Offers to Sell

In recent years, due to the continuous improvement of China's industrialization, China has become a major mold manufacturing country and a major mold trading country in the world. The mold industry is highly related to many industries and involves a wide range of areas. The continuous development of the downstream market also drives the rapid development of my country's mold industry. Especially as the global manufacturing industry shifts to China, driving the upgrading of my country's manufacturing industry, it will also bring new growth opportunities to the mold industry. In 2016, the industrial mold market size of China's mold industry reached 416.96 billion dollar. Due to the impact of the epidemic, the market size of China's mold industry will decline in 2020, and its market size will be 395.16 billion dollar. It is expected that the market scale of china plastic mould factory will rebound in 2021, reaching 465.9 billion dollars. As a china plastic injection mold manufacturer, we will do our best to meet all the needs of customers.

Ⅰ. ABS Injection Molding Processing Performance (1) Because of the strong moisture absorption as well as high water content of ABS, the plastic parts that are made of ABS have low gloss and poor internal quality. As a result, ABS injection molding should be dried so that the water content is not more than 0.3%. (2) ABS melt has obvious non-Newtonian properties. Increasing the molding pressure can significantly reduce the melt viscosity, and its viscosity will also decrease with the increase of temperature. (3) ABS has a small molding shrinkage rate, and the shrinkage rate changes in the range of 0.3% to 0.8%, so the precision of plastic parts is high. (4) ABS injection molding has good processing performance, and there are no special requirements for injection molding machines. Both general screw and plunger injection molding machines can be used, but multi-purpose screw injection molding machines have better product quality. (5) In order to improve the quality, dimensional stability, surface gloss of plastic parts and eliminate residual internal stress when using screw injection mold tooling machine, it is more appropriate to control the injection volume at about 50% of the maximum injection volume. (6) The viscosity of ABS melt is medium, better than PC and PVC, but worse than PS, so it is better to use straight-through nozzle. (7) The main channel of the ABS mold is preferably conical, and the main channel should be short, generally about 50mm, and the longest should not exceed 100mm. (8) The cross-sectional area of the runner must be large enough so that the molten material can fill the cavity before the runner solidifies and compact in the mold. The diameter of the section should generally be greater than 5mm, but not more than 10mm. (9) The ejection force of the ejection mechanism of ABS should not be too large, otherwise the surface of the plastic part is prone to whitening. (10) Although the shrinkage rate of ABS injection china plastic moulding is small, it is easy to generate internal stress, so the plastic parts generally need to be heat treated, and the plastic parts can be treated in hot air at 70 ° C for 2 to 4 hours. Ⅱ. Conditions for ABS injection molding temperature (1) Barrel temperature ABS is an amorphous plastic with no obvious melting point, and the melt flow temperature is not too high. It has sufficient fluidity above 160 °C, but if the temperature is too high, it will not increase the fluidity. There are many varieties of ABS, and the barrel temperature of different varieties is different. The barrel temperature of general ABS is 180~230℃, the temperature of heat-resistant ABS is 190~240℃, and the temperature of flame retardant ABS is 170~220℃. The nozzle temperature is 20~30℃ lower than the barrel temperature. (2) Mold temperature The level of mold temperature has a great influence on the quality of plastic parts. During ABS injection molding, the mold temperature should be controlled within the allowable range. Generally, the mold temperature should be controlled at 50-70 °C. (3) Injection pressure The size of the injection pressure mainly depends on the structure and wall thickness of the plastic part. Usually, the injection pressure of general ABS is 50-70MPa, the injection pressure of heat-resistant ABS is 60-85MPa, and the injection pressure of flame-retardant ABS is 60-100MPa. If the flow resistance during filling is large, use a higher injection pressure. Conversely, use a lower injection pressure.

When you visit China for holidays or business trip (trade fair,trade show, exhibition,supplier visit,product sourcing,customer visiting etc ), when you need assistance for your China trip, Pls feel free to contact us via below: EMAIL:Susan205060@hotmail.com Sky , pe: Susan205060 Cell Phone: 0086-136 7195 5713 Whatsapp: +86 13671955713 Wechat:+86 13671955713 http://www.simultaneousinterpre , tation- translationequipment.com ***** Make your China trip easier & Successful!***** ***** Make your China trip easier & Successful!***** Business trip in China (Shanghai based, familiar with and available to travel to the cities include beijing, ji’nan, shijiazhuang,Ningbo, Yiwu, Wuxi, Shaoxing, Wenzhou, Nanjing, Hangzhou, Suzhou, Xiamen, Qingdao,Shenzhen,guangzhou,foshan etc) well-trained & experienced business translators ,interpreters ,business assistants What we can do for you if you choose our service: ***** As Business Interpreters / Translators, we provide below services: 1. Interpreter / Business Assistant for * Exhibition / Trade Fair / Trade show * Business Meeting * Business Negotiation * Factory / Supplier Visit 2. Organize the business plan per your request 3. Make appointment with factories & suppliers in advance 4. Make reservation for the tickets ( flight or train) or rent the van per your request 5. Travel area include the Great China &HK *****For Business Assistants,we provide your below services: Expo/Exhibition/Trade fair (booth,VIP Support) Support Clients to Set up Office Product Sourcing Make Contracts Market Research Secretary Service As Travel Guides, we provide below services: 1.On base your request, we tailor-made your tour plan and arrange the whole trip (include accommodation/hotel reservation/, car/van rental, train or bus or acrobat show tickets reservation etc) 2.Recommend traditional and must-see programs for the tour. 3. Airport pick-up & drop-off 4. Show you around Shanghai famous market for shopping if need. 5.Work as your interpreter to break down the language barrier and communicate with the local people 6.Arrange tour aroundShanghai or the other cities withinChina Shanghai interpreter, Shanghai translator, guide, China translator,China interpreter,tour guide, Ningbo translator, Ningbo interpreter,Hangzhou translator, Hangzhou interpreter,nanjing interpreter,wuxi interpreter,qingdao interpreter, yiwu translator, yiwu interpreter,yiwu guide,beijing interpreter,beijing translator,shenzhen translator,shenzhen guide,guangzhou translator,guangzhou interpreter,wenzhou translator,wenzhou interpreter,suzhou interpreter,suzhou translator,wuxi translator,wuxi interpreter,shaoxing interpreter,shaoxing translator,taizhou interpreter,taizhou translator,personal tour guide, private tour guide, English speaking guide

Inner Race Milling Machine QYXB125 Product Description Single station inner race milling machine with one-time clamping and processing of multiple BJ/UFJ/SX/DOJ grooves, 20-65 mm processing of groove diameter, which is suitable for the milling of inner race. High efficiency, hard milling instead of grinding，it can carry with truss or joint robot and automatic line. Technical Parameters ITEM QYXB125 Max Clamping Diameter, mm Ø35 Max Work piece Height, mm 60 Groove Diameter Scope, mm Ø20-Ø65 Diameter Of Steel Ball Scope, mm Ø12.7-Ø22 Quickly understand how to choose a rolling machine We have 30,000 square meters of standard workshops and modern parts processing, complete machine assembly, test and inspection, painting and other technological equipment. The sales and service network covers all major industrial towns and manufacturing areas in the country, and has agencies in the UK and Southeast Asia to ensure efficient and efficient services for customers.

Slanting Facing and Centering Machine SZ820530/SZ820550 Product Description Both ends of the one clamping are processed at the same time, the slanting facing and centering machine with 100-500 mm workpiece length is suitable for milling, chariot, drilling center hole, drilling, tapping, boring, reaming, grooving package of all kinds of slender, irregular and stepped parts. High coaxiality, high efficiency, chip easily, it can carry with truss or joint robot and automatical line.  Technical Parameters ITEM SZ820530 SZ820550 Clamping Diameter Scope, mm Ø15-Ø50 Ø15-Ø50 Workpiece Length Scope, mm 100-300 200-500 Max Center Drilling Clamping Diameter, mm Ø20 Ø20 Max Milling Amount(One Side), mm 4 4

Inner Race Groove Grinding Machine QMB125 product description Inner race grinding machine with one-time clamping and processing of multiple BJ groove, 20-65 mm processing of groove diameter, which is suitable for the precision grinding of inner race. High precision, high efficiency, it can carry with truss or joint robot and automatical line. Cnc machine Technical Parameters ITEM QMB125 Max Clamping Diameter, mm Ø75 Max Workpiece Height, mm 60 Groove Diameter Scope, mm Ø20-Ø65 DiameterOf Steel Ball Scope, mm Ø12.7-Ø22

CNC Lathe Truss Robot Truss robot is a kind of full-automatic industrial equipment based on right angle X, Y and Z coordinate system to adjust the working position of the workpiece or realize the trajectory movement of the workpiece. Its control core is realized by industrial controllers (such as PLC, motion control, single chip microcomputer, etc.). Through the analysis and processing of various input (various sensors, buttons, etc.) signals by the controller, after making certain logical judgment, the controller issues execution commands to each output element (relay, motor driver, indicator light, etc.) to complete the joint movement between the X, Y and Z axes, so as to realize a complete set of fully automatic operation process.

Outer Race Milling Machine QYXA125 Single station outer race milling machine with one-time clamping and processing of multiple BJ/UFJ/SX/DOJ grooves, 45-100 mm processing of groove diameter, which is suitable for the milling of outer race. High efficiency, hard milling instead of grinding，it can carry with truss or joint robot and automatical line. Outer Race Machining The production of outer races is demanding on both the machine and the machining technology. Excellent quality for the ball tracks, tight tolerances in turning operations, and high volumes are required. To meet these demands, EMAG offers optimized manufacturing systems for the production of CV joint workpieces such as outer races, inner races and cages. These manufacturing processes are customized to each individual customer’s workpieces, which guarantees high productivity and availability.

Dear sir/madam we offer you red palm oil as per all those terms and conditions indicated below: product: red palm oil origin: malaysia price: 400 euro MOQ: 25tons inspection: SGS payment: TT delivery time: 5-7 days after payment confirmation sample: available at buyer's cost( freight cost) in case of interest, pls send your fully requirement details to our e-mail: eximbroker@yandex.com regards/mr.nevzat topcu

Minimum Order: 25

Sal is from Italy. He has been buying hydraulic cartridge valves in China for quite a long time and is very knowledgeable. At the beginning of this year, they developed a new hydraulic press for sheet stretching, which uses hydraulic needle valves. Considering the exhibition time, Sal directly purchased 50 standard hydraulic needle valves of HydraForce, and the trial run was successful, and the reservation volume at the exhibition was also good. The boss asked Sal to try to purchase hydraulic needle valves in China instead of HydraForce. He contacted several hydraulic needle valve suppliers, but they were not 100% confident about the internal leakage of 0.3cc/min. Sal selected 2 hydraulic needle valve manufacturers with the most trust and quality. 4 weeks later, the hydraulic needle valves were installed with the equipment. After a period of operation, the working pressure of the hydraulic press could not be increased, resulting in the plate could not be stretched. The engineer found that the hydraulic needle valve was abnormal, and there were leakage traces at the fitting gap between the valve spool and the valve body. After testing the hydraulic needle valve separately, the internal leakage was 0.5cc/min, while the hydraulic needle valve at 0.3cc/min did not have any leakage traces, that is, the hydraulic needle valves from those 2 hydraulic valve manufacturers have unstable internal leakage accuracy. Sal suggested still purchasing HydraForce standard parts, but the boss was not satisfied and asked Sal to try again. At this time, Sal was a little worried. Sal saw on Google that the manufacturing quality of AAK Hydraulic Valves is comparable to that of HydraForce. He directly sent an email to ask if AAK has existing programming for HydraForce hydraulic needle valve. We learned that they were stuck in the internal leakage. I told him that we had existing samples of this hydraulic needle valve, and its internal leakage had exceeded HydraForce standard 0.3cc/min. Sal doesn't seem to believe it and asked us to send 5 samples. Last week, Sal sent the PO for the first batch of hydraulic needle valves and told that the internal leakage of AAK samples was at 0.2cc/min, the internal leakage accuracy was 20% higher than that of HydraForce, but the price of AAK was cheaper than that of HydraForce. The boss was surprised that he found such a strong manufacturer AAK Hydraulic Valve. AAK hydraulic needle valve's ultra-small internal leakage comes from its high accuracy. We use 3 points to benchmark HydraForce in terms of manufacturing quality. 1. This hydraulic needle valve is processed with OKK ultra precision machine tool and nano level CNC system, with a processing accuracy of 0.01-0.3μm. The shape and profile accuracy is 0.003 - 0.1μm. It laid a good foundation for accuracy. 2. In terms of equipment maintenance, before machining, the shaft accuracy is detected, and after the test data is obtained, the accuracy is compensated to ensure the consistency of the processing accuracy of the components. This link requires tips and engineers with at least 15 years of industry experience. 3. In terms of accuracy detection, the German Diatest small pore diameter measuring instrument is used to detect the valve hole of each hydraulic needle valve. The minimum measurement accuracy range can reach 0.1μm. AAK hydraulic needle valves, with internal leakage less than 20% of HydraForce, you can also try a small order! https://www.aakindustry.com/info-det , ail/hydraulic-needle-valves-aak329

Caleb is from a hydraulic equipment company in Canada, and has cooperated with AAK on several high requirements of hydraulic relief valves, but he is not satisfied with the price of AAK. In May last year, Caleb’s company produced a batch of four column hydraulic presses, which need to purchase HydraForce standard hydraulic relief valves with performance requirements of not less than 2 million times. Caleb selected a hydraulic relief valve manufacturer in Ningbo and purchased 600 pcs of same model as HydraForce. 2 months after the equipment was sold, a customer complained that the piston rod of the four column oil press vibrated abnormally. During after sales service, it was judged that the hydraulic relief valve was faulty. After inspection, it was found that the valve spool and valve seat had leakage traces. The original manufacturer of the hydraulic relief valves reported that it was an isolated case, but 1 month later, there were more similar complaints, even the system was not under pressure, and the engineer found that the valve spool was stuck. The boss was very angry and asked Caleb to purchase the hydraulic relief valves of the same model and quality as HydraForce as soon as possible. Caleb contacted more than 10 suppliers of hydraulic relief valves and required that the quality should be benchmarked with HydraForce. Most hydraulic valve manufacturers suggested that Caleb should directly purchase HydraForce products, because it was difficult to ensure that the hydraulic relief valve did not get stuck and had a service life of 2 million times. Caleb was a little worried. After wasting a week, Caleb contacted me and I told him that other hydraulic valve manufacturers suggested purchasing HydraForce valves directly, which was a good suggestion. Most manufacturers can't compare the manufacturing quality of HydraForce for this hydraulic relief valve. AAK has more than 98% confidence. If AAK hydraulic relief valves can not solve the abnormal vibration of the piston rod of the four column hydraulic press or the system has no pressure, then don't waste time on looking for manufacturers in Ningbo. After 45 days, AAK delivered 300 Hydraulic Relief Valves, and at the end of last year, another 900 pcs were re-ordered. Last week, the PO for this hydraulic relief valves came again. I joked that it seems that the sales volume of this equipment is gratifying. The boss should be happy. Caleb said that thanks to AAK hydraulic relief valves, the hidden danger of the equipment was solved. If only the original model of HydraForce was used, the boss would certainly look down on him. Now the boss has started to put him in a good position, and he will be promoted to be purchasing manager next week. The manufacturing quality of AAK hydraulic relief valve can be benchmarked with HydraForce, it is determined by the following 3 points: 1. In terms of equipment, Swiss high-precision machine tools and various independent fixtures upgraded and modified by AAK have eliminated human errors, and the accuracy of components is consistent, thus it is far better than peers. 2. In terms of production control, more than 30 years of experienced technicians are dedicated to handle the special machines. Sometimes, they can even judge the production status by listening to the sound of the machine only. Every production quality of the hydraulic relief valve is engraved in their minds. 3. In terms of quality inspection, Mahr cylindricity meter imported from Germany is used to check the quality. Through EasyForm software, the measurement results can be obtained accurately and quickly. With the help of the software, the workpiece can be quickly adjusted and aligned, so as to improve the measurement efficiency and ensure that the 100% concentricity of each hydraulic relief valve is consistent and completely free from jamming. AAK hydraulic relief valves, high precision, no jamming, you can also try a small order! https://www.aakindustry.com/info-det , ail/hydraulic-relief-valves-aak328

Hannelore is from Germany and has been engaged in procurement for many years. Their company is going to launch a new hydraulic injection molding machine, which uses hydraulic pressure control valves. He selected a hydraulic pressure control valve manufacturer who has been cooperating for 5 years to make samples, and emphasized that the geometric accuracy of the valve spool and valve sleeve needs to be within 1μm. The manufacturer said that he might not be able to achieve it, but Hannelore believed in the sample capacity of the manufacturer because there were similar cases before. After 45 days, the hydraulic pressure control valve was installed with the equipment and began to test run. However, the movement speed of the actuator of the equipment was unstable. The engineer judged that the hydraulic pressure control valve was not up to the standard. The actual problem was that the geometric accuracy of the valve spool and valve sleeve was not up to the standard, which led to the inflexibility of the hydraulic pressure control valves. The original manufacturer has surrendered, and it will be a waste of time to retest. Hannelore contacted more than 10 hydraulic valve manufacturers. They either have no reply, or said that they were only 80% confident. Hannelore had no time to bet on this 80% confidence, because the exhibition time was approaching. At this time, Hannelore was extremely worried. Hannelore found AAK Hydraulic Valve on Google, leaving a message: how much can the geometric accuracy of the valve spool and valve sleeve of the hydraulic pressure control valve be controlled. I replied directly, within 1.0μm, no problem. Hannelore sent the drawing of hydraulic pressure control valve and asked for AAK samples. After 40 days, AAK hydraulic pressure control valve samples were sent. After 10 days, Hannelore advised that the geometric accuracy of the valve spool and valve sleeve of each sample of AAK did not exceed 0.8μm. The prototype passed their test run is already on the way to the exhibition hall. Hannelore's depressed mood was finally released. I told him to have a drink in the evening and then just wait patiently for the good news of the exhibition. Last week, Hannelore told us that the exhibition effect was good. He ordered 800 hydraulic pressure control valves first, and emphasized that the delivery time should be on time and the quality should be the same as the trial order. I joked that these are the lowest level commitments in AAK. AAK hydraulic pressure control valves broke his concerns completely with 3 points: 1. Swiss high-precision honing machine, the geometric accuracy of valve spool and valve sleeve can be controlled within 0.8μm. With this precision foundation, there is no need to worry about the optimal range of the fitting clearance between the valve spool and the valve sleeve. 2. The Mahr cylindricity meter imported from Germany, through EasyForm software, the measurement results can be obtained accurately and quickly. With the help of the software, the workpieces can be quickly adjusted and aligned to improve the measurement efficiency and make the accuracy of each gap consistent. 3. AAK is the hydraulic valve supplier of 7 world top 500 enterprises, its service has been verified for a long time, both in terms of delivery date and manufacturing quality. AAK hydraulic pressure control valves, high precision, long life, you can also try it! https://www.aakindustry.com/info-detail , /hydraulic-pressure-control-valves- aak327

For a 6061-T6 aluminum hydraulic manifold block with 80 deep cavities and a wall thickness of 5MM, Brody asked 3 hydraulic manifold block manufacturers to make samples, but they all failed. AAK used 7075-T6 aviation aluminum to replace the conventional 6061-T6, breaking through the limitations of traditional processing, with guaranteed accuracy, reaching Ra0.2μm surface finish. We skillfully used abrasive flow processing technology to 100% remove burrs and helped Brody get out of trouble. Brody, a hydraulic customer from the United States, needed to develop a hydraulic manifold recently, which has high requirements on the hydraulic manifold block. The inner chamber is deep. There are 80 deep holes on the side of the inner wall, and there are many long and thin holes. It has big difficulty on process and requires high precision. Brody knew that this hydraulic manifold block was not simple, so he specially arranged 3 trustworthy hydraulic manifold block manufacturers to make samples at the same time, but the results were not satisfactory, either the scrap was high, or the inner hole stayed at Ra1.6μm. Brody didn't want to give up this order. Brody checked with 20 hydraulic manifold block manufacturers online and offline, but they were either silent or could not afford the difficulty of processing. Brody considered giving up. His friend Smith, also an old friend of AAK, recommended AAK to him. According to the drawing of the hydraulic manifold block sent by Brody, AAK engineers first responded that it was difficult. 3 days later, the processing process of the hydraulic manifold block was completed, but only 90% was sure. Brody did not hesitate and paid the development cost. 4 weeks later, AAK sent 3 hydraulic manifold block samples. 6 weeks later, Brody sent the PO for 300 pcs of hydraulic manifold blocks.   On the premise of ensuring dimensional accuracy, AAK broke through the limitation of traditional machining, and replaced 6061-T6 with 7075-T6 aviation aluminum material, which is not only good in toughness, but also more impact resistant in processing. The high strength can solve the hidden danger of 5mm wall thickness. In terms of inner hole finish, abrasive flow machining technology and semi fluid medium containing silicon carbide abrasive are used to guide the flow through the surface to be machined of the workpiece under a certain pressure, so that the abrasive can squeeze the material and remove it slightly. The operating parameters are adjusted as follows: machine pressure 14~224kg/cm ²； Silicon carbide sand particles with a diameter of 0.005~1.5mm shall be selected as the abrasive particles; The diameter of abrasive cylinder is 150~600mm.   New processing operation parameters ensure that the cutting uniformity of the abrasive flow on the machined surface is kept within 10% of the cutting amount, and the surface finish value can be reduced to about 1/10 of the original, reaching Ra0.2μm surface finish and low scrap rate.   AAK aluminum hydraulic manifold block, high-precision, burr free, welcome to try! https://www.aakindustry.com/info-d , etail/hydraulic-manifold-blocks-aak425

Santos is from Poland, and has been purchasing hydraulic cartridge valves from China for 2 years. Recently, they developed a hydraulic power unit that required 1.0μm accuracy hydraulic pressure control valve. He made samples from a hydraulic pressure control valve manufacturer that has been cooperating for 2 years. During equipment debugging, it was found that the hydraulic system's pressure supply was unstable, and the root cause was that the accuracy of the hydraulic pressure control valve spool and hole did not meet the standard, most of which were in 2μm. The original manufacturer of the hydraulic pressure control valve stated that he cannot afford this precision and has to surrender. Santos contacted other hydraulic pressure control valve manufacturers, but there was no result. His boss was not satisfied with the procurement efficiency, so Santos was in a worry. Santos browsed the AAK website on B2B and noticed a customer case of AAK hydraulic pressure control valves with high precision requirements. He emailed us to ask: Can AAK ensure that the accuracy of each hydraulic pressure control valve can be controlled within 1.0μm? After communication, we learned that we have an existing program for the hydraulic pressure control valve he needs. Despite Santos' complaints about higher prices than the original hydraulic valve manufacturer, he still tried ordering 30 hydraulic pressure control valves. Last week, Santos informed us via email that after installing the AAK hydraulic pressure control valve, the hydraulic system's pressure supply was stable. Their engineers were very satisfied with the accuracy of the AAK hydraulic pressure control valve, and none of them exceeded 1.0μm. Precision is the most important test of the quality of a hydraulic cartridge valve manufacturer, it is not only related to equipment, fixtures, technicians, but also highly related to the quality level of the manufacturer. AAK hydraulic pressure control valve, accuracy controlled within 1.0μm, the key lies in 1. precision machining + 2. detection. 1. In the process of component precision machining, AAK uses SUNNEN honing machine imported from the United States, with component accuracy controlled with 1.0μm. 2. In the component detection process, AAK uses the KEYENCE image measuring instrument imported from Japan, which is not only accurate but also efficient, and 100% detects the accuracy of each component. 3. In the finished product inspection process, each hydraulic pressure control valve is tested on a test bench, and its performance is guaranteed. AAK hydraulic pressure control valve, with precision and worry free performance, you can also give it a try! https://www.aakindustry.com/info-detai , l/pressure-control-valve-aak581