Offers to Sell

Original Mimaki JFX500-2131 GEN5 UV Printhead - M022626 Ricoh Gen5 Printhead Mimaki G5 J36008 M022626 for mimaki SWJ-320 YG500 TX500 TS500 UJV500 JFX500 JV400-SUV JV400-LX This printhead GEN5 (MH5420/5440) is suitable for Mimaki JFX500-2131 & UJV500-160 printers. It has two and four colour support, 8 levels of grayscale and up to 600 npi nozzle density. This is the original Mimaki part (number M022626 replacing M013497 and M015068). Product Specifications Dimensions: 89 x 25 x 69 mm (excluding cables) Head materials: SST, Nickel alloy and Epoxy Adhesive Nozzle plate surface: Coated SST Number of nozzles: 4 x 320 nozzles Nozzle spacing: 0.1693 mm Nozzle density: up to 600 npi Piezo yype: D33 Stacked PZT Temperature control: Integrated Heater and Thermistor Operator temperature range: Up to 80° C Native drop volume: 7 pl Drop volume range: 7 - 35 pl Drop velocity: 7 m/s Jetting frequency: Up to 60 kHZ Life: 100 billion actuations per nozzle Printer compatibility Mimaki JFX500-2131 Mimaki UJV500-160

Minimum Order: 1 bags

Konica Minolta KM1024i SHE Printhead Brand New Konica KM1024i SHE 6PL Printhead The Konica Minolta KM1024i SHE printhead is a robust, shear mode, piezo on-demand printhead featuring an All-nozzle Independent Drive System with a Multi-line Structure. In contrast with the existing 3-cycle system drive, an independent drive system that enables simultaneous emission from all 1024 nozzles has been adopted. The high-density structure featuring 4 lines of 256 nozzles aligned with high precision enhances positioning accuracy to realize high-definition print quality. The Konica Minolta KM1024i SHE printhead offers a Maximum Drive Frequency of 60kHz, approximately 3 Times greater than that of the KM1024 Series, which makes it the ideal inkjet printhead for development of single-pass system inkjet printers capable of high-speed printing. Environmentally-considerate Approved Green Product The Konica Minolta KM1024i SHE printhead incorporates only approximately one-third of the petroleum-derived materials and toxic chemicals used in the current KM1024 Series. In addition, the nozzle unit surface area is the same as that of the KM1024 Series. Specifications • Technology: Piezo Drop On-Demand • Native Resolution: 360 dpi • Cal. Droplet Size: 6 pl • Max. Drops in Greyscale: 8 drops • Tot. Amount of Nozzles: 1024 (256 nozzles per line) • Print Width: 72 mm • Typical Firing Frequency: 50 Khz • Max Firing Frequency: 60 kHz • Ink Compatibility: UV Inks • Heater: integrated • Dimensions: W131mm x D18mm x H94mm • Weight: Approx. 150g Printer compatibility Allwin S320UV Allwin S500UV Allwin UVT 2030 Allwin UVT 2512 Allwin UVT+ 2030 Allwin UVT+ 2512 Docan H1000 Flora HJ 5000UV Human Digital Technology M-JET IIJ ColourPrint-72 JHF Vista R3300 JHF Vista R6000 JHF Vista V300UV JHF Vista V500UV Optimum Digital KR Hybrid UV Skyjet FT2512i Skyjet FT3020i Taimes T50UV Yicong YD2512-KD

Minimum Order: 1 bags

KM1024i printhead 30pl km1024i LHE for DIGITAL printing machine new original konica 1024i printhead LHE-30 30pl Konica Minolta km1024i Print Head Konica Minolta KM1024i LHE 30PL Printhead Brand New The Konica Minolta KM1024i LHE printhead is a robust, shear mode, piezo on-demand printhead featuring an All-nozzle Independent Drive System with a Multi-line Structure. In contrast with the existing 3-cycle system drive, an independent drive system that enables simultaneous emission from all 1024 nozzles has been adopted. The high-density structure featuring 4 lines of 256 nozzles aligned with high precision enhances positioning accuracy to realize high-definition print quality. The Konica Minolta KM1024i LHE printhead offers a Maximum Drive Frequency of 27kHz, which makes it the ideal inkjet printhead for development of single-pass system inkjet printers capable of high-speed printing. This printhead is Agfa part number D2+755020600105. Environmentally-considerat , e Approved Green Product The Konica Minolta KM1024i LHE printhead incorporates only approximately one-third of the petroleum-derived materials and toxic chemicals used in the current KM1024 Series. In addition, the nozzle unit surface area is the same as that of the KM1024 Series. Specifications • Technology: Piezo Drop On-Demand • Native Resolution: 360 dpi • Cal. Droplet Size: 30 pico litre • Max. Drops in Greyscale: 8 drops • Tot. Amount of Nozzles: 1024 (256 nozzles per line) • Print Width: 72 mm • Firing Frequency: 27 kHz • Drive Voltage: 13+-3V • Ink Compatibility: UV (White) • Heater: integrated • Dimensions: W131mm x D17mm x H94mm • Weight: Approx. 150g Printer compatibility Agfa Anapurna 100 Agfa Anapurna H2500i LED Agfa Anapurna M2050i Agfa Anapurna M2500i Agfa Anapurna M2540 FB Agfa Anapurna M3200i Allwin S320UV Allwin S500UV Allwin UVT 2030 Allwin UVT 2512 Allwin UVT+ 2030 Allwin UVT+ 2512 Docan H1000 Flora HJ 5000UV Human Digital Technology M-JET IIJ ColourPrint-72 JHF Vista R3300 JHF Vista R6000 JHF Vista V300UV JHF Vista V500UV Optimum Digital KR Hybrid UV Skyjet FT2512i Skyjet FT3020i Taimes T50UV Yicong YD2512-KD

Minimum Order: 1 bags

Spectra SE-128 AA Factory Price The Spectra SE-128 AA is a high performance, robust and reliable jetting assembly designed for a broad range of wide format printers at resolutions up to 900 dpi. Two electrically independent piezoelectric slices, each with 64 addressable channels, are combined to provide a total of 128 nozzles. It has been calibrated for a droplet size of 30 pico litre and has a maximum firing frequency of 40 kHz. This jetting assembly contains serial-to-parallel converters for selecting which jets to fire; all jets can be fired simultaneously or individually. These Spectra SE-128 AA heads are manufactured in the US and passed Dimatix Spectra US quality control tests to ensure the best durability. It carries a manufacturer product warranty. Specifications - Technology: Piezo Electric - Max. Resolution: 900 dpi - Cal. Droplet Size: 30 pico litre - Adj. Range for Droplet Size: 25-30 pico litre - Tot. Amount of Nozzles: 128 - Nozzle Spacing: 508 microns - Nozzle Diameter: 35 microns - Firing Frequency: 40 kHz - Operating Temperature: up to 90°C - Ink Compatibility: Solvent and UV Inks Note: Gandinnovations / AGFA: Jeti printers use SE-128, SL-128 or SM-128 print heads depending on the original printer configuration. Please contact us for more information. Printer compatibility Agfa Jeti 1224 UV HDC FTR Agfa Jeti 2030 X-2 UV Flatbed Agfa Jeti 3150 X-2 UV Flatbed Agfa Jeti 3312 Solvent RTR Agfa Jeti 3324 AquaJet RTR Agfa Jeti 3324 Solvent RTR Agfa Jeti 3324 UV RTR Agfa Jeti 3348 Solvent HSS RTR Agfa Jeti 3348 UV Galaxy RTR Agfa Jeti 3348 UV Jetspeed RTR Agfa Jeti 5024 Solvent RTR Agfa Jeti 5024 UV JetSpeed RTR Agfa Jeti 5048 UV XL JetSpeed Dilli Neo UV-LED GlassTech Durst Rho 320R Durst Rhopac 160 Graphics One Fuzion UV Inca Columbia Turbo Inca Onset S20 Inca Onset S70 Inca Spyder 320 Inca Spyder 320Q Inca Spyder V Luscher JetPrint 3530 UV Spühl Virtu RS 25 Spühl Virtu RS 35 Spühl Virtu RS 36 Spühl Virtu RS 50

Minimum Order: 1 bags

Spectra Galaxy JA 256/50 AAA The Spectra Galaxy JA 256/50 AAA is a high performance, robust and reliable jetting assembly designed for a broad range of wide format printers at resolutions up to 600 dpi. Specifications - Technology: Piezo Electric - Max. Resolution: 600 dpi - Cal. Droplet Size: 50 pico litre - Adj. Range for Droplet Size: 45-55 pico litre - Tot. Amount of Nozzles: 256 - Nozzle Spacing: 254 microns - Nozzle Diameter: 36 microns - Firing Frequency: 20 kHz - Operating Temperature: up to 90°C - Ink Compatibility: Solvent, water-based and UV Inks Printer compatibility Aestrik Inwear L3508G Buskro BK1700 Dilli Neo Venus UVV-2506GW Dupont Cromaprint 22UV Keundo SupraQ 3300 UV PrismaJet P22 Teckwin TeckUV S2400 Teckwin TeckUV S3000 VUTEk PressVu UV 200/600 VUTEk PressVu UV 320/400

Minimum Order: 1 bags

The Sapphire QS-256/10 AAA printhead features 256 independent channels, arranged in a single row of nozzles at 100 dots-per-inch spacing. It is designed to eject adjustable 10 to 30 picoliter drops in binary jetting mode or a 10-picoliter fundamental drop in grayscale mode. This is done at a nominal 8-meter per second drop velocity when jetting fluids in the 10 to 14 centipoise range. Dimatix’ breakthrough VersaDrop™ jetting technology is featured within the Sapphire QS-256/10 AAA printhead. It allows unparalleled flexible modes of operation including adjustable binary drop size and grayscale capability at unprecedented throughput rates. The rugged, field proven material set selected for the Sapphire QS-256/10 AAA printhead deliver long service life and consistent output. Using tailored waveforms and a durable, inert silicon nozzle plate to provide best-in-class drop placement accuracy, a wide range of ink formulations are accommodated including UV-curable, organic solvent and aqueous-based inks and associated maintenance fluids. Precision registration points have been added to the printhead to provide absolute reference to the nozzles to within a few microns. This makes it possible to nest printheads together for high packing densities. Shared physical features and identical interfaces as other Q-Class products allow the Sapphire QS-256/10 AAA to be intermingled with the same or complementary printhead models to create a multitude of single and multiple-color configurations. Each 256-channel Sapphire printhead is offered with an integral temperature sensor and a configurable, dual-ported fluid interface comprised of O-ring face mounts or barbed fittings to facilitate fast flushing or recirculation of inks. Printhead operational temperature can be up to 90° C. The driver chip is double buffered to support the Sapphire QS-256/10 AAA high-speed jetting capability Specifications - Technology: VersaDrop™ jetting - Print Width: 64.77mm (2.55") - Nominal Drop Size: 10 picoliter - Adj. Range for Droplet Size: 10 to 30 picoliter - Tot. Amount of Nozzles: 256 - Nozzle Spacing: 254 microns - Firing Frequency: 50 kHz (16 kHz for 30 picoliter droplets) - Operating Temperature: up to 90°C - Ink Compatibility: UV curable, Organic solvents, and aqueous inks Printer compatibility Durst Rho P10 160 Durst Rho 1012 Durst Rho 500R Durst Rho 750 HS Durst Rho 750 Presto Durst Rho P10 200 Durst Rho P10 250 Durst Rho P10 320R Fujifilm DMP-3000 Fujifilm DMP-5000 Inktec Jetrix 2513FRQ Inktec Jetrix 3015FQ Inktec Jetrix 2513FQ Polytype VIRTU Quantum 25 Polytype VIRTU Quantum 35 WP Digital RS25 WP Digital RS35

Minimum Order: 1 bags

Polyaluminium Chloride (PAC) PAC Solid professional polyaluminium chloride manufacturer for drinking water treatment Cas No.: 1327-41-9 Molecular formula: [Al2(OH)nCL6-n]m  Appearance: Light Yellow Granule or Powder ITEMS PRODUCT GRADE Potable Water Grade Industrial Grade Content %≥ 28-32% 25-28% Basicity % 40-90 40-90 PH 3.5-5.0 3.5-5.0 Water insoluble matter%≤ 1.0 1.0 Product Description: Poly Aluminium Chloride is an inorganic high- molecular polymer with gelling property. It could be used as cementing material in fireproofing material, Ultrapure alumina products, refractory concrete etc. Application:Poly Aluminium Chloride is an flocculant mainly used in the purifying of drinking water. It is also used in the special water treatment, such as removal of iron, cadmium, fluorine, radioactive pollutant, oil slick etc. It could also be used in industrial waste water treatment, such as the waste water treatment of dying industry. It is also widely used in the foundry industry, paper making industry, pharmaceutical industry, leather industry etc.

Aluminum Chloride Aluminum Chloride Anhydrous Aluminium trichloride,AlCl3 Cas No.: 7446-70-0 Molecular formula: AlCl3  Appearance: Light Yellow Granule or Powder ITEMS PREMIUM GRADE FIRST GRADE Content w/%≥ 99.0 98.5 Fe   w/ %≤ 0.04 0.08 Water insolubel w/%≤ 0.05 0.30 Heavy Metal  w/%≤ 0.006 0.04 Free aluminum w/%≤ 0.010 —— Product Description: White or light yellow granule or powder, relative density  2.44(25℃),  Melting Point 190℃(253KPa),incombustible, easily soluble in water, soluble in ethyl alcohol, chloroform, carbon tetrachloride. Slightly soluble  in  Benzene.  Strong water absorbing ability. Extremely easy to deliquesce. When exposing to the air, it could easily absorb  the water and is hydrolyzed to hydrogen chloride. Strong causticity. Form complex compound with many inorganic or organic compound. And the formed products are all easy to decompose.

2-Ethyl-anthraquinone 2-EAQ 2-Ethyl Anthraquinone CAS NO.: 84-51-5 Appearance: Light Yellow flake solid Product Description: Light yellow flake solid,melting point is lower than Anthraquinone, soluble in Benzene, melting point is 108℃ RAW MATERIAL FOR HYDROGEN PEROXIDE   ITEMS PREMIUM GRADE FIRST GRADE Appearance Light Yellow flake solid Content w/%≥ 99.0 98.5 Melting point℃ 108.0-112.0 108.0-112.0 Benzene insolubles%≤ 0.05 0.10 Moisture %≤ 0.2 0.2 CL ≤ppm 10 40 S ≤ ppm 5 5 Fe ≤ ppm 5 10

Quick Details Place of Origin: Viet Nam Brand Name: VIET DELTA Model Number: Porter frozen clam meat 2 Drying Process: AD Variety: Frozen clam meat Weight (kg): 1KG/PP bag and 10kg/carton Freezing Process: IQF Part: Without Shell Style: FROZEN Packaging: Bag Certification: ISO, HACCP Shelf Life: 1 year Type: SHELLFISH, white, brown, clam frozen Distribution: frozen clam Wholesales Origin: Vietnam Supply Ability Supply Ability: 20 Ton/Tons per Month Packaging & Delivery Packaging Details: Depends on customers Port: Ho Chi Minh port HEAD OFFICE VIET DELTA CORP Address: 20/5 Dinh Bo Linh St., Ward 24, Binh Thanh Dist, Ho Chi Minh City, Vietnam Telephone: (84.28) 3511 6807 Fax: (84.28) 3511 9559 E-mail: info@vdelta.com.vn Website: Vdelta.com.vn

Minimum Order: 10 long tons

Steel structure is made from organized combination of structural steel members designed to carry loads and provide adequate rigidity. The members of the steel structures are made of steel and are joined by welding, riveting or bolting. These structures are reliable and require less material than other types of structures due to the high strengh of steel which are distinguished by the diversity of their shapes and their architectural expressiveness. "Shijiazhuang Sanhe Steel Structure Co.,Ltd" is professional manufacturer who's devoted to steel structure construction. We provide the whole set of services include making construction designs, producing products and installation. Our Factory covers an area of 60,000 square meters. We have 200 workers, including 50 high quality engineering technical personnel. We shear up to 8000 tons of steel sheet and also produce up to 20,000 tons of tapered H-section each month. Our total annual output for Corrugated steel sheet,Sandwich panel, Floor decking sheet, C&Z purlin is about 7000tons. We are now becoming one of the largest manufacturers in Hebei province. In the past years, we are proud that every customer is satisfied with our product and service; For the future,we will continuously improve our quality and service to adapt to the changing needs of our customers and the environment. We always stick to the tenet that "quality first, customer first". When you choose us, you will have peace of mind for many years to come.

Minimum Order: 200

The cable tie with identification tags, also known as zip tie tags, are made of UL-approved nylon 66, with a fire rating of 94V-2, acid and corrosion resistance. The front end of the zip tie cable label has a blank label design, which can be marked with an oil-based pen or printed. Zip Tie Tags Specifications Zip Tie Tags Parameters and Drawing SAICHUANG is a reliable stainless steel cable ties suppliers, we provide emc cable gland, id tag cable ties, plastic zip tie labels, cable tie label tags, zip tie cable labels, plastic zip tags, tag zip ties, zip tie identification tags, plastic zip tie tags and etc. Want to know more? contact us now.

Minimum Order: 1000

These stainless steel wire cable ties with different prices are ideal for use in harsh, corrosive, and salt-water environments, chemical and radiation exposure, food processing and for vibrating equipment. They feature an industry standard Type 304- Lock ball style. Stailess Steel Zip Ties Specifications Stailess Steel Zip Ties Parameters and Drawing SAICHUANG is a reliable stainless steel cable ties suppliers, we provide cable tie holder, ss tie wraps, self locking stainless steel cable ties, ss zip ties, ss ties and etc. Want to know stainless steel cable ties price or more? contact us now.

Minimum Order: 1000

These adhesive backed cable tie mounts are perfect for any application. Adhesive wire tie mount can securely install wires without damaging the installation surface. Adhesive Cable Tie Holder Specifications Sticky Cable Tie Holder Parameters and Drawing SAICHUANG is a reliable cable tie supplier, we provide self adhesive tie wrap anchors, 4 way cable tie mount, adhesive backed mounting base, adhesive cable tie clips, cable tie adhesive pads and etc. Want to know more? contact us now.

Minimum Order: 1000