Offers to Sell

feel free to contact us by email or others website: www.mahkotamarine.com email : order@mahkotamarine.com Specifications E , ngine Model: C150AXC Engine Type: V6 66° E-TEC D.I. Bore x Stroke - in (mm): 3.386 x 3.100 (86 x 79) Displacement - cu in (cc) L: 167 (2744) 2.7L Gear Ratio: 2.17:1 Full Throttle RPM Range: 5400-6000 RPM Weight - lbs (kg): 541 (245) Starting: Electric Controls: iControl Digital Shift & Throttle Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode Alternator Output*: 133 Amps Total / 50 net Dedicated / 14 amps @ idle Steering: iDock Trim Method: Power Trim & Tilt Trim Range: -6° to 15° Tilt Range: 81° Shaft Length - in (mm): 25 (635) Lubrication: Multi-Point Targeted Oiling Oil Tank Capacity - gal (L): On-Engine 3 (11.4) / Accessory 1.8 (6.8), 3 (11.3) & 10 (37.85) Recommended Oil: Evinrude/ Johnson XD-100 Oil Recommended Fuel: 87 Octane Counter Rotation: Standard Warranty: 5-Year Engine** / 5-Year Corrosion Emissions Compliance: EPA 2013 / CARB 3 STAR / European Union Mounting Centers - in (mm): Minimum 26 (660) Color: Slate Gray with over 400 Color Panel Options Steering Angle: +/- 32° Integrated Features: Dual Axis Rigging / iTrim

Minimum Order: 1 bags

feel free to contact us by email or others website: www.mahkotamarine.com email : order@mahkotamarine.com Specifications < , br>Engine Type: Inline 4 Displacement: 1.8L Bore x Stroke: 81 x 88.9mm 3.19 x 3.5in Prop Shaft Horsepower: 115hp at 5500 rpm Full Throttle RPM Range: 5300 ~ 6300 Alternator Output at W.O.T.: 35 Amp Compression Ratio: 10.0:1 Fuel Induction System: EFI Weight*: 171 kg (377 lbs) Recommended Fuel: Octane 87 Recommended Engine Oil: Yamalube® 4M / (See owner's manual) Recommended Fuel Filtration: Yamaha 10-Micron Fuel / Water Separating Filter (external) C.A.R.B. Rating: 3-Star Exhaust: Through Propeller Intake: 16 Ignition: TCI Microcomputer Spark Plug: LKR6E Alternator Output: 35 Amp Starting System: Electric Lubrication: Wet Sump Engine Oil Capacity: 3.2/3.0L Recommended Cooling: Thermostatic Control Ethanol Blend Limit: 10% Maximum Gear Ratio: 2.15:1 Gear Shift: Forward, Neutral, Reverse Shaft Length: 20" Degree of Tilt: 70° Degree of Trim: -4° through +16° Dry Weight: 171 kg (377 lbs) Mounting Centers: 26" Steering Angle (maximum): 35° from center, either direction Warranty: Limited 3 Year Limited Pleasure Boat - 1 Year Limited Commercial

Minimum Order: 1 bags

feel free to contact us by email or others website: www.mahkotamarine.com email : order@mahkotamarine.com MODEL BF5DHS , HNA MODEL YEAR 2020 SKU BF5DHSHNA-20 WEIGHT 59.5 lb MANUFACTURER Honda COUNTRY OF MANUFACTURE China HORSEPOWER , 5hp SHAFT LENGTH 15" (Short) STEERING Tiller START , ING Manual TRIM & TILT Manual FUEL DELIVERY Carburetor FUEL TANK Internal CYLINDER(S) 1 DISPLACEMENT 127 cc (7.8 cubic inches) BORE AND STROKE 60 x 45 mm (2.4 x 1.8 in.) FULL THROTTLE RPM RANGE 5000-6000 RPM IGNITION SYSTEM Digital CDI INDUCTION SCAVENGING OHV VALVES PER CYLINDER 2 FUEL TYPE Unleaded Gasoline (87 octane) FUEL TANK / FUEL LINE Internal (1.5 L) with external connector OIL TYPE FC-W 10W-30 OIL CAPACITY Please inquire. LUBRICATION Wet Sump ALTERNATOR OPTIONAL 6 amp (installation required) COOLING SYSTEM Water Cooled SALTWATER RATED Yes GEAR RATIO 2.08:1 GEAR SHIFT Forward, Neutral, Reverse PROPELLER 7-7/8" Dia. x 7-1/2" Pitch 3-Blade Aluminum INTERNAL BATTERY No

Minimum Order: 1 bags

feel free to contact us by email or others website: www.mahkotamarine.com email : order@mahkotamarine.com MODEL 6MLH MODEL YEAR 2020 SKU 6MLH-20 , WEIGHT 58.0 lb MANUFACTURER Mercury COUNT , RY OF MANUFACTURE Japan HORSEPOWER , 6hp SHAFT LENGTH 20" (Long) STEERING Tiller STARTI , NG Manual TRIM & TILT Manual FUEL DELIVERY Carburetor FUEL TANK Internal CYLINDER(S) 1 DISPLACEMENT 7.5/123 BORE AND STROKE 2.32 x 1.77 FULL THROTTLE RPM RANGE 5000-6000 IGNITION SYSTEM CDI w/electric spark advance INDUCTION SCAVENGING OHV VALVES PER CYLINDER 2 FUEL TYPE 87 Octane (up to 10% ethanol content) FUEL TANK / FUEL LINE 0.3 US Gallon (1.15 liter) OIL TYPE Mercury 4-Stroke Outboard Oil OIL CAPACITY 450 mL / 15 oz LUBRICATION Wet sump ALTERNATOR Optional 12V 50W 4A (installation required) COOLING SYSTEM Water-cooled w/thermostat SALTWATER RATED Yes GEAR RATIO 2.15:1 GEAR SHIFT Forward-Neutral-Reverse (forward mounted shift lever) PROPELLER 7.7" Diameter X 8.0" Pitch 3-Blade Aluminum

Minimum Order: 1 bags

feel free to contact us by email or others website: www.mahkotamarine.com email : order@mahkotamarine.com 2019 AB VENTUS RIGID INFLATABLE BOAT 9 VL Boat Specifications LOA: 9'6" Beam: 5'7" Weight: 106 lbs Capacity: 4 persons or 1393 lbs Max Motor: 15 hp Short Rec Motor: 10 hp Short Tube Diameter: 17" Air Chambers: 3 Fabric Type: Hypalon Factory Warranty: 10 years Hull Dimensions: 8'10" x 3'7" x 1'6" Standard Features 3 point davit lifting rings, hand pump, bow and stern carry handles, bow tow rings (except 12'), removable seat, oars, rub rail, maintenance kit

Minimum Order: 1 bags

3/4 inch 1 inch EMT Conduit And Fittings Aluminum EMT conduit smooth treat Description: 3/4 inch 1 inch EMT Conduit And Fittings Aluminum EMT conduit smooth treat EMT conduit pipe is one of the lightest and thinnest threading pipe in American standard. The pipe head has no thread, and it is connected with set screw type connector which is mostly used in indoor decoration. Aluminum conduit, similar to galvanized steel conduit, is a rigid tube, generally used in commercial and industrial applications where a higher resistance to corrosion is needed. Such locations would include food procesing plants, where large amounts of water and cleaning chemicals would make galvanized conduit unsuitable. Aluminum cannot be directly embedded inconcrete , since the metal reacts with the akalise in cement. The conduit may be coated to prevent corrosion by incidental contact with concrete. Aluminum conduit is generally lower cost than steel in addition to having a lower labor cost to install, since a length of aluminum conduit will have about one-third the weight of an equally-sized rigid steel conduit. The main markets of EMT Aluminum conduit are Latin America, South America, America, dubai and other middle eastern countries Corrosion resistance long-lasting protection Approximately one-third the weight of steel, light weight. 10' lenghts, with special lenght available Easy to Install – Can be easily cut, bend without special tools Key words: ALUMINUM CONDUIT , ALUMINUM PIPE, ALUMINUM TUBE, EMT CONDUIT, EMT PIPE , EMT TUBE , ELECRICAL METALLIC TUBING.LIGHT WEIGHT CONFUIT. Applications: TOPELE EMT Aluminum conduit is designed to protect and route cables and conductors. It can be installed either exposed or concealed. Install it inside or outside using rain-tight fittings. This EMT CONDUIT is made of aluminum alloy, it has a strong corrosion resistance,and light weught help people wasy to intall. From thickness, TOPELE have standard and thiner for customer choose,the thickness can also be customized according to the customer's requirements. From the surface treatment, TOPELE have hot dipped Galvanized (HDG) and the Pre- galvanized.

feel free to contact us by email or others website: www.mahkotamarine.com email : order@mahkotamarine.com B&G Vulcan 12 Chartplotter/Fishfinder Display W/4g Radar Bundle Updated Features: C-MAP® Easy Routing and Navionics® Autorouting support Easy-to-interpret C-MAP Navigation Palette C-MAP® Easy Routing and Navionics® Dock-to-Dock Autorouting: You will navigate faster and easier with automatic route planning. Menu activated, the feature automatically plots the shortest and safest course based on a boat’s draft, beam and height, creating a route around a landmass and other fixed navigational hazards. Requires C-MAP MAX-N+ charts, Navionics+ or Navionics Platinum charts. C-MAP Navigation Palette: Enhances the readability of C-MAP charts, especially near shore, making it easy to tell where the boat is in relation to a channel, navaid, ledges and drop-offs, or a point of land The B&G Vulcan 12 is a great value, large screen sailing chartplotter designed for coastal cruising and club racing. This easy-to-use, intuitive 12-inch multi-touch screen is packed with B&G’s unique sailing features including SailSteer and RacePanel. Simply integrate with your existing system, expansion is simple as Vulcan is NMEA 2000®, Broadband Radar™, ForwardScan™ and autopilot ready; and features built-in 10Hz GPS and Wi- Fi.Easy-to-use B&G Vulcan has an easy-to-use, intuitive, multi-touch screen. Use the familiar pinch to zoom and swipe to pan actions to explore the many benefits to make your life on the water easier and safer; add waypoints and plan your route with ease. Dedicated Sailing features for cruising and racing With B&G’s award-winning sailing functions, you can see all of your key sailing data together on one screen, or overlaid on charts for the modern sailor’s ultimate navigational view. Simply add sailing instruments and sensors to activate B&G SailSteer, which will provide an intuitive graphic display of your Boat Speed, Wind data, Heading, Tide, Wind Shift Sectors and even Laylines. It’s easy to add waypoints or plot a course; and with B&G SailingTime you’ll see waypoint arrival times based on a sailing course and tidal effects, rather than a straight-line calculation. Simple integration Get more from your Vulcan by expanding your system via the industry- standard NMEA 2000® network. You can add sailing instruments and sensors, as well as autopilot, Broadband Radar™, ForwardScan™ or SonicHub™ to create a system to suit your needs. Vulcan can be used as a secondary autopilot controller providing easy access to Intelligent Sail Steering, manual and auto steering functions, and Smart Maneuver functionality combined with intuitive menus for ultimate control. B&G Broadband 3G™ or 4G™ Radar integrates with Vulcan to keep watch as you sail, with the ability to identify and track targets from 36 nautical miles away (4G) to right off the bow. With the addition of a ForwardScan™ transducer, you can see what lies ahead under the water with approaching depth information. Explore poorly-charted or unfamiliar waters confidently. Vulcan features built-in Wi-Fi and offers easy access to selected online services, including PredictWind weather forecasts and routing, via marina or smartphone hotspots. Or use the Wi-Fi to mirror the screen of your Vulcan 12 to a compatible smartphone or tablet, for a cost-effective dual- station solution you can take anywhere on board. Features: Easy to use multi-touch display Dedicated sailing features for cruising or racing: SailSteer, SailingTime, RacePanel, Laylines Easy to integrate – Connect Vulcan to an existing system and add basic sailing components Broadband Radar™ and ForwardScan™ ready Integrated Wi-Fi Control your B&G Pilot Instrument data display 10 Hz Gps Wireless Built-In Charts Supported Insight, Navionics (Gold, NAV+ Platinum+) , C-MAP (MAX N, MAX N+) NV Digital (Raster US Charts) Broadband 4G Radar Sharpen your view. Enjoy a new, higher standard of situational awareness with Beam Sharpening and Dual Range radar. Now with 50% more true range. Beam Sharpening The only dome radar in the world to employ beam sharpening. Now you can control the level of target separation depending upon the situation, which allows you to see the sharpest images possible when you need them most. More Range With 50% more true range than Broadband 3G Radar, you can see crystal clear targets at up to 32nm and inside strong storm cells at up to 17nm. Dual Range Capable of displaying Dual Range radar combinations. Now you can monitor targets from 200ft to 32nm with just one dome and one display. Unrivalled Short-Range Target Discrimination With twice the azimuth resolution of any other 18" radome on the market, moored vessels, docks, channel markers and other critical targets are displayed with pronounced clarity and separation. Zero Main Bang - Vision Where You Need It Most Broadband Radar technology eliminates the "main bang" - obscured viewing "dead zone" immediately around the boat - associated with pulse radar. Now you can see targets close-in for the safest navigation of harbors, estuaries and marinas. Low RF Transmission For Safe, Flexible Installation Transmitting less than 1/5,000 the power of a typical pulse radar and less than an average mobile phone, Broadband 4GT Radar can be safely mounted anywhere onboard your boat. Instant Navigation No need to wait 2-3 minutes for a magnetron to warm up. Broadband Radar technology is 100% solid-state, providing navigation in seconds with InstantOn technology. Additional Features: Crystal Clear Images Beam Sharpening Dual Range Zero Radiation Hazard InstantOn Low Power Consumption Mount Anywhere Quick Installation Unrivalled Short-Range Performance 20 MARPA Targets Manufacturer Part Number: 000-14157-001

Minimum Order: 1 bags

DPL Hair Removal Salon Use Skin Rejuvenation Beauty Machine, Application 1. Hair Removal, 2. Acne Removal, 3. Pigment Removal, 4. Vascular Removal, 5. Skin Rejuvenation Dpl Multifunction Skin Care Machine Hair Removal Salon Use Skin Rejuvenation 0 Working Technology DPL photon hair removal is a new hair removal method at present. It uses a wide spectrum of 650-950nm. It acts on the hair follicle according to the selective photothermal effect of pulsed light, increases the temperature of the hair follicle, and destroys the growth cells of the hair follicle. Do not damage the epidermis in advance, so as to achieve the effect of hair removal. Dpl Multifunction Skin Care Machine Hair Removal Salon Use Skin Rejuvenation 1 Features 1. Big spot size with stable energy output makes treatment more efficient and effective; 2. Powerful power supply guarantee the same energy output of every single pulse; 3. Standard configration of two handpieces used for fast hair removal and rejuvenation; 4. Super cooling result offers patients very good comfort during treatment; 5. From 3 to 10Hz, the energy of every single shot should be stable. In the process of continuous flashing, the system should output the same energy for each shot. Only that can guarantee a good result and safety for treatment; Dpl Multifunction Skin Care Machine Hair Removal Salon Use Skin Rejuvenation 2 Parameters item value Place of Origin China Brand Name Zohonice Model Number DPL01 DPL Yes After-sales Service Provided Online support, Video technical support Type DPL Feature Skin Tightening, Hair Removal, Acne Treatment, Wrinkle Remover, Skin Rejuvenation Application For Commercial Product name DPL Skin Rejuvenating Machine Wavelength HR: 650-950nm Input Voltage 220V/110V AC 50-60Hz Display screen 10.4 inch touch Pulse width 0.1ms-9.9ms steps 0.1ms Energy Density 150J/CM2 adjustable Cooling system Air cooling+TEC cooling+TEC constant temperature cooling Light frequency OPT : 1-10Hz DPL : 1-40Hz Gross weight 49.95kg Package size 65.5*58*127.5cm Related suggestion Dpl Multifunction Skin Care Machine Hair Removal Salon Use Skin Rejuvenation 3 Service We have 1year warranty, two year update warranty and lifetime maintence. 1) Within 1year, if there is some accessory going wrong, we will send you the accessory at once, free of charge. 2) Within 1month, if the machine is of any big fails, we will send you a new machine. 3) Within 1year, if you send backthe equipment for repair, we will be responsible for the repair, including the changes of the accessories, both of them are free of charge. 4) After 1year, we offer to repair the machine, but we quire for the cost of the changed parts, not for manual cost. 5) If the buyer has any questions from our technical department, we can supply on-line service! Dpl Multifunction Skin Care Machine Hair Removal Salon Use Skin Rejuvenation 4 Laser Hair Removal Device More Choice Dpl Multifunction Skin Care Machine Hair Removal Salon Use Skin Rejuvenation 5

Customized Sand fully automatic autoclave Building Materials Production Line AAC BLOCK MAKING MACHINE INTRODUCTION what is AAC? Sand AAC Block Production line 2013 Fly ash AAC block production line price The Autoclaved Aerated Concrete (AAC) material was developed in 1924 in Sweden. It has become one of the most used building materials in Europe and is rapidly growing in many other countries around the world. Autoclaved Aerated Concrete, also known as Aircrete, is a lightweight, load- bearing, high-insulating, durable building product, which is produced in a wide range of sizes and strengths. AAC offers incredible opportunities to increase building quality and at the same time reduce costs at the construction site. AAC is produced out of a mix of quartz sand and/or pulverised fly ash (PFA), lime, cement, gypsum/anhydrite, water and aluminium and is hardened by steam-curing in autoclaves. As a result of its excellent properties, AAC is used in many building constructions, for example in residential homes, commercial and industrial buildings, schools, hospitals, hotels and many other applications. Autoclaved aerated concrete is actually hydrated calcium silicate. The calcium is obtained from quick lime, hydrated lime and cement. The gypsum is used as a catalyst and for optimizing the properties of AAC. The silica is obtained from silica sand, fly ash (PFA), crushed silica rock and/or stone. It is possible to obtain silica as a by-product from other processes, e.g. foundry sand or burgee from glass grinding, provided the levels of alkalis or other impurities are not too high. This product is key equipment which has a widely application in building material factory to autoclaved cure different kinds of building materials. It is also used in areas of chemical, textile, wood, metallurgy, military industry. Convenient operation, security and reliable are its advantages. AAC BLOCK PRODUCTION LINE RAW MATERIAL INTODUCTION AAC block machine main material:coal ash sand waste mine material coal stonestone dust and other silicon materials. 1 Product weight is according to 600kg/m3 to control. 2 annual capacity 200,000M3. 3 set raw material proportion: cement 6.5%, raw lime 23%, flyash 68%, gypsum 3%, aluminum paste powder 350g/M3. 4 water and material rate 0.631 5 one mould product 2.88M3 6 Casting slurry cycle time 5-6 minutes, cut cycle time 5 minutes. 7 casting slurry temperature 38-42 degree 8 body quiet stop. Time is 1.5-2.5housr, temperature 50-90 degree, after quiet stop body strength is 0.15-0.18Mpa 9 Steam curing cycle time, come in and out autoclave about 0.5hour, steam curing cycle time about is 6 hours/1.6Mpa, total 6.5 hours. Customized Sand fully automatic autoclave Building Materials Production Line for wood

Essential details Place of Origin: China Brand Name: OEM / ODM Model Number: PN-008 Product name: Table Tennis Net Material: PE+Polyster Color: Custo , m Color Type: Retractable Usage: Profess , ional Table Tennis Training Packing: Carton Box Feature: Durable Logo: Customized Logo Acceptable MOQ: 500 Pieces SAMPLE TIME: 7-10 Days Supply Ability Supply Ability 30000 Piece/Pieces per Month Packaging & delivery Packaging Details carton Port Yantian Item Name Table Tennis Replacement Net Size 70" long x 5.9" height (178cm x 15cm) Packing Info. Carton Size:‎16.18 x 6.34 x 2.2 inches, G.W:‎0.15 Kilograms Materials PE Net Application Net slides on to existing posts for quick and easy installation

Eco Friendly Custom Logo Square Folding Magnetic Closure Box with Ribbon Luxury Candy Perfume Packaging Gift Box Product Description Product Name Custom Double-Sided Printing Cosmetic Packaging Box Product Meterial Square Foldable Magnetic Gift Box Use Cosmetics, Perfume, Perfume, Jewelry, Mugs Custom Service Customized Material, Size, Box & Bags Shape, Logo, Surface Printing etc. Feature 1.Eco-friendly, Recyclable and Degradable Material. 2.Free Sample & Free Design, Professional Solutions. 3.OEM for Wellknown Brands. Customized Material Selection 1.White/Brown Kraft Pape(80g-250g) 2.White Cardboard(190g-250g) 3.Coated Paper(127g-300g) 4.Rigid Cardboard 5.Specialty Paper FAQ Q1: Are You Manufacturer or Trading Company? A: We Are the 100% Manufacturer. Q2: What Should I Provide to Get a Quotations? A: 1.Product Type 2.Size & Material 3.Printing & Finishing 4.Quantity Q3: How to Ensure the Products Quality? A: We Have a Strict QC Process from Raw Materials to Finished Products,and We Also Have a Dust-free Workshop of Nearly 1000 Square Meters.

DALI K168 Phone Pressing Machine for iPhone X 11 12 13 14 Pro Max Android Mobile Phone Housing Samsung Back Cover Clamp. DALI K168 Phone Screen Pressing Machine for Phone Screen Repair Compatibility For K168 Mobile Phone Screen Pressing Platform. Features: Come with a plastic mold set to ensure safety while pressing your mobile phones. Rotatable pressing handlebar simplifies phone screen pressing. Powerful voltage and electric power help facilitate your phone screen refurbishing job efficiently. Simple structure, easy to operate, fast, convenient, and efficient lamination of the cell phone screen and back shell pressed together. According to the thickness of different cell phones, rotate the handle to different gears, and you can start the pressure work, pressure in "800 ~ 1000N" when the most ideal pressure, lamination can achieve the original waterproof effect. Compatibility For K168 Mobile Phone Screen Pressing Platform Apple iPhone: Up to iPhone 14 series Android Mobile Phone Specification: Brand: DALI Model: K168 Name: Phone Screen Pressing Machine Power Supply: DC 24V / 1.5A Power: 48W Pressure Range: 800~1000N (Ultimate pressure 1100N) Time Setting Range: 0~900S Product Size: 23*28*29cm Gross Weight: 12.3kg Precautions: The socket must be installed with a leakage protection switch while the power adapter is 220V. Before use, please connect the grounding wire to the back of the pressing platform. Make sure the power cable is properly inserted into the jack on the back of the device to prevent false connections. Do not press the display with external force in case of any damage. Remember cut off the power if the device is stored or it will be unused for an extended period of time. Do not dismantle the device and change the internal parameter settings without authorization. Package List: 1 x Screen Pressing Platform 1 x Handle Bar 1 x Power Adapter (Optional: US/EU/UK/AU) 1 x Operating Instruction Manual

Minimum Order: 1 bags

Mechanic 6 Pro Curved Screen Air Bubble Remover OCA Vacuum Lamination Phone Repair Machine Screen Refurbish, Mechanic 6 Pro LCD Screen OCA Bubble Defoaming Machine Removes Bubble for under 12.9 Inch iWatch Mobile Phone LCD Screen Repair. Features: Compatible with 12.9 inches, one button for start, vacuum laminating. It can fit a watch screen, curved screen, straight screen, and cover plate Laminating for iWatch screen, edge screen flat screen, glasses, and Pad screen, compatible under 12.9 inches. Set OCA pressure on the left, and set screen pressure on the right the laminating parameters are different in OCA and screen, one button to get started. Sealed tight for lamination tank, good laminating, no bubble. This power supply reduces the no-load voltage and low-loss power the life of capacitance is 4 times higher than ordinary conversion efficiency is up to 90% Solenoid valve adopts AirTAC brand good solenoid valve sealing responsiveness, low friction resistance. Package includes: 1 x Host 2 x Trachea 1 x Connector 1 x Power cord

Minimum Order: 1 bags

SUNSHINE S-918L Pro Multifunction 8.5-inch 360° Rotary Screen Heating Separator Build-in Vacuum Pump Kit Universal Mobile Phone Edge LCD Screen Separating Machine, SUNSHINE S-918L Pro LCD Separator Machine Powerful LCD Display Super Suction Repair Refurbishment. Features: Sunshine S-918L Pro rotary screen separator, strong suction, fast heating, compatible with a variety of mobile phone LCD screens, lighter, 8.5-inch work area, supports LCD screen separation under 8 inches. 360° Free rotating heating platform, built-in precision bearings, smooth 360° rotation. Adopt a high-quality air pump, low noise, and vibration, alumina panel heat-insulating silicone pad, effectively increasing the adsorption force, and the suction force is stronger. Visual temperature control panel, digitally controlled precise temperature adjustment, and the temperature can be adjusted from 50 to 130 °C. Rear fuse double safety protection to prevent overheating. It is more convenient to remove glue, and it can be used with a glue remover. Specification: Brand: Sunshine Product Name: Rotary Screen Separator Model: S-918L Pro Net Weight: About 1.6kg Gross Weight: About 2.1kg Product Size: 175*275*136.5mm Package Size: 300*205*170mm Working Size: 195*80mm Power Supply: AC 110V/220V Rated Power: 6A Power: 400W Heating Method: PTC Heating Sheet Temperature Control Range: 50°C~130°C Package Includes: 1 x Host 1 x Insulation Pad 1 x Power Cord

Minimum Order: 1 bags