Offers to Sell

A transmission, commonly referred to as a gearbox, is a mechanical system of gears and gear trains that transmit the power produced by the engine to the wheels. The main of eight parts of automotive transmission includes clutch, torque converter, planetary gear parts, automatic transmission oil pump, transmission oil pan, brake band, transmission brake band, transmission output shaft. We can manufacture all kinds of automotive transmission parts according to your specified drawing.

Minimum Order: 1 bags

Automobile braking system is a system that uses friction to slow down or stop a vehicle. When we apply brake, brake shoe & brake drum are come in contact with each other, then due to the frictional resistance, kinetic energy of brake drum is converted into the heat & motion of the vehicle gets slow down or it gets stopped. There are six main automobile braking system, mechanical brake, hydraulic brake, pneumatic or air brake, electrical brake, vacuum brake, magnetic brake. Main material: Cast iron, cast steel. We can manufacture all kinds of parts for automobile braking system parts according to your specified drawing.

Jinggong Cast Iron Base plates / Bed Plates, are one of the modern industrial gauges. It is suitable for a variety of inspection, precision measurement of the reference plane. Used for mechanical testing benchmarks of machine tools, dimensional accuracy or shaped inspect parts for deviation, and as close crossed, is an indispensable basic tool in the machinery manufacturing. Cast Iron Base Plates is widely used in machining, tool shop, machine (the seizure) repair workshop, large equipment base, measuring rooms and precision machining of the inspection, measurement and grinding, and can accurately measure, test workpiece flatness, straightness and tolerance of the angle. Specification: Size (long x wide in mm) 2000 x 1250 2000 x 1750 3000 x 3000 2000 x 1500 2500 x 2000 3500 x 2500 2000 x 2000 2500 x 2500 4000 x 1000 2400 x 1200 3000 x 1000 4000 x 2000 2500 x 1000 3000 x 1250 5000 x 1000 2500 x 1250 3000 x 1500 5000 x 2000 2500 x 1500 3000 x 1600 6000 x 1000 2500 x 1600 3000 x 2000 6000 x 2000 Customized sizes can also be manufactured as per customer’s requirement. Standard plates have the Brinell hardness of approx. 180 – 200HB and the tensile strength of approx. 260 – 300 N/mm2. Flatness accuracies offered in Grade I, II or III as per DIN876. All standard T-Slots sizes 18, 22, 28, 36 or 42 can be manufactured, with fits in terms of DIN 650 ranging from H7 to H12. T-slots in special or intermediate sizes can be customized. The distance between T-slots in standard plates is usually 150, 200, 250 or 300 mm. The distances between clamping options and the T-slots can be according to custom specification to suit customer requirements.

Minimum Order: 1 bags

Jinggong Box Table is made from high-strength grey cast iron with cast clamp slots, which allows very high loading and is suitable for use on radial drills or similar machines. The clamping surfaces are exactly machined to DIN 876/111, II or I flatness accuracy. The working surfaces have T-slots to DIN 650 on request. Type JGBT-B Material: grey cast iron GG25 (HT-250); Clamping and base surface machined to DIN 876/II, DIN876/III; Clamping surfaces are rectangular; Edges machined rectangular; Two sides with T-slots according to DIN 650; With reinforcing ribs; Sizes and dimensions can be on your request.

Minimum Order: 1 bags

Jinggong T-slot Base Plates (Floor Plates, Bed Plates or Clamping Plates) are made from high-density cast iron. These plates allow for a wide range of ‘work-holding’ solutions. Base Plates / Bed plates / T-slotted floor plates find application in engineering and manufacturing industries as precision bases for layout, marking, inspection and assembly work. They also find application for large fixtures, special tooling and production set ups. It also allows for an easy set-up and mounting for precision welding. Standard plates have a Brinell hardness of between 180 – 200 HB and a tensile strength of 260 – 300 N/mm2. Surface machined to DIN876 and T-slots machined to DIN650. Standard T-slot sizes 22, 28, or 36 can be manufactured, with fits ranging from H 7 to H 12. The popular distance between T-slots is 200 or 250 mm. T-slots in special or intermediate sizes can be provided. The design, dimensions and load capacity of the plates can be adapted to the size and weight of the workpieces to be held. Pls. quote. Standard sizes for reference: No. Sizes (mm) Surface accuracy (according to DIN876) 1 2000*2000*300 I/II/ , III 2 2500*2000*300 I/II/III& , lt; , br> 3 3000*2000*300 I/II/III < , br>4 3500*2000*300 I/II/III 5 , 4000*2000*300 I/II/III 6 , 4500*2000*300 I/II/III 7 , 5000*2000*300 I/II/III 8 5500 , *2000*300 I/II/III 9 6000*200 , 0*300 II/III 10 6500*2000*300 , II/III 11 7000*2000*300 & , lt; , br>II/III 12 8000*2000*300 II , /III Other sizes and surface accuracy on request! Large plates can be connected by single piece as following: L(mm) W(mm) 2000 2500 3000 3500 4000 3500 3500 2000 , 1250+1250 1500+1500 1500+2000 2000+2000 4500 4500 5500 , 5500 6500 6500 7500 7500 8500 4000+4500 950 , 0 4000+5500 10500 4000+6500 11500 4000+7500 12500 4 , 000+4000+4500 13500 4500+4500+4500 14500 4000+4000+6500 15500 , 4000+4000+7500 16500 4500+4500+7 , 500 17500 5500+5500+6500 1850 , 0 5500+6500+6500 19500 6500+6 , 500+6500 20500 6500+6500+7500

Minimum Order: 1 bags

Inspection content of casting blank 1. Casting defects Common casting defects of casting blanks include: porosity, shrinkage cavity, shrinkage porosity, slag inclusion, sand hole, crack, cold partition, drape, burr, sand sticking, bulging sand, insufficient pouring, damage, size deviation, deformation, wrong box , wrong core, eccentric core, lifting box, etc. These defects will restrict the use of the blanks and even cause scrap. 2. Casting inspection content The inspection content of castings includes casting process inspection and finished casting inspection. (1) Inspection of casting process. In the inspection content of the blank, the inspection of the blank procedure is carried out during the casting procedure, and the machining personnel only make general understanding requirements. The inspection items for the casting process are as follows: a: Inspection of modeling materials; b: Model test; c: Inspection of shape and core; d: Inspection of the packing; e: Pouring inspection; f: Inspection of cleanup. (2) Inspection of finished castings. The inspection of finished castings includes: inspection of related technical conditions, surface quality inspection, geometric dimension inspection, etc. a: Inspection of relevant technical conditions. Including the inspection content of the chemical composition and mechanical properties of the casting. The inspection of technical conditions such as mechanical performance inspection and metallographic and chemical composition inspection must be carried out in accordance with relevant national standards (here omitted). b: Surface quality inspection. The inspection of the casting blanks by the front-line personnel of machining production during the process is mainly to check the appearance of casting defects (such as whether there is trachoma, sand hole, looseness, insufficient pouring, casting cracks, etc.); and whether the blank machining allowance is Meet the inspection of processing requirements.

Minimum Order: 1 bags

T-Slotted Floor / Bed Plates / Base Plates / Fixed Plates - Overview These plates are widely used in engineering industries as rigid bases for layout, marking, inspection, assembly work, large fixtures, special tooling and production set ups, for mounting jobs for precision welding or for carrying out machining operations like drilling, boring etc. and also as test beds for mounting engines, large machines, transmission or other industrial equipment. T-Slotted Floor / Bed Plates / Base Plates / Fixed Plates – Main features - Material: GG20-GG30 (HT-200-HT-300). - Standard: flatness according to DIN876 and T-slots according to DIN650. - Specification: 750x1000-3000x8000mm or customize. - Brinell hardness is between 180 -200. - The tensile strength varies between 260 -300 N/mm². - Rib structure achieves maximum stability of the plates. Standard sizes for reference: No. Sizes (mm) Surface accuracy (according to DIN876) 1 2000*2000*300 I/II/ , III 2 2500*2000*300 I/II/III& , lt; , br> 3 3000*2000*300 I/II/III < , br>4 3500*2000*300 I/II/III 5 , 4000*2000*300 I/II/III 6 , 4500*2000*300 I/II/III 7 , 5000*2000*300 I/II/III 8 5500 , *2000*300 I/II/III 9 6000*200 , 0*300 II/III 10 6500*2000*300 , II/III 11 7000*2000*300 & , lt; , br>II/III 12 8000*2000*300 II , /III Other sizes and surface accuracy on request! Large plates can be connected by single piece as following: L(mm) W(mm) 2000 2500 3000 3500 4000 3500 3500 2000 , 1250+1250 1500+1500 1500+2000 2000+2000 4500 4500 5500 , 5500 6500 6500 7500 7500 8500 4000+4500 950 , 0 4000+5500 10500 4000+6500 11500 4000+7500 12500 4 , 000+4000+4500 13500 4500+4500+4500 14500 4000+4000+6500 15500 , 4000+4000+7500 16500 4500+4500+7 , 500 17500 5500+5500+6500 1850 , 0 5500+6500+6500 19500 6500+6 , 500+6500 20500 6500+6500+7500

Minimum Order: 1 bags

Jinggong Cast Iron T-slotted Floor Plates are professional designed and produced, have high rigidity and stability, can be manufactured according to the wishes of our customers. It’s used for multiple applications, from milling machines and boring machines to machine centers. Standard sizes range is from 100mm*100mm to 3000mm*8000mm.

Minimum Order: 1 bags

Jinggong Cast Iron T Slotted Angle Plate has exported to customers in the USA, Canada, Italy, Belgium, the Netherlands, etc. with the main technical information: 1. Cast iron, nodular iron or steel made angle plates, used as workholding fitted on floor type horizontal boring mills. 2. GG-25 grey cast iron made or other materials made angle plates, twice annealing heat-treatment to eliminate internal stress to maintain high precision free from distortion in the long time operations. 3. T-slots as per DIN650 specifications or other types of slots defined by customers can be machined on these angle plates. 4. Flatness accuracy as per DIN876 specifications or specified by customers. 5. Any sizes can be manufactured according to the user’s r drawing or detailed requirement. 6. The picture shows the angle plate 1500x800x800mm with material GG25 and T slots 22H12.

Minimum Order: 1 bags

Jinggong Cast Iron T-slot Base Plates are used in various inspection works and usually as the base plate in precise testing. Check the size precision or geometric tolerances of the components, then marking; they are the fundamental tools in machinery manufacture. l Material: GG20-GG30 (HT-200-HT-300). l Standard: flatness according to DIN876 and T-slots according to DIN650. l Specification: 750x1000-3000x8000mm or customize.

Minimum Order: 1 bags

The Cast Iron Clamping Plates are mainly used as machining working surface of machine tools. Some holes and T-slots on the top surface of plates for fixing the work piece and clearing the scrap iron during the processing. The raw material is the high-strength cast iron GG20-GG30 (HT200-HT300). The size range is from 100mm*100mm to 3000mm*8000mm. Larger one can be made according to the drawing. The work surface can be processed V-shaped, T-shaped, U-groove as your request.

Minimum Order: 1 bags

Jinggong Cast Iron Angle Plates with a box-shaped cast design are required for almost all boring and milling machines to fix workpieces in a vertical position. The clamping surfaces of the standard angle plates have been machined in accordance with DIN876 standard and provided with T-slots in accordance with DIN650. The bases of the angle plates have clamping slots and drill-holes adjusted to the clamping options of the machine table. Dimensions and T-slots size can be varied according to your requirements.

Minimum Order: 1 bags

Jinggong Cast Iron T Slot Plate is mainly used for fixing the workpieces, they’re the basic workbench for the workers in workshop or lab to adjust, assemble and repair equipments. l Material: GG20-GG30 (HT-200-HT-300). l Standard: flatness according to DIN876 and T-slots according to DIN650. l Specification: 750x1000-3000x8000mm or customize. l T-slots (any other accessories are available according to your requirement, like V, straight-shaped slots and tapped holes, long holes, grid lines, etc.)

Minimum Order: 1 bags

Why are T-slots on T-slots platform easy to error? The T-slots platform is often very prone to errors in the T-slot planed by the platform due to operating errors. The following four are the main reasons. cast iron T-slots platform 1. The groove of the T-slots platform is not parallel to the side of the platform working surface. The main reason is that the cast iron platform is not aligned according to the markings during installation, or the cast iron platform is displaced during processing. 2. The top surfaces of the left and right grooves of the T-slot are not on the same plane. The reason is that the machine tool setting is not accurate. The width of the main cutting edge of the left and right variable cutters is not the same when the groove is processed in one pass. 3. The width of the left and right grooves of the T-slot platform is different. The main reason is that the slot direction is not well mastered. 4. There is a shallow groove in the middle of the T-slots bottom surface of the T-slots platform. The reason is that the tool is not well connected when processing the bottom surface of the groove, or the planing is too deep when processing the right-angle groove. Jinggong Measuring Tools Producing Co., Ltd is specializing in manufacturing and exporting all kinds of cast iron products，especially for cast iron floor plates, cast iron surface plates, cast iron clamping plates, cast iron angle plates, cast iron box table and other machine tool castings. Our engineering enables us to design the cast iron plates and tables according to DIN Standards, Indian Standards and Chinese Standards, machining by CNC machine tools and install in the world market.

Minimum Order: 1 bags