Offers to Sell

Overview LGT-100 in-situ gas analyzer is a flameproof in-situ probe-type tunable laser gas analyzer for industrial online analysis and environmental on-line monitoring, which can online analyze O2, CO, NH3, CO2, CH4, H2O, HCl, HF and other gases in various complex conditions (NOTE: A single analyzer can only analyze 1~2 components). Measuring concentration range from major to trace. Features Of LGT-100 Cross Stack & In-Situ Laser Gas Analyzer • Easy optical path adjusting, XY direction non-coupling adjusting. • Small drift, long maintenance period, drift ≤ 1%F.S./half year. • "Single line" spectrum technology, free from the interference of background gas. • Integrated structure design, high stability, and reliability. • Integrated flameproof structure, consuming less purge gas compared with positive-pressure mode. • In-situ measurement without a pretreatment system avoids adsorption, blockage, and damage reduces cost. Technical Parameter Of LGT-100 Cross Stack & In-Situ Laser Gas Analyzer Principle TDLAS Linearity Error ≤±1%F.S. Span Drift ≤±1% F.S./half year Zero Drift ≤±1% F.S./half year Calibration cycle 2 times/year Response Time ≤1s(T90) Explosion proof ExdIICT6 Gb Analog Output 2× 4-20mA output Analog Input    2× 4-20mA input Digital Communications RS485/RS232/GPRS Working Temp -20℃～+60℃ Purge Gas  0.3MPa ~ 0.8MPa N2, clean air Power supply 24VDC, <20W Certificates ATEX, IECEx, CE Application Of LGT-100 Cross Stack & In Situ Laser Gas Analyzer Apply to converter gas recovery gas analysis, CDQ circulating gas analysis; oxygen measuring electric fishing coke oven gas after analysis; pulverized coal injection gas analysis; ammonia escaping gas analysis in the cement industry; trace CO detection and analysis electricity, cement, environmental protection; HCl and HF trace analysis in environmental protection and chemical industry. HANGZHOU ZETIAN TECHNOLOGY CO., LTD has in situ gas analyzer,contact us now.

Minimum Order: 1 bags

Hygronom is also called moisture meter or dew-point meter, which is used to measure humidity of flue gas emitted by pollution source. According to measured humidity, it converts wet gas concentration into dry gas concentration. In addition, it also can be used in industrial online humidity monitoring. HM-100 flue gas hygronom is equipped with internal high-precision capacitance digital temperature & humidity sensor. The installation method adopts in-situ immersion installation. It is a self-developed product, of which, core component is from Switzerland. Put sensor inside stack to get in touch with flue gas. The probe needs preheating to prevent gas from condensation, which will affect measurement of moisture in flue gas. After gas contacts with measurement chip, the chip will change capacitance to measure flue gas concentration. HM-200 hygronom is an intelligent humidity/ oxygen transmitter, which employs microprocessor as the core, and frequency conversion icon oxygen sensor as measuring unit. The installation method adopts heat tracing pipeline installation. It is a self-developed product, of which, core component is from Switzerland. Under effect of air pump, the flue gas inside stack enters measurement module after heating from heat tracing probe. The whole process of extraction, measurement and discharge is with heat tracing to prevent gas from condensation, which will affect measurement of moisture in flue gas. The flue gas enters measurement module after heating and frequency conversion icon oxygen sensor will start to measure gas concentration. After measurement, the gas can get into analyzer for measurement of other components. High-temperaure hygronom is also called high-temperauture moisture meter or high-temperauture dew-point meter, which is used to measure humidity of flue gas emitted by pollution source. According to measured humidity, it converts wet gas concentration into dry gas concentration, widely applied in industrial online humidity monitoring. HM-300C heating tracing hygronom (resistance-capacitance) is a self-developed product, which employs microprocessor as the core, and imported high- temperaureresistance-capacitance temperature & humidity sensor as measuring unit, matched with multiple signal output methods including 4-20mA, RS232, RS485 and etc. The installation method adopts heat tracing pipeline installation. During sampling process of CMES, it measures humidity of flue gas and transmits the data to IPC through RS232. Our company provides water quality testing,online humidity meter,humidity test meter,humidity analyzer and small humidity meter,RFQ today.

Minimum Order: 1 bags

Overview Hygronom is used to measure the humidity of flue gas emitted by pollution sources. According to measured humidity, it converts wet gas concentration into dry gas concentration. In addition, it also can be used in industrial online humidity monitoring. HM-200 hygronom (online precision humidity meter) is an intelligent humidity/ oxygen transmitter, which employs microprocessor as the core, and frequency conversion icon oxygen sensor as a measuring unit. The installation method adopts a heat tracing pipeline installation. It is a self-developed product, of which, the core component is from Switzerland. Under the effect of the air pump, the flue gas inside the stack enters the measurement module after heating from the heat tracing probe. The whole process of extraction, measurement, and discharge is with heat tracing to prevent gas from condensation, which will affect the measurement of moisture in the flue gas. The flue gas enters the measurement module after heating and the frequency conversion icon oxygen sensor will start to measure gas concentration. After the measurement, the gas can get into an analyzer for the measurement of other components. Features Of HM-200 Hygronom Portable structure, easy to install and disassemble Able to measure the humidity of 300℃ flue gas Able to match with the large-scale system for measurement or independent measurement The probe is equipped with heat tracing function to prevent condensate water from damaging probe and affecting measuring value Imported core components with high-performance index and reliability Technical Parameter Of HM-200 Hygronom Measurement range O2: 0～25.00%, H2O: 0～40.00% (volume ratio ) Sensor Frequency conversion icon oxygen sensor (2) Accuracy 0～1%   O2:±1.5%F.S. 0～25%  O2:±1.5% of measured value 0～40.00%  H2O:±1%F.S. Stability 0～1%   O2:±1.5%F.S./7d 0～25%  O2:±1.5%/7d of measured value 0～40.00%  H2O:±1%F.S./7d Response time T90＜30s Sensor life ＞2 years (under normal use) Transmitter life ＞5 years (under normal use) Power supply 24VDC Instrument weight Net weight about 2.25kg  (include operation panel) Ambient temperature Transmitter: -10°C～+50°C Probe: 0～300℃  (except probe cable) Ambient humidity ＜85%RH Power consumption Maximum about 35VA (heating) Under normal working: 30～31W Sample gas flow （2～6）L/min Analog output (2 sets) Settable 4-20mA, 0-20mA, 0-1-5-10V, 1-5V Communication Rs485 (standard)/RS232 (optional) Application Of HM-200 Hygronom It can be widely applied in high-temperature (300℃) gas (such as desulfuration and denitration) humidity measurement of Continuous Emission Monitoring System (CEMS), humidity measurement and control in fields including wood, building material, papermaking, chemical industry, fiber, pharmacy, textile, tobacco, vegetable and food processing. We provide air quality monitor,humidity meter online and professional humidity meter,RFQ today.

Minimum Order: 1 bags

Overview Hygronom is also called gas moisture meter or dew-point meter, which is used to measure the humidity of flue gas emitted by pollution source. According to measured humidity, it converts wet gas concentration into dry gas concentration. In addition, it also can be used in industrial online humidity monitoring. HM-100 flue gas hygronom (high temperature gas analyzer) is equipped with an internal high-precision capacitance digital temperature & humidity sensor. The installation method adopts the in-situ immersion installation. It is a self- developed product, of which, the core component is from Switzerland. Put the sensor inside stack to get in touch with flue gas. The probe needs preheating to prevent gas from condensation, which will affect the measurement of moisture in the flue gas. After gas contacts with the measurement chip, the chip will change capacitance to measure flue gas concentration. Features Of HM-100 High-temperature Hygronom • The product is convenient for installation, disassembly, and cleaning with small and compact structure • Direct and simple key operation on site • The probe is equipped with heat tracing function to prevent condensate water from damaging humicap and thermal resistance • Imported core components with high-performance index and reliability Technical Parameter Of HM-100 High-temperature Hygronom Measurement Range H2O: 0~40.00%(volume percent)(optional) Humidity sensor Resistance-capacitance Temp sensor Pt100 platinum resistor Accuracy 0～40.00% H2O:±2% Repeatability 0～40.00% H2O:±1% Stability 0～40.00% H2O:±1%F.S./7d Response time T90＜6s Sensor life ＞2 years (under normal use) Transmitter life ＞5 years (under normal use) Power supply 220VAC Instrument weight About 10kg Power consumption Maximum about 35VA (heating) Ambient temperature Transmitter: -10°C～+55°C Probe: 0～180°C (except probe cable) Ambient humidity ＜95%RH Sample gas flow (2～6)L/min Analog output (2 sets) Temperature and humidity, 4-20mA Communication Rs232 (standard) Typical Application Of HM-100 High-temperature Hygronom 1.High-temperature humidity measurement in exhaust emission (CEMS) of fire coal and oil burning boiler 2.Humidity measurement in food processing 3.Humidity measurement in wood, building material, and papermaking industry 4.Humidity measurement in fields of chemical industry and fiber 5.Humidity measurement under high temperature of open width dyeing in dyeing & printing industry HANGZHOU ZETIAN TECHNOLOGY CO., LTD has gas moisture analyzer,welcome to order it.

Minimum Order: 1 bags

Overview Based on FTIR technology, FT-2000P portable FTIR gas analyzer can continuously monitor various kinds of components in the emission, such as SO2, NOx (NO, NO2), CH4, NH3, HCl, HF, CO, CO2, O2, H2O. According to actual measuring need, it can be extended to measure other components, like SO3, N2O,etc. This portable system mainly comprises FTIR analyzer and sampling probe. It has features of high measurement accuracy, wide dynamic range and low detection limit. Feature Of FT-2000P Portable FTIR Gas Analyzer Warming up is no required for the analyzer to realize fast measurement; Applicable for high humidity and dust occasion; Optical length up to 13m, extremely low detection limit, high range dynamics, satisfy the monitoring of small emission limit; By applying OLS and PLS techniques and selecting, interference from H2O or others can be effectively eliminated; Quick site sampling, analysis and easy operation. Application Of FT-2000P Portable FTIR Gas Analyzer Apply to dust and noise online monitoring in construction sites, roads, residential, factory sector, tourism, waste incineration plants and other construction sites and production situations. Specification Of FT-2000P Portable FTIR Gas Analyzer principle: fourier transform infrared spectroscopy (FTIR) Range： SO2: (0~75) mg/m3 NO: (0~200) mg/m3 NO2: (0~40) mg/m3 NOx: (0~200) mg/m3 CO: (0~75) mg/m3 H2O: (0~40) % CH4: (0~20) mg/m3 NH3: (0~10) mg/m3 HCl: (0~15) mg/m3 HF: (0~10) mg/m3 CO2: (0~20) mg/m3 Pretreatment Method: condensation dewatering/whole process high temperature (optional) Repeatability: ≤2% Zero Drift: ≤±2%F.S./24h Span Drift: ≤±2%F.S./24h Sampling Flow: (1.5±0.5) L/min Response Time: ≤90s (T90) Enclosure Protection: IP41 Working Temp.: 0~45℃ Working Pressure: 80kPa~106kPa Humidity: 0~95%RH Communication: RS232&USB We provide portable ftir analyzer and water quality testing,contact us now.

Minimum Order: 1 bags

Overview According to the status and characteristics of construction sites and production industry generated pollution, applying more sophisticated network cloud platform technology, the company has developed the digital EQMS-3000 remote continuous air monitoring system. The system can measure the air concentration of particulate matter (including: TSP, PM10, PM2.5), surrounding noise, and five meteorological parameters and other indicators online. It processes the monitoring data, and then upload the monitoring results to the server via GPRS / network, to realize multi-mode intelligent management of online monitoring and analysis and forecast. Feature Of EQMS-3000B Environmental Quality Monitoring System Supporting map accurate navigation and positioning, remote video surveillance; Automatic alarm to remind on-site staff timely to pay attention to the prevention and control; Smart contrast providing project and regional dynamic analysis; Joint prevention and control, open-sharing platform. Application Of EQMS-3000B Environmental Quality Monitoring System Apply to dust and noise online monitoring in construction sites, roads, residential, factory sector, tourism, waste incineration plants and other construction sites and production situations. Specification Of EQMS-3000B Environmental Quality Monitoring System Noise Range: 30dB~130dB (A) Noise Frequency: 20Hz~12.5kHz Noise Error: ± 0.5dB Particles Range: 0.001mg/m3~30mg/m3 Particles Resolution: 0.001mg/m3~30mg/m3 Wind Range: 0~45m/s Wind Accuracy: ± 0.3m/s Humidity Range: 0~100% RH Temp. Range: -50℃~+100℃ Camera Resolution: 1280 × 960 px Camera Enclosure Rating: IP65 Camera Angle: 360 ° without dead angle Output Interface: RS485 / Ethernet, 3G optional Working Temperature: -20℃~+50℃ We have online air monitoring system,continuous air quality monitoring systems,online pollution monitoring system,air pollution monitoring system and air quality monitor,contact us now.

Minimum Order: 1 bags

We are HGH, Anabolic Steroids, Peptides, Sarms Lab. We can offer high quality for Customers. Products: HGH Anavar Winstrol Dianabol Anadrol Testosterone Trenbolone Deca Sustanon TB-500 GH , RP-2 CJC-1295 Melanotan MK-677 RAD-140 , LGD-4033 GW-501516 Hot selling in UK . USA , AUS and other Europe Country. Samples available. High quality Guerantee shipping Wickr:chemhigh Email:ph , armaleo@163.com

Minimum Order: 10 long tons

304 Stainless Steel Electric Chemical Barrel Pump Voltage:220V Power:0.88KW Material:304 Stainless Steel Suction Tube:304 Stainless Steel Seal Material:Viton Vane Material:304 Stainless Steel Spout Material:304 Stainless Steel Inlet/Out Dia:50mm/25mm Tube Length:1000mm Output Flowing:110L/Min Suction/Lift:5m/7.5mm < , br>Speed:10000R/Min Fits on:15 - 55 Gallon Drums Applications:Acid,alkali,diesel,machi , ne oil,water, toluene,Uric acid Packing:2PCS/CTN N/G Weight:14/15KGS Carton Size:148 x 34 x 18cm

Minimum Order: 100

DN50 S60x6 x 3/4" Plastic Tap for IBC Tank Art No.:S60x6 x 3/4" Plastic Tap Tap:3/4" Adapter:2 to 3/4" Material:PP Packing:150PCS Gross Weight:10KGS Carton Size:45 x 31 x 37cm

Minimum Order: 100

S60x6 x 1/2" Brass Tap for IBC Tank Art No.:S60x6 x 1/2" Brass Tap Tap:1/2" Adapter:S60x6 to 1/2" Material:PP + Brass Packing:100PCS Gross Weight:24KGS Carton Size:45 x 31 x 37cm

Minimum Order: 100

Metalowy kran czerpalny 3/4" z plastikowa nakretka, zawór do zbiorników typu mauser 1000l IBC S60x6 x 3/4" Brass Tap for IBC Tank Art No.:S60x6 x 3/4" Brass Tap Tap:3/4" Adapter:S60x6 to 3/4" Material:PP + Brass Packing:100PCS Gross Weight:24.5KGS Carton Size:45 x 31 x 37cm

Minimum Order: 100

S60x6 x 3/4" Brass Tap for IBC Tank Art No.:S60x6 x 3/4" Brass Tap Tap:3/4" Adapter:S60x6 to 3/4" Material:PP + Brass Packing:100PCS Gross Weight:24.5KGS Carton Size:45 x 31 x 37cm

Minimum Order: 100

3M x 19mm Gravity Feed Delivery Hose and Nozzle Kit with IBC Adapter Manual Nozzle:Polypropylene (PP) SS Wire Hose Length:3M SS Wire Hose ID:19mm Adapter:IBC DIN 61 No electric pump required Exporting Packing:1PC/BOX,10PCS/CTN G/N Weight:15/13.2KGS Carton Size:70 x 35 x 60cm

Minimum Order: 100

Metalowy kran czerpalny 3/4" z dwoma zaworami i plastikowa nakretka do zbiornikow typu mauser 1000l IBC + przylacze S60x6 x 1/2" Double Brass Tap for IBC Tank Art No.:S60x6 x 1/2" Brass Tap Tap:1/2" Adapter:S60x6 to 1/2" Material:PP + Brass Packing:80PCS Gross Weight:25.5KGS Carton Size:45 x 31 x 37cm

Minimum Order: 100