Offers to Sell

Company Profile: Welcome to contact us and look forward to cooperating with you The main products are pharmaceutical intermediates, food additives, pigments, pharmaceutical grade, industrial grade, food grade, daily chemicals and so on. Our service: Communicate promptly and reply within 12 hours. You can send an e-mail or Whatsapp. Hot Products: CAS 14680–51–4 CAS 71368–80–4 CAS 2647–50–9 CAS 57801–95–3 CAS 40054–73–7 CAS 14030–76–3 CAS 5449–12–7 CAS 28578–16–7 Contact information: whatsapp/Telegram:+85269399572‬< , br> E-mail :lorielina87@gmail.com Welcome to contact us and look forward to cooperating with you

Minimum Order: 5 dozens

2023 Tohatsu 140 HP Four Stroke Outboard Motor Included with engine: Owner's Manual 7 Year limited warranty Propeller Service Tool Kit & Parts Specifications : Horsepower: 140hp Cylinders: 4 cyl Shaft Length: 20" Long Steering: Tiller or Remote Mechanical Starter: Electric Weight: 392 lbs Full Throttle Range: 5150-5850 rpm Displacement: 1995cc Induction System: EFI

Minimum Order: 1 bags

Included with engine: Control Remote Control Electric Start Power Tilt Propeller 3 Year's Warranty Specifications : Model: Mercury Racing 400R Power: 400hp Operating range: 6000–6600rpm Engine type: 64-degree V10 quad-cam 40-valve Displacement: 5.7L Induction: Naturally aspirated Fuel: 91RON Alternator: 150A Throttle and shift: Digital Midsection: Racing Advanced Midsection (rear tie bar bracket opt) Shaft length: 508mm (20-inch), 635mm (25-inch), 762mm (30-inch), 889mm (35-inch) Gearcase: Sport Master/5.44-inch HD Gear ratio: 1.60:1 Weight: 315kg (dry)

Minimum Order: 1 bags

Fiber Optic Heat Shrinkable Sleeves is used to protect the optical fusion fiber. The construction of the three protective and strengthening elements of the Fiber Optic Sleeve is distinctive in the function that each provides. The inner stainless steel pin keeps the sleeve rigid and stable. The pin is vibratory tumbled with a special medium. This eliminates the possibility of fiber scarring or material penetration, both of which could damage the sensitive glass fibers. The inner tube is made of a specially designed material that compresses. The fiber splice becomes encapsulated within the inner tube. The outer tube is made of a heat-shrinking polyolefin. This encloses the inner tube and the encapsulated fiber splice, providing double protection and ensuring that moisture and air are eliminated from the fiber splice. 0.5mm Steel Rod 30mm Length Micro Fiber Optic Heat Shrinkable Sleeves is designed for 250μm bare fiber splicing protection. Length is 30mm only, it is special used in smaller application, such as CWDM, DWDM ect. 0.5mm Steel Rod 30mm Length Micro Fiber Optic Heat Shrinkable Sleeves is commonly known as an optical fiber heat shrink protect sleeve. 0.5mm Steel Rod 30mm Length Micro Fiber Optic Heat Shrinkable Sleeves is widely used in communication optical fiber splicing projects, it is consisted of a special cross-linked polyolefin, a hot melt tube and a strengthen member. Chengdu Focus Infra Materials Company offers a number of high quality splicing sleeve options.Micro series lengths include 15mm, 20mm 25mm, 30mm 35mm and 40mm. Sleeves come standard with a clear tube for viewing the color of the fiber itself. It is specially designed to improve the mechanical strength of the optical fiber welding point and ensure the reliability of the splicing; does not affect the optical transmission characteristics of the optical fiber; The use method is simple and safe, reducing the risk of adverse effects on optical fiber during use; The transparent sleeve can monitor the optical fiber splicing at any time; The inside is completely sealed, so that the welding point has good high temperature and high humidity resistance.

Minimum Order: 1000

Fiber Optic Splice Sleeve was developed to protect and strengthen fusion splices on fiber optic cables. The Fiber Optic Splice Sleeve intends to protect (mechanically) fiber optic splices. The Fiber Optic Splice Sleeve is built from shrinkable plastic tube with metal cylinder inside. The fibers are inserted before splicing into the plastic tube. After making the splice, the shrinkable tube is heated and shrunk on the splice. It can protect the spliced fiber from being break down and unwanted bending and is coated with the plastic tube. It gives to the installer flexibility while using the spliced fibers during installation. The Fiber Optic Splice Sleeve is fitted to the sleeve holders that are generally exist in fiber optic trays.

Minimum Order: 5000

Fiber Optic Splice Sleeve was developed to protect and strengthen fusion splices on fiber optic cables. The Fiber Optic Splice Sleeve intends to protect (mechanically) fiber optic splices. The Fiber Optic Splice Sleeve is built from shrinkable plastic tube with metal cylinder inside. The fibers are inserted before splicing into the plastic tube. After making the splice, the shrinkable tube is heated and shrunk on the splice. It can protect the spliced fiber from being break down and unwanted bending and is coated with the plastic tube. It gives to the installer flexibility while using the spliced fibers during installation. The Fiber Optic Splice Sleeve is fitted to the sleeve holders that are generally exist in fiber optic trays. Product advantages: 1. Specially designed by the cross-linked polyolefin, hot melt tube and enhanced stainless steel wire optical fiber splice protection devices, does not affect the fiber optic light guide features. 2. Bare fiber hot melt, stainless steel needle, protect fiber 3. Industrial sealing treatment at both ends of the tube to keep the steel needle from falling out 4. Selected 304 high-quality stainless steel, not easy to rust, corrosion- resistant, and anti-aging 5. The double-layer shell is made of environmentally friendly PE and has a long service life 6. Better protection of bare fiber and prolong the service life of fiber

Minimum Order: 5000

Drop Cable Protect Fiber Heat Shrink Sleeves is a special polyolefin thermal-shrinkable sleeve, also called EVA. The outer layer is made of high quality soft crosslinked polyolefin material and inner hot-melt adhesive. The outer layer has the characteristics of insulation, corrosion prevention and wear resistance, while the inner layer has the advantages of low melting point, waterproof seal and high adhesion. Drop Cable Protect Fiber Heat Shrink Sleeves can Moisture resistant for environmental protection Clear sleeve make it easy to detect splice before shrinkage Easily use and avoid any damages to the optical fiber during installation Color optical fiber splice protector is very convenience for installation. The Drop Cable Protect Fiber Heat Shrink Sleeves is widely used in FTTH Drop cable joint connection protective. With big Inner Diameter of inner tube, we can put drop cable easily. communication optical fiber equipment such as optical fiber splice box, optical fiber terminal box, optical fiber distribution box, optical fiber transfer box, etc., when using Drop Cable Protect Fiber Heat Shrink Sleeves, it can not only protect the splice point but also increase the optical fiber machinery the strength reduces the damage of the optical fiber during the installation process without affecting the light guide characteristics of the optical fiber. If it is a transparent Drop Cable Protect Fiber Heat Shrink Sleeves, the splicing situation of the optical fiber can be seen clearly at a glance when the optical fiber is connected.

Minimum Order: 1000

Description: Drop Cable Protect Fiber Heat Shrink Sleeves is a special polyolefin thermal-shrinkable sleeve, also called EVA. The outer layer is made of high quality soft crosslinked polyolefin material and inner hot-melt adhesive. The outer layer has the characteristics of insulation, corrosion prevention and wear resistance, while the inner layer has the advantages of low melting point, waterproof seal and high adhesion. Drop Cable Protect Fiber Heat Shrink Sleeves can Moisture resistant for environmental protection Clear sleeve make it easy to detect splice before shrinkage Easily use and avoid any damages to the optical fiber during installation Color optical fiber splice protector is very convenience for installation. The Drop Cable Protect Fiber Heat Shrink Sleeves is widely used in FTTH Drop cable joint connection protective. With big Inner Diameter of inner tube, we can put drop cable easily. communication optical fiber equipment such as optical fiber splice box, optical fiber terminal box, optical fiber distribution box, optical fiber transfer box, etc., when using Drop Cable Protect Fiber Heat Shrink Sleeves, it can not only protect the splice point but also increase the optical fiber machinery the strength reduces the damage of the optical fiber during the installation process without affecting the light guide characteristics of the optical fiber. If it is a transparent Drop Cable Protect Fiber Heat Shrink Sleeves, the splicing situation of the optical fiber can be seen clearly at a glance when the optical fiber is connected.

Minimum Order: 1000

Description: Ribbon Fiber Fiber Optic Protection Sleeve is designed for Ribbon fiber, normally it's 4 cores, 6 cores, 8 cores and 12 cores fiber optic protection sleeve for flat fiber cable. Ribbon Fiber Fiber Optic Protection Sleeve is applied to the optical fiber closure to fix and protect the optical fiber when splicing. The sleeves can be divided into two types (single sleeve and ribbon sleeve) according to the function. The single type is used for the single-fiber, and the mass type is used for the ribbon fiber. It is different in the reinforcement between two types. The single one realizes the reinforcement by the stainless steel needles, the later one via the ceramic reinforcement member to realize the function. Ribbon sleeve means there are several cores for the fiber. So the mass sleeve includes 4cores, 6cores, 8cores, 12 cores (for types). This product is constructed with an inner EVA meltable adhesive tube, a polyolefin heat shrink outer tube and either single or dual strength members. Our single strength member sleeve which has become an industry standard, has an after shrink diameter of 4.9 X 4.4 mm, and utilizes a special glass member.

Minimum Order: 2000

Chengdu Focus Infra Materials Company manufacturing all kinds of Shrinkable Fiber Optic Sleeve is applied to the optical fiber closure to fix and protect the optical fiber when splicing. Chengdu Focus Infra Materials company offers various type of fiber optic heat shrinkable sleeves for FTTH, FTTX, FTTP Network Project. The sleeve can be divided into two types(single and mass) according to the function. The single type is used for the single- fiber, and the mass type is used for the ribbon fiber. It is different in the reinforcement between two types. The single one realizes the reinforcement by the stainless steel needles, the later one via the ceramic reinforcement member to realize the function.Mass means there are several cores for the fiber. So the mass sleeve includes 4cores,6cores,8cores,12cores(for types).

Minimum Order: 5000

Description: 12F Single Ceramic Heat Shrink Protective Ribbon Fiber Splice Sleeve is designed forFlat fiber, normally it's 4 cores, 6 cores, 8 cores and 12 cores for choose. 12F Single Ceramic Heat Shrink Protective Ribbon Fiber Splice Sleeve is applied to the optical fiber closure to fix and protect the optical fiber when splicing. 12F Single Ceramic Heat Shrink Protective Ribbon Fiber Splice Sleeve can be divided into two types (single rod and ribbon rods) according to the function. 12F Single Ceramic Heat Shrink Protective Ribbon Fiber Splice Sleeve is constructed with an inner EVA meltable adhesive tube, a polyolefin heat shrink outer tube and either single or dual strength members. Our single strength member sleeve which has become an industry standard, has an after shrink diameter of 4.9 X 4.4 mm, and utilizes a special glass member. Feature: 1. Single holed (preshrunk)ends eliminates improper fiber threading 2. Smooth, deburred stainless steel reinforcing member ends decrease the risk of fiber damage during installation. 3. Extended liner length prevents contact between the fiber and ther backbone 4. Clear sleeve design persign permits easy centering of splice before heating 5. Sealing structure makes the splice free from effect of temperature and humidity from environment 6. Protecting splicing point 7. Improve mechanical strength 8. Simple operation, reducing the risk of fiber damage during installation. 9. Does not affect the optical characteristics of the optical fiber. 10. Sealing structure to have good resistance of temperature and humidity performance Applications: 1.Fusion splicing 2.Fiber cable protecting 3.FTTH system 4.Rack-mount & Wall-mount terminal box 5. Fiber Opitc Splice Closure 6. optical fiber switch box and so on continue protection

Minimum Order: 1000

PRODUCT DESCRIPTION Radar Level Meter For Corrosive Liquid 80Ghz With 30m Detecting Distance Product Description: DTS-RD-82-C Radar level measuring instrument is capable of accurately measuring the maximum distance up to 30 meters. The maximum measurement accuracy of the radar level measuring instrument is extremely high, yet the device is simple to use which makes it beneficial to many industrial manufacturers. High resolution achievable with the radar measurements helps reduce errors in measurement and also reduce manual inspection time. With its advanced technology and user-friendly functions, the radar level measuring instrument has become an ideal tool for industrial applications. Features: The size of the antenna is small, which makes it easy to install. This non- contact radar will not cause any wear or pollution. It is almost immune to corrosion and foam and it is almost unaffected by the changes in the water vapour, temperature and pressure in the atmosphere. The beam angle is also small, concentrating the energy and thus enhancing its echo ability. As a result, it is more likely to avoid other interference objects. Applications: The 80G Radar Level Meter is an advanced microwave level sensor that has a measuring range of 0.15~30m and is equipped with a microwave level sensor. It uses a unique 80GHz measuring frequency and radar measuring principle to precisely measure the level of various liquids and solids in tanks or other containers. It is suitable for a wide range of applications such as monitoring water levels in reservoirs and rivers, measuring the height of oil in tanks, and detecting the level of materials in silos. This level meter is an ideal choice for industrial operations that require accurate and reliable measuring of liquid and solid levels. Technical Parameters: Parameter Value Protection Grade IP67 Measuring Principle Radar Product Name 80GHz Radar Level Meter Measuring Range 0.15~30m Data Storage Yes Application Corrosive liquid Resolution 1mm Measuring Frequency 80GHz Display LCD Accuracy ±2mm Signal output 4…20mA/HART Digital output RS485/MODBUS Process temperature -40~+120℃ Packing and Shipping: Packaging and Shipping of 80G Radar Level Meter The 80G Radar Level Meter is packaged in a sturdy cardboard box with the following dimensions: Length: 40 cm Width: 30 cm Height: 30 cm The 80G Radar Level Meter is shipped with all the necessary components and accessories, as well as a user manual. The package is shipped by air freight, usually with a carrier such as DHL or FedEx.

PRODUCT DESCRIPTION Automated Agricultural 100% Light Deprivation Greenhouse With Blackout System Features Stable Structure Easily Assembled Product Name Blackout Greenhouse Application Application Usage Vegetables Growing Covering Film/PC Sheet/Glass Frame Material Hot Galvanized Steel Pipes Shading System Inside+outside Shading Accessories PVC Vertical Hydroponics NFT System Product Blackout Greenhouse Covering Material Film Advantage 1.the light transmittance is extremely high 2.the heat preservation effect is good 3.the structure strength is high 4.the service life is long Span Width 9.6 meters(3.2*3 steeple), 10.8 meters (3.6 steeple), 12 meters (4 *3 steeple) Length Lesss than 70m Column Span 4m Height 4m-7m Wind Load 0.5KNm2 Pipe Line Hot dip galvanized steel pipe Agricultural 100% Automated Light Deprivation Greenhouse With Blackout System 0Agricultural 100% Automated Light Deprivation Greenhouse With Blackout System 1Agricultural 100% Automated Light Deprivation Greenhouse With Blackout System 2Agricultural 100% Automated Light Deprivation Greenhouse With Blackout System 3Agricultural 100% Automated Light Deprivation Greenhouse With Blackout System 4Agricultural 100% Automated Light Deprivation Greenhouse With Blackout System 5Agricultural 100% Automated Light Deprivation Greenhouse With Blackout System 6Agricultural 100% Automated Light Deprivation Greenhouse With Blackout System 7Agricultural 100% Automated Light Deprivation Greenhouse With Blackout System 8Agricultural 100% Automated Light Deprivation Greenhouse With Blackout System 9Agricultural 100% Automated Light Deprivation Greenhouse With Blackout System 10Agricultural 100% Automated Light Deprivation Greenhouse With Blackout System 11Agricultural 100% Automated Light Deprivation Greenhouse With Blackout System 12 CHOYUEH is an enterprise specializing in greenhouse technology development, engineering design, production and processing, product sales, installation and construction, and consulting services. It has modern production equipment, professional production technology and first-class production plants, as well as high-quality design, R&D, production and construction personnel. The company has solid R&D strength, advanced design concepts, strong engineering and technical strength, rich construction experience and perfect after-sales service. It designs and constructs vegetable greenhouses, seedling and flower greenhouses, nursery greenhouses, breeding greenhouses, greenhouse factories, ecological restaurants, etc. Has rich experience. The company's main business includes: Venlo-type glass greenhouses, logistics seedbeds, single-span film greenhouses, multi-span film greenhouses, multi-span solar panel greenhouses, and solar greenhouses. The company provides facilities and equipment including heating facilities and cooling equipment, internal/external shading equipment, fixed/mobile sprinkler irrigation systems, mobile seedbeds, flower facilities, water and fertilizer integration and other facilities.

PRODUCT DESCRIPTION OTN/DWDM 19" 5U 100G 200G Optical Transmission Network Solutions for Telecom/Datacenter/5G/Long Haul Network OSP3800 series is a compact, high-capacity, low-cost OTN optical transmission system introduced by Iseelink. It adopts a CWDM / DWDM common platform design, supports multi-service transparent transmission, and has flexible networking and access capabilities. Applicable to the national backbone network, provincial backbone network, metro backbone network, and other core networks, to meet the needs of large-capacity nodes above 1.6T, is the industry‘s most cost-effective transmission application platform. Build a large-capacity WDM transmission expansion solution for IDC and ISP operators. Product Features ● Standard 5U, 19", 20 slots ● Dual power supply AC/DC optional ● Multiple service card hybrid insertion ● Support 10G/100G/200G hybrid transmission Product Applications Telecom Datacenter 5G Network Long Haul Network Product Specification Function Note Product model OSP3800-1 OSP3800-2 OSP3800-4 OSP3800-5 Equipment 1U: (back-power supply) 2U: (back-power supply) 4U: (back-power supply) 5U: (back-power supply) Service slot 4 slots 8 slots 16 slots 20 slots Power consumption 120W (Max) 300 W (Max) 600 W (Max) 750W (Max) Max channel number CWDM: 18 wavelengths, DWDM: 96 wavelengths (50GHz) Single channel max rate 200Gbit/s Line side rate 1.25Gbit/s, 2.5Gbit/s, 8Gbit/s, 10Gbit/s, 16Gbit/s, 25Gbit/s, 40Gbit/s, 200Gbit/s Support service STM-1/4/16/64/256,OC-3/12/48/192/768 OT , U-1/2/3/4 FE/GE/10GE/25GE/40GE/100GE FC 1G/2G/4G/8G/16G/32G Clock features Support IEEE 1588V2 Network topology Point-to-point, chain type, star type, ring type Network level protection Optical channel 1+1 protection, optical multiplex 1+1 protection, optical line 1+1 protection Equipment level protection Power supply backup Network management SNMP, Web, CLI, Telnet Installation "19" and 23" cabinets, ETSI 300mm/600mm cabinets Wireless outdoor base station cabinet, FTTX outdoor cabinet, hanging wall Working temperature range -10℃～60℃ Working humidity range 5~95% no condensation Storage temperature range -40℃～85℃ Heat dissipation Fan cooling Power supply mode AC: 90 ~ 260V or DC: -36 ~ -72 V OSP3800 series includes the following cards NMS management card 100G QSFP28 to CFP transponder 2xQSFP28 to CFP2 200G Muxponder 100G Muxponder: QSFP28 ↔ 4xSFP28 40G&100G OEO: 6*QSFP28 SFP28 25G Quad transponder SFP+ Multi-Rate Quad transponder Redundant Multi-Rate Dual transponder EDFA Optical Amplifiers Bidi EDFA Optical Amplifiers 16ch DWDM MUX/DEMUX 40ch DWDM MUX/DEMUX(AAWG) OLP Optical Line Protector DWDM Passive Optical Add/Drop Multiplexers DCM card Schematic Diagram 100G WDM OTN Device Optical Transmission Network Solutions 0