Offers to Sell

What is the FEATURES of our GPS tracker? Single Locating Auto track continuously Track with limited times upon time interval Track with unlimited times upon time interval Smart track upon time and distance interval Automatic update positions of vehicle turns GPS drift suppression Absolute street address by SMS Location based service (LBS) Forward the third parties’ message Charges Inquiry Low battery alarm Power off alarm GPS blind Spot alert SOS (FOR 311B and 311C) Geo-fence Movement alarm Over speed alarm ACC working alarm engine stop 3-aixs accelaration sensor ACC alarm Silent Mode Alarm without GSM network service Sleep Mode Terminal (local) Time Setting TCP/UDP switch Configure parameters by USB Modes Switch between SMS and GPRS Set up monitor center number

Minimum Order: 100

What is the FEATURES of our GPS tracker? Single Locating Auto track continuously Track with limited times upon time interval Track with unlimited times upon time interval Smart track upon time and distance interval Automatic update positions of vehicle turns GPS drift suppression Absolute street address by SMS Location based service (LBS) Forward the third parties’ message Charges Inquiry Low battery alarm Power off alarm GPS blind Spot alert SOS (FOR 311B and 311C) Geo-fence Movement alarm Over speed alarm ACC working alarm engine stop 3-aixs accelaration sensor ACC alarm Silent Mode Alarm without GSM network service Sleep Mode Terminal (local) Time Setting TCP/UDP switch Configure parameters by USB Modes Switch between SMS and GPRS Set up monitor center number

Minimum Order: 100

What is the FEATURES of our GPS tracker? Single Locating Auto track continuously Track with limited times upon time interval Track with unlimited times upon time interval Smart track upon time and distance interval Automatic update positions of vehicle turns GPS drift suppression Absolute street address by SMS Location based service (LBS) Monitor Data logging Data Load Forward the third parties’ message Charges Inquiry Low battery alarm Power off alarm GPS blind Spot alert SOS Geo-fence Multi-area management Movement alarm Over speed alarm Accident alarm (Option) ACC working alarm Fuel alarm Cut off the Oil and Power System Arm Disarm Alarms under Arm State Door alarm 3-aixs accelaration sensor ACC alarm Silent Mode Alarm without GSM network service Check the Vehicle State Reset Hardware Sleep Mode Terminal (local) Time Setting TCP/UDP switch Configure parameters by USB GPRS Setting Less GPRS traffic Modes Switch between SMS and GPRS Set up monitor center number

Minimum Order: 100

This high and low pressure film blowing unit is suitable for the production of high density polyethylene (HDPE), low density polyethylene (LDPE) plastic film, widely used in food, clothing, textiles, daily necessities and other civilian products and industrial products packaging. FEATURES FEATURES OF HDPE/LDPE/PLA monolayer blown film MACHINE The screw and material cylinder are made of 38crmoal alloy steel, through nitriding treatment and precision processing, high hardness, strong sex, durable. The mold head plating hard chromium, its structure is screw mandrel type, the extruded melting material is uniform, the production of the film finish is good, the air cooling device structure is maze, uniform air outlet. The winding device adopts friction or central winding, and the torque motor is used to adjust the roll leveling, and convenient roll replacement. As a plastic packaging machine manufacturer, we provide monolayer blown film plant, monolayer film plant, monolayer blown film extrusion machine, monolayer extruder machine, etc. For monolayer blown film plant price or more, contact us.

Minimum Order: 1 bags

Adaferin Gel is a medicinal solution prescribed for individuals with mild to moderate acne concerns. This effective treatment aids in thwarting the emergence of small pimples, blackheads, and whiteheads on the skin. By regulating oil production and unclogging pores, it curtails inflammation while promoting a clearer complexion. Specifications of Adaferin 30gm Adapalene Gel Brand Name : Adaferin Composition : Adapalene 0.1% w/w Manufactured by : Galderma India Pvt Ltd. Form : Gel Packing : Pack of 1 Tube Country Of Origin : India If you're looking for high-quality medicines at great prices, check out Oddway International. We sell Adaferin 30gm Adapalene Gel and other top-notch acne creams, medicines, gels and . Get in touch with us at sales@oddwayinternational.com or call +91-9873336444. We're your trusted source for excellent medicines worldwide.

Minimum Order: 1 bags

LVD-100KG/LVD-100KG-6D Electrodynamic Vibration Generator Test Table is according to IEC 60068, IEC68-2-6, JJG189-97, GB/T13309-91, GB2423 and other relevant standards. • LVD-100KG: Combined the Vertical and Longitudinal total 4 directions in one test table. • LVD-100KG-6D: Combined the Vertical, Level and Longitudinal total 6 directions in one test table. Measurements: Sine Wave, Frequency Modulation, Sweep Frequency, Programmable, Frequency Doubling, Logarithm, High Acceleration speed, Amplitude Modulation, Time Control, Full-function Computer Control, simple and easy to set the acceleration and amplitude. Specifications: • Vibration table size: 500*500mm (Other size can be designed) • Vibration: 0~5mm (Adjustable range P-P). Vibration waveform: sine wave (half wave and full wave). Acceleration speed: 0~20g (Adjustable) • Maximum test load capacity: 100kg • Accuracy: Frequency can be displayed to 0.01 Hz. Precision: 0.1 Hz. • Sweep frequency function (1~600Hz): (Upper frequency, Lower frequency, Time range) It can set real standard arbitrarily to sweep frequency back and forth • Programmable Function (1~600Hz): It can set 15 segments in one test with different parameters (frequency/amplitude/time/acceleration), and it can be recycled • Frequency doubling function (1~600Hz): 15 segments multiplied-increase: 1)Low to high frequency 2)High to low frequency 3)Low to high and then to low frequency, it can be recycled • Logarithmic function (1~600Hz), 3 modes of logarithm/can be recycled: 1)Lower to upper frequency 2)Upper to lower frequency 3)Lower to upper and then to lower frequency • Measuring instrument: To display amplitude, acceleration speed and the maximum acceleration speed Why do we measure vibration? Vibration test is to simulate the various vibration environment impacts encountered by the product in the transportation, installation. This test is to simulate the various impacts encountered by the product in the transportation, installation and use environment. This kind of vibration environmental impact is used to determine whether the product can withstand various environmental vibrations.

Minimum Order: 1 bags

Product Description LS2090 LED Power Driver Test Instrument is the comprehensive test instrument for LED driver power which is according to GB/T 24825-2009 and IEC 62384:2006. It can measure the following parameters: input (AC&DC), output (AC&DC), output start (DC), Harmonic and Displacement Factor (DF). The LS2090 usually works with LISUN LSP-500VARC pure sine AC Power Source and LISUN M9822 DC Electronic Load. The LSP 500VARC provides constant adjustable voltage for the driver under test, and the M9822 is used to simulate the LED source. The software can run on Win7, Win8 and Win10, Win11. Specification: 1. Input Characteristics Test (AC) • Measures the input voltage, current, power, power factor, power grid frequency • The fundamental frequency scope of the current and voltage: 45Hz~65Hz; Narrowband range: 45Hz~5kHz; Broadband range: 45Hz~1MHz. • Voltage range: 3~300 V (CF=1.67); Current range: 5mA ~ 2.7A (CF=3); Power range: 0.015~800W; Power factor range: 0.000~1.000. 2. Input Characteristics Test (DC) • Measures voltage, current, power. • Voltage range: 3~500V; Current range: 5mA~8A; Power range: 0.015~4000W 3. Output Characteristics Test (AC) • Measures lamp voltage, lamp current, lamp power. • Lamp voltage range: 3~300V (CF=3); Lamp current range: 5mA~2.7A(CF=3); Lamp power range: 0.015~800W 4. Output Characteristics Test (DC) • Measures output lamp voltage, lamp current, lamp power, ripple wave current. • Voltage range: 3~500V; Current range: 5mA~8A; Power range: 0.015~4KW; Ripple wave current range: 5mA~2.5A. 5. Output Start Characteristics Test (DC) • Changing curve and data of the lamp voltage and lamp current within 0~2 seconds. • Lamp voltage range: 3~500V; Lamp current range: 5mA~8A 6. Harmonic Testing Total harmonic and the harmonic component of 0~50 times, wave ratio, initial phase angle, peak phase angle and the phase Angle. 7. Displacement Factor (DF) Testing The LS2090 is an update version for WT2080, the LS2090 has the Displacement Factor (DF) Testing function. P.S. The LS2090-IEC with additional software (need to add extra cost on LS2090) to fully meet EN/IEC6100-3-2:2019, please click here to see the LS2090-IEC additional Test Report Sample

Minimum Order: 1 bags

ESD simulator guns (Electrostatic Discharge Generator/Electrostatic Gun/ESD Guns) is in full compliance with IEC 61000-4-2, EN61000-4-2, ISO10605, GB/T17626.2, GB/T17215.301 and GB/T17215.322. What is a ESD test? The static electricity generated by the human body to the object or between two objects may cause the electrical and electronic equipment circuits to malfunction or even be damaged. The ESD generator is designed for the withstanding ESD performance measurement for the assessment of electrical and electronic equipment. ESD61000-2/ESD61000-2A has a LCD touch screen in both English and Chinese. What is an esd simulator gun used for? Electrostatic discharge simulator is highest electrostatic voltage can be up to 30 kv, which is enough to cover the most severe standard grade of electrostatic voltage requirement (the voltage requirements of the grade 4 air discharge electrostatic is 15 KV). The ESD test gun can be used for the most of electrical and electronic equipment for electrostatic discharge test, and also can ensure comparability and reproducibility of test.

Minimum Order: 1 bags

The LS9955/LS9956 Automatic Safety Test System (electrical safety analyzer) combined the following function in one set: Withstand Voltage Test (AC/DC), Insulation Resistance Test (IR), Leakage Current Test (LLC), Grounding Resistance Test (GR) and Power Test. The LS9955/LS9956 Automatic Safety Test System is according to GB4706.1, IEC/EN60335-1, UL60335, GB7000, IEC60598, GB4943, IEC60950 and GB9706.1. It is used for luminaries, home application and motor tools safety test in production line or R&D Lab. Specification: • Remote control device and can control by software (Optional) • Display all setting parameters and testing results in the same big LCD menu • PASS/FAIL limit values can be set. It has alarm sound and indicator light • Test mode programmable; 50 groups setting available, 8 test steps per group • Quick discharge. Support 50Hz and 60Hz frequency; Electric safety wall detecting feature • The LS9955 can do test for Withstand Voltage (AC/DC), Insulation Resistance (IR), Leakage Current (LLC) and Ground Resistance (GR) • The LS9956 can test for Withstand Voltage (AC/DC), Insulation Resistance (IR), Leakage Current (LLC), Ground Resistance (GR) and Power. What's the test method of Automatic Electrical Safety System? Pls. note that the DC high voltage output is a negative voltage, and the ground is a positive. When testing capacitance, there is a charging process when voltage is applied to both ends of the capacitor. At this time, there is a charging current in the test circuit. When the current is greater than the set leakage current value, the withstand voltage tester will alarm to interrupt the test , it cannot be proceed. Therefore, when the safety tester is testing, the voltage should be increased slowly, and the charging current should be less than the set leakage current value until the test voltage is specified, and the test should be performed. It is not possible to use a fixed voltage, reset- start method for testing. In the AC circuit, it is equivalent to the resistance in the DC circuit. […more…]

Minimum Order: 1 bags

Temperature Humidity Chamber Thermal Chamber Climate Chamber is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-78, IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber is used to test the CFL/LED which meets IES LM-80-08, electricity products, automative cars, home appications and mobiles. What is Climate Chamber? Climate chambers is used to simulate a temperature enviromental condistions, it may also be called environmental chambers or Thermal Chamber or Temperature Chamber Specifications: •The temperature humidity test chamber is made of SUS304 Steel. The thermal insulation layer is made of polyurethane hard foam ultra-fine glass fiber. The heat-insulated doorframe uses high temperature aging silicone rubber sealing strip. •The temperature controller of the climate chamber includes Korean TEMI display in English/Chinese and German Siemens PLC. It can communicate with PC via RS- 232. The temperature accuracy is 0.1ºC and humidity accuracy is 0.1%R.H •The temperature sensor is platinum PT100Ω/MV •The independant heating system uses nickel-chrome electric heater •The refrigerating system is fully enclosed air-cooled single-stage compression refrigeration mode, and the compressor is from France TECUMSEH brand which can allow you get after sales support from many other countries •The circulation system uses temperature resistant and low noise air- conditioned motor and multi-blade centrifugal wind wheel •The safety protection system includes electric leakage, short circuit, over temperature, motor overheating, compressor pressure, overload, over-current protection •Working Voltage: AC380V±10% 3phases and frequency 50Hz/60Hz •Working Environmental: Temperature is 5ºC~+30ºC Humidity ≤85%R.H How does an environmental chamber work? The temperature and humidity environmental chamber can simulate a variety of temperature and humidity natural environments, and is suitable for testing electronic devices, household appliances, food, trolleys, vulcanized rubber, plastic rubber, metal materials and other commodities. The whole process of humidification of the temperature and humidity environmental chamber is to increase the working pressure of water vapor. The more initial way is to spray water on the test box wall to control the saturation pressure of the water surface according to the operating temperature. What's Temperature Chamber quality difference between LISUN and other brands in China Market? 1. LISUN low temperature such as -60ºC warranty under a 200W lamps with heating but other brands under empty conditions. 2. LISUN adopts with Finland brand electronic humidity sensor which no need to maintenence. But our competitor used dry ball device which is easy dry to cause problems after used 3-6months. 3. LISUN equipped a water purification device, customer can use a water pipe connect it to provide water supply directly, our competitor but need to add the water by hand. 4. LISUN temperature chamber key electrical connector parts adopted with famous brand AC contactor and solid state relays from Omron brands. It is easy for you to find in your local market if they were failed, but our competitors used them with almost Chinese local brands.

Minimum Order: 1 bags

Print-Rite's compatible copier cartridges provide a cost-effective alternative to OEM products, toner cartridge compatible ensuring exceptional print quality and reliability. toner refill from wholesale toner cartridges manufacturers are engineered to meet or exceed OEM performance standards, we offer consistent and long-lasting results for customers with ribbon cartridge. Why Choose Print-Rite Copier Toner Cartridge Compatible Print Rite provides IP safe and innovative toner refill and ribbon cartridges with outstanding customer satisfaction to ensure your "high-quality" experience. Print-Rite is a leading provider of cutting-edge toner refill and ribbon cartridges, mono copier cartridge, color printer cartridge and copier drum, committed to delivering innovative solutions while placing the utmost emphasis on the protection of intellectual property. With a passion for excellence, we strive to exceed customer expectations by offering high-quality products that cater to the diverse needs of the modern printing industry. At Print-Rite, we understand that safeguarding intellectual property is not just a legal obligation but a moral responsibility. Therefore, our research and development teams work tirelessly to create original, patented technologies that set us apart from competitors. By investing in groundbreaking advancements, we ensure that our products not only adhere to international copyright laws but also set new industry standards, revolutionizing the way businesses print and engage with documents. Our dedication to innovation extends beyond intellectual property protection. We take pride in pioneering eco-friendly solutions, reducing the environmental impact of printing without compromising on quality. Through sustainable practices and recyclable materials, we aim to create a greener planet for generations to come. At the core of our business philosophy lies a deep commitment to customer satisfaction. We recognize that modern businesses demand efficient, reliable, and cost-effective printing solutions. Hence, our top-notch products undergo rigorous testing and quality control measures to ensure optimal performance and longevity. We want our customers to experience unparalleled ease and convenience when using our products, knowing they can rely on Print-Rite for consistent, top-tier results. Our customer-centric approach extends to our attentive and knowledgeable support team, always ready to assist with any inquiries or troubleshooting needs. We believe that excellent customer service is essential for building long-lasting relationships and fostering loyalty. In addition to catering to businesses of all sizes, Print-Rite also collaborates with original equipment manufacturers (OEMs), enabling seamless integration of our products into a wide range of printing devices. This collaboration ensures that customers can enjoy our cutting-edge solutions without any compatibility issues, preserving the integrity of their printing infrastructure. Print-Rite is a printing consumables company driven by innovation, integrity, and customer satisfaction. Our mission is to be at the forefront of the printing industry, providing state-of-the-art products that respect intellectual property rights while offering superior performance. We envision a world where businesses can print with confidence, knowing they have the best- in-class printing solutions from Print-Rite. With unwavering dedication to excellence, we continue to shape the future of printing technology, delivering products that make a difference. Print-Rite Compatible Toner Cartridge Installation Step 1: Open the copier machine Locate the area where the old printer refill toner cartridge is housed and open the copier machine. Depending on the model of the copier, this may involve lifting a lid or sliding out a tray. Step 2: Remove the old printer cartridge toner Carefully remove the old printer cartridge toner refill by pulling it out of its slot. Make sure to dispose of it properly, according to any local recycling guidelines. Step 3: Insert the new printer refill toner cartridge Remove the new printer refill toner cartridge from its packaging and gently shake it to distribute the toner evenly. Then, slide it into the slot where the old printer compatible toner cartridge was removed from. Make sure printing compatible cartridge clicks into place. Step 4: Close the copier machine Close the copier machine, making sure that all of the components are securely in place. The machine should automatically recognize the new print cartridge refill and be ready to use. If there are any error messages, consult the copier's manual or contact a professional for assistance. Want to buy toner cartridges or know premium toner cartridge price.

Minimum Order: 500

Color printer cartridge is a cartridge designed for use in color copiers and printers. It is a consumable item that contains the inks and toner needed to produce a colored output from a color copier. Color toner cartridge are available in standard, high-capacity, and extra-high-capacity sizes. Colour ink for printer are designed to provide superior color reproduction and performance, and are an essential part of any color copier or printer setup. Spectacular Colors of Print-Rite color ink cartridges It is a revolutionary product that offers unbeatable performance and exceptional print quality. It is designed to provide vibrant, professional- looking prints with a low cost of ownership. Print-Rite color printer toner was designed to meet the needs of businesses and home users who need to make their documents stand out with bright, vivid colors. Print-Rite Color Copier Cartridge is the ideal choice for anyone who needs reliable performance and great print quality with toner cartridge compatible. Persistence of Print-Rite Color Copier Cartridge The persistence of the Print-Rite Color Copier Cartridge has been a testament to its reliability and durability. This cartridge has been in production since the mid-1980s and is still one of the best-selling color copier cartridges on the market. This cartridge is known for its exceptional print quality and easy install process. It is also compatible with a wide range of printers, making it a great choice for businesses and individuals alike. With its long-lasting design and high-quality performance, it is no wonder that the Print-Rite Color Copier Cartridge has become a staple in the printing industry. For more information about printer consumables, please feel free to contact us!

Minimum Order: 500

Color Cartridge is a laser cartridge that delivers superior image quality and color accuracy for printing documents, photos, and graphics. It is a perfect choice for those who want great-looking prints and need accurate color representation. This cartridge is suitable for home and office use and provides an economical way to print out office documents and personal photos. Spectacular Colors of Print-Rite Color Cartridge Print-Rite Color Cartridge offers spectacular colors with its vibrant and bold tones. The colors are vibrant, rich and eye-catching, giving your documents a professional look. Whether you are printing documents for business purposes or for personal use, the colors provided by Print-Rite compatible laser toner cartridges will make your documents stand out from the crowd. The colors are consistent and provide high-quality results, allowing you to have confidence in your documents. The colors are also fade and smudge resistant, making them perfect for long-term use. Persistence of Print-Rite Color Cartridge The Print Rite Color Cartridge is a premium quality, long-lasting printer ink cartridge, designed for reliable performance and superior results. It is compatible with most popular printers and offers a wide range of colors for all your printing needs. The cartridge has a high-capacity print capacity, allowing you to produce more prints with fewer refills. It is engineered with a special ink formula to provide long-lasting results and superior color clarity. The cartridge also features high-efficiency, low-cost printing, along with a special ink-drying technology which ensures that your prints last longer without fading or smudging. The Print-Rite Color Cartridge is an ideal choice for all your printing needs, offering you superior quality, reliability and affordability.

Minimum Order: 500

The compatible chip is a versatile and powerful tool used in the gaming industry. It is a form of hardware that is inserted into a gaming system or console which contains the game data and instructions. This chip is a popular choice for developers as it is easy to integrate with existing systems and is also highly cost-effective. The Cartridge Chip is an essential component of the gaming industry and its importance is only growing as more developers create and release innovative and immersive games. Benefits of Print-Rite Cartridge Chip 1. Improved Print Quality: Print-Rite Cartridge Chip offers improved print quality, enabling users to produce sharper images, clearer text, and more vibrant colors. 2. Increased Cost Savings: Print-Rite Cartridge Chip helps reduce printing costs by reducing the number of empty or spent cartridges that need to be replaced. This helps businesses and consumers save money. 3. Longer Cartridge Life: The chip helps cartridges last longer by tracking ink levels and alerting users when ink levels are low. This can help reduce the number of cartridges that need to be replaced. 4. Improved Printing Experience: Print-Rite Cartridge Chip makes printer maintenance easier and more efficient, ensuring that users always have a reliable printing experience. What is a toner chip's function? A toner chip is a small electronic device that helps to manage the toner that is used in laser printers. It monitors the amount of toner used and helps to ensure that the printer is using an optimal amount of toner. The chip also helps the printer to accurately measure the amount of toner that is used, so that the printer can provide the user with accurate information about the amount of toner that has been used. This helps to ensure that the user does not waste toner unnecessarily. The chip also helps to ensure that the printer is using the correct type of toner for the specific printer model. This helps to make sure that the quality of the printouts is consistent and that the printer is operating at the highest level of efficiency. For more information about waste toner bottle, please feel free to contact us!

Minimum Order: 500