Offers to Sell

SKU Number: V111F002 Type: Frozen Food MOQ: 18 cases Barcode: 4718006820046 Shelf life: 12M Case Package: 100g x 112pcs Case Gross Weight: 11.6kg Case Size: 56.5cm x 36.8cm x 30.3cm Case Cuft: 2.225 Feature of Product: In the abundant land of the southern country, YuMiSanXiang adheres to the belief of using natural raw materials, abandoning affordable and commonly used concentrated juices, and insisting on the original juice extraction, making every mouthful full of fresh and natural and unique aroma of passion fruit.

SKU Number: V246F010 Type: Frozen Food MOQ: 2 cases Barcode: 722537657785 Shelf life: 8M Case Package: 90g x 115pcs Case Gross: Weight: 10.2kg Case Size: 50cm x 40cm x 30cm Case Cuft: 2.119 Feature of Product: We also take care of matcha lovers by recommending this pure matcha powder made from Shizuoka. It is filled with red bean paste and chewy white glutinous rice mixed with matcha sauce, emitting a rich and smooth matcha fragrance that will make you swoon and drool. Matcha lovers must have this!

UNIAXIAL-GEOGRID PRDOUCTS-TENSILE STRENGTH 100-200 MPA,GOOD QUALITY AND GOOD PRICE. Uniaxial geogrid is a type of geogrid made from a single, linear network of polyester or polymers. It is designed to reinforce soil when stretched lengthwise along the sheet. This geogrid is commonly used in civil engineering applications such as reinforcing roads, walls, and embankments. Uniaxial-geogrid has a high tensile strength and modulus( the ratio of stress to strain in a material under stress). Its tensile strength is 100-200 MPa, providing soil with an interlocking system for force bearing and diffusion. Structure and functions: Uniaxial geogrids are popularly made of high-density polyethylene (HDPE) with oblong hole meshes that are stretched and pressed into thin sheets. When laid in the soil, their interlocking effect creates an efficient stress transfer mechanism, allowing local loads to spread quickly and effectively over a larger area, reducing local damage stress and prolonging the project's service life.

Bi-axial Geogrids can be made from materials including plastic, polyester and fiber-glass by way of weaving, knitting, extruding or other method. Biaxial geogrid features equal strength in both longitudinal and transverse directions, creating an interlocking system that can effectively bear and diffuse forces throughout the soil. Biaxial geogrids are designed to spread loads over a large area, reducing excavation needs and providing an economical design. Their ribs interlock with the surrounding soil particles, increasing bearing capacity and reducing time and cost associated with placement and construction. Biaxial geogrids ribs thickness and unit weight Biaxial geogrids rib thickness (1mm) , 150g/m² Biaxial geogrids rib thickness (1.5mm) , 230g/m² Biaxial geogrids rib thicknesses (2mm) , 300g/m² Biaxial geogrids rib thicknesses (2.5mm), 350g/m² (The above is the estimated value, the tolerance is 1-2g/sqm) Application Biaxial geogrid provides a long-term resistance to deformation and enhances the bearing capacity of road and ground foundations, extending their service life, it is used to: 1, prevent caving in or cracks in the road or ground surfaces and keeps them looking neat and tidy. 2, stop culverts from cracking. 3, improve soil slope stability and prevents soil erosion. 4, reduce the required thickness of bedding layers, saving costs. 5, support slope vegetation mesh mats to green the environment. 6. replace metal mesh for coal mine shafts.

Steel plastic geogrids are composite geogrid materials with a steel wire wrapped within the HDPE (high-density polyethylene) mesh strips. Steel plastic geogrids feature high strength, low elongation, excellent corrosion resistance and anti-aging. Process: The steel-plastic composite geogrid is composed of high-tensile steel wires with polyethylene (PE) or other components, extruded to form high-strength, anti-pull strips with embossed surfaces and coating. Steel Plastic Geogrid Size: 3.95*5 Color: Black Width: 1-6m Length: 50-100m Tensile strength:20kn,30kn,50kn,80kn-200kN/m Material: HDPE,carbon steel wire Application: Expressway, railway, soft soil subgrade, retaining wall

POLYESTER GEOGRID-BIAXIAL POLYESTER(PET) GEO-GRIDS, UNIAXIAL PET GEOGRID, WARP KNITTED PVC COATED PET GEOTEXTILE Polyester geogrid, simplified as PET Geogrid, is manufactured from high molecular polyester multifilament yarns by warp knitting / weaving and coated with PVC. Polyester biaxial geogrid is mainly used for civil engineering such as highway, railway, hill side slope treatment, structural layers for construction and products for water conservancy projects. Using Method: 1. The paving surface for geogrids should be relatively flat. After the paving layer is accepted, longitudinal skewing should be prevented by first drawing a white line or hanging line according to the width of the geogrids in the paving layer, then beginning with paving. U-shaped nails should then be used to fix the end of the grating (4 nails per meter wide, with uniform distance). 2. After fixing the end of the geogrids, a laying machine or manual method should be used to slowly pull the grille forward to lay. Every 10 meters should be manually inspected and straightened once until a full section of the grille is finished before laying the next section; this process should be repeated. 3. Successive paving: Geogrid roll length should be used as a unit for paving section length. After paving a section of geogrids or river bank section, an overall inspection of the quality of paving should be conducted before proceeding to paving the next section. Uniaxial PET Geogrid with HDPE Coating We provide polyester geo-grid as primary reinforcement with HDPE coating for a design life of 120 years at 30°C. Geogrid Uniaxial PET with low density polyethylene sheath and ultimate tensile strength of 200kN/m. It offers ultimate tensile strength for reinforcement in flexible retaining wall etc. Polyester Biaxial Geogrids Polyester biaxial geogrids are characterized by high tensile strength, small fracture elongation, and a low creep coefficient. The temperature resistance range is -70 degrees Celsius to 180 degrees Celsius, and the geogrid is also resistant to UV radiation and microbial corrosion. The width can reach up to 6m, resulting in high tensile strength at low strain capacity. Longitudinal and transverse ribs work together to fully utilize the geogrid's embedded locking effect on the soil body. During production, the polyester geogrid is pressed with a rough pattern to enhance the roughness of the surface and improve the friction coefficient between the geogrid and the synthetic soil body. Polyester geogrids are not eroded by acid, alkali, salt solutions, and oil at room temperature, do not dissolve in water or succumb to microbial attack, and can withstand UV light and oxygen erosion. Furthermore, the junction will not crack or break due to the synergistic force of the longitudinal and transverse ribs. In actual engineering, after compaction of the filler, it meets permanent engineering construction needs.

Fiberglass geogrid is an excellent geosynthetic material for asphalt pavement reinforcement and road base strengthening. This type of goegrid is a semi-rigid mesh product with high tensile strength and low elongation in both warp and weft directions, and it has excellent properties such as high temperature resistance and aging resistance. It is widely used for asphalt pavement, cement pavement and road base reinforcement, railroad road base, dam slope protection, airport runway, sand control, and other engineering projects. This allows it to be used, and rutting, which ultimately solves the issue of asphalt pavement being difficult to strengthen. Fiberglass geogrid to use in paving overlay to strengthen road surfaces, resist cracks Specification: Fiber glass geogrid,100 kN/m,300 C fusion point Fiberglass grogrid is laid over concrete roadway crack, then over lay with 2 to 3 inches of asphalt. Fiberglass geogrid-4x4mm or 5x5mm geogrid fiberglass fabric without adhesive to put into an epoxy matrix. Fiberglass Geogrid Mattress for construction project in a bituminous concrete parking area Customized specifications 1) Fiberglass Geogrid with asphalt coated 40kn x 40kn 2)Fiberglass Biaxial Geogrid of min. 80 KN.m tensile strength, used as a reinforcement layer in asphalt road pavement. 3)Fibra de vidrio Geogrid/tela del geotextil, geogrid fiber glass mat with asphalt. 4)Fiber glass geogrid with tensile strength ≥ 50 kn for use in Panama.

Polypropylene geogrid is a high-strength reinforced geosynthetic material made of polypropylene (PP), extruded, stretched in one or two directions, or ultrasonically welded. It has a tensile strength of up to 50kN/m. It's usually 3m-6m wide and 50m long. Mainly two types according to construction: polypropylene PP biaxial-geogrids, PP uniaxial-geogrid. Polypropylene geogrids have many advantages, including high strength, a stable structure, anti-aging, and corrosion resistance. It is mainly used in highways, railroads, slope protection, large landfills, and other soft soil engineering reinforcement, enhancing the bearing capacity of the soft soil foundation, preventing surface cracking, collapse, and providing easy construction and reduced maintenance costs. It can also be commonly used as double-tensioned plastic mesh mine roof for underground coal mines and polypropylene PP geogrid as fire retardant safety nets for protection. PP geogrid Color:Black or Customer's Request Tensile strength: 15KN-50KN Raw Material: Polypropylene Plastic Mesh Size: 33*33mm 39*39mm 65*65mm Usage: Soil Reinforcement Length:50-100m/roll Width-Unia , xial:1-2.5-3m Width-Biaxial:3-6m PP Biaxial Geogrid: Roll size: 3.95m by 50m or 5.90m by 50m or customized. PP-biaxial warp-knitted geogrid reinforcement for railroad and soft ground Polypropylene (PP) Geogrid specifications for Railways: Material Polypropylene (PP): Ultimate tensile Strength:20Kn/m (min) Material Polypropylene (PP): Ultimate tensile Strength:30Kn/m (min) Square hole pp mesh geogrids 30mm square hole PP Geogrid, mesh thickness app. 3 mm Packaging 4mtr x 200mtr on roll Colour: Black Bi-Axial Geogrid material for our project in Oman. Material: Bi-axial oriented PP geo-grid Tensile Strength: 20 kN/m Mesh size: 40x40 mm Width: 2 m Thickness: 1 mm Multi axial PP Geogrid Rolls Tensile strength: 15-50kN/m Width: 2/3.95/5.9m Length:50/100m Package: Rolls

Background Coefficient of friction is the amount of friction existing between two surfaces. A low value of coefficient of friction means less force is required for sliding to occur. A higher value means more force is required. COF will be different depending on the materials that are interacting with each other. Packaging film COF refers to the level of 'slip' that the packaging material has when interacting with different parts of packaging machine or materials. Controlling COF is importance in optimizing performance and avoiding problems in forming, transporting, and storing of packages. COF can be affected by several factors including antiblock additives, corona treatment, antistats, inks, varnishes, adhesives. Application Coefficient of Friction Tester COF-01 is for the measurement of static and kinetic coefficients of friction of plastic films, sheets, rubber, paper, paper board, woven and non-woven, fabrics, metal-plastic composite belts for communication cables, convey belts, wood, coatings, brake pads, windshield wipers, shoe materials and tires. By modification, it could be used for many other types of materials and test standards. Standards ASTM D1894, ISO 8295, TAPPI T816, GB 10006

Minimum Order: 1 bags

The stainless steel induction heating solid solution bright annealing furnace is widely used in a stainless steel welded pipe production line, In the manufacturing process of the stainless steel pipe, the diameter of the pipe is Φ6 and Φ273mm, which is suitable for stainless steel SUS304, 316, 316L, etc. The online running speed is adjustable from 0 to 10M/min, the heating temperature is set according to the material of the solution treatment, and the advanced infrared temperature measuring automatic detection system and the synchronous solution refrigeration system are equipped with the advantages of simple operation, multi-function, multi-protection, multi-display, and integrated self-contained water cooling system. need not be equipped with external water cooling device. The steel pipe is heated by all-solid-state IGBT induction heating power supply, which has the characteristics of small occupied area, light weight, low working voltage, high safety factor, low high-frequency radiation, low noise, low failure rate, low maintenance difficulty, and the like. The control system is controlled by PLC imported from Germany. Large-screen display made in Taiwan can be used to visually understand the operation status and fault condition of the equipment. The whole machine is equipped with various protection measures to greatly improve the stability and reliability of the equipment and complete the interlocking control and protection functions with the production line. The bright heat treatment process avoids the environmental pollution caused by the traditional pickling treatment process, and aims at eliminating the structural defects of stainless steel, reducing the hardness, improving the performance of steel and restoring the plastic deformation capability of the steel to meet the processing requirements. The induction heating power supply is used to heat the stainless steel tube to the temperature above its phase change temperature (austenitic stainless steel generally does not exceed 1100 degrees centigrade) and then cool down after a certain time. Generally for protective atmosphere annealing, the purpose is to avoid oxidation caused by the surface of the regeneration of iron oxide scale, so commonly known as bright annealing. The bright continuous heat treatment furnace mainly consists of a heating part and a cooling part. In order to meet the requirements of welding different pipes, an independent support frame device is designed, on which heating and quenching systems are installed. The support frame can adjust the height of the center line of the bright heat treatment device. The quenching chamber connected to the sealing bush of the heating coil is completely closed, and the water is cooled on the outer surface, while inside the tube, a conductive medium with high heat conductivity rapidly transfers heat from the stainless steel tube to the outer water cooling chamber surface. The whole quenching process is carried out under the control of the protective atmosphere to ensure that the brightness treatment can be continued before the outlet temperature. At the same time, the equipment adopts intelligent ignition system to monitor the flame state at any time. Because the furnace body adopts front and rear sealing and the air path is reasonable, the bright reaction is quick, the number of black pipes is reduced, and the consumption of protective gas is greatly saved for users. A heating sensor designed to increase heating efficiency includes an atmosphere sealing bush containing a controllable protective gas for preventing contamination from the external environment. The direct water quenching device plays a very important role in keeping the consistency of product size. and the length of quenching is kept to a very small extent.

Minimum Order: 1 bags

The application of stainless steel profiles in engineering construction is based on the good corrosion resistance of stainless steel, so that the structural members can permanently maintain the integrity of the engineering design. Chromium-containing stainless steel also combines mechanical strength and high elongation, making it easy to process and manufacture parts that can meet the needs of architects and structural designers. After the first successful practical application, the stainless steel profiles have the standard specifications of stainless steel Angle, flat and square steel. Stainless steel profiles are stainless steel materials with different cross- section shapes made by hot melt extrusion of stainless steel rods. The production process of stainless steel profiles mainly includes three processes: casting, extrusion and coloring. Among them, coloring mainly includes: oxidation, electrophoretic coating, fluorocarbon spraying, powder spraying, wood grain transfer printing and other processes. Stainless steel Angle steel: Gauge ∠10 mmX 10mm-∠150mmX150mm. Stainless steel flat steel, stainless steel square steel: specification 10mmX10mm-7 50mmX750mm. Stainless steel profiles are mainly used in industrial production and manufacturing, such as automated mechanical equipment, the skeleton of the shell, and various companies according to their own mechanical equipment requirements, such as conveyor belts, lifts, dispensing machines, testing equipment, shelves, etc. It is mostly used in the electronic machinery industry and clean rooms.

Minimum Order: 1 bags

1. Reduced corrosion resistance due to damage or contamination. Corrosion may occur where the film has been damaged, and other forms of contamination are present that prevent the natural re-formation of the passivated film. All the beneficial properties of stainless steel can be destroyed during processing, such as heat treatment or machining, such as welding, cutting, sawing, drilling and bending. As a result of these treatments, the oxide protective film on the stainless steel surface is usually damaged or contaminated, making it impossible to achieve spontaneous and complete passivation. As a result, localized corrosion may occur, even under conditions where corrosion is relatively weak. When used, it can result in an unsatisfactory end product, or even worse, the failure of critical systems. A: Welding causes accelerated oxidation on the inside, outside and near the weld. Oxidation is visible because there are areas of discoloration, and the color is related to the thickness of the oxide layer. Compared with the oxide layer on the stainless steel before welding, the oxide layer in the discolored zone is relatively thick, and the composition changes (containing less chromium), which reduces the local corrosion resistance. For the inside of the tube, oxidation and discoloration can be minimized by using proper backwashing methods. After welding, post-welding treatments such as pickling and grinding are usually required to remove oxides (color) and restore corrosion resistance. Color charts are often used to determine whether a weld needs pickling based on color grade. However, this decision is subjective, and in principle each color indicates the presence of oxidation and the affected oxide layer, thus reducing corrosion resistance. B: Mechanical treatment usually uses mechanical or non-mechanical contaminated surfaces. Organic pollutants can be caused by lubricating oil. Contact with tools can lead to inorganic contaminants such as foreign iron particles. Plaque is often caused by surface contamination of all kinds. In addition, foreign iron particles may cause galvanic corrosion. Pitting and galvanic corrosion are local forms of corrosion that initially require water treatment. Therefore, surface contamination usually reduces the corrosion resistance of stainless steel. 2. Surface treatment. In order to prepare the surface, remove discoloration and restore corrosion resistance, there are many post-treatments and methods. Here again we should distinguish between chemical and mechanical methods. Chemical methods are: pickling (soaking, with pickling paste or pickling spray), auxiliary passivation (after pickling) and electrolytic polishing. Mechanical methods are: sandblasting, glass or ceramic pellet shot blasting, painting, polishing. While all methods produce welded joints, no mechanical post-treatment will provide corrosion properties suitable for harsh applications. Use chemical methods to remove oxides and other contaminants from surfaces, while using mechanical methods to potentially remove contaminants from previously removed, polished, or erased materials. All kinds of pollution, especially foreign iron particles, can be a source of corrosion, especially in humid environments. Therefore, mechanically cleaned surfaces are best cleaned regularly under dry conditions. After pickling, it is important to properly rinse with water to remove all contaminants and pickling residues. The final rinsing should be done with softened water to avoid calcium stains and contaminants embedded in the growing oxide layer, which is necessary to build the passivation layer. In addition, due to the use of chemical methods (pickling and electrolytic polishing) to improve corrosion resistance, iron dissolves faster in pickling solutions and electrolytes than other metals. According to this, the surface is enriched with chromium and becomes more durable. Therefore, chemical methods of pickling and electropolishing are the only post-treatment methods that can restore the corrosion resistance of stainless steel in the weld and other surface damage that occurs before welding. This is actually independent of the type of stainless steel, there is no difference between the effect of pickling by soaking in the tank and using pickling paste or spray.

Minimum Order: 1 bags

LINYI ZHONGPING is a professional supplier of health care products and medical consumables. Our company was established in 2010 as a local manufacturer of health care products in Shandong Province. ※Our Product Our products are Underpad, Pet Pad, Adult Diaper, Adult Pull-ups, Sanitary Pad, Non-woven. ※Product Application Hospital health care, Home health care, Female care, Infant care, Pet care ※Production Equipment Our company has 15 production lines consisted of underpad, adult diaper, adult pull ups, sanitary pads, Non woven, PE film. And we have 3 sets of testing machine. ※Production Market Our market mainly include North America, Europe and many other countries and regions.

Minimum Order: 20000

Table Size (mm) 900x400 Number of Axes 6 Table Travel (X) (mm) 3000 Table Travel (Y) (mm) 400 Other attributes Condition New No. of Spindles 6 Type VERTICAL Weight (T) 0.01 T Table Travel (Z) (mm) 1000 Positioning Accuracy (mm) 0.0075 Repeatability (X/Y/Z) (mm) 0.005 Spindle Motor Power(kW) 5.5 Min. Time of Tool Change(s) 4 Tool Magazine Capacity 16, 20 Key Selling Points Automatic Warranty 3 months Place of Origin Guangdong, China Applicable Industries Machinery Repair Shops, Manufacturing Plant, Construction works , Other Showroom Location None Marketing Type New Product 2023 Machinery Test Report Not Available Video outgoing-inspection Not Available Warranty of core components 3 months Core Components Other Spindle Taper ISO40 Dimension(L*W*H) 25*50*55 CNC Control System GSK, FANUC, KND, Siemens Range of Spindle Speed(r.p.m) 50 - 60 r.p.m Max. Table Load(kg) 20 kg Feed Speed(mm/min) 20 - 50 mm/min Brand Name JGH Voltage 220V/380V Product name five-aixs linkage machine tool CNC or Not CNC Systemn Keywords Vmc Machine Center Color Custom-made Features High Precision Economical Trade Terms FOB Brand JGH Product type Cnc 3/4/5 Axis Machine Material Cast Iron Packing foam+carton Packaging & delivery Package Type: Foam + Carton/Foam + Wooden Case Supply Ability Supply Ability 5000 Piece/Pieces per Month

Minimum Order: 1 bags