Electronics & Electrical

Ferroniobium an iron alloy with niobium and iron as its principal components. It also contains impurities such as aluminum, silicon, carbon, sulfur and phosphorus. According to the content of niobium alloy is divided into FeNb50, FeNb60, FeNb70. The iron alloy produced from niobium tantalum contains tantalum and is called niobium tantalum iron. Iron niobium and niobium-nickel alloys are used as niobium additives for iron and nickel alloys in vacuum smelting. Require low gas content, low harmful impurities, such As Pb, Sb, Bi, Sn, As, etc. 2×10-6, so the title "VQ"(vacuum mass), such as VQFeNb, VQNiNb and so on. The niobium-ferromanganese alloy produced in China (NB10% ~ 15%) is used as alloying agent for low alloy steel and niobium treatment agent for carbon steel. If you want to buy bulk ferro alloys and get the latest price, please feel free to contact us! Specification of Ferro Niobium Chemical Composition% Brand FeNb70 FeNb60-A FeNb60-B FeNb50-A FeNb50-B Nb+Ta 70-80 60-70 60-70 50-60 50-60 Ta 0.8 0.5 0.8 0.8 1.5 Al 3.8 2 2 2 2 Si 1.5 0.4 1 1.2 4 C 0.04 0.04 0.05 0.05 0.05 S 0.03 0.02 0.03 0.03 0.03 P 0.04 0.02 0.05 0.05 0.05 W 0.3 0.2 0.3 0.3 - Ti 0.3 0.2 0.3 0.3 - Cu 0.3 0.3 0.3 0.3 - Mn 0.3 0.3 0.3 0.3 - As 0.005 0.005 0.005 0.005 - Sn 0.002 0.002 0.002 0.002 - Sb 0.002 0.002 0.002 0.002 - Pb 0.002 0.002 0.002 0.002 - Bi 0.002 0.002 0.002 0.002 - Application of Ferro Niobium Ferroniobium is mainly used for smelting high temperature (heat resistant) alloys, stainless steel and high strength low alloy steel. In stainless steel and heat-resistant steel, niobium carbonates stably with carbon in the steel. It IS DISTRIBUTED UNIFORMLY ON THE GRAIN boundary OF STEEL, prevents the grain growth of steel at high temperature, plays a role in refining the structure of steel, and can improve the strength, toughness and creep properties of steel. The chemical affinity of niobium and carbon is much greater than that of chromium and carbon. Therefore, when there is niobium in stainless steel, chromium carbide can be prevented from precipitate at the grain boundary of steel, thus improving the corrosion resistance of steel. The niobium and nitrogen in the steel form stable niobium nitride, which improves the corrosion resistance of the steel surface. Niobium in steel and oxygen to form stable niobium oxide, so that the surface of the steel to form niobium oxide film, can prevent oxygen to the interior diffusion and play the role of oxidation. Adding NB0.015% ~ 0.05% to carbon steel can refine the structure and make the steel have good formability and welding performance. Niobium strongly prevents the austenite recrystallization of steel, so that steel rolling can be effectively controlled at higher temperature, and the effect of strengthening and toughening is very remarkable. So niobium as a microalloying element in carbon steel dosage greatly increased. Production Process of Ferro Niobium Ferroniobium has been produced by traditional thermite process since 1965. In the early 1990s, the process of producing niobium iron by semi - continuous self - heating reduction was established. The reactor for thermite smelting is fixed and equipped with a furnace cover. The slag and niobium iron produced by the reaction are discharged from the furnace. The prepared raw materials will be loaded into the designated cylindrical bin with the material tank. Features of Ferro Niobium 01. Niobium plays the role of solution strengthening and carbide precipitation strengthening in superalloy, which can improve the yield strength and surface stability of superalloy. 02. The weight of niobium is one of the lighter refractory metals, which is also one of the factors in the large use of superalloys. 03. The coercivity properties of permanent magnet alloy can be improved by adding niobium. The addition of niobium in cast iron is helpful for spheroidization and formation of pearlite structure. It plays a role in breeding and refining the casting structure. 04. Niobium can improve the strength, toughness, hardness and service life of castings at high temperature. If you want to know more about ferro niobium price, please contact us.

Ferro molybdenum is a ferro alloy composed of molybdenum and iron, generally containing 50-60% molybdenum, is used as an alloy additive for steelmaking. Its main use is as an addition of molybdenum in steelmaking. Adding molybdenum to the steel can make the steel have a uniform fine-grained structure, and improve the hardenability of the steel, which is beneficial to eliminate temper brittleness. Contact our ferroalloy company for ferro moly price today! Specification of Ferro Molybdenum FeMo composition (%) Grade Mo Si S P C Cu FeMo70 65-75 2 0.08 0.05 0.1 0.5 FeMo60-A 60-65 1 0.08 0.04 0.1 0.5 FeMo60-B 60-65 1.5 0.1 0.05 0.1 0.5 FeMo60-C 60-65 2 0.15 0.05 0.15 1 FeMo55-A 55-60 1 0.1 0.08 0.15 0.5 FeMo55-B 55-60 1.5 0.15 0.1 0.2 0.5 Application of Ferro Molybdenum The biggest application of ferromolybdenum lies in the production of ferroalloys according to the content and range of molybdenum. It is suitable for machine tools and equipment, military equipment, oil refinery oil pipes, load-bearing parts and rotary maneuvers. As one of the types of refractory metals, Ferromolybdenum is also used in cars, trucks, locomotives, ships, etc. In addition, ferromolybdenum is used in stainless steel and heat-resistant steel is employed by synthetic fuel and chemical plants, heat exchangers, generators, refinery equipment, pumps, turbine tubes, ship propellers, plastic and acid storage vessels. Tool steels have a high proportion of ferromolybdenum in the range and are used for high speed machining parts, cold work tools, drills, screwdrivers, dies, chisels, heavy castings, balls and drills for rolling mills, rolls, cylinder blocks, piston rings. Production Process of Ferro Molybdenum The main raw material of ferro molybdenum smelting is molybdenite (MoS2). Molybdenum concentrate is usually roasted by multi-chamber furnace before smelting to obtain roasted molybdenum ore with sulfur content less than 0.07%. Ferric molybdenum smelting generally adopts the out - furnace method. The furnace is a cylinder placed on a sand base, lined with clay bricks, and used as reducing agent ferrosilicon 75% silicon and a small amount of aluminum granules. After the charge is added to the barrel once, it is smelted by the upper ignition method. An initiator (saltpeter, aluminum shavings or MAGNESIUM shavings) is applied to the material surface. After ignition, there is a fierce reaction, followed by sedation, slag discharge and tube removal. Ferromolybdenum ingot is first cooled in the sand nest, then sent to the cooling room for flushing and cooling, and finally broken and refined. The metal recovery was 92~99%. Molybdenum oxide block is widely used to replace ferric molybdenum in steel making industry in recent years. Features of Ferro Molybdenum 01. Ferro molybdenum is an amorphous metal additive in the production process that has a variety of good properties that can be transferred to new alloys. 02. One of the main advantages of ferric molybdenum alloy is its hardening properties, so that steel welding is very strong, ferric molybdenum is one of the country's 5 high melting point metals. 03. In addition, the addition of ferric molybdenum alloys can improve corrosion resistance. The properties of ferric molybdenum make it an extra protective film over other metals and suitable for a variety of products.

Ferroalloy is a general term for alloys composed of iron and silicon, manganese, chromium, titanium, tungsten, molybdenum, tantalum, niobium and other elements. It cannot be used to cast parts directly, but only as a reducing agent or additive in the casting or steelmaking process. Ferro alloys commonly used in casting are ferro tungsten, ferromolybdenum, ferrovanadium, ferroniobium,ferrosilicon and ferromanganese. Ferroalloy is one of the essential raw materials in iron and steel industry and casting industry. Its main uses: one is as a deoxidizer, remove excess oxygen in liquid steel; The other is as alloying element additive to improve the quality and performance of steel. HSG ferroalloy company offers a good ferro alloys price. Contact us and bulk ferroalloys! Different Types of Ferro Alloys From HSG 01 Ferro Tungsten Tungsten is a kind of iron alloy mainly consisting of tungsten and iron. It also contains impurities such as manganese, silicon, carbon, phosphorus, sulfur, copper, tin, etc. It can be used as alloy agent in steelmaking. According to the various content of tungsten, tungsten and iron are divided into: FeW75 and FeW80. How is Ferro Alloy Produced and Manufactured? There are many production methods of ferroalloys, most of which are produced by pyrometallurgy. According to the smelting equipment used, operation method and heat source, it is mainly divided into the following categories: According to the refractory metal suppliers production equipment, it can be divided into blast furnace method, electric furnace method, out-of-furnace method, converter method and vacuum resistance furnace method. According to the different heat sources, it is divided into carbothermal method, electrothermal method, electrosilicon thermal method and metal thermal method. According to the different production and operation process characteristics, it is divided into flux method, solvent-free method, slag-free method, slag- containing method and continuous and batch smelting methods. Benefits of Using Ferro Alloy 01 Deoxidizers Ferromanganese and ferrosilicon are the most widely used deoxidizers in steelmaking. Strong deoxidizers are aluminum (aluminum iron), calcium silicon, silicon zirconium, etc. (see deoxygenation of steel). 02 Alloy Additives The common varieties used as alloy additives are: ferromanganese, ferrochrome, ferrosilicon, ferrotungsten, ferromolybdenum, ferrovanadium, ferrotitanium, nickel-iron, niobium (tantalum) iron, rare earth iron alloy, ferroboron, ferrophosphorus, etc. 03 Inoculant Ferroalloys are added into molten iron before casting to improve the crystalline structure of cast iron. In addition, it is also used as a reducing agent for the production of other ferroalloys and non-ferrous metals by metal thermal reduction. Alloy additives for non-ferrous alloys; Small amounts are also used in the chemical industry and other industries. High Purity Refractory Metal For Different Industries Your Vision, Our Mission

Cobalt Metal for Sale Cobalt is a shiny steel-gray metal, relatively hard and brittle, ferromagnetic, heated to 1150℃ magnetic disappear. The combined valence of cobalt is 2 and 3. It does not interact with water at room temperature and is stable in humid air. It is oxidized to CoO when heated to more than 300℃ in the air, and burned into Co3O4 when white hot. The fine cobalt metal minor powder produced by hydrogen reduction can spontaneously ignite into cobalt oxide in air. Specification of Cobalt Metal Chemical Composition Co:99.95 C: 0.005 S<0.001 Mn:0.00038 Fe:0.0049 Ni:0.002 Cu:0.005 As:<0.0003 Pb:0.001 Zn:0.00083 Si<0.001 Cd:0.0003 Mg:0.00081 P<0.001 Al<0.001 Sn<0.0003 Sb<0.0003 Bi<0.0003 Application of Cobalt Metal Cobalt metal is mainly used to make alloys. Cobalt-based alloy is the general term for an alloy made of cobalt and chromium, tungsten, iron, and nickel. The wear resistance and machinability of the tool steel with a certain amount of cobalt can be significantly improved. Starlite carbide with cobalt-50 or more will not lose its original hardness even if heated to 1000℃. Today, this kind of carbide has become the most important material used between gold-cutting tools and aluminum. Production Process of Cobalt Metal The methods of extracting cobalt from cobalt-containing materials can be divided into full fire process, full wet process and combined fire and wet process. Modern cobalt extraction mostly uses a combined process. (1) Full fire process. It was widely used before the 1940s, and now only the Panda cobalt plant in Zaire uses electric furnace to melt copper and cobalt alloys. (2) Full wet process. It mainly includes the pressurized acid leaching, ammonia leaching, sulfuric acid leaching, nitric acid leaching and chlorination leaching of various materials containing cobalt. (3) Joint process. It can be roughly divided into two cases: one is to use sulfation roasting (copper and cobalt concentrate, pyrite), reduction roasting (laterite ore), arsenic removal roasting (arsenic and cobalt concentrate) and other simple fire treatment, and then leaching with acid or ammonia solution; The other is in the process of copper, nickel, zinc and other metals smelting process, cobalt enrichment as an intermediate, and then wet treatment. Due to the complexity of cobalt extraction materials, there is no "standard" or traditional process for cobalt metallurgy. However, no matter what process is used, the final production of cobalt metal generally adopts wet process, which is a major feature of cobalt metallurgy. The production of metallic cobalt from intermediate products containing cobalt obtained by various processes is usually done by drilling electrolysis or hydrogen reduction. Features of Cobalt Metal 01. There are 13 isotopes of cobalt, but only 59Co is found in nature. The artificially produced isotope 60Co has a wide range of uses. 02. The stable crystal shape of cobalt at room temperature is hexagonal dense packing, while the stable structure above 673K is face-centered cubic. 03. Cobalt is a ferromagnetic substance, similar to iron and nickel in hardness, tensile strength, mechanical properties, thermodynamic properties and electrochemical behavior. If you want to know more kinds of refractory metals, please visit our website.

Chromium Metal for Sale Chrome, white, generally exists in the form of chromium iron compounds in the nature, the iron black or dark brown, block shape, dot, lenticular, ribbon, etc. Chromium is a very versatile metal. Chromium is a silver-white metal that is refractory (melting point 1800℃) and has a specific gravity of 7.1, about the same as iron. Chromium is the hardest metal! Chromium is usually brittle because it contains hydrogen or traces of oxides. Extremely pure chromium is not brittle and malleable. Contact us for minor metal prices! Specification of Chromium Metal Metal Chromium Lump / Cr Lmup Grade Chemical Composition % Cr Fe Si Al Cu C S P Pb Sn Sb Bi As N H O ≧ ≦ JCr99.2 99.2 0.25 0.25 0.1 0.003 0.01 0.01 0.005 0.0005 0.0005 0.0008 0.0005 0.001 0.01 0.005 0.2 JCr99-A 99 0.3 0.25 0.3 0.005 0.01 0.01 0.005 0.0005 0.001 0.001 0.0005 0.001 0.02 0.005 0.3 JCr99-B 99 0.4 0.3 0.3 0.01 0.02 0.02 0.01 0.0005 0.001 0.001 0.001 0.001 0.05 0.01 0.5 JCr98.5 98.5 0.5 0.4 0.5 0.01 0.03 0.02 0.01 0.0005 0.001 0.001 0.001 0.001 0.05 0.01 0.5 JCr98 98 0.8 0.4 0.8 0.02 0.05 0.03 0.01 0.001 0.001 0.001 0.001 0.001 -- -- -- Application of Chromium Metal Chromite has a melting point as high as 1900 ℃-2500 ℃, it retains volume at high temperatures, and with any slag unresponsive. So as refractory materials, chromium can be to used for furnaces and non-ferrous metal smelting furnace lining. Chromium is one of the world's most of hard metal. Chromium is often mixed into steel to make a hard and corrosion-resistant alloy. Most of the world's chromium, are used to produce various kinds of alloy. Stainless steel contains more than 12% chromium (some contain 13% chromium and 8% nickel). Stainless steel has excellent toughness and mechanical strength. Production Process of Chromium Metal The method of producing electrolytic chromium from electrolytic chromium monoammonium and alum aqueous solution was reported many times from 1946 to 1950. The semi-industrial test was completed and the production technology of electrolytic chromium was established. In 1932, a. e. van Arkel reported that high purity chromium (Cr99.99%) was obtained by thermal decomposition of cr iodide for special use. China began to develop chromium metal in 1958. Jinzhou ferroalloy Plant was built into China thermite Chromium Metal Production Plant on the basis of semi-industrial experiments in the early 1960s. In order to reduce the chromium damage and improve the chromium recovery rate, the method of chromium hydroxide was used to produce chromium oxide. In 1959, electrolytic chromium was produced by chromium-ammonium alum aqueous electrolysis method in Jilin Ferroalloy Factory. Features of Chromium Metal 01. Chromium is a brittle metal can not be used as a metal material alone, but with iron, nickel, cobalt, titanium, aluminum, copper and other components of the alloy, it becomes a thermal resistance, thermal strength, wear resistance and special properties of engineering materials. 02. Chromium metal is used as an alloying agent in the production of various nickel or cobalt-based superalloys, titanium alloys, aluminum-based alloys, resistance alloys, and copper alloys. 03. Some are used to produce stainless steel and heat-resistant steel. These materials are widely used in aviation, aerospace, nuclear reactor, automobile, shipbuilding, chemical, military and other industries. As a refractory metal company, we can offer kinds of related products for sale, if you have needs, please contact us.

A LED filament light bulb is an LED lamp that mimics a typical incandescent light bulb with visible filaments for aesthetic and lighting distribution reasons while utilizing light-emitting diodes, which have a high efficiency (LEDs). TOPSTAR Filament LED bulbs have many advantages. High lumen output efficiency is a feature. similar to an incandescent lamp's sparkling light effect. Lower maintenance expenses and longer lifespan. Energy savings of up to 85% when compared to incandescent lighting. providing almost the same amount of light as an incandescent bulb. By putting each product through testing for the best performance and safety, TOPSTAR upholds the highest standards for all of our goods. For optimal eye comfort, these lights give instantaneous strong light without buzzing or flickering. A National Enterprise Technology Center and a state-of-the-art laboratory are also features of TOPSTAR. Because of its excellent technological capabilities, TOPSTAR can create and produce items of the highest caliber for our clients. Types of Filament LED Lamp Filaments A19 Bulb Filaments A21 Bulb Filaments A23 Bulb Filaments ST19 Bulb Filaments ST64 Bulb Filaments G25 Bulb Filaments G16.5 Bulb Filament Candle Bulb  How Do LED Filament Bulbs Work? 01 The light source structure of the LED filament bulb The light source structure of the LED filament bulb is mainly composed of multiple parts, including the connection parts of the lamp holder, the base, the driving power supply, and the lamp beads. In the course of work, LED filament bulbs are mainly based on stone substrates, and then supplemented by highly transparent lampshades. 02 LED Filament Light Bulb Gets Heat When the current of the LED filament light bulb passes through the filament (tungsten filament, the melting point is more than 3000 degrees Celsius), heat is generated. The spiral filament continuously gathers heat, making the temperature of the filament above 2000 degrees Celsius. The iron can shine like a light. The higher the temperature of the filament, the brighter the light emitted.) How to Choose Filament LED Bulbs? LED lights are unquestionably more environmentally friendly and energy- efficient than conventional incandescent lighting. Since their widespread use over the past ten years, LED lights have been shown to provide an increasing number of benefits. Currently, specialists are concentrating on a few particular LED applications, such as how to increase the beam angle of LED chips. Previously, LED bulbs might have a beam angle of 120° or even 180°, but it is very challenging to have a greater beam angle. Traditional lamps have a 360° beam angle, which means they spread light in all directions. It's really wonderful if LED lights can radiate light in all directions at once. Therefore, using an LED filament bulb as a replacement for conventional lamps is a really good idea. Because LED filament bulbs employ 360° LED FILAMENTS rather than LED BEADS as its light source, they produce 360° all-directional lighting. The gold wires that connect the LED CHIPS in the LED filament package, which is mounted on a rectangular substrate, allow for electric conduction. To get ideal LED filaments that emit 360° lights, phosphor coating will be applied to the surface of the LEDs. If you are looking for a reliable led lighting company, please choose us, and we will be your best partner.

Minimum Order: 3000

LED DECO B35/C35 filament candle light bulbs, advanced automatic production, direct manufacture from China, high quality promise and long lifespan warranty. Specification of Filament Candle Bulb Bulb Power Lumen CRI Equivelence Lamp Base Beam Angle Lifespan Dimmable Certification B35/C35 2.5W 200lm 90 25W E12/E26 290° 15000 Yes UL/ES/CEC/FCC/DOE/ROHS B35/C35 2.5W 200lm 90 25W E12/E26 290° 15000 Yes UL/ES/CEC/FCC/DOE/ROHS B35/C35 3.5W 300lm 90 40W E12/E26 290° 15000 Yes UL/ES/CEC/FCC/DOE/ROHS B35/C35 3.5W 300lm 90 40W E12/E26 290° 15000 Yes UL/ES/CEC/FCC/DOE/ROHS B35/C35 5.5W 500lm 90 60W E12/E26 290° 15000 Yes UL/ES/CEC/FCC/DOE/ROHS B35/C35 5.5W 500lm 90 60W E12/E26 290° 15000 Yes UL/ES/CEC/FCC/DOE/ROHS What Are Filament Bulbs Used For? LED DECO B35/C35 Filament Bulbs work well with a variety of applications, such as ceiling lights, wall lights, vanity lights, kitchen lights, closet lights, porch light fixtures, etc, also can be seperately installation in a E12 & E26 base for lighting. As a professional China led lighting factory, by green health lighting products, Topstar Lighting is a led disk light manufacturer integrating research and development, production and sales.

Minimum Order: 3000

TOPSTAR LED+ Dusk to Dawn Bulbs, Sunlight Sensors, Soft White, Automatic On/Off Light Sensing Bulb, A19, PAR38 Light Bulbs Specification of Dusk to Dawn Auto Sensor Light Bulb A19+PAR38 Item Voltage Power Lumen PF Dimmable CRI Base Life PAR38 Dusk to Dawn 120V 15 1200 0.5 NO 80 E26 15,000H A19 Dusk to Dawn 120V 9 800 0.5 NO 80 E26 15,000H A19 Dusk to Dawn 120V 15 1600 0.5 NO 80 E26 15,000H What Are A19 Dusk to Dawn Used For? This bulb is damp rated and dust-tight to provide reliable bright light in any weather. It is suitable for outdoor applications such as covered driveways, patios, porches, decks or in string light decorations. Now the price of led light wholesale is reasonable, if you have needs, please contact us.

Minimum Order: 3000

Wholesale Aluminum Foil Adhesive Tape Feature: Alu Foil as backing, coated with hot melt adhesive. High tack and good temperature. Application: Widely used for sealing and joining and HVAC industry. Specification of Aluminum Foil Tape With Hot Melt Product Adhesive Carrier Thickness Peel Adhesion Tensile Strength Finished roll Size (μm) (N/in) ASTM D-3330(oz/in) (N/in) ASTM D- 3759(lb/in) A115 Hot Melt 12 ≥12 43 ≥17 4 48mmx25m 48mmx50m A118 Hot Melt 17 ≥12 43 ≥20 5 48mmx25m 48mmx50m A120 Hot Melt 20 ≥14 54 ≥22 5 48mmx25m 48mmx50m A125 Hot Melt 22 ≥16 58 ≥25 6 48mmx25m 48mmx50m A130 Hot Melt 26 ≥16 58 ≥30 7 48mmx25m 48mmx50m A135 Hot Melt 32 ≥19 69 ≥35 8 48mmx25m 48mmx50m A140 Hot Melt 36 ≥19 69 ≥40 9 48mmx25m 48mmx50m Applications of Aluminum Foil Tape With Hot Melt Aluminum Foil Tape With Hot Melt can be used for a variety of applications, such as pipe sealing, joining, and HVAC industries. It is perfect for sealing joints and seams against moisture and vapor, insulation, and patching hot and cold air ducts, sealing aluminum and fiberglass duct boards, and sealing and patching FSK systems. As an adhesive products company, we will provide more kinds of related products for sale, anything you need, please contact us.

Minimum Order: 15000

Dusk to Dawn Sensor+2CCT Selectable Filaments Bulbs with an extra photocell adaptor or socket. The sensor bulb with built in photocell sensor parts will detect the light intensity, Automatic turn On at night, turn off in daytime, Solve your problem at forgetting turn off light when left home in daytime and no light when back home in the evening. Specification of Dusk to Dawn Sensor+2CCT Selectable Filaments Bulbs Item Voltage Power Lumen PF Dimmable CRI Base Life A19-Filaments Dusk to Dawn + 2CCT 120V 8 800 0.7 NO 80 E26 15,000H A19-Filaments Dusk to Dawn + 2CCT 120V 13 1600 0.7 NO 80 E26 15,000H A19-Filaments Dusk to Dawn + 2CCT 120V 8 800 0.7 NO 90 E26 15,000H A19-Filaments Dusk to Dawn + 2CCT 120V 13 1500 0.7 NO 90 E26 15,000H What Are A19-Filaments Dusk Till Dawn LED Bulb + 2CCT Used For? Invisible built-in light sensor parts, you will not see any extra components, nice look and same shape as traditional bulb, built-in sensor parts not request any installation direction to detect light, more convenient used for different fixture: porch garage patio hallway, front door light. As one of led lighting manufacturers, we can offer sorts of decorative led light bulbs for sale, if you are interested, please leave us a message.

Minimum Order: 3000

TOPSTAR Motion Sensor Light Bulb, it is maximize energy saving,Premium Quality and More Powerful. Specification of Dusk to Dawn+PIR Sensor A21 and PAR38 Plastic Lamp Item Voltage Power Lumen Beam Angle CRI Base Life Battery A21 120V 8W 760lm 180° 80 E26 15000H Item Voltage Power CRI Beam Angle Life Cap Certification Motion PAR38 1200lm 15W 80 40° 15,000h E26 UL Motion PAR38 1100lm 14W 90,R9＞50 40° 15,000h E26 CE C What Are The PIR Motion Detector Light Bulb Used For? Wide Application: The PIR motion detector dusk to dawn lamp bulb widely used corridors, channel, patio, warehouse, bathroom, toilet, basement, stairway, hallway, porch, garage, driveway. As one of led lighting suppliers, we can offer sorts of led smart light for sale, if you are interested, please leave us a message.

Minimum Order: 3000

The dual spectrum Led grow light bulbs have two gears, which are switched by a dip switch. Topstar has selected high quality and efficient led and high-end chips. They can speed up photosynthesis in plants. Under the irradiation of these lamps, the plants will grow healthily, blossom and yield fruit well. The heat dissipation of these led grow light bulbs is efficient, enable the grow light bulbs working fine and long-lasting. They can be used for 25000 hours. These products meet the certification requirements. Topstar guarantee the quality. Types of Dual Spectrum LED Grow Light Dual Spectrum LED Grow Light Bulb A19+, 120V, 9W, E26  Dual Spectrum LED Grow Light Bulb BR30, 120V, 9W, E26  Dual Spectrum LED Grow Light Bulb PAR38, 120V, 28W, E26  The wave length range that plants can absorb and utilize is mainly in 400- 800nm. This dual spectrum grow light is a mixture of red and white light. These can promote photosynthesis in plants better and faster, and then plants will grow faster and healthier. Dual Spectrum VS LED Grow Light Dual spectrum LED grow light bulbs offer one more option than led grow light bulbs. The another stall of dual spectrum LED grow light bulbs is more suitable for flowers and fruits indoor. The PPE and PPF of dual spectrum LED grow light A19+ and BR30 is the same as LED grow light. As a led lighting company, we can offer kinds of new led lighting for sale, if you have needs, please contact us.

Minimum Order: 3000

Several Color Temperature Selectable: Easy CCT selection with the slider switch, simply try out the various color temperatures to suit the look and feel of your room, then lock in your selection during the installation. 3-5 color temperature selectable, no need to worry about what color temperature to buy, eliminates the hassle of returning or exchange products due to inappropriate color temperature An Ideal Choice for Household Lighting: Can be used as floor lamps, recessed downlights, pendant lamps in different scenarios such as reading room, bed room and living room. UL: We uphold the highest standards for all our products by testing each product for optimal performance and safety. Our bulbs provide instant bright light and no buzzing or flickering for maximum eye comfort. Energy Saving: Lower your energy consumption instantly (up to 85%) by converting to LED! Topstar CCT light bulb are a sustainable choice by offering a longer lifetime than traditional bulbs (halogen, incandescent, fluorescent) and reduced relamping costs. Types of CCT Lamp Bulb 5CCT Selectable A19 Plastic Bulb 5CCT selectable A19 bulb& 3CCT selectable BR30 &3CCT selectable PAR 38, E26 Medium base, UL/ES/CEC/T20 Certified.  3CCT Selectable BR30 Plastic Bulb Three-tone CCT changeable, energy saver, high-performance, high quality promise and long lifespan warranty.  3CCT PAR38 Plastic Bulb This CCT-select light bulb can be used to replace a standard 150-Watt incandescent or halogen bulb. Use these long lasting bulbs in fixtures anywhere. The motion detection feature is a great addition to any space.  How To Choose A CCT Bulb? Colour temperature generally ranges from 2700-3300K (warm) to 3300-5300 (cool) – and 6500K is daylight. Cool white can be better for concentrating or seeing detail. Warm white light is considered good for relaxing. you can simply switch the button on the light to choose the colors you need before installation. How CCT Bulbs Work? Choose color temperature to tune your bulb to your preferred color setting. Easy CCT selection with the slider switch on the product. Simply try out the various color temperatures to suit the look and feel of your room, then lock in your selection during the installation. As a led lighting factory, we can offer kinds of led light bulbs for sale, if you have needs, please contact us.

Minimum Order: 3000

Model Number:UIYBDC6466A1T2 Frequency Range:1.0~2.0GHz Bandwidth:Full Insertion Loss:0.6dB Isolation:17dB VSWR:1.4 Forwar , d Power:100W Reverse Power:100W Connector Type:TAB Temperature:+10~+70°C Dimension:64 , *66*26mm

Minimum Order: 1 bags