Offers to Sell

Typical Capacity:230Ah 3.2V Energy density 179.1wh/kg Volume density 378.6Wh/L cycle life more than 3500 cycle @80% SOC

Minimum Order: 200

● High-level automatization manufacture equipment used, ensuring cell parameters consistency. ● Self-developed ventilation valve with high airtightness & safety performance; ● Low Cell inner resistance, high discharge C rate performance. ● Customization service offered. ● Long cycle life, 80% nominal capacity left after 3500 cycles @1C/1C charge & discharge. ● Full sets of certificates available, ISO 14000, TS16949, ROHS, TUV, UL, UN. ● Product liability insurance covered.

Minimum Order: 200

● High-level automatization manufacture equipment used, ensuring cell parameters consistency. ● Self-developed ventilation valve with high airtightness & safety performance; ● Low Cell inner resistance, high discharge C rate performance. ● Customization service offered. ● Long cycle life, 80% nominal capacity left after 3500 cycles @1C/1C charge & discharge. ● Full sets of certificates available, ISO 14000, TS16949, ROHS, TUV, UL, UN. ● Product liability insurance covered.

Minimum Order: 200

Prestressing Strand Features Prestressing Strand Huayongxin (also referred to as Prestressed Concrete Steel Strand), is made from the stranding of seven wires of high carbon steel wire rod, and mainly used as auxiliary reinforcing strand for concrete structures. It has the following characteristics and advantages: High tensile strength and low relaxation Higher fatigue, higher breaking loads and corrosion resistance Better performance at elevated temperature Stable modulus of elasticity High bonding force Reduce distortion and construction weight Established in 2004 in Tianjin, close to Tianjin port, Huayongxin cover an area of 120,000sqm, have 4 workshops, 2 laboratories, 8 PC wire production lines and 4 PC strand production lines with each line production capacity at 3000 tons per month. PRODUCT PROPERTIES Prestressing Strand Properties Product Name Prestressing Strand Huayongxin Type Bonded & Unbonded Materials SWRH82B Diameter 1x7 Wire 9.53mm, 12.7mm, 15.24mm Tensile Strength 1860Mpa Relaxation (%) ≤2.5 Elongation (%) ≥3.5 Standard ASTM A 416, GB/T5224-2003, BS5896, JISG3536-88 Coil Dimension & Weight Inner Diameter: 800m Outer Diameter: 1400mm Width: 750mm Coil Weight: 2.5-3.2MT/Coil Packing Coils wrapped by 8 steel strips → Fully wrapped with waterproof & P.P woven sheet → Fixed with wooden pallet → Strapped at 8 places with steel strips Prestressing Strand Application Prestressing Strand is mainly used in prestressed and post-tension concrete structure, such as post-tension slab, large-span bridges on railway and highway, overhead crane beam, prefabricated bridge girder, multi-storey industrial buildings, stadiums, rock-soil anchoring project, coal mines, etc. HUAYONGXIN Our Advantages Extensive experience in exporting. Professional team to manage production and control product quality. Three rust-preventive measures taken to guarantee no rust caused. Special designed wooden pallet used to avoid any damage to the container during offloading. Equipped with advanced testing facilities and abide by the principle of testing each coil produced.

Minimum Order: 25

Steel Strand (also referred to as Prestressed Concrete Steel Strand), is made from the stranding of seven wires of high carbon steel wire rod, and mainly used as auxiliary reinforcing strand for concrete structures. https://www.hyxpcwire.com/product-pc-strand.ht , ml It has the following characteristics and advantages: High tensile strength, low relaxation It has high fatigue, fracture load and corrosion resistance It performs better at high temperatures Stable modulus of elasticity The high binding force Reduce deformation and construction weight PRODUCT PROPERTIES Steel Strand Huayongxin Properties Product Name Steel Strand Type Bonded & Unbonded Materials SWRH82B Diameter 1x7 Wire 9.53mm, 12.7mm, 15.24mm Tensile Strength 1860Mpa Relaxation (%) ≤2.5 Elongation (%) ≥3.5 Standard ASTM A 416, GB/T5224-2003, BS5896, JISG3536-88 Coil Dimension & Weight Inner Diameter: 800m Outer Diameter: 1400mm Width: 750mm Coil Weight: 2.5-3.2MT/Coil Packing Coils wrapped by 8 steel strips → Fully wrapped with waterproof & P.P woven sheet → Fixed with wooden pallet → Strapped at 8 places with steel strips Properties Application Steel Strand Huayongxin is mainly used in prestressed and post-tension concrete structure, such as post-tension slab, large-span bridges on railway and highway, overhead crane beam, prefabricated bridge girder, multi-storey industrial buildings, stadiums, rock-soil anchoring project, coal mines, etc. HUAYONGXIN Advantages Extensive experience in exporting. Professional team to manage production and control product quality. Three rust-preventive measures taken to guarantee no rust caused. Special designed wooden pallet used to avoid any damage to the container during offloading. Equipped with advanced testing facilities and abide by the principle of testing each coil produced.

Minimum Order: 25

PC Strand Bonded Huayongxin PC Strand (also referred to as Prestressed Steel Strand), is made from the stranding of seven wires of high carbon steel wire rod, and mainly used as auxiliary reinforcing strand for concrete structures. It has the following characteristics and advantages: High tensile strength and low relaxation It has high fatigue, fracture load and corrosion resistance It performs better at high temperatures Stable modulus of elasticity High bonding force Reduce distortion and construction weight PRODUCT PROPERTIES Product Name Prestressed Steel Strand Huayongxin Type Bonded & Unbonded Materials SWRH82B Diameter 1x7 Wire 9.53mm, 12.7mm, 15.24mm Tensile Strength 1860Mpa Relaxation (%) ≤2.5 Elongation (%) ≥3.5 Standard ASTM A 416, GB/T5224-2003, BS5896, JISG3536-88 Coil Dimension & Weight Inside diameter: 800 meters Outside diameter :1400 mm Width :750 mm Weight of coil :2.5 -- 3.2 tons/coil Packing Coiling 8 steel belts → Waterproof, P.P braided plate all wrapped → Fixed wooden pallet → Strapping 8 steel belts Application PC Strand is mainly used in prestressed and post-tension concrete structure, such as post-tension slab, large-span bridges on railway and highway, overhead crane beam, prefabricated bridge girder, multi-storey industrial buildings, stadiums, rock-soil anchoring project, coal mines, etc. Our Advantages Rich export experience. A professional team manages production and controls product quality. Adopt three kinds of anti-rust measures to ensure no rust. The specially designed wooden pallet can avoid the damage to the container when unloading. Equipped with advanced testing equipment, and strictly abide by the production of each roll of the principle of testing.

Minimum Order: 25

PC Wire Plain Surface Huayongxin PC Wire (also referred to as Prestressed Concrete Steel Wire) is high tensile, low relaxation steel wire made from high-carbon steel and widely used for prestressed and post-tensioning technology in various shapes of PC structures. It has the following characteristics and advantages: High tensile strength and low relaxation More bonding stress between wire and concrete Stable modulus of elasticity PRODUCT PROPERTIES Product Name PC Wire Huayongxin Type of Surface Spiral Ribbed, Indented, Plain Materials SWRH82B Diameter 4.0mm, 4.8mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm, 9.0mm Tensile Strength 1470Mpa-1770Mpa Relaxation (%) ≤2.5 Elongation (%) ≥3.5 Standard ASTM A 421, GB/T5223, BS5896, JISG3536, and required standard. Packing Packed in coils (around 700-1300kg/coil). Each coil is strapped by steel bands at 8 places, fully wrapped with anti-rust plastic & PP woven sheet. Application PC wire has the characteristics of high tensile strength and low relaxation. It is widely used in the production of prestressed concrete pole, PHC pile, large railway and highway bridge, building truss, crane beam, industrial and civil precast concrete slab, wall slab, power station and so on. Our Advantages Extensive experience in exporting. Professional team to manage production and control product quality. Equipped with advanced testing facilities and abide by the principle of testing each coil produced.

Minimum Order: 25

PC Wire (also referred to as Prestressed Concrete Steel Wire) is high tensile, low relaxation steel wire made from high-carbon steel and widely used for prestressed and post-tensioning technology in various shapes of PC structures. It has the following characteristics and advantages: High tensile strength and low relaxation The bond stress between steel wire and concrete increases Stable modulus of elasticity We are high carbon steel PC Wire supplier, Indented PC Wire and high carbon steel PC Wire all can we supply. Warmly welcome new and old customers to visit and patronize! https://www.hyxpcwire.com/product-pc , -wire-indented.html PRODUCT PROPERTIES Product Name PC Wire Huayongxin Type of Surface Spiral Ribbed, Indented, Plain Materials SWRH82B Diameter 4.0mm, 4.8mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm, 9.0mm Tensile Strength 1470Mpa-1770Mpa Relaxation (%) ≤2.5 Elongation (%) ≥3.5 Standard ASTM A 421, GB/T5223, BS5896, JISG3536, and required standard. Packing Packed in coils (around 700-1300kg/coil). Each coil is strapped by steel bands at 8 places, fully wrapped with anti-rust plastic & PP woven sheet. Application PC Wire is characterized with high tensile strength and low relaxation. It's widely used in production of prestressed spun concrete poles, PHC Piles, in construction of large scale railroad, high-way bridges, building trusses, overhead crane beams, industrial and civil prefabricated concrete slabs, wall board, power station, etc. Our Advantages Extensive experience in exporting. Professional team to manage production and control product quality. Equipped with advanced testing facilities and abide by the principle of testing each coil produced.

Minimum Order: 25

Prestressed Concrete Steel Wire Spiral Ribbed Huayongxin PC Wire (also referred to as Prestressed Concrete Steel Wire) is high tensile, low relaxation steel wire made from high-carbon steel and widely used for prestressed and post-tensioning technology in various shapes of PC structures. Has the following characteristics and advantages: High tensile strength and low relaxation More bonding stress between wire and concrete Stable modulus of elasticity Product Name PC Wire(Huayongxin Prestressed Concrete Steel Wire) Type of Surface Spiral Ribbed, Indented, Plain Materials SWRH82B Diameter 4.0mm, 4.8mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm, 9.0mm Surface treatment Uncoated prestressed steel wire, prestressed epoxy coated steel wire and galvanized prestressed steel wire. Tensile Strength 1470Mpa-1770Mpa Relaxation (%) ≤2.5 Elongation (%) ≥3.5 Standard ASTM A 421, GB/T5223, BS5896, JISG3536, and required standard. Packing Volume (about 700-1300kg/ volume). Each roll is bound with steel tape at 8 places and fully wrapped with rust-proof plastic and PP braided sheet. PC Wire Application                                                                                                               PC Wire is characterized with high tensile strength and low relaxation. It's widely used in production of prestressed spun concrete poles, PHC Piles, in construction of large scale railroad, high-way bridges, building trusses, overhead crane beams, industrial and civil prefabricated concrete slabs, wall board, power station, etc. HUAYONGXIN Advantages                                                                                                                                                                                                         Professional team to manage production and control product quality. Equipped with advanced test equipment, and comply with the principle of testing each coil produced. Rich export experience.

Minimum Order: 25

Location: China Business Type: Manufacturer, Exporter Brands: BAINA Certificate: ISO9001;CE;WRAS;GSG;National Torch Program Certificate Terms of payment and delivery: 30% down payment;70% before shipment/FOB CIF Minimum order quantity: 1 set Price: Consultation Packing details: Wooden pallet Delivery time: 1-4 months Payment method: T/T L/C Mould name 12 cavity preform mould for M70 Neck 49g Preform Mould cavity 12 cavity Neck finish M70 Neck finish Preform weight 49g Insert materials ASSAB FS136/Purpose made 632 Mould plate 4Cr13/P20（Preharden） Hot plate H13（Preharden） Heating coil Rotfil from Italy/Hotset from Germany Copper nozzle Beryllium bronze From Italy Insulator From USA DU PONT Suitable injection molding machines Husky, Netstal PET line, PET Master, General PET injection molding machine https://www.pet-mould.com/produ , ct/preform-mould/96-cavity-preform-hot- runner- , mould-6.html

Minimum Order: 5 dozens

PET Preform Mould Specification Mould name96 cavity preform mould for PCO 1810 Neck 12.6g Preform Mould cavity96 cavity Neck finishPCO 1810 Neck finish Preform weight12.6g Insert materialsASSAB FS136/Purpose made 632 Mould plate4Cr13/P20(Preharden) Hot plateH13(Preharden) Heating coilRotfil from Italy/Hotset from Germany Copper nozzleBeryllium bronze From Italy InsulatorFrom USA DU PONT Suitable injection molding machinesHusky, Netstal PET line, PET Master, General PET injection molding machine Location:China Business Type:Manufacturer, Exporter Brands:BAINA Certificate:IS , O9001;CE;WRAS;GSG;National Torch Program Certificate Terms of payment and delivery:30% down payment;70% before shipment/FOB CIF Minimum order quantity:1 set Price:Consultation Packing details:Wooden pallet Delivery time:1-4 months Payment method:T/T L/C https://www.pet-mould.com/product/preform-m , ould/96-cavity-preform-hot- runner-mould.html

Minimum Order: 5 dozens

Shijiazhuang Suking biotechnology Co., Ltd. Was founded in 2012, located in shijiazhuang, capital city of hebei province. It is a chemical enterprise engaged in pharmaceutical intermediates, veterinary intermediates and chemical raw materials. Since the establishment of the company has established a good relationship with more than 20 countries.

Minimum Order: 1 bags

Design pressure: 1.0Mpa/3.0Mpa Test pressure: 1.5Mpa/4.5Mpa Design temperature: -196~200 °C Maximum flow: 4.3m3/h Quantity of max plates:60 Pipe Size:3/4" Channel: H

FEATURES ●End stackable for standard 0. 1" integrated circuit pitch. ●Molded 0.3" integrated circuit packing outine allowing automatic insertion. ●Smaller size makes better heat convection during PC board reflow wave soldering. ●Top tape sealed to withstand wave soldering, board washing. ●AlI plastics are UL 94V-0 grade fire retardant. ●Twin contacts designed to ensure stable contact. ●Gold plated contact to ensure low contact resistance and Tin plated terminal to prevent contamination during soldering. ●RoHS Compliant APPLICATIONS ●Numerical setting for computer terminal equipment ●Price setting for vending machines ●Programming for game machines ●Programming for industrial equipment and measuring instruments