliable 4. Bed Head Unit can select the power outlet, flash light, call, intercom, gas terminal, etc. It can make the installation holes according to customers'requirement. 5. Bed head unit specification such as the color of panel and side panel is customized.

Minimum Order: 500

EZONG Double insulating glass window Desiccant adsorbs water vapor in hollow glass sandwich, it can prevent the glass have mist from the temperature difference between indoor and outdoor (The traditional single glass have the mist from the temperature different between indoor and outdoor), keep the glass cleaning and brighter, to sure the window’s transparent performance. It suit for cleanroom, hospital, pharmaceutical factory, laboratory, electronics factory, etc. https://www.yizhongalu.com/product-double- , insulating-glass-window.html Technical reference        Standard size(mm) 1180x1000 2363x1000 Standard thickness(mm) 50 75 100 My website:https://www.yizhongalu.com/ Hospital Double insulating glass window

Minimum Order: 500

Floor spring door used in hospital floor spring door detail This series of doors are specially designed for use in hospitals and public places. They are designed for structural use of arc transition, which effectively prevent impact, no dust, and easy to clean. High quality sealing rubber gasket are installed around door leaf. It has the advantages of good air tightness and anti-clamp.The panel is made of HPL which has the advantages of wear-resisting, moistureproof, anti-shock, flame-retardant, anti-bacterial, anti-fouling, rich in color, etc. It can effectively solve the problems of public places and hospitals that are prone to knock, touch and scrape, deformation and others. Floor spring door also apply to the areas that need to be cleaned and sealed as well as the kindergarten and hospital. EZONG free door Technical reference        Normal width of door hole(mm) Single door Double door 800,950 2000 Normal height of door hole(mm) 2100 Opening angle 0° ~180° https://www.yizhongalu.com/product-free- , door.html  Type option        Kind of choice Sandwich panel Handicraft panel Wall door Wall thickness(mm) 50,75,100 50 ≥ 100 The type of panel Colored GI panel,SUS panel,HPL,Aluminum panel The type of lock SUS handle Controlling type Floor spring

Minimum Order: 500

This series of airtight sliding door design is according to GMP design and safety requirements. It is a custom automatic door and design for hospital operating room, hospital ward area, kindergarten. Select high efficiency brushless DC motor with small size, large power, low noise and long life. High quality sealing gasket is inlaid around door leaf, close to door sleeve when closed, with good air tightness. Our website: EZONG Clean Room Doors Technical Reference        Normal width of door hole(mm) Single door Double door 1500 ≤ 3000 Normal height of door hole(mm) ≤2100 Door leaf opening angle ≤99% Motor system Joint venture system https://www.yizhongalu.com/product-medic , al-airtight-door.html Clean Room Panels Type Option        Kind of choice Sandwich panel Handicraft panel Wall door Wall thickness (mm) ≥ 50 ≥ 50 ≥ 50 The type of panel Colored GI panel、SUS panel、HPL、Aluminum panel The type of lock Hidden handle、SUS handle Controlling type Electric door system

Minimum Order: 500

Distributeur de graisse sur roues seau de 16kg / Pompe à graissage pour seau de 16Kg Hand Grease Bucket Pump - 16L Size:38 x 28 x 58cm Weight:6.75Kgs Material:Steel Thickness:2mm Working Pressure :4500PSI Max Pressure :12000PSI Hose Length:2.5m Surface:Powder Coat Packing:2 PC Net/Gross Weight:14/15Kgs Carton Size:57 x 39 x 59cm

Minimum Order: 100

Pistolet graisseur à levier / Pompe à graisse manuel avec embouts pour graisseurs Working Pressure: 4500Psi Max Pressure: 12000Psi Capacity: 400CC Packing: 10PCS/CTN Carton Size: 38.5 x 34.5 x 36.5CM

Minimum Order: 100

Ingrassatore manuale per grasso in barile / Pompa ingrassaggio a mano Hand Grease Bucket Pump - 5L Model:5L Size:30 x 23 x 45cm Weight:4.75Kgs Material:Steel Thickness:2mm Working Pressure :4500PSI Max Pressure :12000PSI Hose Length:2.5m Surface:Powder Coat Packing:2 PC Net/Gross Weight:9/10Kgs Carton Size:47 x 31 x 47cm ----------------------- Hand Grease Bucket Pump - 10L Size:38 x 28 x 48cm Weight:6Kgs Material:Steel < , br>Thickness:2mm Working Pressure :4500PSI Max Pressure :12000PSI Hose Length:2.5m Surface:Powder Coat Packing:2 PC Net/Gross Weight:12/13Kgs Carton Size:57 x 39 x 49cm ---------------------- Hand Grease Bucket Pump - 16L Size:38 x 28 x 58cm Weight:6.75Kgs Material:Steel Thickness:2mm Working Pressure :4500PSI Max Pressure :12000PSI Hose Length:2.5m Surface:Powder Coat Packing:2 PC Net/Gross Weight:14/15Kgs Carton Size:57 x 39 x 59cm

Minimum Order: 100