Offers to Sell

Our counter flow cooling towers are engineered to minimize pump head requirements and are less susceptible to icing in cold weather conditions, ensuring year-round efficiency and reliability. With a range of cell sizes and customizable components, frp cooling towers are tailored to meet the specific demands of various industries.   Types of counter flow cooling towers According to the noise level: ordinary type (P), low noise type (D), ultra-low noise type (C), industrial type (G) According to the structure of the tower, there are square towers and round cooling towers. Countercurrent cooling tower is the water in the tower filling, the water in the tower from top to bottom, the air in the tower from bottom to top, this is the counter current cooling tower.   Three stages of cooling tower: 1. The water distributor to the tower packing top, because the water temperature is relatively high, can continue to transfer heat to the air. 2. The filling water at the top of the counterflow cooling tower is exchanged with the hot gas at the bottom, commonly known as the countercurrent section. 3. When the filler reaches the bottom of the sump, the hot water will be cooled into cold water, and the counter flow type cooling tower is more efficient than the cross-flow cooling tower.   Advantages of counter flow cooling tower 1. The whole counter flow cooling tower design is simple, the water distribution system is smooth, the whole water distribution process does not need special requirements, and it is not easy to plug. Water filling is used to prevent aging and moisture reflux. In places where the temperature is relatively low, it is easy to take anti-freezing measures. And can design multiple cooling towers to be used at the same time.   2. The counter flow FRP cooling tower operation is relatively simple. The production cost of the entire equipment can be controlled, and it is usually used in some large cooling circulation water.   Counter flow cooling tower applications • Medical Plants: Our counterflow cooling towers for sale provide the precise temperature control needed for sensitive medical environments. • Nuclear Power Stations: Designed for the high safety and efficiency standards of nuclear facilities. • Chemical and Oil Refineries: Capable of handling the demanding conditions and impurities found in these industries. • Thermal Power Plants: Optimized for the heat transfer requirements of thermal power generation. • Small Factory Industries: Suitable for smaller operations where space and efficiency are critical. • Boiler Plants: Efficiently managing heat dissipation for boiler systems. • Furnace Plants: Supporting the cooling needs of high-temperature furnace operations.

Engineered to provide exceptional durability and high thermal efficiency in industrial cooling applications. These FRP cooling towers are crafted from pultruded fiberglass, a material known for its superior strength and resistance to harsh environments, making pultruded frp cooling tower a customizable and eco-friendly choice for various industries.   Pultruded frp cooling tower features • Exceptional Durability Pultruded cooling towers are built to withstand the test of time, with high resistance to corrosion, chemicals, UV radiation, and environmental factors, ensuring a longer operational lifespan and minimal maintenance. • Corrosion Resistance Unlike traditional cooling solutions prone to rust and wear, pultruded FRP towers are unaffected by corrosive elements, making them perfect for industries such as chemical processing and power generation. • Consistent Performance The inherent qualities of pultruded FRP ensure consistent cooling performance, crucial for maintaining uninterrupted industrial processes. • Wide Application Range Our pultruded frp cooling towers for sale are versatile, serving a broad spectrum of industries including manufacturing, power plants, chemical processing, steel, and sugar industries, among others.   Molded Cooling Tower Working principle After the dry (low enthalpy value) air is pumped by the fan, it enters the cooling tower from the inlet air network; The high temperature water molecules with high partial pressure of saturated steam flow to the air with low pressure, and the wet and hot water (high enthalpy value) is poured into the tower by the self-seeded water system. When water droplets and air contact, on the one hand due to the direct heat transfer of air and not, on the other hand due to the pressure difference between the surface of the water steam and the air, under the action of pressure to produce evaporation phenomenon, to the evaporation of latent heat, the heat in the water to take away the evaporation of heat transfer, so as to achieve the purpose of cooling tower.   Used in air conditioning cooling system, refrigeration series, injection molding, leather, foaming, power generation, steam turbine, aluminum processing equipment Design meteorological conditions of FRP molded cooling tower Atmospheric pressure: P =99.4×103 kPa Dry bulb temperature: θ =31.5℃ Wet bulb temperature: τ =28℃ (27℃ for square and ordinary type)   Tengxiao Cooling tower design parameters 1. Standard type: incoming tower water temperature 37℃, outgoing tower water temperature 32℃ 2. Medium temperature type: Entering the tower water temperature 43℃, out of the tower water temperature 33℃ 3. High temperature type: entering the tower water temperature of 60℃, out of the tower water temperature of 35℃ 4. Common type: the water temperature into the tower is 37℃, the water temperature out of the tower is 32℃ 5.Large tower: the water temperature into the tower is 42℃, the water temperature out of the tower is 32℃ in industry, a kind of equipment to cool hot water. Water is transported to the tower to make heat exchange between water and air, or heat and mass exchange, in order to achieve the purpose of reducing the water temperature.   Pultruded frp cooling tower applications The waste heat generated in industrial production or refrigeration process is generally guided away by cooling water. The role of FRP molded cooling tower is to carry out heat exchange between the cooling water with waste heat in the tower and the air, so that the waste heat is transmitted to the air and dispersed into the atmosphere. For example, in a thermal power plant, the boiler heats water into high temperature and high pressure steam, pushes the turbine to do work to make the generator generate electricity, and the waste steam after the steam turbine does work is discharged into the condenser, and the cooling water is exchanged to condense into water, and then the water is pumped back to the boiler for recycling. In this process, the waste heat of the lack of steam is transferred to the cooling water, which increases the temperature of the water, and the cooling water with the waste heat is transferred to the air in the cooling tower and discharged into the atmospheric environment from the wind duct.   Application range: Mainly used in air conditioning cooling system, freezing series, injection molding, leather, foaming, power generation, steam turbine, aluminum profile processing, air compressor, industrial water cooling and other fields, the most used for air conditioning cooling, freezing, plastic chemical industry.

Round countercurrent glass steel cooling tower, using the "bottle" shape design, the whole FRP cooling tower assembly is convenient, durable, light and delicate, cooling effect is good, made of high-quality glass steel, the surface gelcoat color contains light stabilizer, with anti-ultraviolet irradiation, uniform color, can maintain year-round do not fade, do not aging. Round cooling towers features: • Round cooling tower, using "bottle" shape design, minimal wind resistance. • The whole frp round cooling tower is easy to assemble, strong and durable, light and delicate, and has good cooling effect. • The circular countercurrent cooling tower body is made of high quality glass steel, and the surface gelcoat is made of imported raw materials. Its color contains light stabilizer, which is resistant to ultraviolet radiation, uniform and bright color, and can be maintained all year round without fading and aging. • The transmission parts adopt counter flow cooling tower special fan and motor. It has the characteristics of stable operation, reasonable matching, large air volume, low energy consumption and low noise. • The water distribution device is composed of fiberglass cloth water pipe, nylon water distribution device and cast copper inner core, which automatically rotates the water distribution through the water reaction force. The water distribution device has small pressure head loss, low water demand and uniform water distribution. • The packing has been tested by Shandong Thermal Engineering Institute, and has the characteristics of long life, high cooling efficiency, uniform water redistribution, small wind resistance, good hydrophilicity and high temperature resistance. • The steel component adopts advanced hot-dip galvanizing process and is coated with high-performance anticorrosive paint to ensure its service life.   Round cooling towers applications: Countercurrent cooling tower chassis can be used as a water collection tray, and equipped with manual water supply, automatic water supply, sewage, overflow and other devices, can be used as a closed cycle pool, no need to set up another pool. The silent series round cooling towers adopt a unique noise reduction technology, and the noise index is far lower than the specified value in the national standard. Circular counter flow cooling tower has good stability and strength, can withstand Richter magnitude 8 earthquake and 12 typhoon attack, round type cooling tower for sale is suitable for small and medium-sized water, multi-water dispersed arrangement of circulating cooling water system use, the arrangement is very flexible and convenient.   Company Service As a professional round cooling tower manufacturer, Tengxiao Environmental Protection Equipment is committed to providing not only high-quality products but also exceptional service. We offer: • Customized Solutions: Tailored to meet the specific requirements of your projects, ensuring optimal performance. • Quality Assurance: Rigorous quality control over every component to guarantee reliability and efficiency. • Cost-Effective Solutions: Delivering high-performance cooling towers at competitive prices, ensuring value for money. • After-Sales Support: Dedicated customer service and technical support to assist with any issues that may arise.

Product Name: Snow-melting Agent Characteristics: White Flake, Granular or Powder Solid Ingredients: Magnesium Chloride, Calcium Chloride, Sodium Chloride Applications: Snow melting agent not only has the function of melting snow, but also has the function of thawing and anti-freezing, which can effectively ensure normal transportation. Items Specifications Relative Snow-Ice Melting Efficiency ≥90 Corrosion rate of carbon steel mm/a ≤0.11 Attenuation rate of pavement friction ≤10 Hg ppm ≤1 Cd ppm ≤5 Cr ppm ≤15 Pb ppm ≤25 As ppm ≤5 Solid Moisture % ≤5 Water Insoluble % ≤5 Chloride （Cl-） % ≥1.0 Relative damage rate of plant seeds % ≤50 Freezing Point ℃ / PH 6.0-10.0 Storage Condition: Stored in cool, dry and well ventilated warehouse.Protect from sun, rain and moisture. Package: 50kgs, 1000kgs/bag or customized packaging

Minimum Order: 1 bags

Product Name: 2-octyl-4-isothiazolin-3-one (OIT-98) Molecular Formula: C11H19NOS Molecular Mass: 213.34 CAS No.: 26530-20-1 Application: It is suitable for mildew prevention in industrial oils, plastics, building materials, leather, paints and coatings, and textiles and dyeing. It can also be widely used in interior and exterior wall latex paints, wood products, and the preservation of cultural relics. Items pecifications Appearance Yellow transparent viscous liquid or crystals Active Ingredient (%) ≥98 Moisture % ≤1.0 Density (20℃，g/ml) 1.03-1.05 PH (1% aqueous solution) 4.0-7.0 Packaging: 25 kg/200 kg plastic drum packaging. Storage conditions: Store at room temperature, away from light, and in a tightly sealed container.

Minimum Order: 1 bags

Product Name: 2-methyl-4-isothiazolin-3-one (MIT-50) Molecular Formula: C4H5NOS Molecular Mass: 115.16 CAS号 CAS No.: 2682-20-4 Application: MIT is a highly efficient, heat-resistant, water-based broad- spectrum biocide and preservative, capable of effectively killing algae, bacteria, and fungi. This active agent can be widely used in industrial cooling water, oil field reinjection water, the paper industry, coatings, paints, rubber, as well as in cosmetics, photographic film, and cleaning products. Items Specifications Appearance Yellow transparent solution Active Ingredient (%) ≥50 PH (1% aqueous solution) 5.0-7.0 Density (20℃，g/ml) ≥1.10 Our factory can customize 10%, 20%, and 70% solutions according to customer requirement. Packaging: 25 kg/200 kg/1000 kg plastic drum packaging. Storage conditions: Store at room temperature, away from light, and in a tightly sealed container.

Minimum Order: 1 bags

Product Name: 4,5-dichloro-2-octyl-4-isothiazolin-3-one (DCOIT-97) Molecular Formula: C11H17NOSCl2 Molecular Mass: 282.2 CAS No.: 64359-81-5 Application: A broad-spectrum dry film fungicide, it is mainly used for anti- corrosion, anti-mold, and antialgae purposes in plastics, leather, paints, coatings, sewage treatment, papermaking, wood, textiles, printing and dyeing, and marine antifouling. It can also be used in adhesives and inks. Items Specifications Appearance White or yellowish-white powder, yellowish-white waxy substance. Active Ingredient(%) ≥97.0 Our factory can customize 10%, 20%, and 30% solutions according to customer requirement. Packaging: 25 kg/200 kg/1000 kg plastic drum packaging. Storage conditions: Store at room temperature, away from light, and in a tightly sealed container.

Minimum Order: 1 bags

Product Name: 5-Chloro-2-methyl-4-isothiazolin-3-one/ 2-methy , l-4-isothiazolin-3-one 14% (CMIT/MIT-14) Molecular Formula: C4H4NOSCl/C4H5NOS Molecular Mass: 149.60/115.16 CAS号 CAS No.: 26172-55-4/2682-20-4 Widely used in water treatment, such as in petrochemicals, metallurgy, power generation, central air conditioning, and industrial circulating cooling water for sterilization and algae elimination, effectively inhibiting the proliferation and growth of microorganisms. It can also be used in coatings, water-based polymers, metal cutting fluids, adhesives, inks, dyes, and paraffin solutions. Items Specifications Appearance Yellow or yellow-green transparent solution CMIT+MIT% 14.0-15.0 Chlorine Ratio 2.5-3.4 PH (Primary liquid) 2.0-4.0 Density (20℃, g/ml) 1.26-1.32 The factory can customize solutions of 1.0%, 1.5%, 2.0%, 2.5%, 3.0%, and 10% according to customer requirements. Packing: 25 kg, 250 kg, 1000 kg, and 1250 kg plastic drum packaging. Storage conditions: Keep at room temperature, away from light, and in a sealed container.

Gift your love ones velvet slippers : 75$ Velvet slippers make a lovely gift! They’re luxurious and cozy, perfect for lounging at home. Plus, they add a touch of elegance to any outfit. If you know the size and style preferences, they can be a thoughtful and stylish present. Just be sure to choose a color or pattern that suits their taste!

The gold satin enhances the overall luxurious look, complementing the rich texture of velvet slippers. This pairing creates an elegant and high-end appearance.

Luxury at Your Feet, Handcrafted for You Slip into Velvet Bliss

FG velvet loafers is made from high quality rayon and silk mixed synthetic non disperse fabric which helps reduce friction and lowers the chances of blisters and or irritation of the skin.

Minimum Order: 1 bags

FG velvet loafers is made from high quality rayon and silk mixed synthetic non disperse fabric which helps reduce friction and lowers the chances of blisters and or irritation of the skin.

Minimum Order: 1 bags

FG velvet loafers is made from high quality rayon and silk mixed synthetic non disperse fabric which helps reduce friction and lowers the chances of blisters and or irritation of the skin.

Minimum Order: 1 bags