Chemicals & Plastics

Calcium L-aspartate is a white powder, odorless, hygroscopic, readily soluble in water, slightly soluble in organic solvents, and its aqueous solution is neutral. Calcium L-aspartate is stable in high-temperature or neutral/alkaline environments and is suitable for various processing conditions. Advantages: High absorption rate:  Calcium L-aspartate chelating structure promotes the efficient absorption of calcium ions in the small intestine (superior to calcium carbonate, calcium phosphate, etc.). Mild and non-irritating: Calcium L-aspartate has little irritation to the gastrointestinal tract and is suitable for people with insufficient gastric acid secretion (such as the elderly). Synergistic nutrition: Calcium L-aspartate provides calcium while supplementing aspartic acid (participating in energy metabolism and immune regulation).

Sodium diacetate (SDA) is one of the most excellent new varieties for mold prevention and preservation in grain, food, and feed additives. It has high efficiency in mold prevention, preservation, and increasing nutritional value. It is suitable for safe storage of grain seeds, as well as for mold prevention and preservation of feed, increasing nutritional value, and improving palatability. It is especially suitable for the preservation of corn and grains, and its effect is better than that of calcium propionate. The addition amount is only half of calcium propionate, but the price is lower than that of calcium propionate. Advantage Security Food Grade Sodium Diacetate has low toxicity, with an allowable daily intake (ADI) of 0-15mg/kg per person. Sodium diacetate's final metabolites in the body are carbon dioxide and water, with no residue and no toxic side effects Nutritional value Sodium diacetate is used for the preservation of forage silage, which can improve the utilization rate of protein in forage.

Pectin is white or yellow or light gray, light brown coarse powder to fine powder, almost odorless, sticky taste. Dissolved in 20 times water, forming a milky viscous colloidal solution, is weakly acidic. Strong heat resistance, almost insoluble in ethanol and other organic solvents. Low ester pectin is mainly used in general or low acid jam, jelly, jelly and frozen desserts, salad dressing, ice cream, yogurt and so on. Specification ITEM STANDARD  RESULT Appearance White, pale yellow, light grey or light brown White, pale yellow, light grey or light brown State Powder Powder Esterification degree (DE) % 58-62 60.9 Drying reduction /% ≤12 6.8 Acid insoluble ash /% ≤1 0.8 Sulfur dioxide /% ≤50 35.7 Total galacturonic acid /% ≥65 75.3 Pb/(mg/kg) ≤5 2.2 (Methanol + ethanol + isopropyl alcohol) /% ≤1 0.54

Food Additive Lactitol is a white crystal or crystalline powder, odorless, slightly sweet, its sweetness is 0.3-0.39 times that of sucrose, low hygroscopicity, suitable for adding to low-sweetness foods. Advantages: Lactitol has a lower calorie content Lactitol is noncaries when added to food Lactitol has the function of regulating the intestine Lactitol has the function of protecting liver Specification ITEM STANDARD (GB1886.98-2024) RESULT Appearance White crystals powder White crystals powder Lactitol content(dry substance）w/% 95.0 ~102.0 99.14 Other polyols(dry substance）w/% ≤2.5 0.15 Hydration      w/% ≤1.5 0.7 Reducing sugar   w/% ≤0.1 < 0.1 chloride  (dry substance）mg/kg ≤100.0 < 100 sulfate   (dry substance）mg/kg ≤200.0 < 200 Burning residue (dry substance）w/% ≤0.1 0.04 Nickel (Ni)/ mg/kg  ≤2.0 < 2.0

nematic liquid crystals PDLC E7 54211-46-0 CE5 4-((2s)-2methylbutyl)phenyl 4-(octyloxy)benzoate 69777-61-3 Established in 2007, Qingdao QY Liquid Crystal Co., Ltd is a leading manufacturer specializing in high-quality nematic liquid crystals, primarily used in PDLC smart film and high grade of LC display. With over 18 years of nematic liquid crystals production expertise. Our LCs are widely exported to Europe, the United States, South Korea, and other global markets. The capable of our producing approximately 5000 kilograms per month. We signed the Exclusive Agency Agreement with our South Korean customer from 2011

Minimum Order: 20 square metres

We produce a range of chemicals, and powders for use in cleaning all types of banknotes and also have the CLS laser cleaning machine to deal with the worst cases of banknotes. Our products range from: Vectrol Paste TTZ Universal Solution Zuta S4 Castrox Oxide HQ45 SSD Solution SSD super Solution SSD Super Automatic Solution SSD PK58 Solution SSD Universal Solution SSD Master Solution SSD D2 Fuse Solution SSD Virus Termi Solution

Minimum Order: 5 dozens

Unlock unmatched efficiency in your industrial operations with Caluanie Muelear Oxidize,https://wa.link/Aprilinternational, a high-performance chemical agent trusted by professionals worldwide. Engineered for demanding applications, Caluanie is widely used in the metal refining, chemical processing, and solvent manufacturing industries

Minimum Order: 2 barrels

Water-soluble micronized waxes are mainly used to enhance the scratch resistance, abrasion resistance and surface smoothness of paints, printing inks and other materials, and at the same time have the characteristics of uniform dispersion, non-toxicity and environmental protection. Specific function Enhance scratch resistance and abrasion resistance Water-soluble micronized wax can significantly enhance the hardness and abrasion resistance of the surface of the paint film or ink, reduce the coefficient of friction, and avoid scratches and sticking. For example, it can be added to automobile paint and furniture paint to enhance the durability of the coating. Improve surface smoothness Its regular particle form can reduce friction resistance and give a smoother surface effect to the touch, suitable for surface treatment of plastic, metal and other materials. Enhance dispersion and stability Micronized wax is easy to disperse in water-based system, which can evenly mix pigments and fillers, prevent settling, and enhance the fluidity and stability of coatings or inks. Environmental friendliness and applicability Non-toxic, odourless and solvent-resistant, it is suitable for water-based coatings, inks and adhesives, especially for industrial scenarios with high environmental requirements.

Liquid Crystal for PDLC applications RM82 Nematic liquid crystal RM82 125248-71-7 1,4-BIS-[4-(6-ACRYLOYLOXYHEXYLOXY)BENZOYLOXY]- , 2-METHYLBENZENE C39H44O10 HPLC: 95% MIN. Established in 2007, Qingdao QY Liquid Crystal Co., Ltd is a leading manufacturer specializing in high-quality nematic liquid crystals, primarily used in PDLC smart film and high grade of LC display. With over 18 years of nematic liquid crystals production expertise. Our LCs are widely exported to Europe, the United States, South Korea, and other global markets. The capable of our producing approximately 5000 kilograms per month. We signed the Exclusive Agency Agreement with our South Korean customer from 2011

Minimum Order: 20 square metres

USP - appointment to visit the facilities tank farm/ FOB tank to tank Dear ladies, dear gentlemen, We continue to add new facilities to our offering list. Please see below the latest one, a face to face table top meeting between the facility and the buyer's reps. Any serious buyer can schedule an appointment to visit the facilities tank farm to see and test the product for themselves. The facility will give physical Proof of Product on the ground. FOB TTT: 1. The buyer provides an ICPO along with their Company Registration Certificate or any valid ID and the TSA or CPA for verification and registration by the seller. 2. The seller issues a draft Commercial Invoice (CI), which the buyer signs and returns. Following this, the seller will issue an appointment letter for the TTM, to be signed by both the buyer and their logistics company, confirming their readiness to facilitate the TTM at the buyer's logistics terminal. 3. Upon confirmation of the TTM by the buyer's logistics company, the meeting takes place at the scheduled time and date, with the agenda including: a. Verification of identification proofs for all attendees. b. Buyer presenting Proof of Funds (POF). c. Seller presenting hard copies of POP and SGS documents for review, no later than 48 hours before inspection. d. Seller inspecting the buyer's designated tank/vessel to ensure readiness for seamless injection operations. 4. After the successful meeting and initial inspection, the buyer may conduct a dip test in the seller's tank at the buyer's expense. 5. The buyer completes the payment for the confirmed products as outlined in the CI. 6. The seller proceeds to inject the product into the buyer's tank and transfers ownership of the product as instructed by the buyer. The buyer then lifts the product. 7. The seller disburses payments to all intermediaries involved in the transaction. Monthly contract shipments continue as per the terms and conditions of the sales and purchase agreement between the buyer and the seller. We would like to reiterate that we will not be assigning any additional human resources to answer questions to the board in advance. Each applicant must first qualify by submitting their current application documents. Once these have been submitted, each applicant will be contacted directly by the facility within a maximum of 48 hours. It is not possible to optimize the application documents at a later date. Each applicant will only be given one chance, as we are inundated with qualified application documents almost every week.  The applicant must include the relevant text elements of this facility in their application documents so that the facility can see that the applicant has accepted the structure. We look forward to meeting your requirements and remain

chiral nematic liquid crystals ce5 69777-61-3 CE5 4-((2s)-2methylbutyl)phenyl 4-(octyloxy)benzoate 69777-61-3 Established in 2007, Qingdao QY Liquid Crystal Co., Ltd is a leading manufacturer specializing in high-quality nematic liquid crystals, primarily used in PDLC smart film and high grade of LC display. With over 18 years of nematic liquid crystals production expertise. Our LCs are widely exported to Europe, the United States, South Korea, and other global markets. The capable of our producing approximately 5000 kilograms per month. We signed the Exclusive Agency Agreement with our South Korean customer from 2011

Minimum Order: 20 square metres

Chrial Dopant R-1011 Liquid Crystal 154102-21-3 Established in 2007, Qingdao QY Liquid Crystal Co., Ltd is a leading manufacturer specializing in high-quality nematic liquid crystals, primarily used in PDLC smart film and high grade of LC display. With over 18 years of nematic liquid crystals production expertise. Our LCs are widely exported to Europe, the United States, South Korea, and other global markets. The capable of our producing approximately 5000 kilograms per month. We signed the Exclusive Agency Agreement with our South Korean customer from 2011

Minimum Order: 20 square metres

Amorphous Hydrophilic Nano Sio2 Powder 112945 52 5 Silicon Dioxide HL-200 for Adhesive Coatings UPR Fumed Silica Classification:Silicon Dioxide Place of Origin:Hubei, China Other Names:Pyrogenic silica MF:O2Si EINECS No.:231-545-4 Grade Standard:Food Grade, Industrial Grade, Medicine Grade Appearance:White Nano-Scaled Powder Application:Food, Coating, Silicone rubber, cosmetic, UPR Brand Name:HIFULL Model Number:HL-200 Product name:Hydrophilic fumed silica HL-200 nano particle silicon dioxide Primary particle size:7-40 nm Country of Origin:China HS code:28112200 Purity:≥99.8% Advantage :ISO 9001, REACH certificates Type:nano materials One bag dimension:110cm*55cm*25cm Packaging Detail:multi-layered kraft paper bags of 10 kg/bag CAS NO: 112945-52-5

Minimum Order: 1 bags

HIFULL Factory Price HL-380 Pharmaceutical Grade Anti-Caking Agent Colloidal Anhydrous Silicon Dioxide (SiO2) Rubber Powder Classification:Chemical Auxiliary Agent Place of Origin:Hubei, China Other Names:Silicon Dioxide MF:O2Si EINECS No.:215-684-8 Grade Standard:Food Grade, Industrial Grade, Medicine Grade Appearance:White Nano-Scaled Powder Application:Printing & Ink; Coating; Sealants; Rubber Brand Name:HIFULL Model Number:HL-380 Specific surface area(BET):380±30m2/g pH in 4% dispersion:3.9~4.5 Loss on drying(2 hour at 105℃):≤2.5% Loss on ignition(2 hour at 1000°):≤2.5% Sieve residue(45μm):<250mg/kg Silica content(ignited material):≥99.8% Tamped density(2 hours at 105℃):40~60g/dm2 Type:nano materials One bag dimension:110cm*55cm*25cm Application:Printing& , Ink; Coating; Sealants; Rubber Packaging Detail:multi-layered kraft paper bags of 10 kg/bag Advantage : ISO 9001 CAS NO 112945-52-5

Minimum Order: 1 bags