Offers to Sell

ProductDescription:         Sodium Dimethyl Dithiocarbamate can be used as a terminator for emulsion polymerized styrene butadiene rubber, styrene butadiene rubber latex, industrial fungicide, metal precipitant, vulcanization promoter for rubber products, and agricultural insecticide.         This product is a disinfectant and can be made into 1% medicated soap for use. Also used as a polymerization termination agent for butadiene styrene rubber. Intermediate of rubber promoter TMTD and pesticide Fumeishuang. Application:        Industrial fungicides, metal precipitants, vulcanization accelerator for rubber products Storage:        In accordance with local regulations, store in original container protected from direct sunlight in a dry, room temperature area. Keep container tightly closed and sealed until ready for use.

Minimum Order: 1 bags

Product Description:         PMA-1 is a Pour Point Depressant. When you add a small amount, you can greatly change the crystalline form of paraffin in the oil, change the interface state and rheological properties of the system, reduce the pour point and viscosity of crude oil and oil, improve the quality and efficiency of crude oil in oil extraction, gathering, storage and other operations, improve the usability of oil, widen the cutting width of fractions during crude oil refining, and improve economic benefits and resource utilization. Application:         PMA-1 features high efficiency & light color , and has good pour point stability, good low temperature performance. Used for engine oil, gear oil, hydraulic oil, etc.  0.3%-0.5% Storage:     In accordance with local regulations, store in original container protected from direct sunlight in a dry, clean, well ventilated room temperature area. The highest handling temperature should not exceed 75ºC; long-term storage temperature should not exceed 45 ºC. Keep container tightly closed and sealed until ready for use.

Minimum Order: 1 bags

Product Description:         Corrosion inhibitor TC65 mainly used as a precursor for dyes, pigments, and fluorescent whitening agents.         It is widely used in industries such as textiles, plastics, petroleum, and paper to improve the whiteness and brightness of products. Application:         Preservative and Antiseptic in cosmetics or skin drugs, ≤0.1% Benefits: High performance & Healthy, Safe! Storage: In accordance with local regulations, store in original container protected from direct sunlight in a dark,dry, cool area. Keep container tightly closed and sealed until ready for use.

Minimum Order: 1 bags

Product Description:        C1214 is an alkaline compound that can react with acids to form salts.Soluble in water and common organic solvents. Application:      Surfactant: C12-14-tert alkylamine is a non-ionic surfactant commonly used in household cleaning agents, detergents, and industrial cleaning agents.      Electrostatic inhibitor: It has the ability to resist static electricity, and C12-14-tert alkylamine can be used as an antistatic agent for products such as plastics, fibers, and paints. Storage: In accordance with local regulations, store in original container protected from direct sunlight in a dry, cool and well-ventilated area. Keep container tightly closed and sealed until ready for use.

Minimum Order: 1 bags

Product Description:       Petrolem Rz-W40 is an extreme pressure and friction resistant agent with good extreme pressure characteristics, which can be used in various metal working fluids. Application:      Petrolem Rz-W40 is excellent EP/AW additive with high active sulfur, used for varied metalworking oils, gear oil, lubricant grease. But not recommended for copper, aluminium metalworking. 1-5% Benefits:    High activated sulfur    Low color, low viscosity, good oil dissolution. Storage:    In accordance with local regulations, store in original container protected from direct sunlight in a dry, cool and well-ventilated area. Keep container tightly closed and sealed until ready for use.

Minimum Order: 1 bags

Product Description:       Runsol® AO15S  is a non-ionic surfactant, usually appearing as a colorless or light yellow liquid. It has good emulsifying and dispersing properties and can stabilize lotion between water and oil. Application:         Runsol® AO15S is a nonionic surfactant with middle length C12-C14 carbon chain, it features lower odourless , high biodegradable ,good chemical stability and narrower gel range. Widely used in Textile printing and dyeing and leather industry,Agrochemical industry,Daily chemical and industrial cleaning, Metalworking fluids, Plastic & Coating industry, Paper and pulp industry etc. Benefits: (1)Fast dissolution in water (2)Good compatibility with other surfactants (3)Good chemical stability (4)Environmental friendliness Storage:      In accordance with local regulations, store in original container protected from direct sunlight in a dry, cool and well-ventilated area. Keep container tightly closed and sealed until ready for use.

Minimum Order: 1 bags

Application:  Runlube 8315 is an extreme pressure additive for lubricant oils. It has low viscosity. Used well in cutting oil, drawing oil etc. Incompatible with ZDDP, compatibility test is recommended before use. Storage:  In accordance with local regulations, store in original container protected from direct sunlight in a dry, cool and well-ventilated area. Keep container tightly closed and sealed until ready for use. Package: 200kg/drum with pallet

Minimum Order: 1 bags

　　The VA water seals are vital components in various industrial applications, providing an essential barrier to prevent fluid leaks and ensure the smooth operation of machinery. Among the different types of water seals, VA water seals are known for their specific features that make them particularly effective in certain scenarios. 　　VA water seals are typically manufactured using two types of materials: 　　Fluoroelastomer: Suitable for a temperature range of -20℃ to +250℃, compatible with mineral oils, synthetic oils, acids, and bases. 　　Rubber-Plastic (RP): Suitable for -40℃ to +100℃, and effective with mineral oils, water, emulsions, and other environments. 　　These sealing devices exhibit several significant advantages: 　　Metal-Free Construction: Made of pure rubber, simplifying design and installation processes. 　　Reduced Design Constraints: It eliminates stringent requirements on the hardness and precision of the shaft surface, easing fabrication challenges. 　　Easy Installation and Maintenance: The seal can be conveniently installed and removed, facilitating maintenance. 　　Low Friction Loss: With lower surface contact pressure, the friction force is minimized, extending the service life. 　　Dust Prevention: Effectively prevents the entry of contaminants, serving dual functions of sealing and dust protection. 　　VA water seals offer a reliable sealing solution for the smooth operation of metallurgical machinery through their advanced design and material selection.

Minimum Order: 500

Application and recommended treatment dosage : PMA-1 features high efficiency & light color , and has good pour point stability, good low temperature performance. used for engine oil, gear oil, hydraulic oil, etc. 0.3%-0.5% Storage: In accordance with local regulations, store in original container protected from direct sunlight in a dry, clean, well ventilated room temperature area. The highest handling temperature should not exceed 75ºC; long-term storage temperature should not exceed 45 ºC. Keep container tightly closed and sealed until ready for use. Package:  180kg/drum

Minimum Order: 1 bags

Application &typical recommended dosage: Rz-W42 is a water-soluble metal deactivator which can be used in all types of water based fluids , high effect when with pH > 7, especially strengthen corrosion inhibiting effect with TC series. 0.1-0.3% Benefits: Easy to handle liquid Suitable replacement for benzotriazole BTA and tolutriazole TTA Protects yellow metals and cobalt alloys from corrosion Storage: In accordance with local regulations, store in original container protected from direct sunlight in a dry, cool and well-ventilated area. Keep container tightly closed and sealed until ready for use. Package:  200kg/drum with pallet

Minimum Order: 1 bags

This single honing tools als called as one time honing tool,only for some accuary honing requirement,can have several of tool together used in process,then you will get finally diameter you want. Diamond honing tools are divided into adjustable fixed honing knives and adjustable floating honing knives. They are an advanced tool for processing various high-precision workpieces. They have high cutting efficiency, long working life, high precision and good surface roughness. Features. According to the different diamond particle size, it can be used for rough hinge, fine hinge and fine grinding. The product is suitable for inner hole honing and cutting of refrigerator, air conditioner compressor cylinder hole, piston hole, nozzle oil pump, hydraulic valve, motorcycle, automobile engine block, gear, powder metallurgy parts, super hard parts, etc. Single Pass Diamond Honing Tools, Honing Mandrels for Progressive Honing, Single stroke Honing Honing improves and guarantees bore geometry accuracy and finish after operations such as machining, heat treating or chucking. Corrects the following conditions: Out-of round, Taper, Boring Marks, Chatter Bell Mouth, Undersize, Barrel Shapes, Rainbow, Misalignment, Waviness. Additionally, cuts all materials, ferrous and nonferrous Progressive Honing The progressive honing sequence is very simple and does not require the presence of any skilled operators, it consists of a number of vertical honing tools, combined with a horizontal table which index/rotates under the spindles. Progressive Honing Sequence Each honing tool is preset to a progressively larger diameter, and as the workpiece passes through the machine's cycle it has its diameter increased in size by each spindle in turn. Each honing tools passes through the bore one single time only. At each pass the tool removes a specific quantity of material and the bore diameter is progressively increased, calibrated and finally finished step by step. According to the material, the stock removal, the surfance finish and the required geometry, the honing range can include 1 to more than 10 honing tools. Constant quality of the bore Cylindricity<0.01 Surface finish<0.05 Short cylcle time Process reliability, Low workpiece cost. Application areas: Hydraulic valves, distribution valves, Gears, ABS, brake cylinder, supercharger, rocker arms, connecting rod, crankcase etc.

Minimum Order: 1 bags

Injector Control Valve Plate 505# Tina #Injector Control Valve Plate 505## #Common Rail Fuel Injector Control Valve F00V C01 007# #Injector Valve Set F00V C01 042# #Fuel Injection Nozzle 0 433 172 027# Tina Chen Whatsapp: 86-133/869/01379 China Lutong to be a supplier ( Passed ISO9001:2015 )for diesel fuel injection parts, Such as common rail nozzles,VE, Lucas rotor head, elements, diesel injectors etc. CERTIFICATION ISO9001:2015 RÉUSSIE. Our major Diesel Parts products to the market: - Common Rail Nozzle - Common Rail Injector - Common Rail Valve Sets - Head Rotor for VE,DPA,DPS,DP200 - Injection Pump Parts - Fuel Injector Nozzle - Diesel Pump Plunger - Delivery Valve

Minimum Order: 10 long tons

Diesel Control Valve F00V C01 001 Tina #Injector Control Valve Plate 505## #Common Rail Fuel Injector Control Valve F00V C01 007# #Injector Valve Set F00V C01 042# #Fuel Injection Nozzle 0 433 172 027# Tina Chen Whatsapp: 86-133/869/01379 China Lutong to be a supplier ( Passed ISO9001:2015 )for diesel fuel injection parts, Such as common rail nozzles,VE, Lucas rotor head, elements, diesel injectors etc. CERTIFICATION ISO9001:2015 RÉUSSIE. Our major Diesel Parts products to the market: - Common Rail Nozzle - Common Rail Injector - Common Rail Valve Sets - Head Rotor for VE,DPA,DPS,DP200 - Injection Pump Parts - Fuel Injector Nozzle - Diesel Pump Plunger - Delivery Valve

Minimum Order: 10 long tons

Common Rail Injector Valve Assembly FOOV C01 035 Tina #Injector Control Valve Plate 505## #Common Rail Fuel Injector Control Valve F00V C01 007# #Injector Valve Set F00V C01 042# #Fuel Injection Nozzle 0 433 172 027# Tina Chen Whatsapp: 86-133/869/01379 China Lutong to be a supplier ( Passed ISO9001:2015 )for diesel fuel injection parts, Such as common rail nozzles,VE, Lucas rotor head, elements, diesel injectors etc. CERTIFICATION ISO9001:2015 RÉUSSIE. Our major Diesel Parts products to the market: - Common Rail Nozzle - Common Rail Injector - Common Rail Valve Sets - Head Rotor for VE,DPA,DPS,DP200 - Injection Pump Parts - Fuel Injector Nozzle - Diesel Pump Plunger - Delivery Valve

Minimum Order: 10 long tons