Chemicals & Plastics

This product is used for organic synthesis. Brand: Soarwin CAS No.:879-18-5 EC number: 212-903-9 Molecular Formula: C10H7COCl Density: 1.265g/mLat 25°C(lit.) Melting point: 16-19°C(lit.) Boiling point: 190°C35mm Hg(lit.) Flash point: >230°F

Minimum Order: 1 bags

This product is hazardous, but it is relatively stable and can be stored and used under normal ambient temperature conditions. Brand: Soarwin CAS No.: 74-88-4 EC number: 200-819-5 Molecular Formula: CH3I Density: 2.279 Melting point: -64°C Boiling point: 41-43°C Flash point: -28 °C

Minimum Order: 1 bags

This product is used for organic synthesis. Brand: Soarwin CAS No.:879-18-5 EC number: 212-903-9 Molecular Formula: C10H7COCl Density: 1.265g/mLat 25°C(lit.) Melting point: 16-19°C(lit.) Boiling point: 190°C35mm Hg(lit.) Flash point: >230°F

Minimum Order: 1 bags

CJC-1295 is an incredibly effective growth hormone and works by causing another substance to be secreted. It stimulates the release of your own body’s growth hormone which. CJC-1295 is able to increase growth hormone naturally by binding to receptors for growth hormone releasing hormone on your brain and more specifically the pituitary gland. CJC-1295 allows the anterior pituitary to follow the natural, pulsatile release of growth hormone without an increase in appetite stimulation, cortisol, acetylcholine, prolactin, and aldosterone. Typically, you will see CJC compounded with Ipamorelin due to its ability to stimulate GHRH for enhanced results.Increased GH secretion and IFG-1 levels;Increased muscle growth;Increased bone density;Improved cognitive function and memory;Increased cellular repair and regeneratio CAS No.: 863288-34-0 EC Number: 206-141-6 Storage temp.: -20°C Freezer, Under inert atmosphere Solubility: Ethanol (Slightly, Heated, Sonicated), Methanol (Slightly), Water (Slightly)

Minimum Order: 1 bags

HGH Fragment 176-191 is a synthetic part sequences of human pituitary growth hormone. HGH Fragment 176-191 had anti-insulin activity in rats in vivo and in vitro. It is widely applied in the fields of medicine and health. It can also increase the body's metabolic rate and energy consumption. It is often used as a sports enhancer or as part of a weight loss therapy. CAS No.: 66004-57-7 EC Number: 200-001-8 Solubility: DMSO (Slightly), Methanol (Slightly)

Minimum Order: 1 bags

It is mainly used for organic intermediates and rust inhibitors. Brand: Soarwin CAS No.: 102-97-6 EC number: 203-067-6 Molecular Formula: C10H15N Density: 0.892 g/mL at 25 °C(lit.) Melting point: 143°C (estimate) Boiling point: 200 °C(lit.) Flash point: 190 °F

Minimum Order: 1 bags

This product is a kind of intermediate material of synthetic materials and needs to be stored in a sealed manner under dry room temperature conditions. Brand: Soarwin CAS No.: 407-97-6 EC number: 255-647-3 Molecular Formula: C5H10BrF Density: 1.360 Boiling point:162℃

Minimum Order: 1 bags

It is an important intermediate. There are up to 300 important products produced from aniline. Standard samples used for determining refractive index. They are used for detecting halogens, chromates, vanadates, nitrites and carboxylic acids.It can be used in the pharmaceutical industry. It is used in organic synthesis, resin, fake paint, and the synthesis of flavors and fragrances, etc. Brand: Soarwin CAS No.: 62-53-3 EC number: 200-539-3 Molecular Formula: C67N Density: 1.022g/mLat 25°C(lit.) Melting point: -6.2 °C Boiling point: 184°C(lit.) Flash point: 76 °C

The application of micronized waxes in can coatings is mainly used as an additive to improve the surface properties, processability and durability of the coating. The following are its specific roles: 1. Main functions Lubrication and abrasion resistance: micronized wax added to the coating can reduce the coefficient of friction, enhance the abrasion resistance of the can body in the process of high-speed stamping and molding, and prevent the coating from breaking. Anti-adhesion: prevent the coating surface from sticking when the tanks are stacked or transported, especially under high temperature and high humidity environment. Surface smoothness: Improve coating leveling, reduce surface defects (e.g. orange peel, pinholes), enhance printing or appearance quality. Chemical resistance: Some waxes (e.g. PTFE wax) enhance the coating's resistance to contents (acidic beverages, alcohol, etc.). 2. Advantages and challenges Advantages: low cost, low dosage but significant effect. Enhance production efficiency (reduce equipment wear and tear, lower scrap rate). Challenges: Particle size and dispersion need to be strictly controlled to avoid affecting coating adhesion or appearance. Food safety approvals (e.g. migration tests) are required. 3. Common Wax Types Polyethylene wax: cost-effective and versatile. PTFE waxes: temperature resistant, chemically inert, suitable for high performance requirements. Amide waxes: enhanced slip, but compatibility with resins is important.

liquid crystal for PDLC Switchable film QYPDLC-036 Established in 2007, Qingdao QY Liquid Crystal Co., Ltd is a leading manufacturer specializing in high-quality nematic liquid crystals, primarily used in PDLC smart film and high grade of LC display. With over 18 years of nematic liquid crystals production expertise. Our LCs are widely exported to Europe, the United States, South Korea, and other global markets. The capable of our producing approximately 5000 kilograms per month. We signed the Exclusive Agency Agreement with our South Korean customer from 2011

Minimum Order: 20 square metres

I. Main components of micronized wax The raw materials of micronized wax are varied, and the common ones include: Natural wax Brazilian carnauba wax: high hardness, good gloss, commonly used in food, cosmetics. Beeswax: with moisturising properties, used in skin care products and ointments. Synthetic waxes. Polyethylene wax: high temperature resistant, used in coatings, plastic processing. PTFE wax: excellent lubrication, used in engineering materials. Fischer-Tropsch Wax: high melting point, used for inks, hot melt adhesives. Modified waxes Oxidised polyethylene wax: improved polarity, used for pigment dispersion. II. Main applications of micronized wax Coatings and inks Improve surface abrasion resistance and scratch resistance. Improve levelling and prevent pigment settling. Plastics and Rubber As lubricant or mould releasing agent, improve processing efficiency. Enhance surface gloss of products. Cosmetics and skin care products Used in foundations, lipsticks, etc. to improve spreading and setting effects. Provides a matte or silky feel.

Methyl 3-methoxyacrylate is a transparent and colorless liquid, a very important C-3 block in the field of organic synthesis, with good reactivity, often used in pesticides, pharmaceuticals, polymer materials and other fields, such as the synthesis of fungicide 3-methoxycarbonyl-4,5-dimethylthiophene. Br , and: Soarwin CAS No.: 34846-90-7 EC Number: 672-629-4 Molecular Formula: C5H8O3 Density: 1.08 g/mL at 25 °C(lit.) Melting point: 3-4°C Boiling point: 56 °C18 mm Hg(lit.) Flash point: 145 °F

Minimum Order: 1 bags

1,3-Dichloro-2-fluorobenzene is a white to light yellow to light orange powder crystal, used as an intermediate of antimicrobial agents such as fluazinic acid, lomefloxacin, terfluoperazine. Intermediate for pharmaceuticals, pesticides, liquid crystal materials. Brand: Soarwin CAS No.: 2268-05-5 EC Number: 607-128-1 Molecular Formula: C6H3Cl2F Density: 1.3967 (estimate) Melting point: 37-40 °C(lit.) Boiling point: 168-169 °C(lit.) Flash point: 140 °F

Minimum Order: 1 bags

Ethyl 3-(N,N-dimethylamino)acrylate is a light yellow liquid, an ester organic substance, which is an important intermediate in the new route of synthesis of oxfloxacin drugs, and an important intermediate in the new process of synthesizing levofloxacin. Brand: Soarwin CAS No.: 1117-37-9 EC Number: 402-650-4 Molecular Formula: C7H13NO2 Density: 1.1095 (rough estimate) Boiling point: 261.28°C (rough estimate) Flash point: >110℃

Minimum Order: 1 bags