Electronics & Electrical

AUS The optical cable structure is to place the 250μm colored optical fiber in a PBT loose tube, with two non-metallic reinforcements as reinforcement and support, and a layer of PE outer sheath extruded on the surface. The optical cable is small in size and light in weight Two RRPs as reinforcements provide good tensile properties Dry or oil-filled, good water-blocking properties Affordable price, high fiber capacity Suitable for short-span overhead or underground laying

MPO-MTP MPO (Multi-fiber Push On) fiber optic patch cord is composed of connectors and optical cables. It is a high-density fiber optic transmission patch cord. MPO connector is one of the MT series connectors. It is a multi-core and multi- channel plug-in connector. The MT series ferrules are precisely connected with two guide holes with a diameter of 0.7mm on the left and right of the ferrule end face and the guide pin (also called PIN pin). Compared with other connectors, the most important features of MPO connectors are compact design and a large number of jumper cores. MPO connectors have the same size as SC connectors, but can accommodate 12 or 24 optical fibers. Therefore, MPO can greatly save cabinet wiring space. At present, MPO connectors have 8-core, 12-core, 24-core, 48-core, 72-core, and 144-core designs. Among them, 12 and 24-core MPO patch cords are more common. 40G MPO- MPO fiber optic patch cords generally use 12-core MPO multimode ferrules; 100G MPO-MPO fiber optic patch cords generally use 24-core MPO ferrules. The MPO fiber optic connector contains optical fiber, sheath, coupling assembly, metal ring, pin, dust cap, etc., and the pin part is divided into male and female forms. The male connector has two PIN pins, while the female connector does not. The connection between MPO connectors is precisely aligned through PIN pins. When docking the connectors, the spring installed at the tail of the ferrule will provide a thrust to the ferrule to lock it with the adapter. There is a "key" on one side of the connector body, which is divided into "convex and concave" to limit the relative position of the connector, that is, P1, P2, etc. There is a mark called a "white dot" on the side of the connector body to specify the insertion side of the connector.

GJPFBH-4B1.3 The GJPFJV optical cable structure is based on tight-buffered optical fiber as the basic unit. Multi-core bundled cables are used as sub-units and twisted into a round shape with FRP, and then extruded into a PVC (or LSZH) sheath to form a cable. Dry water-blocking materials are placed in the gaps between the cable core and the sheath. Each sub-cable contains aramid reinforced fiber, which has good bending properties, does not contain grease, is hygienic and clean, and is easy to construct and connect. The optical fiber in the sub-cable adopts a tight-buffered design and has independent reinforcement elements and sheaths to prevent damage caused by environmental and mechanical stress. Low-smoke, low-halogen, flame-retardant sheaths are flame-retardant and self- extinguishing, suitable for indoor environments such as computer rooms, cable shafts, and wall wiring. Low-smoke, halogen-free, flame-retardant polyolefin sheaths are UV-resistant, waterproof and mildew-proof, and resistant to environmental stress cracking, and there is no acid gas release, and it does not corrode computer room equipment. It is suitable for indoor and outdoor use or indoor environments that require a high flame retardant level (such as ceiling wiring, open wire wiring, etc.). Product Application: Indoor horizontal wiring, vertical wiring in buildings, LAN network. The standard fiber core can be directly installed with connectors for connecting to equipment. The tail cable used as the backbone network can be directly connected from the outdoors to the indoors, eliminating the junction box, isolating lightning, and improving system reliability.

GJYXCH/GJYXFCH The GJFJV optical cable structure is to evenly apply multiple strands of aramid or high-strength glass yarn on the outside of multiple c900μm or ф600μm tight-buffered optical fibers for reinforcement, and then extrude a PVC (or LSZH) outer sheath. Small outer diameter, light weight, flame retardant, easy to strip, low attenuation, high flexibility. Tight-buffered optical fiber cables can be directly connected without transition joint boxes and pigtails, and no need to clean waterproof grease, so the laying cost is low. Product Application This optical cable is suitable for indoor wiring. Suitable for pigtail jumpers and jumpers Suitable for optical connection of communication equipment and optical instruments Suitable for floor connection and easy maintenance

GYTC8S-12B1.3 The structure of GYTC8S 53 optical cable is to put single-mode or multi-mode optical fiber into a loose tube made of high modulus plastic filled with waterproof compound. The center of the cable core is a metal reinforcement core. For some optical cables with a certain number of cores, a layer of polyethylene (PE) is extruded outside the non-metallic reinforcement core. The loose tube is twisted around the central reinforcement core to form a compact and round cable core, and the gaps in the cable core are filled with water- blocking compounds. After the plastic-coated steel belt is longitudinally wrapped, a polyethylene inner sheath is extruded, and the double-sided plastic- coated steel belt is longitudinally wrapped and extruded into a polyethylene outer sheath to form a cable. Double sheath and double armor structure, better water blocking effect. Application: Suitable for trunk power transmission system. Access network and local area network in places with high electromagnetic interference. Features: Good flexibility and bending performance. Small outer diameter, light weight, easy installation. 100% cable core filling.

GJFJKH-1B The optical cable uses 900μm tight wrap. The tightening buffer layer is wrapped with spiral steel wire, then the steel wire is wrapped with Kevlar yarn, and finally the optical cable is completed with LSZH as the outer sheath. Application: used for jumpers and plug-ins. Used for optical connection of optical communication rooms and optical distribution frames. Used for optical connection of optical instruments and equipment. Features: good mechanical and environmental properties. Flame retardant performance meets the requirements of relevant standards. Mechanical properties meet the requirements of relevant standards. Soft, flexible, easy to splice, large data transmission capacity. Anti-rat, anti-ultraviolet.

GYFTY-24B1.3 The structure of GYFTY optical cable is to put 250u optical fiber into a loose tube made of high modulus material, and the loose tube is filled with waterproof compound. The center of the cable core is a glass fiber reinforced plastic (FRP), and the loose tube and (filler) are twisted around the central reinforcing core to form a compact and round cable core. The gaps in the cable core are filled with water-blocking fillers. A layer of polyethylene sheath is squeezed on the outside of the cable core to form a cable, suitable for: pipeline/overhead. Application: Suitable for outdoor power distribution. Suitable for trunk power transmission system. Access network and local area network in high electromagnetic interference places. Features: Good mechanical properties and high temperature resistance. Grease filling, non-metallic reinforcement, loose tube layer twisting. Suitable for backbone network, metropolitan area network, access network and power system in high-voltage areas. No metal structure, excellent anti-electromagnetic ability.

GJFH-12B Indoor mini bare fiber cable, inner 250um bare fiber, outer sheath is PVC, LSZH Application: used for indoor wiring, especially for cable breaking. As the lead wire of communication equipment. Suitable for the communication equipment served. Universal mini indoor optical cable. MPO and MTP connectors can be used. Features: Indoor distribution, suitable for making jumpers and pigtails. Multiple cables with independent strength components. Non-metallic center reinforcement. High-strength Kevlar fiber yarn components.

Indoor optical cable GJFJV, also known as indoor multi-core micro optical cable, uses multiple colored optical fibers as optical transmission media, coated with a layer of aramid as a force-reinforced unit, and extruded with a flat polyvinyl chloride (PVC) or low-smoke halogen-free material (LSZH, low- smoke, halogen-free, flame-retardant) sheath. It has the following excellent characteristics: 1. It uses colored 0.9 tight-packed optical fiber with high integration 2. Aramid reinforcement components make the optical cable have excellent tensile strength 3. Excellent anti-twisting performance 4. The outer sheath material has the advantages of corrosion resistance, waterproof, UV protection, flame retardant, and environmental protection 5. All-medium structure, not affected by electromagnetic interference 6. Rigorous processing technology and scientific and reasonable design

Detailed Product Description 1) Designed specifically for SMD carrier tapes from 8mm to 44mm 2) Colors available: yellow and red 3) Cutting tool is specially designed for precise cutting of SMD carrier tapes prior to splicing.Copper fastener and SMT special joint tong. 4) Special for siemens feeders Advantages: 1.Component splicing plier tool for smt tapes 2. Holds tapes and clamping splicing clip 3. Ideal for Siemens feeders

Minimum Order: 1 bags

Professional SMT Copper Brass Splice Stapler type Frame Clip for connection of carrier tape Detailed Product Description Features: 1. Bandolier type clip used with Splice tool and tape of any width 2. Guarantees a secure connection of SMT component reels 3. Increase SMT Pick and Place Machine output by 5% to 30% 4. Name:Professional SMT Copper Brass Splice Stapler type Frame Clip for connection of carrier tape

Minimum Order: 1 bags

Professional SMT Copper Brass Splice Single Clip for connection of carrier tape Features: 1. Single type clip used with Splice tool and tape of any width 2. Guarantees a secure connection of SMT component reels 3. Increase SMT Pick and Place Machine output by 5% to 30% 4. Name:Professional SMT Copper Brass Splice Single Clip for connection of carrier tape

Minimum Order: 1 bags

SMT production line machine smt splice trolley cart Detailed Product Description The SMT feeder is an innovation of SMT feeder. It can move 360 degrees rotary feeder and automatic feeder. It is made of tool steel with high wear resistance and high hardness. It can ensure no fault pressing of 500 thousand times.

Minimum Order: 1 bags

SMT sawtooth position of scissors This scissors with a positioning mould for 8 mm strip, can be precisely cut in the middle of the two components, and fore and aft cut open after the connection is very consistent, two positioning needle spacing for 4 mm all the time, not cut due to material problems to ensure feida tapes. Features: easy to operate, cutting precision, durable! SMT splice pliers is used for crimping splicing shims and brass splice clip. The splice clip pliers is an ideal plier tool for crimping smt splice clip. The smd splice tool is ususally used together with splice cut tool, smt cutting tool, or smd reel cutter. Thanks zoey@jinchensmt.com

Minimum Order: 1 bags