Offers to Sell

Wire buckles are designed to be used WITH strap AND LASHES, and they work by clamping the strapping between the two prongs of the buckle, creating tension and holding the strapping securely in place. They are easy to use and can be quickly tightened or loosened to adjust the tension of the strapping.

Minimum Order: 5000

Description: The right-angle drill is primarily designed to fit into tight spaces that a regular drill could not be applied. The angle allows for a smaller head and shorter extension of the handle, so that corners can be drilled from the inside. This is also true of any space that is not long enough to handle a traditional drill. Specification: 1. Free Speed:3000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:540L/min 5. Net Weight:895g 6. Tool Length:240mm 7. Collet Size: 6mm (1/4") 8. Locking Cap: 5/16X24T (1/4x28T,M6x1.0,1/4x20T) 9. Packing:10pcs/10kg/11kg/0.53'

Description: 60mmx260mm Miniaturized, lightweight and 1.3 kgs only. Handle angle can adjusting range reach 180. Adjustable guide shaft. Handle rear can be connected with muffle tube and protect work piece surface will not be oil pollution. Suitable for Wooden furniture, plastics, glass, metalwork , desk, chair, bed and cell Phone Housing, etc. From grind to the surface polishing all can application. Rid of surface scar and deckle edge. Stainless steel surface tiny mark processed. Specification: 1. Free Speed:17000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:650L/min 5. Net Weight:1300g 6. Tool Length:1900mm 7. Exhaust System: Rear 8. Packing:10pcs/15kg/16kg/2.3'

Rubber sleeve keeps hands from getting cold or slip Don't use polishing pads bigger than 125 mm (5"). There is easy to cause damage to the tool. Front thumb-adjustable water knob enhances the tool control. No visible water tube and screw make a seamless smooth touch and no more break risk when dropping. Cast from aircraft aluminum. The watertight sealed bearings provide long life and smooth rotational speeds. The water and air controls are simple to use and conveniently located. Rear air vent removes exhaust through a hose protector, away from operator's hands. The tool is a powerful, reliable air tool ideally suited for continuous wet polishing in stone industry, and is safer when used wet! Detachable rotor and gear design brings you an economical repair Specification: 1. Free Speed:4500 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:660L/min 5. Net Weight:1220g 6. Tool Length:235mm 7. Exhaust System:Front 8. Packing:10pcs/21kg/22kg/1.38'

Description: There is omnipotent hold fast. It's easy to clip firmly in various of thickness on process tools of plane surface. It can purge hardened surface of metal that made from discharge electricity quickly. Long life, high speed, light weight and trouble free. to the processing of footwear, mold and woodworking industries Specification: 1. Strokes Per Minute:3400 spm 2. File Shake Dia:5mm 3. Stroke Length:5mm 4. Air Inlet:1/4" 5. Air Pressure:6kg/cm2 6. Air Consumption:150L/min 7. Net Weight:580g 8. Tool Length:700mm 9. Packing:10pcs/8kg/9kg/1.2'

Description: Flux Chipper it's powerful for exerting and chisel is suitable to dismantle. It's was designed specially to use for a long time. And suitable for boat, machine and large instrument to clear off the rust and adhesion underside. Specification: 1. Blow Per Minute:3000 b/min 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:200L/min 5. Net Weight:1800g 6. Tool Length:230mm 7. Packing:5pcs/11kg/11.5kg/0.4'

Description: Needle Scaler powerful for exerting and chisel is suitable to dismantle. It's was designed specially to use for a long time. And suitable for boat, machine and large instrument to clear off the rust and adhesion underside. Specification: 1. Blow Per Minute:3000 b/min 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:200L/min 5. Net Weight:2590g 6. Tool Length:385mm 7. Needle:19 pcs 8. Packing:5pcs/14kg/14.5kg/0.4'

Description: The 3” PAD supply various of sponge and wool-wheel for partial. Small volume, light weight, low noise. It’s suitable for the small area to smooth. A durable yet economical choice offering longer life and higher speed to be suitable for process in vehicle body shop, mold and woodworking. Specification: 1. Free Speed:2500 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:600L/min 5. Net Weight:790g 6. Tool Length:160mm 7. Packing:20pcs/20kg/21kg/1.2'

Description: There are 2” or 3” kinds of PAD it’s useful for aperture smooth and grind. Long life, high speed. Light weight and trouble free. A durable yet economical choice offering longer life and higher speed to be suitable for process in vehicle body shop, mold and woodworking. Specification: 1. Free Speed:15000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:600L/min 5. Net Weight:650g 6. Tool Length:160mm 7. Packing:20pcs/18kg/19kg/1.2'

Description: A lot of appurtenances to supply the various of sandpaper and burnishes for process. It was designed specially to use for a long time. Volume is small, the weight is light and the rotational speed is fast. There are three kind orbital diameter can choose.(0.75mm, 1.5mm, 3mm) It’s suitable for burnishes that cannot grind the detailed polish and useful for process in difficult reach area, mold and woodworking. Specification: 1. Free Speed:13000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:600L/min 5. Net Weight:815g 6. Tool Length:180mm 7. Packing:20pcs/21kg/22kg/1.2' 8. SM01N:Orbital Diameter:3mm 9. SM01NA:Orbital Diameter:1.5mm 10. SM01NB:Orbital Diameter:0.75mm

We have provided over $1 Billion in business loans to over 15,000 business owners just like you. We use our own designated risk technology to provide you with the right business loan so you can grow your business. Our services are fast and reliable, loans are approved within 48 hours of successful application. We offer loans from a minimum range of $5,000 to a maximum of $500 million. We are certified and your privacy is 100% safe with us. Worry no more about your loans or finances. Contact us today via:fivestarfinancecompany@gmail.com WhatSapp: +13056800886

Minimum Order: 70000

Top Quality IP66 Waterproof Tracking Devices gps403 4G Mini Motorcycle/Vehicle GPS Tracker  For car & Motorcycle tracking                  1    9.6×5.3×1.8cm , 70g     2    Band :        2G   1900/1800/900/850 MHz        4G   B1/B2/B3/B4/B5/B7/B8/B12/B17/B20/B40"     3    350mAh rechargeable battery     4    SOS / Microphone      5    Cut off engine      6    Support fuel sensor      7    Door open /shock /movement /GEO fence alerts      8    Free tracking platform      9    Free mobile app      10    Internal memory 100KB     1, Summary This tracker is a new product based on the LTE/ GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. It can track and monitor remote target by SMS or internet. Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker     2, Specifications Content Specification DIM 9.6×5.3×1.6cm Weight 70g Network GSM/GPRS/LTE Band 4G (B1/B2/B3/B4/B5/B7/B8/B12/B17/B20/B40) 2G (1900/1800/900/850 MHz) GPS sensitivity -159dBm GPS accuracy 5m GPS start time Cold status  45s Warm status  35s  Hot status  1s Car power supply 12 V -24V Back up battery Chargeable 3.7V 350mAh Li-ion battery Storage Temp -40°C to +85°C Operation Temp. -20°C to +65°C Humidity 5%--95% non-condensing 3, Features and Functions: GSM/GPS LED Indicator Initialization Change Password Authorization Single Locating Auto track continuously Automatic update positions of vehicle turns GPS drift suppression Absolute street address by SMS Location based service (LBS) Data logging Data Load Forward the third parties' message Charges Inquiry Alarm Function Low battery alarm External Power off alarm GPS blind Spot alert SOS Geo-fence Multi-area management Movement alarm Over speed alarm ACC working alarm Alarms under Arm State 1 ACC alarm 2.Shock Sensor alarm Alarm without GSM network service Check the Vehicle State Reset Hardware Sleep Mode 1 Sleep by time 2 Sleep by shock sensor 3 Deep Sleep by shock sensor 4 No sleep mode Scheduled wake-up Check IMEI Set up Terminal (local) Time TCP / UDP Switch Configure parameters by USB GPRS setting Less GPRS traffic Modes Switch between "SMS" and "GPRS" Set up monitor center number Cut off the Oil and Power System Packaging Detail:  GPS unit 12PIN harness Microphone Relay Manual Giftbo , x Remote controller ( only for model 403B)   Optional Alarm siren(big or small both ok) Fuel sensor 4, FIVE tracking solutions:   1. SMS tracking by calling with latitude and longitude, speed, battery status, Google map link 2. Get absolute street address by SMS 3. Free web tracking application  4. Optional web server 5. Free mobile tracking app for phone app

Minimum Order: 1 bags

    1, Summary This tracker is a new product based on the LTE/ GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. It can track and monitor remote target by SMS or internet. Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker     2, Specifications Content Specification DIM 9.6×5.3×1.6cm Weight 70g Network GSM/GPRS/LTE Band 4G (B1/B2/B3/B4/B5/B7/B8/B28/B40) 2G (1900/1800/900/850 MHz) GPS sensitivity -159dBm GPS accuracy 5m GPS start time Cold status  45s Warm status  35s  Hot status  1s Car power supply 12 V -24V Back up battery Chargeable 3.7V 70mAh Li-ion battery Storage Temp -40°C to +85°C Operation Temp. -20°C to +65°C Humidity 5%--95% non-condensing 2022 car gps tracker 4G gps-401d lte gps tracking device for motorcycle 4G gps tracker gps-401d *4G VOLTE/ 2G gsm network *New platform lifetime free use :www.baanooliot.com,multiple language and maps *For Vehicle/motorycle/ electric car, motorbike *Remote Cut-Off (Fuel/Power) *Multiple Alerts ACC/ movement /geo-fence entry/exit, abnormal vibration, over speed, * auto track with/without sleep mode * Internal buzzur siren *Cheap price GPS Tracker Coban 401 4g Specifications: Product name LTE wireless data terminal Model 401 DIM. 6.78*4.1*2.15 cm Weight 58g Network , GSM/GPRS/LTE Band 4G(B1/B2/B3/B4/B5/ , B7/B8/B28/B40) 2G(850/900/1800/1900Mhz) , GPS sensitivity -165dBm GPS accuracy 5m Time To First Fix Cold status 45s Warm status 35s Hot status 1s Applicable car power 12V-24V Battery Chargea , ble changeable 3.7V 100mAh Li-ion battery Storage Temp. -40°C to +85°C Operation Temp. -20°C to +65°C Humidity 5%--95% non-condensing 1. Terminal installation Please ask a qualified engineer to install it. The installation environment should ensure that the GSM and GPS signals are good Please do not install it in a dusty and humid environment. Find the 5PIN wiring harness provided with the product, insert it into the corresponding wiring hole of the product, and connect to the original car circuit as shown in the following Wiring Diagram: 2022 car gps tracker 4G gps-401d lte gps tracking device for motorcycle 4G gps tracker gps-401d Wiring Diagram (Fuel motorcycle/car) GPS-401C/D (12/24V) for motorcycle car tracking with relay oil engine stop function GPS401C/D coban gps tracking device 2022 car gps tracker 4G gps-401d lte gps tracking device for motorcycle 4G gps tracker gps-401d Applications: * Motorcycles,Vehicles * Private car anti-theft * Fleet management * Car rent * Insurance company Auto electronics gps car locator gps-401C coban gps tracking device Vehicle gps tracking device gps-401 Functions: 1 Changing password 2 Authorization 3 Single tracking 4 Tracking Scheme 5 Smart angle updating 6 Location based service (LBS) / Cell-ID tracking 7 Listen 8 Forwarding incoming SMS messages 9 SIM Card Balance Enquiry 10 ACC ON/OFF Alert 11 Lock motor(For A/B model) 12 Remote boot/off motor(For A/B model) 13 Remote immobilizing(For C/D model) 14 Configure times of alarm SMS 15 Alarms 16 Remote control function(For B/D model) 17 Arming 18 Silent Arming 19 Disarming 20 Alarm function in arming state 21 Check Status 22 Check IMEI 23 Local time setting 24 Reset Hardware 25 TCP / UDP switch 26 SMS Mode 27 Configure SMS monitoring center number 28 Configure heartbeat package interval 29 Initialization 4G Coban vehicel gps tracker/ gps track Coban gps-401 4g *4G LTE/ 2G gsm network - 4G (B1/B2/B3/B4/B5/B7/B8/B28/B40) 2G (1900/1800/900/850 MHz) *wheel alarm for GPS-401AB * GPS-401AB (9-100V Operating Voltage ) GPS-401CD( 12/24V) *App and web platform lifetime free use. *For Vehicle/motorycle/ electric car, motorbike *Remote Cut-Off (Fuel/Power) *Multiple Alerts ACC/ movement /geo-fence entry/exit, abnormal vibration, over speed, * auto track with/without sleep mode * Internal buzzur siren *Cheap price Detailed Images: Car gps tracker vehicle tracking gps

Minimum Order: 1 bags

We Provide Forged Piston Check Valves, 1-1/2 Inch, 800 LB, API 602, ASME B16.34, Bolted Bonnet, Regular Bore, ASTM A105N, Socket Weld End, and Piston Type. 800LB Forged Piston Check Valve, API 602, 1-1/2INCH, 800LB, SW, A105 Body, Trim 8 Valve Description: API 602 Forged Piston Check Valve Design Standard: API 602, ASME B16.34 Structure: Bolted Bonnet Nominal size: 1-1/2 Inch Nominal class: 800 LB Bore: Regular Bore End Connection: SW-Socket Weld End Operation: / Body Material: ASTM A105N Trim Material: 1Cr13+STL, No.8 Face-to-face: Manufacturer Standard Test and inspection: API 598 Key Features: Fully guided solid disc, Piston Type (Swing type available) Product Range: Body material: Carbon Steel, Stainless Steel, Duplex steel, Alloy Normal diameter: 1/2 - 2 Inch (DN15 - DN50) Pressure range: 800 - 2500 LB End connection: SW, NPT, BSP Working temperature: -29℃ - +400℃

Minimum Order: 1 bags