Offers to Sell

Edge Computing In Transportation Edge computing in telecom is effectively used because of the reduction of delay. GOSDWAN provides sd wan professional services for shipping edge computing for worldwide transportation companies. Company F - Industry - Leading Airlines Group Company F is a domestic branch of a major airlines group in Asia Pacific and the largest travel retailer in the region. With more than 30 brands and a total turnover in tens of billions of USD worldwide, Company F develops leisure and commercial travel businesses in approximately 23 countries including Australia, New Zealand, the Americas, Europe, the United Kingdom, South Africa, the United Arab Emirates, and Asia, and also runs a global business travel management network. Through an application programming interface (API), Company F's online platform integrates bookings, planning information and real-time location data into a social and mobile tool for travelers. Company F is the industry's leading provider of travel technology solutions featuring New Distribution Capability (NDC), and a member of the "One-click Order" campaign launched by International Air Transport Association's (IATA).Here we recommend industrial edge computing from GoSD-WAN. Recommended Smart Cloud Connect Solutions & Services Hybrid WAN Adoption Solve the key challenges of hybrid networking between the traditional MPLS VPN structure and SD-WAN network multiplanes. Multi-cloud Peering Peer-to-peer direct connection with public cloud platforms, light load traffic, independent of Internet channels, Layer-3 BGP routing Hybrid Cloud lnfrastructure Portfolio management of compute resources for distributed multi-cloud management, highlighting the low latency circle coverage of cloud delivery models. GOSDWAN's Innovation in Transportation & Shipping Edge Computing Business Continuity Under the impact of COVID-19, the logistics and transportation industries are struggling with unprecedented pressure for business continuity. A single public safety incident can be followed by a large number of itinerary modifications, and for companies that place a high value on customer experience, it is necessary to establish a front-end architecture based on multiple public clouds, in order to use online tools to interact with customers online at all times, to complete cross-platform aggregation queries without interruption, and to maintain sufficient processing resilience in the system in the event of a sudden increase in operations. Mobility Support The logistics and transportation industries require mobility support not only for the platform in customer service interaction interfaces beyond travel agencies and service counters but also for the field staff working on the front lines. With limited mobility, the company's internal application platform must be extended outward to non-office areas and support executives and authorized personnel with sensitive information in in gaining relevant permissions to perform data updates and maintenance work. Support for mobility is reflected not only in the friendliness to terminal access of different platforms such as Andriod, IOS, and Windows but also in the redefinition of security boundaries, as well as the management of identity recognition and identification of traffic intent at the edge of the enterprise's intranet. After all, during COVID-19, network security issues such as middleman attacks and social engineering show no signs of fading away. Differentiation Between Traffic Application Types The logistics and transportation industries need to optimize cost management to the greatest degree. On the basis of a shared underlying network, the traffic of the network needs to be identified and categorized by labels, and traffic of different classifications require different traffic paths of varying weightage and performance guarantee mechanisms. For critical and sensitive data, redundant and high-quality paths can be taken in transmission to guarantee high availability and security, while non-critical data can be transmitted through lower-level Internet channels. Multiple Data Sources The information elements of the logistics and transportation industries come in large quantities not only from vehicles, flights and logistics stations in the transportation grid, but also from upstream and downstream subcontracting platforms, bank clearing houses, government public data platforms, etc. Both logistics and transportation industries are establishing centralized and unified data views, abstracting all key business operational elements into computable and programmable elements, and introducing big data and AI processing and analytics to improve operational efficiency and reduce the costs of operation and control. Stable interfacing of multiple data sources secure identity authentication, and low-cost offsite data archiving centers are all necessary to support enterprises in building powerful analytics, artificial intelligence, and machine learning. The implementation of this scalable solution will ultimately optimize communication and perception between enterprises and its users. Highlights of Edge Computing in Transportation Hybrid WAN For a transnational giant with operations spanning several continents with thousands of employees, its WAN reconstruction during digital transformation, needs to be integrated with emerging technologies without affecting its business continuity. That means server breakdown caused by new service scenarios is not allowed. The Hybrid WAN architecture provides a deconstructed engineering approach to build large-scale networks, that means, keeping the traditional MPLS-VPN architecture to some extent in the overall network, such as for the existing businesses, while deploying new business zones or new shipping edge computing systems based on SDN, and then transforming the original MPLS-VPN architecture after the new architecture and applications become matured. The Hybrid WAN architecture can also reduce redundancy cost in the WAN architecture. Intelligent Traffic Splitting In the traditional WAN architecture, managing the traffic of enterprise intranet according to service characteristics requires deployment of complex equipment and high operational cost, and the benefit gained is not necessarily proportional to the economic investment. However, when introducing SD-WAN, intelligent routing and traffic splitting can be adopted, where the label redefinition management of the traffic in the whole domain can be achieved through whitelist or traffic signature to distinguish critical traffic from non-critical traffic. Multi-cloud Network The multi-cloud architecture is becoming an universal standard for network deployment and operations in various industries. In realizing high quality interconnection with public clouds, with the help of highly available IP network channels and software-defined tools with direct NNI to all major public clouds, GoSDWAN sd wan company solutions can deliver light-load and high- availability VPNs on IP networks. To ensure fast, flexible and reliable interconnection between regions, above solutions are suitable for large-sized and complex multi-region connectivity scenarios, such as the networking of multiple data centers, multiple clouds and multiple branch offices. As one of the most professional managed wan providers, GOSDWAN has high-quality sd wan service. Welcome to contact us if needed.

Edge Computing In Manufacturing Corporation J - Leading U.S.-Funded Pharmaceutical Company Company J is a US-funded international biopharmaceutical industry leader that is building a global system for new drug R&D and manufacturing services. By empowering global pharmaceutical, biotechnological and medical device companies, Company J expands its services in fields such as chemical drug R&D and manufacturing, medical device testing. With a business platform for R&D innovation projects around the world, it shares industry databases with many research institutions and universities to build a comprehensive data warehouse of case studies and test samples. Company J is currently seeking to integrate its production processes with digital transformation practices, and after introducing sd wan pro services and technologies such as Industrial Internet of Things (IoT), Cloud and big data analytics, to collect a large amount of data for the performance of machine learning and artificial intelligence algorithms in fault prediction, quality assurance, etc. The basis for the convergence of these SD-WAN edge computing technologies is connectivity. Highly secure, flexible and cost-effective intelligent connectivity SD-WAN edge computing is critical, especially the reconfiguration of connectivity between heterogeneous cloud platforms. Here we recommend smart factory edge computing from GoSD-WAN. OSDWAN's Innovation in SD WAN in Manufacturing Multi-cloud Interconnection New edge computing use cases manufacturing is characterized by diversified ecosystem and globalization. The industrial links become more refined, and different ecosystem partners from upstream and downstream links cooperate to achieve the simple goal of reducing costs, increasing efficiency, and balancing supply and demand. Globalization lies in pursuing higher price-performance ratio. To fulfil above two demands, enterprises in the wave of digital transformation with data as the carrier, become more relying on cloud computing and interworking of various kind of cloud products on even different multi cloud connectivity platform across a broader geographical area. Low-latency, Light-load Inter-cloud Routing Public clouds usually have better multi-line Internet egress and larger bandwidth, but it is difficult for cloud providers to guarantee bandwidth SLA for a single tenant. Multiple clouds, especially intercontinental public clouds, can only be synchronized through Direct Cloud Connection based on international lines. But adding hard links is not the most cost-efficient solution for new SD-WAN manufacturing customers. The SD-WAN can accelerate synchronization between heterogeneous public clouds with low-latency, light- load inter-cloud routing without involving dedicated lines, and such routing can be deployed on-demand and on a pay-as-you-go basis. Software-defined Security Systems of different enterprises, although in a common ecosystem, have their own security policies, asset management, and logs to guide task scheduling, decision-making, and distributing instructions. The benefits of digitization and automation are self-evident. However, new SD-WAN manufacturing enterprises also need system security protection measures based on security domain. Frequent manual adjustments of device policies for various access requests bring huge workload to the security management teams. A default feature of SD- WAN software-defined security is to describe security policies in the business language based on the business label, with physical device operations and translation done by the intermediate controller, achieving refined security management in a secure and cost-efficient way. Edge Computing As edge computing reduces network latency, container facilities such as small data centers deployed close to operational sites such as workshops, cab effectively avoid risks resulted from decision latency. In addition to cost reduction in hardware and infrastructure, the value of SD-WAN lies in high- frequency detection of network performance and path mapping to enhance latency awareness. When the network become worse, certain application information is processed on-site rather than being sent to the data center or the cloud via long path, making the data processing more responsive. Edge Computing Manufacturing Technical Design Highlights Heterogeneous Cloud Gateway uCPE is directly generated inside different public cloud VPCs and managed by managed SD-WAN network at the edge of uCPE in the cloud. Transmission performance data of different customer interfaces is mapped in the customer’s visual network management background to provide latency, packet loss, jitter, and application analysis reports periodically. Cross-region Inter-cloud Lateral (east-west) Routing Optimization Without building dedicated lines, the original latency of hundreds of milliseconds is reduced to tens of milliseconds, thereby expanding the transmission capacity, which was previously a bottleneck, by several times. High Redundancy Design With end-to-end redundancy design of the whole network, when the latency index deteriorates, services are automatically switches to a backup path to ensure high availability of the production network. As a professional sd wan managed service provider, GOSDWAN has high-quality sd wan service. Welcome to contact us if needed.

CAS 28578-16-7 PSA：57.29000 LogP：2.29 EIN , ECS：234-232-0 Vapor pressure ：0.0±0.7 mmHg at 25°C Molecular Formula：C13H14O5 Molar Mass：250.25 Density：1.302±0.06 g/cm3(Predicted) Boling Point：327.8±42.0 °C(Predicted) MW:250.247 Melting point:327.8±42.0 °C at 760 mmHg Synonyms: NEW PMK POWDER PMK ethyl glycidate 3,4-MDP-2P ethyl ester 3,4-MDP-2-P intermediate cheap 3,4-MDP-2P ethyl ester Hot selling list: 28578-16-7 PM , K Ethyl Glycidate Powder 5449-12-7  BMK P , owder Glycidic Acid  20320-59-6 Diethyl(phe , nylacetyl)malonate 110-63-4 1,4-Butanediol , 110-64-5 2-Butene-1,4-diol 7331-52-4 (S)-3-hy , droxy-gamma-butyrolactone 5469-16-9 (+/-)-3-HY , DROXY-GAMMA-BUTYROLACTONE 1451-82-7   2-brom , o-4-methylpropiophenone 1451-83-8  2-bromo-3- , methylpropiophenonec 91306-36-4  1,3-Dioxolan , e, 2-(1-bromoethyl)-2-(4-methylphenyl) 49851-3 , 1-2   2-Bromo-1-phenyl-1-pentanone 5337-93-9 ,   4-Methylpropiophenone 1009-14-9 Valerophen , one  877-37-2  2-bromo-4-chloropropiophenone 236117-38-7 2-Io , do-1-(4-Methylphenyl)Propan-1-One  34911-51-8

Minimum Order: 25

This Automatic Blow Molding Machine mainly to use make PETG Materials 10ML-8L capacity cosmetic bottles and sport water kettles (middle size bottles or container) PETG cosmetic Bottle Automatic Blow Molding Machine Advantages 1. Hydraulic system and valves connections from Japanese Yuken industry. 2. Computer control system (PLC) Japanese Mitisubishi PLC Used to control all electrical components and touch screen 3. Auto-deflashing Unit Remove extra parts of products automatically and saving your labor cost 4. Electrical Cabinet All electric components from famous world brand to ensure the quality and stability 5. Touch screen Chinese and English(or other language) All movement operated by touch screen,Make the process full-automatic 6. Advanced technical process All the oil pipes are seamless piple connecting , only our factory use this method , and the oil circulation system design by ourselves, machine run faster , smoother and quieter than other manufacturers. 7. Oil cooling technical Our first-class advanced oil cooling technology , also use different material according to our rich experience , make machine speed quickly and long life. Atomated Single/Double Station Blow Molding Machine Special For Plastic PETG cosmetic bottle or sport water bottle Application: Dual Station Blow Molding Machine Special For Plastic PETG Bottles

EPS (expanded polystyrene) and EPP (expanded polypropylene) are types of foam materials that are often used in shape molding machines. These EPS / EPP foam moulding machines are designed to heat and mold the foam material into various shapes and sizes. EPS EPP shape molding machine features • Automatic operation for high work efficiency • Adjustable temperature and pressure settings • Multiple molding cavities for producing multiple parts at once • The ability to use different types of molds and dies • A control panel for operating and monitoring the machine • Safety features for emergency stop buttons and guards EPS shape molding machine applications • Producing foam packaging materials, such as foam boxes and cushioning • Manufacturing foam parts for a variety of industries, including automotive, construction, and consumer goods • Creating foam prototypes and models for design and testing purposes • Making foam toys and other recreational items

The EPS block machine applies PLC and touch screen with advanced molding technique can produce various shapes of EPS products, the vacuum and hydraulic system can increase molding speed and reduce cooling time. EPS block moulding machine, also known as automatic EPS foam ICF block moulding machine, it is a horizontal EPS block forming machine, can be used for insulation concrete form. Using this EPS molding machine, EPS blocks of different sizes can be obtained efficiently and easily. \ EPS block moulding machine application The EPS block machine applies PLC and touch screen with advanced molding technique can produce various shapes of EPS products, the vacuum and hydraulic system can increase molding speed and reduce cooling time. EPS automatic cement block moulding machine feature 1. This EPS foam block moulding machine adopts PLC programmable controller and touch human-machine interface control, automatic feeding, automatic control feeding process, has formed a complete guarantee automatic cycle of production equipment.excellent quality EPS automatic cement block moulding machine 2. This EPS machine use high quality square tube and welded steel and other groups, each template through heat treatment and after assembly of small deformation, strength and durability.excellent quality eps automatic cement block moulding machine 3. This EPS block molding machine uses a unique heat  penetration of advanced foreign EPS moulding process, penetrating ability, good adhesion, good product quality, significant energy saving features. 4. Adopts PLC(Japan Mitsubishi) and touch screen (French Schneider) with easily operation; 5. Equipped with material level sensor for control the filling, the block cooling is controlled by foam pressure sensor, EPS block machine realizes the filling, heating, cooling and open block mould, the whole working procedure automatically.

Jerry cans, also known as oil cans, with the development of global automotive industry, jerry cans of various sizes are common products in the blow molding industry. Blow molding machines for the production of plastic cans are also Tepai's bestsellers.This Automatic Blow Molding Machine is mainly used to make 250ML-6L Jerry can. The Jerry Can Blow Molding Machine is a cutting-edge and highly efficient solution designed specifically for the production of Jerry Cans through the blow molding process.The Jerry Can Blow Moulding Machine is equipped with a high-performance extrusion system capable of processing a wide range of plastic materials, such as HDPE (High-Density Polyethylene) or PP (Polypropylene). This flexibility enables manufacturers to meet specific customer demands regarding color, size, and design. Tepai continuously develops and manufactures different shapes and multi-layer oil can blowing machinery. The jerry can blow molding machine adopts the mold opening and closing and mold shifting systems, which have a stable structure, balanced force distribution, and a longer working cycle. PLC computer and man- machine interface control result in lower energy consumption and higher output.

The LED bulb housing machine comes with two rotating mould systems for good finish products such as: LED bulb covers, bulb bases. Tepai Plastic Injection Molding Machine adopts automatic production and blow molding at one time, which improves production efficiency and saves labor costs. The LED bulb housing machine comes with two rotating mould systems for good finish products such as: LED bulb covers, bulb bases. Tepai plastic injection molding machine adopts automatic production and blow molding at one time, which improves production efficiency and saves labor costs. LED Bulb Housing Machine Applications LED bulbs are the most efficient lighting sources with long life, flexible design, high energy efficiency, zero UV emissions and low voltage operation to meet market demands for indoor and outdoor lighting. Since the average power consumption of LED bulbs is lower than that of fluorescent and incandescent lamps, there is a huge potential for LED bulb manufacturing.  Tepai rotary injection molding machine has the advantages of low noise, low energy consumption, high efficiency and long life, and the high-speed injection device meets different industrial uses. Moreover, as a professional plastic injection molding machine supplier, Tepai can provide LED bulb housing making solution according to your special requirements!  One step led lamp bulb cover injection blow molding machine is designed for 3w - 5w - 7w - 9w - 12w - 15w - 18w - 22w - 25w led bulb with E27/B22 base and 20w - 30w - 40w - 50w - 60w - 70w - 80w - 90w - 100w - 110w - 120w T Type led lamps

1. Product introduction PFA, also known as soluble polytetrafluoroethylene and Teflon, can be used for trace analysis, isotope detection, ICP-MS/OES/AAS analysis and other experiments. Capacity (ml):5/10/25/30/50/100/200/250/500/1000/2000 2. Product characteristics 1. Strong corrosion resistance: PFA material has excellent acid and alkali resistance and can be used for measuring various chemical liquids without being corroded. 2. High transparency: The transparency of PFA material is relatively high, and the volume of the liquid can be clearly observed. 3. High accuracy: PFA measuring cylinder has precise graduation lines, which can provide accurate liquid volume measurement results. 4. Good heat resistance: PFA material can withstand high temperatures, so it is suitable for some experiments that need to be conducted under high temperature conditions. 5. Insulation resistance: dielectric properties have nothing to do with temperature and frequency; 6. Anti-pollution: low metal element value; 7. It has low dissolution and precipitation characteristics and is a container for storing standard substances and different reagents; 3. PFA series products: Sample bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes, etc. web: https://www.njbinglab.com

The PFA headspace injection bottle, as a high-purity sample vessel for gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS), plays a crucial role in precise analysis due to its excellent chemical inertness, low adsorption, and high temperature resistance. Application in high-precision analysis: -Detection of toxic and harmful gases and volatile organic compounds in environmental monitoring; -Inspection of residual solvents in food packaging materials in food safety; -Determination of solvent residues in raw materials and finished drugs in drug analysis; -Accurate measurement of light and trace components in petrochemical products. #Injectionbottle #PFAVessel #Environmentaltesting #Highprecisionanalysis #Foodtesting #Chemicalpharmaceuticals #Traceanalysis

The neck is equipped with a threaded sealing cover, which can connect 1/4 of the pipe to other reaction devices. The bottom valve of the bottle body can be welded, and various specifications can be customized. Clean and pollution-free, resistant to strong acids and alkalis. #reactionbottle #Perfluoroalkoxyresin #labware #semiconductor #Gaswashing

Molded from chemically resistant perfluoroalkoxy resin and featuring a heavy-wall design, these beakers are ideal for continual lab usage. #beakers #labware #samplepreparation #Geochemistry #traceanalysis #reactionvessel

The full range of 16v and 20v brushless systems gives you variable speed control and a safe braking system with a versatile battery and allows for a large number of charge cycles Battery voltage:20v Output shaft:3/4"Quadrulateral axis No-load speed:1800r/min Impact frequency:2400bpm Maximum torque:2000N.m Bolt specification:M16-M36 Delivery time:30 days Paymnet method:T/T,L/C Standard accessory:BMC BOX*1,Battery*2,charger*1

Minimum Order: 500

The full range of 16v and 20v brushless systems gives you variable speed control and a safe braking system with a versatile battery and allows for a large number of charge cycles Battery voltage:20v Output shaft:3/4"Quadrilateral axis No-load speed:1800r/min Impact frequency:2200bpm Maximum torque:1500N.m Bolt specification:M14-M30 Delivery time:30 days Payment method:T/T,L/C Standard accessory:BMC BOX*1,Battery*2,charger*1

Minimum Order: 500