Offers to Sell

Product Description Equal Tee galvanized malleable iron pipe fittings Cast Iron Fittings factory is located in CHINA (both manufacturing plants and foundry) and has been exporting fittings for the last 23 years all over the world. Product Overview Equal Tee galvanized malleable iron pipe fittings Cas with their extensive history and tradition, malleable cast iron fittings are the most common pipe fittings. With their extensive history and tradition, China galvanized pipe fitting manufacturers are the most common pipe fittings. Because of their durability and mechanical strength, these fittings are very popular. The material can endure high mechanical stress and when combined with the standardized jointing method can be used in a wide range of applications. Equal Tee galvanized malleable iron pipe fittings. GI fittings start out as white iron casting but is then treated at a heat of roughly 1,650°F, 900°C. Malleable iron contains more blunt boundaries opposed to flakes, which eliminates the stress concentration problems that grey cast iron can cause. Disadvantages of cast iron • It is Prone to rusting. • It has poor tensile strength. • Its parts are section sensitive; this is due to slow cooling of thick sections. • failure of Its parts is sudden and total; it does not exhibit yield point. • It has poor impact resistance. • Compared to steel it has poor machinability.

Minimum Order: 10 long tons

Product Description No90 Galvanized Elbow 90 Degree Female malleable iron pipe fittings are designed according to the EN 10242 standard and available in black and hot-dip galvanized versions. They are threaded according to EN 10226-1. The material ensures resistance against mechanical stress and long durability. Product Overview China galvanized pipe fitting manufacturers with their extensive history and tradition, malleable cast iron fittings are the most common pipe fittings. Because of their durability and mechanical strength, these fittings are very popular. The material can endure high mechanical stress and when combined with the standardized jointing method can be used in a wide range of applications. Galvanized pipe fittings factories are usually used to connect steel pipes. However, galvanized malleable fittings are used for galvanized pipe. Malleable iron pipe fittings are most common among malleable fittings and are available in many different types and sizes. What is malleable fitting? Malleable fittings are those fittings having the property of malleability. This is a physical property of metals and metalloids, or any kind of matter. We call a metal malleable when it can easily be deformed, especially by hammering or rolling, without cracking the metal. Malleability is important to form pressing materials such as metals and plastics.

Minimum Order: 10 long tons

Product Description Ductile iron grooved elbow 90 Degree No90 are one type of Grooved fittings. We supply both Blue and RAL3000 for difference used. China grooved pipe fittings have larger radius than elbows. Generally, the most basic difference is the radius of curvature. Elbows generally have a radius of curvature between one to twice the diameter of the pipe. Bends have a radius of curvature more than twice the diameter. Product Detail USE for Fire protection with UL/FM certificated. The Material made by EN545 ductile iron cast fittings. 90° grooved elbow can be used as a corner piece or other joining piece for an industrial decor project. IPS threads for compatibility with other project materials such as lamp parts, valves, etc. Pipe decor line contains an array of fittings and connectors for a variety of projects that can be used. Grooved Size Range: 1/2" to 12". All size can be supply by detail Request. • Compact, full-flow design optimal for use in tight spaces • Connects pipe and provides change in direction. • Pressures up to 400psi I 2758 kPa • Sizes from 2’’ – 12’’ I DN50 – DN300 • Regional availability, contact YINUO for details. Pipe fitting manufacturers come in a range of sizes and shapes to fit different pipe sizes and configurations. They can be threaded or non-threaded, Threaded fittings have threads on the inside of the fitting that screw onto the outside of the pipe, while non-threaded fittings are designed to be welded or soldered onto the pipe. depending on the type of pipe and fitting being used.

Minimum Order: 10 long tons

SHORT DESCRIPTION STYLE Cast Iron FLANGE ADAPTER The gasket seating surfaces on the pipe and on the face of the mating flange must be free from gouges, indentations and deformities of any type for proper sealing. Refer to the installation instructions for complete information. • Vic-Flange Adapters must be assembled so there is no interference with mating components. PRODUCT DETAIL Gasket: (specify choice1) Grade “M” Halogenated Butyl Halogenated Butyl (Brown color code). Temperature range –20°F to + 200°F/–29°C to +93°C. Specifically compounded to conform to ductile pipe surfaces. Recommended for water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. UL classified in accordance with ANSI/ NSF 61 for cold +86°F/+30°C potable water service. NOT RECOMMENDED FOR PETROLEUM SERVICES. Grade “S” Nitrile (Red color code). Temperature range –20°F to +180°F/–29°C to +82°C. Specially compounded to conform to flanged ductile iron pipe. Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range; except hot dry air over + 140°F/+60°C) and water over +150°F/+66°C. STYLE Cast Iron FLANGE ADAPTER NOT RECOMMENDED FOR HOT WATER SERVICES. 1 Services listed are General Service Guidelines only. Pipe fitting manufacturer should be noted that there are services for which these gaskets are not compatible. Reference should always be made to the latest Victaulic Gasket Selection Guide for specific gasket service guidelines and for a listing of services which are not compatible. Bolts/Nuts: (specify choice) Standard: Carbon oval steel neck track bolts meeting the mechanical property requirements of ASTM A449. Carbon steel heavy hex nuts meeting the mechanical property requirements of ASTM A563 Grade B. Track bolts and heavy hex nuts are zinc electroplated per ASTM B633 ZN/FE5, finish Type III (imperial) or Type II (metric). Optional: Bolts – Stainless steel, meeting the mechanical property requirements of ASTM F593, Group 2 (316 stainless steel), condition CW. Nuts – Stainless Steel meeting the mechanical property requirements of ASTM F594, Group 2 (316 stainless steel), condition CW, with galling reducing coating.

Minimum Order: 10 long tons

SHORT DESCRIPTION Generally, Ductile iron Grooved Equal Cross No180 is used to separate branches of a pipeline as a special pipe fitting. The grooved reducing cross is characterized by a reduced diameter, as opposed to other branches. The cross tee fittings is called a cross if both pipes are of the same diameter. A wide array of wholesale sanitary cross tee branches applications is performed by these fittings, including petrochemicals, oil, natural gas, power plants, food sanitation, building construction, and urban development. PRODUCT DETAIL What are the disadvantages of ductile iron pipe Disadvantages? Ductile Iron Grooved Fittings have the similar corrosion rate to cast iron and steel pipe. Prone to external and internal corrosion. Internal and external protection systems required. Limited number of protection systems available. Polyethylene wrappings can be damaged. Today, Ductile iron Grooved Equal Cross No180 standard compact fittings C153 are commonly used in place of full Body fittings C110. They are designed to be to be more lightweight and more economical to use while providing better flow characteristics.

Minimum Order: 10 long tons

SHORT DESCRIPTION Threaded grooved mechanical tee NPT Outlet with threaded outlet (302) provides a direct branch connection at any location where a hole can be cut in the pipe. The gasket is a pressure-responsive design that provides the seal. PRODUCT DETAIL What is the purpose of a mechanical tee? Ductile Iron Grooved Fittings create outlets that exit pipes, but the outlet is not necessarily the same size as the main pipe. Indeed, many mechanical tees are reducing, meaning that the branch pipe is smaller than the main pipe. Outlet size is also given in nominal pipe size, not actual size. threaded mechanical tee provide a fast and easy mid pipe outlet the requires no welding. A direct branch connection can be made anywhere you can cut a hole in the pipe. They are mounted to the pipe using a collar and provide a smooth flow area. Gaskets conform to the O.D. of the pipe, they are of a pressure-responsive design, so pipe fitting manufacturers provide a complete seal. Allows easy creation of a BSP threaded branch outlet without using reducing tees, couplings or welding. 2 1/2" (65mm) Female BSP threaded branch outlet Red painted body in ductile iron with an EPDM rubber seal FM (Factory Mutual) & UL certified For use with 6" NB (165.1mm OD) & 2 1/2" NB (76.1mm OD) pipe 2x 5/8" bolts (105mm length) & hexagon nuts included.

Minimum Order: 10 long tons

SHORT DESCRIPTION MECHANICAL-T BOLTED BRANCH OUTLET STYLE Victaulic mechanical tee as part of grooved piping systems, use gaskets secured by housings to attach a new line of pipe to an existing one. The mechanical force from the bolts and nuts combined with the gasket and lubricant creates a tight seal around a hole drilled into a run of pipe. PRODUCT DETAIL What is the difference between tee and mechanical tee? The MECHANICAL-T BOLTED BRANCH OUTLET STYLE Victaulic Tee pipe fitting is used for connecting pipes of the same diameter, while the reducing tee is used for connecting pipes of different diameters. The branch diameter of the threaded mechanical tee connection can never be equal to the main pipe diameter. Yinuo is one of the grooved fittings manufacturers exporting to the international market. The pipe fitting manufacturer serves the same function as the MT-1 and MT- 8 but uses a steel electro-plated U-bolt to save space for easier installation in tight places. The MT-90 is ideal for direct connections with sprinkler heads and drop nipples. • Housing: ASTM A536 65-45-12 Ductile Iron • Gasket: Pre-lubricated, Pressure responsive EPDM • Bolts & Nuts: Grade 5 • Compliance: UL® Listed, C-UL ® Listed, FM® Approved • Maximum Pressure: 300 psi • Paint Color : Red (Optional as Galvanized - GALV)

Minimum Order: 10 long tons

SHORT DESCRIPTION YINUO Grooved Equal Tee No130 ductile iron grooved fittings: Grooved Equal Tee No130 grooved piping system is reliable and is faster to install than welding, threading, or flanging, resulting in lowest installed cost. it can be adopted to suit standard pipe with cut grooves or standard and light wall pipe with rolled grooves. we are the exclusive agent of the mech brand ductile iron grooved fittings which has the UL/FM certificates. PRODUCT DETAIL What is grooved pipe fittings used for? Grooved Equal Tee No130 pipe couplings and grooved tee are used to join pipes in both wet and dry system. They provided some flexibility in terms of movement and deflection to the piping system. The concept of grooved coupling was invented in 2006 when Yinuo, a pipe fitting manufacturer, designed the first mechanical coupling. FIG 7060 Standard Tee Grooved Equal Tee No130 fitting. Fittings for grooved-end pipe. These Ductile Iron Grooved Fittings are designed to provide minimum pressure drop and uniform strength. Priced and sold as each. 4 in. grooved end fitting Standard tee 16.8 FPM Branch, 6.7 FPM Run 1000 PSI Priced and sold as each Ductile iron conforming to ASTM A 536, Grade 65-45-12. Rust inhibiting paint - Color: ORANGE (standard). Ductile Pressure ratings of standard fittings conform to those of Fig. 7001 coupling. UL listed. FM approved. 1 Year warranty from the date of shipment.

Minimum Order: 10 long tons

Product Description Grooved rigid coupling 3/4 cast iron Coupling YN01UL/FM APPROVED Rigid Coupling: Ductile Iron, 4 in x 4 in Fitting Pipe Size, Grooved, Class 150 China grooved pipe fittings are a proven faster, easier, and safer method of joining pipe and are an economical alternative to welding, threading, or using flanges. There are two basic grooved coupling styles: Flexible grooved couplings/fittings and Rigid grooved couplings/fittings. Flexible grooved couplings/fittings allow a limited amount of angular movement. Rigid grooved couplings/fittings do not allow movement and can be used wherever immobility in the pipe joint is needed, like a flanged or welded joint. Product Overview What are the three types of rigid coupling? In Pipe fitting manufacturers, there are three main types of Grooved rigid coupling 3/4 cast iron Coupling YN01: sleeve, flanged rigid coupling and clamped. For commercial shafting, a rigid coupling may be a sleeve with the shafts pressed into each end or it may be a clamping sleeve. The sleeve on each shaft end may have an external flange with bolt holes. Grooved rigid coupling 3/4 cast iron Coupling YN01 couplings connect rotating members such as shafts and transmit torque and motion. Most rigid couplings are made of aluminum, steel, or stainless steel. Rigid materials examples include corrugated and paperboard boxes, plastic bottles and boxes, aluminum cans, and glass jars. Popular applications include cereal boxes, glass bottles of spirits, cans of soup, and laundry detergent bottles.

Minimum Order: 10 long tons

Product features 1. Translucent appearance; 2. Temperature resistance -200～+260℃; 3. The pipe and the body are sealed reliably, the sprayability is sensitive, the recovery is fast, and no residue flows out. It can be sprayed into the position of each container and is easy to clean; 4. The nozzle and bottle cap are formed at one time; 5. It can replace the volumetric flask to configure the standard solution: it can be controlled to add sample and water drop by drop. web: https://www.njbinglab.com Phone/Whatsapp/ Wechat :+8615805176994 Mail: rossguo@njbinglab.com

Minimum Order: 3 bushels

Installed on the high-speed machining center, single crystal diamond milling tool is a kind of ultra-precision machining tool, which is mainly used in the processing of nickel, copper etc. non-ferrous metals and non-metallic hard brittle materials such as optical glass, ceramics, and silicon wafers. Diamond milling tool is a professional tool for processing camera mold kernel runner, camera compound eye mold and micro structure groove. Single crystal diamond milling tools are available in different shapes, sizes, and tip geometries and here Litian Century can Provide: Single Crystal Diamond Ball Nose（Arc） Milling Tools Single Crystal Diamond End Milling Tools Advantages: Litian Century has the State-of-the-art equipment for both producing and measuring our diamond tools. Our technicians have been working with diamond for more than 20 years now. We are constantly innovating and driving the company years ahead of the competition. First-class Natural Diamond (ND) and Advanced Synthetic Diamond, both available, is the essential for perfect performance and durability of our Single crystal diamond milling tools. You can choose the suitable material according to your requirements. Take advantage of our innovations that will assure you are using the most efficient and reliable tools that eliminate errors and reduce production costs. https://www.ltctdiamonds.com/single-crys , tal-diamond-milling-tools/single- crystal-diamo , nd-milling-tools.html

Single crystal diamond turning tool is a kind of ultra-precision machining tool, which is mainly used in the processing of nickel, copper etc. Non-ferrous metals and non-metallic hard brittle materials such as optical glass, ceramics, and silicon wafers. Single crystal diamond turning tools can be classified in different ways, and here Litian Century can Provide: Single Crystal Diamond Arc Turing Tools Single Crystal Diamond Sharp Point Turning Tools Single Crystal Diamond Boring Tools Single Crystal Diamond Grooving Turning Tools Advantages: Litian Century has the state-of-the-art equipment for both producing and measuring our diamond tools. Our technicians have been working with diamond for more than 20 years now. We are constantly innovating and driving the company years ahead of the competition. First-class Natural Diamond (ND) and Advanced Synthetic Diamond are both available, which are essential for the perfect performance and the durability of our single crystal diamond turning tools. You can choose the suitable material according to your requirements. Take advantage of our innovations that will assure you can use the most efficient and the most reliable tools that eliminate errors and reduce production costs. 

Polish master machines are used to finely machine the copper cylinder for a fine surface finish degree. After the cylinder finished its fine machining, it can be installed in engraving machines for patter engraving. The most popular and advanced machines are the Polish master made in Switzerland Daetwyler company. Polish master tools, are precision diamond tools, which are installed on Polish master machines to process the copper layer on the cylinder. There are generally three cutters allocated in the Polish master machine—— Rough Cutter, Fine Cutter and Side Milling Tool. The rough cutter is used for rough machining copper surface of the cylinder, the fine cutter is used for fine machining and the side milling tool is for profile machining to the end of the cylinder. The common polish master machines are 13# and 21# and their difference is the revolution speed. 13# Polish master machine is low speed and 21# polish master machine is high speed. Cylinder Preparation Tools Advantages: We found the possibility to examine the quality of our Polish master cutters to meet the highest technical requirements. Blade Test Our Polish master tools are controlled very strictly with our high-resolution optical microscope. Only a perfect straight cutting edge can guarantee the machining quality of rough and fine cutter. Verticality Test Place the rough cutter in the measuring apparatus for blade straightness and verticality to the standard axis, this is to guarantee the surface waviness of machined cylinder. Parallelism Test Place the fine cutter in the measuring apparatus for blade straightness and parallelism to the standard plane, this is to guarantee the surface waviness of machined cylinder. More about Litian Century Diamond Tools

An OHIO engraving stylus, also called OHIO diamond stylus, is a precision tool used in the rotogravure printing process for the rotogravure industry. It is a very small, pointed tip made of diamond, which is renowned for its hardness and durability. Diamond styli are available in different shapes, sizes, and tip geometries to suit specific rotogravure applications and printing requirements. We have the full kinds of Engraving stylus for HELL gravure systems, OHIO gravure systems and MDC gravure systems. 20+ years' experience, strongly production capacity and first-class material make our engraving stylus can meet the engraving requirements of all kinds of products, especially for the high - grade cylinder engraving. OHIO Engraving stylus Series: OHIO GS engraving stylus, OHIO 700 engraving stylus, OHIO 800 engraving stylus.   Applicable Machine: OHIO GS Engraving stylus is suitable for electronic engraving machine, just like: M850, GS850, GS+, GS1315, GS2215, GS3615, Gravo star HS, and etc. OHIO M800 Engraving stylus is suitable for electronic engraving machine, just like: M800 series, M820 and etc. OHIO B700 Engraving stylus is suitable for electronic engraving machine, just like: B700 series, B720 and etc. Engraving stylus Degrees: The common degree range is from 90° to 160°, and other degrees can be customized. What makes us unique is that we use different colors to distinguish angles. https://www.ltctdiamonds.com/