Offers to Sell

Color Coated Aluminum Coil Introduction: Color coated aluminum coil is the aluminum coil as the base material, after the surface paint coloring treatment to get the product, common fluorocarbon coating, polyester coating, etc.. Color coated coil base material is generally used 3004 aluminum coil, 3105 aluminum coil, etc. With the performance advantages of color coated aluminum coil recognized by everyone, its application areas are becoming more and more extensive. Color Coated Aluminum Coil Performance: 3004 Color coated aluminum coil with 3004 aluminum coil: 3004 aluminum coil belongs to a series of AL-Mn alloy, with higher strength than 3003 aluminum sheet, good formability, solubility and corrosion resistance, requiring higher strength parts than 3003 alloy. 3105 Color coated aluminum coil with 3105 aluminum coil: 3105 aluminum coil has good rust resistance, good electrical conductivity, high plasticity in the annealed state, plasticity is still good when semi-cold work hardening, low plasticity when cold work hardening, good corrosion resistance, good weldability. Color Coated Aluminum Coil Features: 1. Temperature resistance The melting point of aluminum is 660 degrees, and the general temperature does not reach its melting point. 2. Corrosion resistance Because of its tight surface oxide film, it has strong adhesion, oxidation resistance, acid resistance, alkali resistance, corrosion resistance, decay resistance and UV resistance. 3. Color uniform, long-lasting Soft and colorful, avoiding the individual chromatic aberration of traditional spraying, no matter how large the ceiling, its color and color are consistent. Lasting and new. 4. Rigid joint, the strength of the board is extremely high Rigid and tough combination, free to cut, slit, arc, balance, drilling, joint fixation and edge compression molding. 5. Environmental protection Not easy to turn yellow, using chromium-free treatment liquid to make up for the defects of easy discoloration of the laminating board; the roller paint contains active chemical molecules, which promotes the formation of a protective layer on the surface of the material. Active chemical molecules are stable and easy to recycle, meeting environmental requirements.

1. Descriptions: Cationic Synerguars provide superior deposition because they are cationic and the hair surface is anionic.On the other hand, through entrapments of particle, cationic Synerguar can also enhance the delivery and deposition of active agents onto hair surface.Through deposition of polymer and or active agents, surface modification occurs and could ultimately be translated into conditioning. Because of specific molecular weight and charge distribution, cationic Synerguar form large loops when adsorbed onto the surface of hair, while most polymers are deposited as flat layers. This effect significantly increases the thickness of the absorbed layer, and consequently improves combing, detangling, skin feeling of wet & dry hair. Healthy hair is resistant to water. But when it is dyed, permed or bleached, the hair become damaged, rendering it hydrophilic. Deposition of cationic Synerguar on damaged hair restores the hydrophobic characteristic of normal hair. Cationic Synerguar can also help increase hair tensile strength and consequently reduce hair breakage. 2. Specifications: Product Type: SN-1330 INCI Name: Guar Hydroxypropyl Trimonium Chloride CAS Number: 65497-29-2 Appearance: Creamy white to yellowish, pure and fine powder Application: Hair care Please contact us for more product information.

● The servo motor cooperates with the ball screw feeding system, which can accurately and quickly send the material to the exact position, improving work efficiency ● The saw blade cutting feed system uses a servo motor and rotates with the ball screw to ensure the speed of the saw blade movement and increase the accuracy and stability of cutting. ● Hydraulic power chip cleaning steel brush can effectively remove iron chips from saw blade teeth, improve cutting efficiency and prolong saw blade life ● The unique automatic material distribution system can separate the unneeded material head and material tail from the required finished material during the sawing process to improve work efficiency The gear elimination device can effectively eliminate the gear gap in the gear box, reduce the vibration of the blade during the sawing process, and prolong the life of the saw blade ● Digital monitoring control panel is easy to operate ● Efficient, accurate and stable 24-hour continuous work

10LB UL Approved Dry Powder Fire Extinguisher 90% ABC Portable Omecfire is always desired to produce and supply high quality products to meet customers’ requirement for super quality,thus we acquired the UL certificate for its portable dry powder fire extinguishers of 2.5LB,5.5LB,10LB and 20LB in 2017.Moreover,not only for dry powder extinguishers,we are also taking much efforts in acquiring the UL certificate for aluminum CO2 extinguishers for years and will get it in very near future. Filled with 90% ABC dry chemical powder,UL approved fire extinguishers are designed to use the best material,such as the steel,the plastic and the powder.And for each order,we will make 100% test and inspection during the production and before shipment.Also UL will also send their own inspector to plant for inspection,which will guarantee the product quality dually. Technical Data of UL/ULC Approved 10LB Dry Power Fire Extinguisher: Model Number DC-UL10 Filling Weight(LB) 10 Volume(L) ~5.78 Cylinder diameter(mm) φ150±1 Cylinder Height(mm) 400±2 Extinguisher Height(mm) ~470 Extinguisher Weight(kg) 7.4-7.9 Temperature Range(℃) ﹣40 ～ +49 Working Pressure(bar) 13.5 Test Pressure(bar) 40.5 Fire Class 4A60BC Discharge Time(s) ≥17 Discharge Range(m) ≥3

Automatic saw mill machine is a wood-splitting machine with a circular saw or band saw as the tool. Sawmill machines are common equipment for roughing wood. The sawmill can process larger logs, sections, and squares into thick slices of wood. The treated wood can be used for processing and manufacturing various wood products or for further processing. Due to their high efficiency, smooth operation, and durability, sawmills are widely used in many countries. Therefore, they are widely used in many countries.

Minimum Order: 1 bags

Magnification 4.5-14x Objective Lens Diameter 51.5mm Clear Objective Lens Diameter 42mm Ocular Lens Diameter 39mm Field of View(FOV) @ 100yds, ft 22-7.5 Eye Relief(in) 3.1-3.8'' Exit Pupil 9-3 Click Value 1/4MOA Elevation Adjustment 40MOA Windage Adjustment 40MOA

NeoCide® IVD Reagents PC-300 NeoCide® PC-300 preservative products contain a percentage of one or both chemical substances 5-chloro-2-methyl-4-isothiazolinone-3-one (CMIT) and 2- methyl-4-isothiazloin-3-one (MIT). consists of cmit mit 3 1 in a salt-free proprietary glycol containing an alkyl carboxylate stabilizer with recommended working pH range of 2.0 - 8.5. These active substances present in NeoCide® PC-300 inhibit the Krebs cycle at four different check points within minutes of contact and effectively display broad-spectrum biocidal activity against bacteria, fungi, and yeast.active substances A.I. (Isothiazolinones, CMIT/MIT 3:1) 3.0~3.6(w/w); Stabilizer (Alkyl carboxylate) 2.0~3.0%(w/w); Inerts (Modified glycol) 93.4~95.0% Get a Quote DOWNLOAD View PDF Specification Of NeoCide® IVD Reagents PC-300 Appearance: clear liquid, thick colorless to light yellow Color (APHA): 60 maximum Odor: mild (sweet) Specific Gravity@25C: 1.03~1.04 pH: 3.0- 6.0 (10% Aqueous solution) (CMIT/MIT 3:1) *Active Ingredients: 3.0 – 3.6% Heavy Metal:<0.05% Sulfate:<0.05% *3 , :1 Mixture of 5-Chloro-2-methyl-4-isothiazolin-3-one (CMIT) and 2-Methyl-2H - isothiazol-3-one (MIT). As one of in vitro diagnostics companies, we have types of related products for sale, if you have needs, please contac us.

Minimum Order: 100

We provide rapid test ivd kits for various infectious diseases, such as Ebola test kit, hepatitis c test kit, dengue test kit, Malaria test kit, H.pylori test kit. We integrate our dedicated and professional team of Research & development, manufacturing, sales & marketing, and servicing to realize the superior quality of production and placement of ivd kit, rapid in vitro diagnostic test kits etc. Types Of In Vitro Diagnostic Kits Ebola Test Kit Ebola Rapid Test Kit(colloidal gold method rapid test) is intended for the qualitative detection of ebola antigens from Nose swabs. This test is intended to be used as an aid in the diagnosis of ebola. HCV Test Kit Hepatitis C Virus (HCV) is a small, enveloped, positive-sense, single- stranded RNA Virus. HCV is now known to be the major cause of parenterally transmitted non-A, non-B hepatitis. Dengue Test Kit Dengue virus is an enveloped, single-stranded, positive-sense RNA virus that comprises four related but distinct serotypes (Den 1, 2, 3, and 4). The virus is transmitted by mosquitoes of the daytime-biting Stegomyia family. Malaria Test Kit Malaria is a serious parasitic disease characterized by fever, chills, and anemia and is caused by a parasite that is transmitted from one human to another by the bite of infected Anopheles mosquitoes. H.pylori Test Kit H.pylori infects more than half the people in the world. The prevalence of the infection varies among countries and among different groups within the same country. Advantages Of In Vitro Diagnostic Test Kits Produced By Medikament We advanced engineering techniques and a powerful design team to help you utilize our unique retailfast in vitro diagnostic test kits. We get full ability to provide you high-quality ivd medical device with simple-to-use formats that provide consistent ivd device performance for you and your customers. In Vitro Diagnostic Test Meaning IVD (In Vitro Diagnosis) refers to products and services outside the human body that obtain clinical diagnostic information by testing human samples (blood, body fluids, tissues, etc.) to determine diseases or body functions. After the occurrence of Corona Virus Disease 2019, how to quickly and accurately screen and diagnose patients with new coronary pneumonia has become the top priority of epidemic prevention and control. Rapid Test Kit Colloidal Gold The colloidal gold test kit is simple and fast to operate, no ceremony is required, and the detection time only takes 5-15 minutes. It is suitable for rapid on-site detection in grassroots hospitals, disease control institutions, airports, customs, etc., and fully serves the needs of epidemic prevention and control. This diagnostic kit is lightweight, portable, and suitable for places where a large-scale investment is in dense crowds. The test kits sold by our company, including Ebola Test Kit, HCV Test Kit, Dengue Test Kit, Malaria Test Kit, H.pylori Test Kit, can be used in various scenarios. Colloidal Gold Antigen Test Instructions Colloidal gold is a commonly used labeling technique. Diagnostic kit colloidal gold is a new type of immunolabeling technique that uses colloidal gold as a tracer to be applied to antigen and antibody. It has its unique advantages. It has been widely used in various biological researches in recent years. Almost all immunoblotting techniques used in the clinic use its markers. At the same time, it can be used in flow cytometry, electron microscopy, immunology, molecular biology and even biochips. Ebola Test Kit is a diagnostic kit colloidal gold product recommended by our company, which can quickly and accurately produce results. Colloidal Gold Antigen Test Accuracy Mainly depends on whether the sensitivity and specificity of the raw materials such as monoclonal antibodies, polyclonal antibodies, antigens, haptens, protein chimeras, and colloidal gold can meet the highest standards. Test kit colloidal gold also depends on the protein purification method, antibody subtype, protein purity and preservation solution. Frequently Asked Questions About IVD Test Kits Q What are in vitro diagnostic tests? A An inspection kit is a common in vitro diagnostic medical device, also known as ivd in vitro diagnostic device, which refers to a kit for inspecting a specific item, usually used in in vitro diagnostic tests. The commodity form is a packaging box that contains all the reagents of the item. For example, ELISA surface antigen detection kit includes coating plate, yin-yang control, enzyme reagent, plate washing solution, chromogenic solution, termination solution, etc. The test reagent management system is a professional reagent management software, which is specially developed for the efficient and accurate management of reagents in the laboratory. It is applicable to the laboratory departments of hospitals, blood centers, and CDC. If you want to know more about ivd test kits price, please contact us.

Minimum Order: 100

What Does In Vitro Diagnostic Use Mean? IVD products are known as "in vitro diagnostic products". IVD refers to medical devices, in vitro diagnostic reagents, and drugs. IVD, as a branch of medical devices, has unique definitions and regulatory supervision. The in vitro diagnostics industry and laboratory medicine constitute an organic whole that is not only different from each other but also closely related to each other. The in vitro diagnostics industry is the "tool" and "weapon" of laboratory medicine. At the same time, laboratory medicine is the "user" and "market" of the IVD industry. About 80% of clinical diagnosis information comes from IVD, and its cost accounts for less than 20% of medical expenses. IVD is an important part of diagnosis, Immunohistochemistry, treatment of human health. Medicament supplies ivd raw materials, in vitro diagnostics reagents and IVD test kits as well. Types Of IVD products list Neocide® IVD Reagents NeoCide® Preservative is effective preservation of chemicals (abbreviated to PC) and a new biocide (unison to NeoCide) for controlling microorganisms in biological media for professional in vitro diagnostic use only products. Neocide® Tris (hydroxymethyl) Aminomethane Good's buffer has the following characteristics: 1. High water solubility; 2. Low cell membrane permeability; 3. stable acid-base dissociation constant; 4. Low metal chelating capacity Cardiac Marker Test The main markers of myocardial injury were troponin T, troponin I, creatine kinase isoenzyme mass (CK MB) and myoglobin. Troponin is composed of three subunits. What are IVD products The full name of "IVD" is "in vitro diagnostic products". IVD refers to medical devices, in vitro diagnostic reagents and drugs. As a branch of medical devices, IVD has unique definitions and regulatory supervision. Advantages Of IVD Raw Materials Produced By Medikament We are committed to providing the highest quality ivd diagnostics raw materials and ivd diagnostics reagents for in vitro diagnostic use only. Our in vitro diagnostic products strictly control the quality inspection, which can provide you solid, repeatable, dependable results, to meet the critical challenges faced by reagent vendors, and the verification of government agencies. The ingredient of our ivd products is exactly the same as Sigma-Aldrich, Roche, et al. In Vitro Diagnostic Use Only Meaning The rapid development of IVD technology, from gene sequencing, SNP screening, point mutation gene diagnosis, to the detection of various biomarkers (biomarker) at the protein level, detection of circulating tumor cells (CTC) at the cellular level, thin layer Liquid-based cytology (TCT), then to PET/CT at the tissue level. The application prospects mainly include the following aspects: Physical examination, Chronic disease management, Critical illness monitoring. Frequently Asked Questions About IVD Raw Materials Q What Is IVD? A As we all know, the blood routine, urine routine, stool routine, blood sugar monitoring, anemia screening and so on that we do in the hospital all use diagnostic reagents. These diagnostic reagents are normally used without contact with the human body, so are they called "in vitro diagnostic reagents"? Nowadays, in-vitro diagnostic reagents are basically needed for disease prevention and clinical diagnosis and treatment. Whether it is the three major routine tests for hematuria and stool, the identification of viral and bacterial infections, the heart, liver, kidney, blood vessel, and immune function tests, in-vitro diagnostic reagents are inseparable. If you want to know more about in vitro diagnostics examples, please visit our website.

Minimum Order: 100

HOUSEHOLD ENERGY STORAGE SYSTEM The maximum operating power is 3kw/5kw. These are several types of household energy storage systems with different rated energy, that is The 5.8WKh and 23 WKh. This battery-based energy storage system is mainly used with solar panels outside which is environmentally friendly. And its working temperature range is wide from -20 to 60 °C. The maximum continuous output power of the single machine is 5KW. The competitive edges of it are that quick storage retrofit on existing PV plant, compatible with all inverter brands, built-in 5.1kWh lithium battery (extendable), with UPS function, switch time≤10ms and easy setting of various working modes. PARAMETERS OF HOUSEHOLD ENERGY STORAGE SYSTEM No. Items SPEC. AS1-3KS-5.1 (Master Unit) 1 Total Energy Capacity/Wh 5120 2 Battery Capacity/Ah 100 3 Rated Voltage/V 51.2 4 Voltage Range/V 42-58.5 5 DOD ≤90％ 4 Cycle Life ≥6000 5 Max. Charge Current/A 60 6 Max. Discharge Current/A 60 7 Scalability Yes (up to 20.4kWh） 8 Max. Continuable Output Power/VA 3000 9 Communication Mode Wi-Fi/4G/Ethernet (Optional） 10 Applicable Standard AS 4777.2 VDE 4105, G98, C10/C11, CEI0-21, IEC62619, IEC62040 No. Item SPEC. Parameters 1 Total Energy Capacity/Wh 5120 2 Available Capacity/Wh 4600 3 Rated Voltage/V 51.2 4 Voltage Range/V 42-58.5 5 DOD ≤90％ 6 Cycle Life ≥6000 7 Max. Charge Current/A 60 8 Max. Discharge Current/A 60 9 Operating Temperature Range -10°C-50°C 10 Applicable Standard UN38.3 IEC 62619 No. Item SPEC. PH-GSP27135250-15S1P 1 Total Energy Capacity/Wh 5120 2 Single Battery Capacity/Ah 100 3 Rated Voltage/V 48 4 DOD ≤90％ 5 Cycle Life ≥4000 6 Max. Charge Current 1C 7 Max. Discharge Current 1C 8 Scalability Yes (up to 48kWh） 9 Size (H*W*D*, mm) 628*198*528mm 10 Weight 45Kg HOUSEHOLD ENERGY STORAGE SYSTEM COMPETITIVE EDGES A household energy storage system is currently divided into two kinds, grid- connected and off-grid. A grid-connected household energy storage system is mixed-powered by solar and the energy storage system, including five parts: solar array, grid-connected inverter, BMS (battery management system), battery pack and AC load. Quick storage retrofit on existing PV plants. Compatible with all inverter brands. Built-in 5.1kWh lithium battery (extendable). With UPS function, switch time≤10ms. Easy setting of various working modes. As a lithium battery exporter, we will do our best to meet all the needs of customers.

Minimum Order: 1 bags

LONG-SHELF-LIFE LFP POWER BATTERY FOR CONTAINERIZED ESS Cycle Life: The capacity retention rate≥80%@4500cycles, ≥70%@7000cycles. PARAMETERS OF LONG-SHELF-LIFE LFP 21700 BATTERY FOR CONTAINERIZED ESS Models: GSP42173135-150Ah——Mass production GSP54173202F-202Ah ——Trial production (mass production are expected to start in the second half of 2020） GSP71173202-280Ah——Experimental stage (mass production are expected to start by 2021） Models: GSP36130162-50Ah GSP2 , 7135250-100Ah GSP34135214-100Ah Certific , ates GSP36130162-50Ah GSP27135250-100Ah GSP34135214- 100Ah UN38.3 - √ √ IEC62619 - - √ MSDS √ √ √ As one of lithium battery suppliers, we have types of chinese lithium batteries for sale, more details, please visit our website. If you want to know the lithium battery price is affordable, if you have needs, please contact us.

Minimum Order: 1 bags

UPS ENERGY STORAGE SYSTEM The Application scenario of the communication base station backup power supply is the outdoor communication base station and the IDC machine room. In the aspect of communication base station, there are many different products, like 48100, 4810 and 4875. And its working pattern is different. The competitive edges are that small size, high voltage and big capacity--better traditional lead-acid battery replacement choice, standard server size that can be built-in 19-inch rack--save room, wide operating temperature range, long service life and independent development and production of single cells--make sure consistency performance of cells.   INQUIRY NOW PARAMETERS OF UPS ENERGY STORAGE SYSTEM No. Item SPEC. 48100 1 Capacity/kWh 4.8kWh 2 Rated Voltage/V 48 3 Material LFP 4 Standard Discharge Current/A 0.2C 5 Max. Continuous Discharge Current 1C 6 Standard Charge Current 0.2C 7 Max. Continuous Charge Current 1C 8 Cycle Life ≥1500 9 Communication Mode RS232，RS485 10 Operating Temperature Range Charge 0-45℃ Discharge -20-60℃ 11 Applicable Standard UL, IEC62619, UN38.3 No. Item SPEC. 1 Module Specifications 12S2P (0.5C） 8S3P (0.3C） 2 Rack Series And Parallel 180S2P (15 modules+1 high-pressure box） 184S3P (23 modules+1 high-pressure box） 3 System Series And Parallel 180S12P (6 racks parallel） 184S12P (4 racks parallel） 4 Rated Capacity 300Ah/1800Ah 450Ah/1800Ah 5 Rated Voltage DC576V DC588.8V 4 Working Voltage Range 450V～657V 460V～671.6V 5 Operating Voltage Range 522V～639V 533.6V～653.2V 6 Rack Rated Energy 172.8KWh 264.96KWh 7 System Rated Energy 1036.8KWh 1059KWh UPS BATTERY COMPETITIVE EDGES The application area is the outdoor communication base station and the IDC machine room. And there are four working patterns, that is pattern 1 normal electric supply, pattern 2 overrun electric supply voltage, and frequency, pattern 3 out of electric supply, and pattern 4 UPS system fault. The 48100 Backup Power of Communication Base Station whose cycle life is over 2000 times. Small size, high voltage, and big capacity--better traditional lead-acid battery replacement choice. Standard server size that can be built-in 19-inch rack--save room. Wide operating temperature range. Long service life. Independent development and production of single cells--make sure consistency performance of cells. If you want to know more about lithium ion ups for home, please leave us a message. As one of lithium battery suppliers china, we have types of chinese lithium batteries for sale, more details, please visit our website.

TWS EARPHONE COIN CELL Structure Design Structure with high security and efficient use of space makes the coin cell battery storage capacity higher than domestic peer corporations. Material Selection Advanced materials technology platform satisfies the requirements of 3~5C fast charge and 4.35V high voltage performance. Production Capacity A production capacity of 13000 pcs/day can meet the demand of big deals. Automatic Equipment Advanced automatic production from a large-scale screw feeder system to fully automatic screening system in packaging can ensure the consistency of our coin button battery effectively. Advanced Quality Management System The mature supporting TS16949 system helps quality control of products throughout the whole process. Model ICR1254 ICR1265 ICR1454 ICR1654 ICR9440 ICR1054 ICR1240 ICR1440 Nominal Voltage (V） 3.7V 3.7V 3.7V 3.7V 3.7V 3.7V 3.7V 3.7V AC/IR (mΩ) ≤550 ≤500 ≤500 ≤450 ≤1000 ≤700 ≤700 ≤600 Capacity(C3) (mAh） 60 70 85 110 25 35 45 50 Continuous Discharge 1C Continuous Charge 2C Cycle Life ＞500Times Workable Temperature Charge (℃) 0 to 45℃ Workable Temperature Discharge (℃) -20 to 60℃ TWS EARPHONE COIN CELL MANUFACTURING TRACEABILITY SYSTEM A smart factory's information platform capable of human-machine collaboration can realize real-time quality data collection through the production process, in-time control and post hoc analysis. GET IN TOUCH WITH YOUR LITHIUM BATTERY SUPPLIER-GREAT POWER Reach Out to Great Power We Want To Hear From You Curious about lithium batteries wholesale technology? Need help selecting the right battery? Call us toll-free or use the form to let us know how we can help and we'll be in touch with you promptly. If you have needs to buy any tws earbuds battery, please contact us. As one of lithium battery manufacturers china, we have types of related products for sale, more details, please visit our website.

STANDARD BATTERY MODULES FOR BASE STATION A standard battery module for the base station includes a plurality of unit cells; A first barrier located between adjacent ones of the unit cells; A second barrier located between adjacent ones of the unit cells and spaced from the first barrier; and spacers located between the first barrier and the second barrier. PARAMETERS OF STANDARD BATTERY MODULES FOR BASE STATION No. Item SPEC. 48100 1 Capacity/kWh 4.8kWh 2 Rated Voltage/V 48 3 Material LFP 4 Standard Discharge Current/A 0.2C 5 Max. Continuous Discharge Current 1C 6 Standard Charge Current 0.2C 7 Max. Continuous Charge Current 1C 8 Cycle Life ≥1500 9 Communication Mode RS232，RS485 10 Operating Temperature Range Charge 0-45℃ Discharge -20-60℃ 11 Applicable Standard UL，IEC62619，UN38.3 No. Item SPEC. 1 Module Specifications 12S2P (0.5C） 8S3P (0.3C） 2 Rack Series And Parallel 180S2P (15 modules+1 high-pressure box） 184S3P (23 modules+1 high-pressure box） 3 System Series And Parallel 180S12P (6 racks parallel） 184S12P (4 racks parallel） 4 Rated Capacity 300Ah/1800Ah 450Ah/1800Ah 5 Rated Voltage DC576V DC588.8V 4 Working Voltage Range 450V～657V 460V～671.6V 5 Operating Voltage Range 522V～639V 533.6V～653.2V 6 Rack Rated Energy 172.8KWh 264.96KWh 7 System Rated Energy 1036.8KWh 1059KWh RECHARGEABLE ENERGY STORAGE SYSTEM COMPETITIVE EDGES Small size, high voltage, and big capacity--better traditional lead-acid battery replacement choice. Standard server size that can be built-in 19-inch rack--save room. Wide operating temperature range. Long service life. Independent development and production of single cells--make sure consistency performance of cells. As a lithium battery factory china, we have types of lithium batteries for sale, anything you need, please contact us.

Minimum Order: 1 bags