Mining, Metal, Plastic & Glass Machinery

AAAC (All Aluminium Alloy Conductors) Product Overview As an experienced bare conductor supplier, Hebei Yingshang Aluminum Industry manufactures high-quality aaac conductor (all aluminium alloy conductor) for modern overhead transmission and distribution systems. AAAC conductors are widely applied in medium to high-voltage power lines, regional distribution networks, and renewable energy grid-connection projects where corrosion resistance, mechanical strength, and long-term reliability are critical. Produced from heat-treated aluminium alloy (commonly 6201 or equivalent), AAAC conductor offers a well-balanced combination of strength, conductivity, and lightweight design. Compared with traditional AAC and steel-reinforced conductors, AAAC provides improved tensile performance and superior resistance to environmental corrosion, making it a proven solution for utilities, EPC contractors, and power grid operators worldwide.   Core Characteristics of AAAC Conductor High Mechanical Strength AAAC conductor is manufactured using high-strength aluminium alloy wire, providing significantly higher tensile strength than pure aluminium conductors. This allows the conductor to withstand greater mechanical tension and supports longer spans, making it suitable for complex terrain, urban networks, and demanding installation environments. Reliable Electrical Conductivity Although aluminium alloy has slightly lower conductivity than pure aluminium, all aluminium alloy conductor still delivers excellent electrical performance that fully meets overhead power transmission requirements. Its optimized strength-to-conductivity ratio ensures efficient and stable power delivery. Excellent Corrosion Resistance Aluminium alloy naturally resists atmospheric corrosion and does not rust. AAAC conductor is particularly suitable for coastal areas, industrial pollution zones, and high-humidity environments, where steel-cored conductors may suffer from accelerated degradation.   Electrical Performance For circular aluminium alloy wires with the same nominal cross-sectional area, DC resistance at 20 °C varies according to conductor size—larger cross- sections result in lower DC resistance. Each AAAC conductor is designed with a defined current-carrying capacity based on alloy composition and conductor cross-section. For example, a 25 mm² aluminium alloy conductor typically supports a current of approximately 110 A under standard operating conditions. These electrical characteristics ensure consistent transmission performance across different voltage classes and load conditions. More: https://www.ysalindustry.com/products.html

Main parameters of WHEN1200 Pedestal Rockbreaker: Model No. WHEN1200 Boom weight(without hammer) 16637kg Max.Horizontal Working radius 14150mm Max.vertical working radius 11784mm Min.vertical working radius 2170mm Max.Height 8400mm Max.working depth 10295mm Rotation 360° Features： Intelligent Multi-Mode Control: Supports cab operation, wireless/wired remote control, and fiber optic + 5G remote video monitoring with a control range of 10-20km. Paired with a high-performance controller. It enables precise positioning and flexible control, offering both wired and wireless dual-mode operation. Robust and Durable Structure: Features high-strength rectangular steel boom beams, large-diameter cylinders, and reinforced pins. The slewing motor incorporates buffer braking. Equipped with a high-performance shock absorption system, core components utilize international brands, structural parts undergo strength verification and aging treatment, and welding processes are mature. High Adaptability: Modular design allows interchangeable attachments like breakers and grabs. Suitable for open-pit/underground mining, metallurgy, cement, and other applications. Capable of long-term operation in harsh environments including corrosion, explosion-proof zones, and high altitudes. Wide horizontal working range with selectable rotation angles. Purchase Notice: Warranty period: 1 year After sales service: During the warranty period, if there are quality issues, we will be available on call Transportation methods: Various transportation methods are accepted Packaging method: Suitable for various types of transportation

Minimum Order: 1 bags

Website: https://ascmparts.com/A&S Construction Machinery Co., Ltd. (https://ascmparts.com/) supplies all kinds of spare parts for various series of Caterpillar equipment. Earthmoving Machinery: Excavators、Loaders、Graders、Backhoe Loaders、Dozers、 Wheel Tractor-Scrapers、Underground Loaders、Off-Highway Trucks、Underground Mining Trucks、Articulated Trucks. Compacting and Road Surface Machinery: Compactors、Pavers、Cold Planers、Road Reclaimers. Piling and Foundation Construction Machinery: Drills、Material Handlers. Tunneling and Mining Machinery: Draglines、Electric Rope Shovels、Hydraulic Mining Shovels. Other Machinery: Pipelayers、Lift Trucks、 etc. More Details: https://ascmparts.com/ Contact Us Grace Min A&S Construction Machinery Co., Ltd. Email: parts@esmachinery.com Tel: +(86) 28 85098851 Address: 469 Xinsheng Road, Wuhou District, Chengdu, Sichuan, China 610041

A&S Construction Machinery Co., Ltd. (https://ascmparts.com/) supplies all kinds of spare parts for various series of KOMATSU equipment. Earthmoving construction machinery: Draglines (9020C, etc.), Excavators (small excavators-PC30MR, mid-size excavators-PC200, large excavators-PC490LC, surface mining excavators-PC1250, demolition excavators-PC490HRD, etc.), Wheel loaders (small wheel loaders-WA70M, mid-size wheel loaders-WA320, large wheel loaders - WA500, surface mining wheel loaders -WA1200, etc.), Dozers (small dozers-D37PXi, mid-size dozers-D51PXi, large dozers-D155AX, surface mining dozers-D475A, etc.), Motor graderS (GD555, etc.), Electric rope shovels (4100XPC, 2800XPC, 1900XPC, etc.), etc. Transport machinery: Forklifts (electric-FB15, IC cushion-FG40S, IC pneumatic- FD25T, narrow aisle-FR15K, standard LPG-diesel powered-FG30T-17, standard electric powered- FB25, pedestrian pallet trucks- MWP15, pedestrian walkie stackers and reach trucks-MWS12, truck-mounted cranes-TM-ZE304, high-capacity forklifts and container handling-FD430, etc.), Trucks (articulated trucks-HM300-5, electric drive mining trucks -930E, mechanical trucks-HD785, etc.), Underground hard rock haulage (underground mining trucks-HD205-2, LHD-WX22, etc.). More Details: https://ascmparts.com/ Contact Us Grace Min A&S Construction Machinery Co., Ltd. Email: parts@esmachinery.com Website: https://ascmparts.com/ Tel: +(86) 28 85098851 Address: 469 Xinsheng Road, Wuhou District, Chengdu, Sichuan, China 610041

Device overview: Electrical Supply: 380V/3P/50Hz Control voltage: 220V,50Hz, 24V Material extruded: HDPE Virgin material or HDPE recycled material Useful Width: 1100≈1150mm Thickness Range: 1.0≈3.0mm Use of plate: visor peak for caps Layer Number: single-layer φ120 Product properties: micro-foamed board or solid board Extruding output: 150≈180KG/H Installed capacity: about 130 KW Total water consumption: about 100 KG/H Device features: 1、The gear reducer of this unit adopts the latest hard tooth surface gear reducer with high strength, high stability, low noise and large bearing capacity. 2、The screw of this machine is high efficiency, double mixing and double metal separation type, which has excellent plasticizing and mixing ability, especially suitable for recycled granule. 3、The barrel cooling system can automatically adjust temperature using oil, water, or gas (users may select the appropriate cooling medium based on specific conditions). This ensures the material undergoes mixing, plasticizing, and foaming at a constant temperature, resulting in uniformly dense foam sheets with sufficient hardness, toughness, and a smooth, flat surface. 4、The three-roll horizontal installation with synchronous drive and frequency conversion speed regulation ensures smooth operation of the calender rolls. The rolls are made of 45# seamless steel pipes treated with special processes to significantly reduce surface gradients, resulting in smooth, flat sheets with clear patterns. The movable frame allows production of sheets with different surfaces without changing the roll position, thereby shortening roll replacement time and improving efficiency. 5、With minor modifications, the production unit can manufacture PP, PE (microfoamed), PS, and ABS sheets for various industries including luggage, handbags, golf equipment manufacturing, packaging, stationery, and medical boards, significantly enhancing its compatibility.

Minimum Order: 1 bags

BHD670 Fixed Rockbreaker Boom System is a crushing equipment used in mining and other fields, the following is an introduction from the performance, advantages, parameters, use cases and so on: Performance: Strong crushing capacity: it can be equipped with a variety of well-known brands of crushing hammers, such as yzh self-produced hydraulic crushing hammers, Finnish RAMMER hydraulic crushing hammers, etc., which can crush 30 tons of ore per hour, with a crushing block size of about 1.5m³, and the maximum crushing hardness of the rock coefficient is F17. Wide range of operations: the working arm can be crushed up to 19m, the nearest can be crushed distance of 2.2m, can work to cover an area of 4m × 4m, slewing angle of 120 °, the maximum working height of 3.5m. Advantages: High efficiency and energy saving: Equipped with high quality hydraulic breaker hammer, combined with the whole machine system integration optimization design, the working efficiency is greatly improved. Meanwhile, the motor drive is clean and energy-saving, and the energy cost is more than 60% lower than traditional diesel equipment. Safe and reliable: the core components are configured by international brands, with reliable quality and high safety coefficient. And it can be operated remotely, which can improve the safety of workers' work and reduce the hidden danger of safety. Easy maintenance: the failure rate is 85% less than the traditional diesel equipment, low repair and maintenance costs, but also reduces the wear and tear of the crusher and extends its service life. Parameters: Discharge particle size of 1000mm, motor power between 30-75kW, equipment weight of 7720kg, can rotate 360°, maximum working radius of 9600mm, maximum vertical working radius of 7320mm, minimum vertical working radius of 7320mm, maximum height of 6350mm, maximum working depth of 5760mm. Use Case: This robot arm is mainly used in the inlet or grizzly screen of all kinds of mines and quarry crushers for secondary crushing of large materials. It can be installed next to the hopper of primary crusher to crush the oversized stones at the grizzly screen mouth, or next to the hopper mouth of truck hopper and tipper, etc. It can effectively solve the problem of jamming and clogging in crushing production line, and improve the output of the crusher in the initial stage by up to 20%.

Minimum Order: 1 bags

The supply chain management services provided by our company are a series of systematic services centered around production, integrating upstream and downstream resources, optimizing processes, reducing costs, and improving efficiency. These services cover the entire chain from raw material procurement to product delivery and after-sales service. I.Procurement and Supplier Management Supplier Development: Screening and evaluating supplier qualifications, establishing a long-term cooperation database. Procurement Strategy: Centralized/decentralized procurement, cost negotiation, dynamic pricing (e.g., futures hedging). Collaborative Optimization: Sharing demand forecasts, jointly developing new materials or processes.

The company's New Product Introduction (NPI) is a systematic process of transforming design concepts into mass-producible products, involving cross- functional collaboration, technical verification, and process optimization. The following are the core contents and key steps of NPI: I. Core Stages and Contents of NPI 1. Project Initiation and Requirements Confirmation Objective Definition: Clearly define product functions, performance indicators, cost budget, mass production timeline, and compliance requirements (e.g., CE, FCC certification).

The company's finished product assembly process involves integrating various components and sub-assemblies into complete products through specific processes. We provide comprehensive plug-in, testing, assembly, and packaging services. The main processes include: board separation, laser marking or inkjet printing, manual/wave soldering, AOI inspection, ICT testing, software programming, FCT testing, conformal coating/potting/dispensing, structural component assembly, connector insertion, PCBA installation, cable routing, reliability testing, and finished product packaging. The company is also actively promoting automation in the finished product assembly process and has introduced fully automated assembly and testing lines for automotive products.

The company's SMT (Surface Mount Technology) process is the core process of its electronic manufacturing services. Through highly automated equipment, tiny electronic components are precisely mounted onto the surface of PCBs (Printed Circuit Boards), achieving high-density and high-reliability circuit connections. What Are SMT Assembly Services? SMT assembly refers to the process of mounting electronic components directly onto the surface of printed circuit boards (PCBs). Unlike traditional through- hole technology, SMT enables higher component density, improved electrical performance, and faster production cycles.

Main parameters of BHB350 Pedestal Rockbreaker: Model No. BHB350 Boom weight(without hammer) 2994kg Max.Horizontal Working radius 5890mm Max.vertical working radius 3880mm Min.vertical working radius 1790mm Max.Height 3580mm Stationary type rock breaker boom system is a machine designed to manipulate large rocks, including reducing large rocks into smaller rocks. It is typically used in the mining, quarrying and aggregate industries to remove oversize rocks that are too large or too hard to be reduced in size by a crusher or grizzly. Stationary type rock breaker boom system consists of four major components: pedestal booms, hydraulic hammer, hydraulic power unit and operating control. All elements are manufactured to stringent quality and safety standards. Our experienced engineering team ensures that customers receive the best solution for their needs, while also positioning the right equipment for optimal safety, reliability, durability, and productivity. CONTROL SYSTEM: 2IN1 Radio Remote Control、Cabin Control System、5G Optical Fiber Teleoperation System Use Case: This robot arm is mainly used in the inlet or grizzly screen of all kinds of mines and quarry crushers for secondary crushing of large materials. It can be installed next to the hopper of primary crusher to crush the oversized stones at the grizzly screen mouth, or next to the hopper mouth of truck hopper and tipper, etc. It can effectively solve the problem of jamming and clogging in crushing production line, and improve the output of the crusher in the initial stage by up to 20%. Purchase Notice: Warranty period: 1 year After sales service: During the warranty period, if there are quality issues, we will be available on call Transportation methods: Various transportation methods are accepted Packaging method: Suitable for various types of transportation

Minimum Order: 1 bags

mesh tube making machine, automatic mesh tube welding machine Straight seaming mesh tube making machine - welded type / bite type Automatic mesh tube rolling and welding machine Width: 660mm/1000mm Diameter range: 110-400mm/ 160-400mm Speed: 2-3 pcs/min Air pressure: 0.6Mpa Total power: 35Kw www.zogutech.com zoguexport@163.com +8617897435530

Minimum Order: 1 bags

straightening slitting and cutting machine applicable material: expanded mesh, filter mesh, metal mesh, galvanized coil etc zoguexport@163.com +8617897435530 www , .zogutech.com

Minimum Order: 1 bags

Wire straightening and cutting machine, normal speed straightening and cutting machine, high speed straightening and cutting machine, straightening machine, wire straightener and cutter, wire cutter, wire straightener, wire straightening machine, wire cutting machine, cutting wire machine, stainless straightening and cutting machine, steel wire straightening and cutting machine. diameter from 1-16mm, cutting length from 100-16000mm, speed: 30-130m/min Wire straightening and cutting machine technical parameters: 2-4/3-6/4-8/5-10/6-12/8-16 mm high speed or normal speed machine all supplying www.zogutech.com zoguexport@163.com +8617897435530

Minimum Order: 1 bags