Offers to Sell

The automotive air intake system is an important part of the car, it is an important part of the engine function, collecting air and directing it to the various cylinders. Main material: Grey cast iron/ cast steel/ aluminum alloy… We can manufacture all kinds of automobile air intake system parts according to your specified drawing.

Minimum Order: 1 bags

Sintering Pallets are of important parts of sintering machines. The pallets are consists of pallet body, roller cover, wheel, axle, side wall plates, side sealing plates of ignition furnace, grate bars, bolt insulating pieces, wearing plates etc. Jinggong Sintering Pallets are made of nodular cast iron or special steel, have the features of reasonable design, reliable performance and low energy consumption. The Sintering Pallets, as serial products for updated sintering machines, could meet needs of new made sintering machines, as well as current sintering machines with areas of 18m2, 24m2, 27 m2, 33m2, 36m2, 39 m2, 50m2, 75m2, 90m2, 105m2, 110m2, 130m2, 180m2, 265m2, 300m2, etc.

Minimum Order: 1 bags

Introduction of the main process of cast iron platform Design of the cast iron platform: According to the design drawings of GB/T7974- 1999 by our professional designers in accordance with your bidding documents, it will be used as the official processing drawing of the contract equipment after verification by both parties. cast iron platform Production process: The model is made of local high-quality resin sand, dry type is boxed, and the working surface is facing down to reduce steam holes and slag holes. The box is qualified, and there are only a few risers around the return water inlet. Ingredients: strictly in accordance with the gray cast iron standard: ISO185- 1988. The use of Handan 22# high-quality pig iron and low-carbon steel cuttings and various trace elements can meet the different requirements of customers for the required product materials. The molten iron discharge temperature is above 1480℃ (measured with a thermocouple thermometer). Take a small amount of molten iron cast triangle test piece. After the test piece is qualified, the casting temperature is above 1200℃. Boxing and sand cleaning are carried out at least 24 hours after casting. Aging treatment: Generally, artificial aging and tempering are used to remove internal stress. Tempering temperature is 530°C, constant temperature is 2-3 hours, more than 48 hours, the furnace temperature drops below 200°C, the furnace is cooled naturally, and then transferred to the next process. It is machine-added, and leaves the factory after passing the final inspection. Processing process and equipment: Casting: use resin sand lost foam, cupola smelting; take the amount of processing according to the actual situation; the shrinkage rate of the manufacturing casting process is 0.8%, and the anti-deformation amount is 3mm/m; Equipment required: 4mX8m drying kiln, 10T/n, 15T/n, cupola for smelting 10T, 5T, 8T. Hot metal ladle QI-2GAJF, carbon and sulfur combined tester, 100T universal tensile testing machine. For the first time, internal stress is removed, aging temperature is 550 degrees, and equipment required is 4mX8m annealing kiln. Roughing: marking and roughing leave a margin of 5mm. The second time to remove the internal stress is the same as the first time. Finishing: Machining the top and bottom, leaving a margin of 0.2-0.3mm. And processing the surrounding four sides to meet the requirements. Finally, the working surface is finished and chamfered.

Minimum Order: 1 bags

Jinggong Measuring Tools specializes in manufacture of all type of Sinter Pallet Cars in nodular cast iron or special steel. The pallets, as serial products for updated sinter machines, are suitable for requirements of new sintering machines as well as production demand of current sinter machines of various areas, have the features of high performance, durability and total lack of deflection in metal structures.

Minimum Order: 1 bags

Characteristics and methods of castings Casting is a forming method in which molten metal liquid is poured into a mold similar to the shape of the part, and after cooling and solidification, a blank or part with a certain shape and performance is obtained. 1. Casting and its characteristics Castings are generally blanks, which need to be cut before they can become parts. Parts with lower precision requirements and larger surface roughness parameter values, or castings produced by special casting methods can also be used directly. 2. There are many casting production methods, and there are two common types: a. Sand casting: a casting method in which molding sand is used to form compactly. The source of molding sand is wide, the price is low, and the sand casting method is adaptable, so it is the most basic casting method used in production at present. b. Special casting: other casting methods different from sand casting, such as investment casting, metal mold casting, pressure casting, low pressure casting and centrifugal casting. casting of cast iron plates 3. Casting production has the following advantages: a. Can be made into blanks with very complex shapes and cavities. Such as various boxes, beds, racks, etc. b. Wide application range. It can cast workpieces of different sizes, weights and shapes; it is also suitable for different materials, such as cast iron, cast steel, and non-ferrous alloys. The weight of castings can range from a few grams to more than 200 tons. c. Wide sources of raw materials. Scrap parts or chips can also be used; the cost of process equipment is small and the cost is low. d. The size of the obtained casting is close to that of the part. It can save metal consumption and reduce the workload of cutting. However, castings also have disadvantages such as poor mechanical properties, many production processes, unstable quality, and poor working conditions of workers. With the development of casting alloys and casting technology, especially the development of precision casting and the successful application of new casting alloys, the surface quality and mechanical properties of castings have been significantly improved, and the scope of application of castings has been expanding. Jinggong Measuring Tools Producing Co., Ltd is specializing in manufacturing and exporting all kinds of cast iron products，especially for cast iron floor plates, cast iron surface plates, cast iron clamping plates, cast iron angle plates, cast iron box table and other machine tool castings. Our engineering enables us to design the cast iron plates and tables according to DIN Standards, Indian Standards and Chinese Standards, machining by CNC machine tools and install in the world market.

Minimum Order: 1 bags

Jinggong Cast Iron Base plates / Bed Plates, are one of the modern industrial gauges. It is suitable for a variety of inspection, precision measurement of the reference plane. Used for mechanical testing benchmarks of machine tools, dimensional accuracy or shaped inspect parts for deviation, and as close crossed, is an indispensable basic tool in the machinery manufacturing. Cast Iron Base Plates is widely used in machining, tool shop, machine (the seizure) repair workshop, large equipment base, measuring rooms and precision machining of the inspection, measurement and grinding, and can accurately measure, test workpiece flatness, straightness and tolerance of the angle.

Minimum Order: 1 bags

Automobile stamping mold is an important process equipment for automobile manufacturing. It’s design and research time accounts for about 2/3 of the whole development cycle, which is one of the main constraints of automobile replacement. The automobile stamping molds has the features of large size, complicated working surface and high technical standard, which is a technology- intensive product in general. Main material: GG20(HT200),GG30(HT300) etc. The mold life is about 100,000-1,000,000 shots. We can manufacture all kinds of automobile stamping molds according to your specified drawing.

Minimum Order: 1 bags

High Opacity- Double Sided Copying, Sheet Size:210mm x 297mm, International Size A4 Quality: 100% Virgin Wood Pulp Whiteness = 102-104%,Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 152-170 Cobb Test: 27-33 g/m2 27-33

Minimum Order: 8000

Sheet Size : A4 (210mm x 297mm) Substance : 70gsm, 75gsm, 80gsm Brightness : 102-104% above Color : white Whiteness : CIE167 Grade : All purpose Premium Paper Sheet in Ream : 500 Roughness : 140ml/Min Thickness : 110um Opacity : 95% Ream box : 5 Ream Quality : Very High Imported 100% Virgin Wood Pulp Grading : A Thickness : 106cm. Perfect for high-quality printing and copying

Minimum Order: 8000

Sheet Size : A4 (210mm x 297mm) Substance : 70gsm, 75gsm, 80gsm Brightness : 102-104% above Color : white Whiteness : CIE167 Grade : All purpose Premium Paper Sheet in Ream : 500 Roughness : 140ml/Min Thickness : 110um Opacity : 95% Ream box : 5 Ream Quality : Very High Imported 100% Virgin Wood Pulp Grading : A Thickness : 106cm

Minimum Order: 8000

Advantages: 1.Material Selection: The inner vessels are crafted using modified polytetrafluoroethylene (TFM), PFA, and PTFE materials, ensuring superior chemical resistance and durability. This choice of materials guarantees a low background value and enhanced performance. 2.Purity and Cleanliness: The vessels are manufactured in a clean environment, without the addition of any recycled materials, ensuring a high level of purity. This results in more accurate and reliable experimental data. 3.Compatibility: These vessels are designed to be fully compatible with various manufacturers' microwave digestion instruments, including CEM models, ensuring seamless integration and operation. 4.Temperature Resistance: The TFM material used in the vessels exhibits excellent resistance to high and low temperatures, ranging from -200°C to +260°C, with a maximum tolerance of up to 300°C. This allows for safe and efficient operation under extreme conditions. 5.Deformation and Permeability Resistance: The TFM material offers improved resistance to deformation and permeation under high temperatures and pressures. This ensures the integrity of the vessel and prevents sample leakage or contamination. 6.Recovery and Durability: The vessels exhibit excellent recovery properties after exposure to high temperatures and pressures, ensuring their long-term durability and reliability. 7.Cost-Effectiveness: While offering comparable or superior performance to original equipment manufacturer vessels, the NJbinglab vessels are priced at a fraction of the cost, significantly reducing expenses for research and scientific institutions. 8.Specialized Production Process: The company employs specialized production processes that ensure a high level of smoothness and cleanliness of the vessel walls. This further enhances the accuracy and reproducibility of experimental results. 9.Customization Options: The company offers customization options, allowing customers to request vessels tailored to their specific needs and requirements. This flexibility ensures that the vessels meet the precise specifications of each application. In summary, the microwave digestion vessels from Nanjing Binzhenghong Instrument Co., Ltd. offer a combination of superior material properties, compatibility, durability, cost-effectiveness, and customization options that make them an excellent choice for scientific and research applications requiring high-performance microwave digestion vessels. web: https://www.njbinglab.com Phone/Whatsapp/ Wechat :+8615805176994 Mail: rossnjbzh@gmail.com / rossg@njbinglab.com

Minimum Order: 3 bushels

size: a4 weight: 80 gsm size: 210mm x 297mm, brightness: 102-104% wood pulp: 100% wood pulp color: white whiteness: cie167 capability: high speed copying100ppm, laser roughness: 140ml/min. surface roughness ts ml/min: 75-175 surface roughness bs ml/min: 100-200 bending stiffness md: 110 mn bending stiffness cd: >50 mn thickness : not lees than110 um density : 0,72 g/cm3 roughness : ws 200~400 ml/min roughness : fs 200~400 ml/min opacity: 95% not opacity : 86% cobb60 data : 30 g/m2 tensile md : 6.2 kg/15mm tensile cd : 2.5 kg/15 mm

Minimum Order: 8000

Sheet Size:210mm x 297mm, International Size A4 Quality: 100% Virgin Wood Pulp Whiteness = 102-104%,Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 170-172 Cobb Test: 27-33 g/m2 27-33 Grade paper : High grade

Minimum Order: 8000

Sheet Size : A4 (210mm x 297mm) Substance : 70gsm, 75gsm, 80gsm Brightness : 102-104% above Color : white Whiteness : CIE167 Grade : All purpose Premium Paper Sheet in Ream : 500 Roughness : 140ml/Min Thickness : 110um Opacity : 95% Ream box : 5 Ream Quality : Very High Imported 100% Virgin Wood Pulp Grading : A Thickness : 106cm. Moisture Control : Makes the sheets stay flat in the copier and enchances runability. Low Dust Content : Minimizing Your copier runing cost. Good Opacity : Double sided copying of the best quality. Smoothness : Improving Printing Quality. Bulky Sheet : Enhancing smooth runnability Best use with : Photocopier Laser Printer Fax Machine Ink-Jet Copier 2 Side Copying

Minimum Order: 8000