Chemicals & Plastics

Methanol has a wide range of uses and is a basic organic chemical raw material and high-quality fuel. It is mainly used in the fields of fine chemicals and plastics to produce a variety of organic products such as formaldehyde, acetic acid, methyl chloride, methylamine, dimethyl sulfate, etc. It is also one of the important raw materials for pesticides and medicines. Methanol can be used as a new type of clean fuel after deep processing and can also be added to gasoline for combustion. Brand: Soarwin CAS No.: 67-56-1 EC Number: 200-659-6 Molecular Formula: CH4O Density: 0.791 g/mL at 25 °C Melting point: -98 °C(lit.) Boiling point: 65.4 °C(lit.) Flash point: 52 °F

Minimum Order: 1 bags

Ethyl acetate is a widely used fine chemical product with excellent solubility and quick drying. It is widely used and is a very important organic chemical raw material and excellent industrial solvent. It is widely used in the production of acetate fiber, ethyl fiber, chlorinated rubber, vinyl resin, acetate fiber resin, synthetic rubber, coatings and paints. Its main uses are: as a chemicalbook industrial solvent, it is used in coatings, adhesives, ethyl cellulose, artificial leather, linoleum colorants, artificial fibers and other products; as an adhesive, it is used in the production of printing inks and artificial pearls; as an extractant, it is used in the production of medicines, organic acids and other products; as a spice raw material, it is used as the main raw material for fruit flavors such as pineapple, banana, strawberry and spices such as whiskey and cream. Brand: Soarwin CAS No.: 110-54-3 EC Number: 203-777-6 Molecular Formula: C6H14 Density: 0.659 g/mL at 25 °C(lit.) Melting point: -95 °C Boiling point: 68.95 °C(lit.) Flash point: 30 °F

Minimum Order: 1 bags

Vinyl acetate acid produced by acetic acid and acetylene is an important raw material for the synthesis of drugs, dyes and fragrances, and is also an important solvent for processing rubber. Acetic acid plays an important role in industrial production and organic synthesis. Brand: Soarwin CAS No.: 64-19-7 EC Number: 200-580-7 Molecular Formula: C2H4O2 Density: 1.049 g/mL at 25 °C(lit.) Melting point: 16.2 °C(lit.) Boiling point: 117-118 °C(lit.) Flash point: 104 °F

Minimum Order: 1 bags

PDLC liquid crystals high Birefringence refractive index liquid crystal Mixture QYPDLC-036 QYPDLC-421 QYPDLC-901 QYPDLC- HD010 QYPD-470-N01 QYPD-470-N02 QYPD-470-N03 QYPDLC-HD002-6 Lower Operating Temperature Tkn(C) <-10 <-20 <-30 -30 -15 -15 -15 -10 Upper Operating Temperature Tni(C) 95 105 106 150 100 102 90 127 Birefringence(589nm,20C) 0.2501 0.251 0.264 0.28 0.275 0.28 0.275 0.315 Ordinary Refractive Index (No)(589nm,20C) 1.521 1.5235 1.528 1.517 1.524 1.523 1.523 1.529 Electrical properties V10(VAC),0,20(V) 1.524 1.887 1.97 2.37 1.55 1.57 1.53 2.562 Electrical properties V90(VAC),0,20(V) 2.247 2.642 2.78 2.93 2.33 2.38 2.21 3.49 Established in 2007, Qingdao QY Liquid Crystal Co., Ltd is a leading manufacturer specializing in high-quality nematic liquid crystals, primarily used in PDLC smart film and high grade of LC display. With over 18 years of nematic liquid crystals production expertise. Our LCs are widely exported to Europe, the United States, South Korea, and other global markets.

Minimum Order: 20 square metres

The application of micronized waxes in wood coatings is mainly used to enhance the smoothness, scratch resistance and feel of the coatings, as well as to provide a matting effect. The following are specific application scenarios: Application Scenarios Enhancement of smoothness and scratch resistance: Micronized wax can improve the leveling of wood coatings, reduce surface imperfections, and enhance abrasion resistance and scratch resistance. Optimization of feel: Some micronized waxes (e.g. polypropylene waxes) provide a soft touch and, in combination with silica matting powders, a matte effect can be achieved. Matting effect: The particle size and distribution of the micronized waxes influence the matting effect of the coating film and are suitable for wood finishes that require a matt appearance.

Washing machines face a combination of water, detergent and high temperatures, which is different from most ordinary mechanical systems. Washing machine oil seals are designed to withstand constant exposure to water and cleaning agents, while ordinary oil seals can quickly fail due to corrosion from detergents and water. Brand Name: 37*66*9.5/12 Material: NBR nitrile rubber Dimensions: inner diameter * outer diameter * thickness Scope of application: washing machine Type: Oil Seal OEM: Accpetable Place of Origin: Hebei, China Features: wear resistance, waterproof Uses: water seals, dust seals，oil seal Packing: 1 pc per bag Certificate: ISO9001/TS16949 Packaging & delivery Selling Units: Single item Single package size: 25X25X3 cm Single gross weight: 0.350 kg Package Type: cartons packing Delivery Detail Within 15 days

Strong anti-pollution ability, can be used for large pollution occasions, such as heavy vehicle axle, concrete machinery, agricultural machinery and so on. Size: 142*170*15/16 Brand: HTOB Type: Cassette Oil Seal Material: NBR, customized Origin: Hebei China Color: Black, customized Transport Package: Paper roll/carton Cassette NBR wheel oil seals advantage: Semi-metal/semi-rubber outer diameter – improved static sealing, heat dissipation and grease retention within the housing Complete set of multi-lip seal design Axial lip seals and secondary lip seals to prevent contaminant ingress Built-in wear-resistant bushing Curle offers reliable turnkey solutions that are easy to install and prevent lip damage during transportation, handling, and installation High-performance elastomeric material Maintain the market leader in lubricant performance Reliably prevents the ingress of solid and liquid contaminants while reducing friction and extending seal life

The structure of shock absorber oil seal consists of three parts: shock absorber oil seal body, reinforced skeleton and self-tightening coil spring. The sealing body is divided into the bottom, waist, cutting edge and sealing lip according to different parts. Motorcycle Oil Seals Product advantages: Superior sealing performance Self-lubricating compound Reduces friction by 20% over standard seals Increased seal life Compatible with a wide range of (OEM) oils Improved performance Withstands extreme conditions Maintain low and consistent friction Reduced wear and air suction

Name: Rubber O-ring Size: wire diameter * inner diameter Material: NBR, FKM, HNBR, Silicone, custom material Color: Black, brown, green, yellow, red, white, custom color Brand: HTOB Country of origin: Hebei, China Fluorocarbon (FKM) has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics and many organic solvents and chemicals. Low temperature resistance is normally not favorable and for static applications is limited to approximately -26°C (-15°F) although certain compounds are suitable down to -46°C (-50°F). Under dynamic conditions, the lowest service temperature is between -15°C and -18°C (5°F and 0°F). Gas permeability is very low and similar to that of butyl rubber. Special FKM compounds exhibit an improved resistance to acids and fuels.  O-ring applications can be very demanding.  GFS Engineers are available to consult on any O-ring application.  Click here to contact a GFS Engineer. MATERIALS: 75A FKM BLACK 75A Durometer Black FKM O-rings offered in a variety of import and domestic compounds.  Materials in this category available for purchase include GFS FKM75A Black, and Parco 9500-75. https://www.htoboilseal.com/

Automotive seals play critical roles in diferent types of four wheeler vehicles. They are primarily used with bearings, hubs, anddiferent types of mechanical systems. The seals are designed to prevent leakage of oil, lubricant, and component damage dueto heat. HTOB OlL SEAL provides a wide range of sealing solutions to meet the various needs of automotive manufacturing. ain Application to: Mitsubishi Motors/ ISUZU/ HINOTOYOTA/ NISSAN / HONDA/ Peugeot Mercedes-Benz IVEVO /VOLVO / SCANIA Renault/BPW CHINESE CARS: JAC Please refer to attached Toyota OE Number for more sizes. Customer philosophy: User reputation is the golden cup of the enterprise.

End caps are designed for applications where the shaft does not pass through the housing wall of the bore. The end cover provides protection for the bearings. The covers are designed to fit into housing bores for rotary shaft seals. They have the same tolerances as those for the O.D. of a seal. The inner housing is carbon steel and the outer seal is nitrile rubber. It is mainly used for the orifice, the core opening and the bearing of an oil seal, which is particularly used as a substitute for an end flange or an end cover in a gear box, and the rubber layer at the outer diameter ensures the oil leakage in the oil seal seat.  At the same time,it also strengthens the neatness and beauty of the cabinet. FKM EC CUP END VK OIL SEAL Advantages: 1. good static sealing 2. compensation for different thermal expansion 3. there is no risk of exposure to corrosion 4. effective protection against air side pollution 5. allows higher surface roughness of steel holes 6. installed in the split groove https://www.htoboilseal.com/products/fkm , -ec-cup-end-vk-oil-seal.html

Size: 320*360*20 Brand: HTOB Type: TC Oil Seal lip: Double lips and single lip are available Seal。 Origin: Hebei China Color: Black,brown Transport Package: Paper roll/carton Product Type: The rotary oil seal belongs to the rotary shaft seal It is one of the common framework oil seal standard models, also known as lip seal, standard part oil seal, TC type oil seal. It is a rotary oil seal, used for the sealing of oil and dust occasions, the pressure is 0.03MPa(0.3kgf/m2), and it is widely used. Common materials include: rubber TC skeleton oil seal, fluorine rubber TC skeleton oil seal, silicone rubber TC skeleton oil seal and so on.

PDLC Mixture for Smart window QYPDLC-182 Established in 2007, Qingdao QY Liquid Crystal Co., Ltd is a leading manufacturer specializing in high-quality nematic liquid crystals, primarily used in PDLC smart film and high grade of LC display. With over 18 years of nematic liquid crystals production expertise. Our LCs are widely exported to Europe, the United States, South Korea, and other global markets. The capable of our producing approximately 5000 kilograms per month. We signed the Exclusive Agency Agreement with our South Korean customer from 2011

Minimum Order: 20 square metres

The application of wax micronized powder in road marking is mainly used as a functional additive to improve the performance of marking coatings. The following are its specific uses and advantages: 1. Anti-fouling and anti-adhesion Anti-adhesion: wax micropowder (such as polyethylene wax, Fischer-Tropsch wax, etc.) added to hot melt road marking coatings can form a fine wax layer on the surface of the coatings, reduce the adhesion of dust and oil, and reduce the wear and tear of vehicle tires on the markings. Anti-pollution: especially in rainy and snowy weather, the hydrophobicity of wax can delay the penetration of pollutants and keep the reflectivity of the marking line. 2. Abrasion resistance and durability Wax micropowder can enhance the hardness and abrasion resistance of the paint, reduce the wear and tear caused by long-term vehicle crushing, and extend the life of the marking line. Synergize with resin, glass beads and other ingredients to enhance mechanical strength. 3. Optimization of construction performance Fluidity and dispersion: Wax micropowder can improve the fluidity of the paint in the high temperature molten state, making the construction smoother and the marking line more level. Anti-settling: Prevent fillers (such as titanium dioxide, glass beads) in the paint from settling when stored, and maintain uniformity. 4. Reflective performance aid The wax layer on the surface can protect the reflective glass beads from falling off easily and maintain the reflective effect at night. 5. Environmental protection and cost Part of the wax micropowder (such as vegetable-based wax) can replace petroleum-derived components, reducing the burden on the environment. Reduce the cost of frequent maintenance of marking.