Offers to Sell

Name: KL-98081 Champ pH Tester Product description : Measuring range 0.00~14.00PH Accuracy

Minimum Order: 10 long tons

Name: KL-98102 Economical pH Tester Product description : Measuring range 0.00-14.00PH Resolution 0.01PH Accuracy ±0.1pH(@20℃) ±0.2PH Operatin , g Temperature 0℃~50℃ Automatic Temperature Compensation 0℃~50℃ Power Supply 3×1.5V(AG13) Dimensions 97mm×29mm×36mm Weight 50g

Minimum Order: 10 long tons

Name: KL-98105 pH Tester Product description : Measuring range 0.00-14.00PH Resolution 0.01PH Accuracy ±0.1pH(@20℃) , ±0.2PH Power Supply 3×1.5V(AG13) Operating Temperature 0℃～50℃ Dimensions< , br> 175mm×51mm×25mm Weight 57g

Minimum Order: 10 long tons

Name: KL-98103 Economical pH Tester Product description : Measuring range 0.00-14.00PH Resolution 0.01PH Accuracy ±0.1pH(@20℃) , ±0.2PH Power Supply 3×1.5V(AG13) Operating Temperature 0℃～50℃ Dimensions< , br> 175mm×51mm×25mm Weight 57g< , br>

Minimum Order: 10 long tons

Name: KL-0101 Folding Three In One pH Tester Product description : Measuring range PH 0.00～14.00PH ℃ -5～50℃ RH 10%～99%RH < , br>Resolution PH 0.01PH ℃ 0.1℃ RH 1%RH Accuracy , PH ±0.1PH ℃ ±1℃ , RH ±5%RH Automatic Temperature Compensation 0℃～50℃ Power Supply 4×1.5V(AG13) Operating Temperature 0℃～50℃ Calibration , Manual 1 point Dimensions 156mm×55mm×23mm Weight 95g

Minimum Order: 10 long tons

Name: KL-097 Waterproof pH/Temperature Meter Product description : Measuring range pH 0.00~14.00PH Temp 0℃~55℃ Resolution pH 0.01PH Temp 0.1℃ , Accuracy pH ±0.01PH Temp ±1℃ Operating Temperature 0℃~50℃ Automatic Temperature Compensation 0℃~50℃ Power Supply 4×1.5V(AG13) Calibration , 2 points with auto buffer recognition Dimensions 180mm×45mm×30mm Weight 200g

Minimum Order: 10 long tons

Name: KL-035Z Waterproof pH and Temperature Meter Product description : Measuring range pH 0.00~14.00PH Temp 0℃~55℃ Resolution pH 0.01PH Temp 0.1℃ , Accuracy pH ±0.01PH Temp ±1℃ Operating Temperature 0℃~50℃ Automatic Temperature Compensation 0℃~50℃ Power Supply 4×1.5V(AG13) Calibration , 2 points with auto buffer recognition Dimensions 188mm×35mm×35mm Weight 98g

Minimum Order: 10 long tons

Name: KL-035 Waterproof Pen-type pH Meter Product description : Measuring range pH 0.00~14.00PH Temp 0°C~55°C Resolution pH 0.01PH Temp 0.1°C , Accuracy pH ±0.1PH Temp ±1°C Operating Temperature 0°C~50°C Automatic Temperature Compensation 0°C~50°C Power Supply 4×1.5V(AG13) Dimensions 188mm×35mm×35mm Weight 98g

Minimum Order: 10 long tons

Name: KL-033 Waterproof Pen-type pH Meter Product description : Measuring range 0.00~14.00PH Accuracy

Minimum Order: 10 long tons

Name: KL-03(II) Series Waterproof Pen-type pH Meter Product description : Measuring range 0.00~14.00PH Accuracy

Minimum Order: 10 long tons

FY series pneumatic slurry pump is suitable for conveying chemical slurry with high viscosity (VIS) ≤ 120, 000 CPS/25℃, with explosion-proof, anti-corrosion, anti- precipitation, low noise, energy saving and other functions. It is the ideal mobile conveying equipment. It is applied to artificial leather, film shifting leather, rolling leather, color coating board, printing and dyeing, medicine, coating, chemical industry, textile, painting, spraying, film aluminum plating, color steel tile and other industries. Structure and Principle: The product adopts the effect of pressure difference to make the piston run up and down and drive the guide piston to open and close further to play the role of lifting. Adjust the flow and pressure of working gas to control and adjust the feed flow of pneumatic slurry pump. Combined with pneumatic hydraulic control system can make it work automatically. Usage: 1 - Put the guide tube into the barrel to be delivered correctly. 2 - Connect the corrosion resistant hose to the outlet and connect it to the feeding point. 3, the air inlet valve is closed, and then connect the air source pipe to the air inlet valve joint, according to the required slurry flow to open the air inlet valve to adjust the operating frequency of pneumatic slurry pump, you can work. Maintenance: 1 - FY series pneumatic barrel pump can avoid hitting the cylinder block to avoid deformation, causing the death of life plug, resulting in scrap 2 - After the piston has been operated for more than one million times, the cylinder block should be clear and filled with # 30 lubricating oil according to the accumulation of water in the air compressor's air supply process. 3, if not used for a long time, should be in the solvent working cleaning, to prevent pulp freezing, block the guide pipe. Attention: 1 - Add 30# lubricating oil immediately in case of heating of the cylinder block (subject to hot hand feeling) during work. 2 - If the adjusting nut becomes loose during use and leakage occurs, adjust the nut in time.

Minimum Order: 1 bags

Centrifugal pump automatic water supply equipment Working principle: Tap water enters the tank, and the air in the tank is discharged from the vacuum eliminator. After the water is full, the vacuum eliminator closes automatically. When the tap water can meet the water pressure and water demand, the automatic water supply equipment directly supplies water to the water pipe network through the bypass check valve. When the water pipe network pressure is not satisfied with the water demand, the system through the pressure sensor (or pressure controller, electric contact pressure meter) to give a pump starting signal for pump operation. When pump supplies water, water capacity of water pipeline network is greater than the pump flow rate, system can have normal water supply. If water capacity of the tap water pipe network is less than the pump flow rate, the water from water tank as a counter can still have normal water supply. At the moment, the air from the vacuum eliminator enters the tank to eliminate the negative pressure of tap water pipe network for system to recover to normal status. Main components Centrifugal pump, tank, pipeline, pressure sensor, gauge, check valve, gate valve, ball valve etc. Application: Water supply: filtration and conveying in waterworks, water supply in different zones, supercharging in supervisors, supercharging in high-rise buildings. Industrial pressurization: flow water system, cleaning system, high pressure flushing system, firefighting system. Industrial liquid transport: cooling and air conditioning systems, boiler feed water and condensing systems, machine tool kit, acid and alkaline medium transport. Water treatment: ultrafiltration system, reverse osmosis system, distillation system, separator and swimming pool water treatment system. Irrigation: irrigation, sprinkling irrigation, drip irrigation.

Minimum Order: 1 bags

Bitcoin Miner s21 200T BTC Bitmain Antminer 500$ Wholesales Bulk order free shipping Bitcoin Miner S21 BTC/BCH/BSV SHA256 200T in stock bulk order whatsAp‪+60132067521 Buy Now : $500 IN STOCK Bitmain Antminer S21 200T BTC BCH BSV SHA256 Air-cooling Miner + PSU Specifications, 200T 3500W 17.5J/T Hashrate: 200TH/s Power Watt: 3500W Payment Method: USD BTC USDC USDT Warranty - 12 months shipping ( Dhl , Ups , Fedex , Usps , TNT,aramex,cdek ) ASIC MODEL - Bitmain Antminer , Whatsminer , Innosilicon ,Canaan ,AnexMiner, Goldshell, Hummer ,iBeLink, IceRiver ,iPollo , Jasminer

Minimum Order: 2 barrels

Bitmain Antminer L9 16G / 17G Litecoin Dogecoin miner +psu New $1 ,999 Usdt Bitmain Antminer L9 16G / 17G Litecoin Dogecoin miner +psu New $1 ,999 Usdt WASSP+60132067521 ( 1,999USDT ) IN Stock Bitmain Antminer L9 16G / 17G Litecoin Dogecoin miner +psu New Function - LTC+DOGE BELLS+JKC+LKY+PEP Scrypt Air-cooling Miner Power -3570W Size 195 x 290 x 379mm hashrate - 17Gh/s / 16Gh/s Interface - Ethernet Weight -13500g Asic miner stock : Bitmain Antminer , Whatsminer , Innosilicon ,Canaan ,AnexMiner, Goldshell, Hummer ,iBeLink, IceRiver ,iPollo , Jasminer, Nvidia, Msi Gpu . Warranty : yes Shipping : ( 20$ ) payments ( Bank TT , USD , BTC , USDC , USDT , DOGE , USDC 胡安 ASIC MINERS SUPPLIER #Dogecoin #DogecoinL9Asicminer #altcoins #litecoin #bitcoinminer #ethereum # #asiccoins #aleo #alph #bcn #btc #btm #ckb #dash #dcr #doge+ltc #etc #grin #grs #hns #kas #kda #lbc #litecoin #aleomining #aeboxii Telegram:asicmarketang Customer Support :Warehouse : Unit 05 ,5/F Fu Hang Industrial Building 1 Hok Yuen Hong Kong / Asia market WASSP+60132067521 / WASSP+85294197512

Minimum Order: 2 barrels