Electronics & Electrical

Nema17 2Phase Stepper Motors nema 17 motor nema 17 stepper motor with encoder 2 Phase Stepper Motors supplier NEMA 17 1.8 degree, High torque, Low noise, Step Angle: 1.8°, NEMA17, 42x42mm Features: STEP ANGLE:  1.8° FLANGE SIZE:  42mm HOLDING TORQUE: 0.19-0.75Nm High Torque Low Heat High Stability Share this entry NEMA 17 hybrid stepper motor series motors are high-performance, low-cost stepper motors made by ICAN using high-quality core materials. It has the advantages of high torque, low heat generation, and good running stability.  Our company has strict quality control to ensure high-quality batch consistency of motors. This series of stepping motors are stable and reliable, with superior performance parameters. Torque is the rotational equivalent of linear force, forms part of the basic specification of a motor. The torque of the motor refers to the torque output by the motor from the crankshaft end. It reflects the load capacity of the motor within a certain range. High torque is mainly attributed to many factors including rare earth magnets, optimized rotors, Stators with maximum winding fill, and laminations, all of which are combined together to realize maximum torque. Increase the output torque of the stepper motor, which means that the efficiency of the motor is higher, and is available without increasing the drive voltage or current. Improved manufacturing process enables all components of the stepper motor to achieve better matching and a more stable internal structure. Effectively reduce the vibration and noise of the motor during operation. With the advanced current control technology of IRELIA MR series drives, which makes ICAN stepper motor stand out by providing lower noise and smoother operation The high-strength die-casting end cover design and the low-loss stator lamination design make the stepper motor better thermal conductivity. The optimized stator slot full rate makes the stepper motor generate lower heat and faster heat conduction, thereby greatly reducing the temperature rise of the motor. ICAN Technology Co., Ltd is a high-tech enterprise, which is committed to developing, designing, and manufacturing stepper motor, BLDC motor, motor driver, closed-loop system, and gearbox. Since founded in 2009, we have serves in many applications, such as CNC routers, laser cutters/engravers/markers, 3D printers, electronics equipment, medical equipment, packaging equipment, AVG, textile machines, robotics, and pick-and-place devices. Till now, there are many clients of ours in the world, such as the U.S.A, Italy, Korea, Spain, France, Japan, etc. Our website: ican-motor.com

Nema34 2Phase Stepper Motors stepper motors for sale Nema34 stepper motor supplier High torque, Low noise, Step Angle: 1.8°, NEMA34, 85x85mm Features: Nema 34 stepper motor cnc kit STEP ANGLE:  1.8° FLANGE SIZE:  85mm HOLDING TORQUE: 3.4-12Nm, nema 34 12 nm Low Heat High Stability Share this entry Ican-Nema23 stepper motor Description Stepper series motors are high-performance, low-cost stepper motors made by ICAN using high-quality core materials. It has the advantages of high torque, low heat generation, and good running stability.  Our company has strict quality control to ensure high-quality batch consistency of motors. This series of stepping motors are stable and reliable, with superior performance parameters. Torque is the rotational equivalent of linear force, forms part of the basic specification of a motor. The torque of the motor refers to the torque output by the motor from the crankshaft end. It reflects the load capacity of the motor within a certain range. High torque is mainly attributed to many factors including rare earth magnets, optimized rotors, Stators with maximum winding fill, and laminations, all of which are combined together to realize maximum torque. Increase the output torque of the stepper motor, which means that the efficiency of the motor is higher, and is available without increasing the drive voltage or current. Improved manufacturing process enables all components of the stepper motor to achieve better matching and a more stable internal structure. Effectively reduce the vibration and noise of the motor during operation. With the advanced current control technology of IRELIA MR series drives, which makes ICAN stepper motor stand out by providing lower noise and smoother operation The high-strength die-casting end cover design and the low-loss stator lamination design make the stepper motor better thermal conductivity. The optimized stator slot full rate makes the stepper motor generate lower heat and faster heat conduction, thereby greatly reducing the temperature rise of the motor. ICAN Technology Co., Ltd is a high-tech enterprise, which is committed to developing, designing, and manufacturing stepper motor, BLDC motor, motor driver, closed-loop system, and gearbox. Since founded in 2009, we have serves in many applications, such as CNC routers, laser cutters/engravers/markers, 3D printers, electronics equipment, medical equipment, packaging equipment, AVG, textile machines, robotics, and pick-and-place devices. Till now, there are many clients of ours in the world, such as the U.S.A, Italy, Korea, Spain, France, Japan, etc. https://ican-motor.com/product/2phase- , stepper-motors-nema34/

Stepper With Spur Gearbox geared BLDC motor Geared stepper motor for sale This type of geared stepper motor has been optimized and is made of high- quality 0.35MM silicon steel sheet and rare earth magnetic steel. The air gap is small and the torque is large. It has the advantages of high anti-resonance characteristics and low heat generation. Features: High torque and low noise. Low-temperature rise and stable operation. Economical. Low speed with low vibration Customization is available Gearbox is a mechanical unit or component consisting of a series of integrated gears within a housing. In the most basic sense, a gearbox functions like any system of gears, it alters torque and speed between a driving device like a motor and a load. Spur gearboxes, smooth and quiet operation, wide range of gear ratios, long life, and maximum efficiency. The role of spur gearbox Stepper motors are known for their accurate positioning capabilities and high torque delivery at low speeds, but they require careful sizing to ensure the motor matches the load and application parameters, to minimize the possibility of lost steps or motor stalling. Adding a gearbox to a stepper motor system can improve the motor’s performance by decreasing the load-to-motor inertia ratio, increasing torque to the load, and reducing motor oscillations. Ican-Geared Stepper Motors Feature High torque and low noise. Low-temperature rise and stable operation. Economical. Low speed with low vibration Self-detection, over-current, over-voltage, under-voltage protection Customization is available Application ICAN geared stepper motor is widely used in cars, robots, packaging industry, automated production lines, and other automated equipment. Located in Dongguan city (“the world factory”), as a stepper motor manufacturer, stepper motor manufacturers, planetary gear reducer manufacturer, bldc motor manufacturer, we demonstrate our professionalism in OEM/ODM production in the past 9 years. If you are interested in stepping motor, please click here to visit our website. https://ican-motor.com/product , /stepper-with-spur-gearbox/

Planetary gear stepper motor geared bldc motor supply geared brushless dc motor planetary gear reducer manufacturer This type of planetary gear stepper motor has been optimized and is made of high-quality 0.35MM silicon steel sheet and rare earth magnetic steel. The air gap is small and the torque is large. It has the advantages of high anti- resonance characteristics and low heat generation. Feature High torque and low noise. Low-temperature rise and stable operation. Economical. Low speed with low vibration Self-detection, over-current, over-voltage, under-voltage protection Customization is available Application Ican-Geared Stepper Motors is widely used in cars, robots, packaging industry, automated production lines, and other automated equipment. ICAN Technology Co., Ltd is a high-tech enterprise, which is committed to developing, designing, and manufacturing stepper motor, BLDC motor, motor driver, closed-loop system, and gearbox. Since founded in 2009, we have serves in many applications, such as CNC routers, laser cutters/engravers/markers, 3D printers, electronics equipment, medical equipment, packaging equipment, AVG, textile machines, robotics, and pick-and-place devices. Till now, there are many clients of ours in the world, such as the U.S.A, Italy, Korea, Spain, France, Japan, etc. Our website: ican-motor.com

External Linear Stepper Motor stepper driver supplier Nema17 Closed Loop stepper motor The external linear actuators incorporate a rotary lead screw and an external translating nut Nema 17 lead screw stepper motor is a stepper motor with lead screw, it can be used in high-precision requirements Customization is available to base on the following parameters: Lead screw sizes, such as length, diameter, lead, and pitch Nuts material, such as POM, copper Motor leads, such as lengths, cables, and various connectors Encoders, brakes Waterproof, dustproof, and rustproof treatment ICAN Technology Co., Ltd is a high-tech enterprise, which is committed to developing, designing, and manufacturing stepper motor, BLDC motor, motor driver, closed-loop system, and gearbox. Since founded in 2009, we have serves in many applications, such as CNC routers, laser cutters/engravers/markers, 3D printers, electronics equipment, medical equipment, packaging equipment, AVG, textile machines, robotics, and pick-and-place devices. Till now, there are many clients of ours in the world, such as the U.S.A, Italy, Korea, Spain, France, Japan, etc. If you have any interest, contact us freely! Our website: ican-motor.com

Ican Non-captive Stepper Motor nema17 for printer nema 17 hybrid stepper motor Non-captive shaft linear actuator is to allow greater installation coaxially error Nema 17 lead screw stepper motor is a stepper motor with lead screw, it can be used in high-precision requirements Customization is available to base on the following parameters: Lead screw sizes, such as length, diameter, lead, and pitch Nuts material, such as POM, copper Motor leads, such as lengths, cables, and various connectors Encoders, brakes Waterproof, dustproof, and rustproof treatment Located in Dongguan city (“the world factory”), as a stepper motor manufacturer, stepper motor manufacturers, planetary gear reducer manufacturer, bldc motor manufacturer, we demonstrate our professionalism in OEM/ODM production in the past 9 years. If you are interested in stepping motor, please click here to visit our website. https://ican-motor.com

ICAN-Captive Shaft Stepper Motor nema 17 motor driver Hybrid Stepper Motors Compact structure, which needs no spline mechanical devices Nema 17 lead screw stepper motor is a stepper motor with lead screw, it can be used in high-precision requirements Customization is available to base on the following parameters: Lead screw sizes, such as length, diameter, lead, and pitch Nuts material, such as POM, copper Motor leads, such as lengths, cables, and various connectors Encoders, brakes Waterproof, dustproof, and rustproof treatment ICAN Technology Co., Ltd is a high-tech enterprise, which is committed to developing, designing, and manufacturing stepper motor, BLDC motor, motor driver, closed-loop system, and gearbox. Since founded in 2009, we have serves in many applications, such as CNC routers, laser cutters/engravers/markers, 3D printers, electronics equipment, medical equipment, packaging equipment, AVG, textile machines, robotics, and pick-and-place devices. Till now, there are many clients of ours in the world, such as the U.S.A, Italy, Korea, Spain, France, Japan, etc. If you have any interest, contact us freely! Our website: ican-motor.com

The backward pumping kneading block plays a role of adjusting the fullness of the material and extending the residence time of the material in the barrel during the material mixing. Its blocking force is weaker than the reverse feed screw sleeve, but slightly stronger than the 90 ° kneading block. Which area should choose the backward pumping kneading block? How to use it with the reverse screw sleeve in the full length? How many reverse elements should be selected for the full length of the screw? All of these questions are testing the experience and skill of the modification engineer, which has a considerable impact on the quality of the modified special material or masterbatch. For example, in the case of nylon (PA66) flame retardant enhanced modification, the first kneading zone must be stringed by four kneading blocks (such as 30 ° + 45 ° + 45 ° ++ 45 ° L), and must be finished by 45 ° L blocks Stuffing, the whole machine can stably plasticize and stably extrude the PA66, a strong crystalline plastic. Backward Pumping Kneading Block Technical Details of Backward Pumping Kneading Block Brand：LESUN Model：φ20 mm ~φ300 mm Material：38CrMoALA / W6Mo5Cr4V2 / HIP Properties: Wear-resisting, Corrode-resisting Application: Extruder Backward Pumping Kneading Block Function 1. Good peformance on shearing material. 2. Good mixing ability to support blending process. Processing Characteristics of Backward Pumping Kneading Block: 1. All component materials are purcharsed from professional material supplier. To ensure quality of raw materials, element and metallographic analysis are coducted. 2. All components are finished by CNC grinding. 3. Professional technical team can provide surveying and mapping business. Nanjing Lesun Screw Co.,Ltd is a professional screw and barrel manufacturer, we provide extruder screw, double screw, twin screw extruder parts, extruder components and etc. Want to know more? Please contact us.

Minimum Order: 2 barrels

The extruder open screw barrel are used in the feeding section, the natural exhausting section and the vacuum exhausting sections. Depending on the materials produced, the placement of the open barrel is different. The opening shapes can be square, rectangular, and round above the natural exhausting port and the vacuum exhausting port, and there must be a suitable "material stopper" arranged in the opening to reduce the return of material. Extruder Open Screw Barrel Technical Data of Extruder Open Screw Barrel Brand：LESUN Model：φ20 mm ~φ300 mm Material：38CrMoALA / W6Mo5Cr4V2 / HIP Properties: Wear-resisting, Corrode-resisting, Durable Application: Extruder Material & Properites for Extruder Open Screw Barrel 1.Bi-metal liner +45# steel cylinder: high wearability, extruder screw repair easily and cost-effective 2.N00 nitriding steel: good anti-corrosion performance 3.H6 or D11 : higher wearablity and corrosion resistance, easy to repair. Nanjing Lesun Screw Co.,Ltd is a professional twin screw barrel manufacturer, we provide compound screw, extruder screw, double screw, twin screw extruder parts, extruder spare parts and etc. Want to know more? Please contact us.

Minimum Order: 2 barrels

Barrel plays an importante role inside extruder. Barrel and screw elements are corporated each other to support extruder process smoothly. Extruder side open barrels have opening both at the top and side . The upper opening is for venting purposes. Technical Data of Extruder Side-Feed Barrels Brand：LESUN Model：φ20 mm ~φ300 mm Material：38CrMoALA / W6Mo5Cr4V2 / HIP Properties: Wear-resisting, Corrode-resisting, Durable Application: Extruder Material & Properites for Extruder Side-Feed Barrels 1.Bi-metal liner +45# steel cylinder: high wearability, repair easily and cost- effective 2.N00 nitriding steel: good anti-corrosion performance 3.H6 or D11 : higher wearablity and corrosion resistance, easy to repair. Nanjing Lesun Screw Co.,Ltd is a professional screw and barrel manufacturer, we provide extruder feed screw, compound screw, extruder screw, double screw, twin screw extruder parts, feed screw repair and etc. Want to know more? Please contact us.

Minimum Order: 2 barrels

Barrel plays an importante role inside extruder. Barrel and screw elements are corporated each other to support extruder process smoothly. Extruder side open barrels have opening both at the top and side . The upper opening is for venting purposes. echnical Data of Extruder Side-Feed Barrels Brand：LESUN Model：φ20 mm ~φ300 mm Material：38CrMoALA / W6Mo5Cr4V2 / HIP Properties: Wear-resisting, Corrode-resisting, Durable Application: Extruder Material & Properites for Extruder Side-Feed Barrels 1.Bi-metal liner +45# steel cylinder: high wearability, repair easily and cost- effective 2.N00 nitriding steel: good anti-corrosion performance 3.H6 or D11 : higher wearablity and corrosion resistance, easy to repair. Nanjing Lesun Screw Co.,Ltd is a professional screw and barrel manufacturer, we provide extruder feed screw, compound screw, extruder screw, double screw, twin screw extruder parts, extruder spare parts and etc. Want to know more? Please contact us.

Minimum Order: 2 barrels

Extruder Spare Parts for Plastic pelletizing Our components can operate in plastics industries, such as Injection processes, construction, automotive and packaging sectors - Extrusion processes: manufacturing of films, sheets, profiles, pipes and containers. Nanjing Lesun Screw Co.,Ltd is a professional screw and barrel manufacturer, we provide compound screw, extruder screw, double screw, twin screw extruder parts, extruder components and etc. Want to know more? Please contact us.

Minimum Order: 2 barrels

Tappet full automatic eddy current testing system is a full automatic crack hardness sorter that integrates light, electricity and machinery. The whole system includes a main control system, charging system and mechanical transmission system. The workpiece is sent to the area to be inspected by clamping and transverse moving. The workpiece surface is scanned by a point probe, which can inspect the outer circle, bottom surface and chamfered end surface of the tappet at the same time. At the same time, the system also supports automatic charging, automatic detection and automatic sorting. It can also be connected to the production line of the factory and can be selected for off-line automatic detection and sorting. Valve Tappet Eddy Current Flaw Detector QMTZET-04 Brief Introduction The tappet of the valve top-mounted gas distribution mechanism is generally made into a cylinder to reduce the quality. The roller type tappet is a kind of tappet, which has the advantage of reducing the lateral force against the friction caused by the friction. This kind of tappet is complex in structure and large in mass and is generally used on large-bore diesel engines. The tappet is usually made of nickel-chromium alloy cast iron or cold-alloy alloy cast iron, and the friction surface should be ground after heat treatment. There are three types of tappets: bacteria, cartridge, and roller. The automobile engine valve tap testing ndt is an important gasoline engine component. In the engine valve type gas distribution mechanism, it is composed of a valve group and a valve transmission group, and the tappet is a main component of the valve transmission group except for the camshaft. The valve tappet is the follower of the cam. Its function is to transmit the motion and force from the cam to the valve while also receiving the lateral force exerted by the cam and transmitting it to the cylinder head. In the course of service, the valve tappet fails to break in advance due to quality reasons, which causes the valve guide, valve and timing chain to break and fail successively. After the engine is turned off, the engine cannot be started, which eventually causes the engine to be scrapped. Eddy Current Testing Equipment ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals to detect. It is one of the NDT non-destructive testing methods in the industry. Why BKN NDT Testing Equipment The technology of BKN originated from eddy current Laboratory of Institute of Materials, Nanjing University of Technology. At present, it is a leading high- tech non destructive testing equipment suppliers in China. The company is committed to the development of eddy current, ultrasonic, magnetic flux leakage and various non-standard equipment, holding independent research and development of a number of national patents.

Minimum Order: 1 bags

There are two main types of ball studs: one is a combination of a spherical pin and an integral ball seat, and the other is a combination of a hemispherical ball pin and a spherical member. In the past, coil springs were used for preloading and compensating for wear. Nowadays, synthetic resin pellets with elasticity and lubrication are widely used, which reduces the cost and improves the steering stability. In addition, the material and shape of the dust cover, the type of grease, etc. have been greatly improved, the grease nipple has been eliminated, and a maintenance-free structure has been realized. The ball stud is mainly composed of an end cap, a ball pin, a ball seat and a dust cover. Ball studs are widely used in independent suspension systems, and the control arm or thrust rod is often connected to other components through a ball stud at the end. The main function of the ball pin is to achieve the up and down of the wheel and the steering movement. The ball studs eddy current sorter is a sorting machine with high practical value in industrial applications. As one of the professional manufacturers of vortex separators, BKN Automation will introduce you to this product in this article. QTXET-01 Ball Studs Eddy Current Sorting Equipment Performance Detection channel 2 channel Detection speed 10～20pieces/min Detection position Bulb and rod Workpiece surface state turning and extrusion Calibrated crack length 5 mm x width 0.01 mm x depth 0.2 mm High pass 0.1Hz～650Hz Low pass 1Hz～10000Hz Phase rotation 0-360° step1 ° Gain 0～99dB，step size 0.1dB Frequency ranges 10Hz～10MHz Sampling rate 1～200000SPS adjustment Probe drive 1%~100% adjustment Features of QTXET-01 Ball Studs Eddy Current Sorting Machine Synchronized alarm output controlled by an internal and external clock The high precision end, end to tail signal removal High precision real-time and delayed output Fast digital／analog electronic balance Memory track delay blanking function Real-time impedance display The instrument can match any probe Remote automatic help system The man-machine interface in Chinese and English Non-equal amplitude phase／amplitude alarm domain The range of impedance diagram is adjustable in 5 grades Why BKN NDT Testing Equipment The technology of BKN originated from eddy current Laboratory of Institute of Materials, Nanjing University of Technology. At present, it is a leading high- tech non destructive testing equipment manufacturers in China. The company is committed to the development of eddy current, ultrasonic, magnetic flux leakage and various non-standard equipment, holding independent research and development of a number of national patents.

Minimum Order: 1 bags