Offers to Sell

Bangzhao Electric ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller or AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; photovoltaic controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. https://cnbangzhao.en.alibaba.com/p , roduct/1600283342902- 824201543/105ah_210ah_280 , ah_3_2v_Lithium_Lifepo4_battery_cell_rechargeable_ , b attery_charger_energy_storage_cabinet_with_BM , S.html? spm=a2700.shop_index.85.10.7b4d7ffbGX3g , Ei

Minimum Order: 1 bags

Technical Features for Solar oil pumping systems 3 phase 127/220VAC 60Hz wide voltage 450-900VDC PV input off grid power inverter: 1.Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, It withpowerful protection function for short circuit, over load and over temperature which is more safe and reliable.Longer service life can up to 15-20 years or more. 2. Intelligentized, modularized and simple structure design, very easy and convenient for maintenance. 3. Two kinds of start mode: Step Down Voltage Start and Variable Frequency Start. Variable Frequency Start is suitable for inductive load with big instant inrush current(such as motor), inverter’s power not need enlarge too many times when take motor induction load. This function save the cost of frequency converter’s usage, easy to connect wires and control. 4. The output frequency 50Hz/60Hz can be set via LCD panel. 5. The output voltage can be set between -40 % to +20 % of rated voltage. And the accuracy of output voltage is very high less than 1%. 6. The DC input voltage range can be set. over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point and under voltage recovery time all can be set via the LCD panel.Convenient for increasing or reducing the quantity of batteries and solar panel in the future. 7. Wide input voltage can be selected from 100-400v or 300-850v. This wide voltage inputoff grid inverter can work without battery and solar charge controller, which save battery cost and same like with MPPT function can maximum make full use of solar power. 8.Pure sine wave output. with good transient response less than 50MS, little harmonic distortion, higher conversion efficiency and stable output voltage. 9. Low frequency transformer, which ensure the AC busbar and DC busbar are completely isolated, inverter with higher efficiency >94% and very little no-load loss. 10.Powerful data display and fault instruction function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. 11. AC bypass input function optional: Battery Power Priority or AC Bypass Priority work mode can be set. 12. RS485 remote monitoring function optional 13. Solar charge controller and AC to DC battery charger built in optional for customer 14. Can be customized to customer’s specification. More information: https://www.alibaba.com/product-de , tail/Solar-oil-pumping-systems-3- phase_1600266 , 881138.html?spm=a2700.shop_index.84.18.7b4d7ffbwjF , iJK [Optional] · RS485 remote monitoring · AC Bypass input · Built in solar charge controller and AC to DC battery charger

Minimum Order: 1 bags

50KW 60KW 80KW Hybrid Off Grid Inverter Working Without Batteries single ph 1.Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, It withpowerful protection function for short circuit, over load and over temperature which is more safe and reliable.Longer service life can up to 15-20 years or more. 2. Intelligentized, modularized and simple structure design, very easy and convenient for maintenance. 3. Two kinds of start mode: Step Down Voltage Start and Variable Frequency Start. Variable Frequency Start is suitable for inductive load with big instant inrush current(such as motor), inverter’s power not need enlarge too many times when take motor induction load. This function save the cost of frequency converter’s usage, easy to connect wires and control. 4. The output frequency 50Hz/60Hz can be set via LCD panel. 5. The output voltage can be set between -40 % to +20 % of rated voltage. And the accuracy of output voltage is very high less than 1%. more information: https://www.alibaba.com/product-de , tail/50KW-60KW-80KW-Hybrid-Off- Grid_1600548135 , 259.html?spm=a2700.shop_index.84.16.7b4d7ffbwjFiJK , 6. The DC input voltage range can be set. over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point and under voltage recovery time all can be set via the LCD panel. Convenient for increasing or reducing the quantity of batteries and solar panel in the future. 7. Wide input voltage can be selected from 100-400v or 300-850v. This wide voltage inputoff grid inverter can work without battery and solar charge controller, which save battery cost and same like with MPPT function can maximum make full use of solar power. 8.Pure sine wave output. with good transient response less than 50MS, little harmonic distortion, higher conversion efficiency and stable output voltage. 9. Low frequency transformer, which ensure the AC busbar and DC busbar are completely isolated, inverter with higher efficiency >94% and very little no-load loss. 10.Powerful data display and fault instruction function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. 11. AC bypass input function optional: Battery Power Priority or AC Bypass Priority work mode can be set. 12. RS485 remote monitoring function optional 13. Solar charge controller and AC to DC battery charger built in optional for customer 14. Can be customized to customer’s specification. [Optional] • RS485 remote monitoring • AC Bypass input • Built in solar charge controller and AC to DC battery charger

Minimum Order: 1 bags

Performance characteristics: 1. Small size and light weight, Maintenance-free; 2. Environmental protection and pollution-free materials, no heavy; 3. Accurately estimate the state of charge of the battery pack, that is, the remaining power of the battery, to ensure that the power of the battery pack is maintained within a reasonable range; 4. Built-in BMS management system with comprehensive protection and monitoring control functions; 5. 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells; 6. Main control MCU can be centrally controlled and manage peripheral settings (AC charging module, inverter module, solar charging module) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable; 7. BMS battery management system, with SOC automatic calibration and high current passive balance function, combined with perfect operation control and management strategy, to achieve accurate and efficient management; MORE INFORMATION:https://www.alibaba.com/product-detail , /Lifepo4-cells-3- 2v- battery-Lithium_160067 , 1054 , 824.html? spm=a2700.shop_index.82.15.72d67ffbRn , iTZh , 8. EMS energy management system, BMS with solar controller/AC charger, inverter centrally manages charge and discharge, effectively controls the charge and discharge current within the cell usage conditions, protects the cell and extend its service life;

Minimum Order: 1 bags

lithium battery storage charging and discharging system for High voltage El https://cnbangzhao.en.alibaba.com/produc , t/1600478005389- 824201543/lithium_battery_stor , age_charging_and_discharging_system_for_High_v , , oltage_Electric_car_storage_bank.html? spm=a270 , 0.shop_index.85.3.7b4d7ffbGX3gEi 1) Bangzhao Company’s BMS battery management system uses automotive-grade RAM, AD sampling chip, stable and reliable performance, and a 5-inch high- definition touch screen, which is simple and convenient to operate. 2) The power inverter adopts the imported Mitsubishi sixth-generation IPM intelligent power module design scheme, with power frequency isolation, simple structure, low failure rate and high efficiency. 3) The solar controller adopts IGBT module design, PWM algorithm, stable and reliable charging efficiency, and can be linked with the BMS system to strengthen the protection of the battery. 4) The solar combiner box adopts DC 1000v, with LED indicating fuse holder, DC professional surge protector, and high-power anti-reverse module. (optional) 5) The product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform 6) The system software supports remote and local upgrade functions 7) 3000 cycles life span is more than 10 years 8) 30kwh to 1000kwh can customizable production 9) The color and size of the case can be customized according to requirements and OEM

Minimum Order: 1 bags

Rectifier AC to DC battery charger Cabinet from 20A~300A/150V~1000VDC wide voltage range https://www.alibaba.com/product-detail/Re , ctifier-AC-to-DC-battery- charger_1600095529880 , .html?spm=a2700.shop_index.82.5.7b4d7ffbwjFiJK , Rectifier AC to DC battery charger Cabinet from 20A~300A/48V~1000VDC wide voltage range BEG Series battery charger is developed specially by Zhejiang Bangzhao Electric Co.,Ltd for DC battery system charging station. With single phase AC input, it has the advantages of high efficiency, high power density and low harmonic. --Solar-Wind Power System / City Grid (On/Off) / Community and Family --Telcom Base / CATV system / Computer Server Center / Medical Instrumnt / Military Equipment --Security and Electronics / Mobile POS, Mining Lihgt / Torch / LED Light / Emergency Light --RV Motorhome /Golf Carts Battery / Boat Marine Yachts / Electric Skateboard / Electric bike / Electric Scooter / Electric bicycle --LED Backup / Engine Starting Battery,etc.

Minimum Order: 1 bags

30KV,50KV,80KV,90KV Ultra Low Frequency VLF Hipot Tester,high voltage gener https://www.alibaba.com/product-detail/30 , KV-50KV-80KV-90KV-Ultra- Low_1600101895358.html , ?spm=a2700.shop_index.86.2.7b4d7ffbwjFiJK 30KV, , 50KV,80KV,90KV Ultra Low Frequency VLF Hipot Tester,high voltage generator withstand tester Product Description BVLF (Very Low Frequency) Testers are suitable for testing power cables, transformers, switchgear, rotating machinery and other electrical apparatus. The product combines modern advanced digital variable frequency technology and micro computer control together, therefore, it can realize the full automatic voltage boost, stepdown, measurement and protection as well as the manual intervention in the process of automatic voltage boost. The full electronic design ensures the small size and light weight. The big LCD screen ensures the clear and visual display, and can display the output sinusoidal wave form. The printer outputs test reports. In addition, the product has features as follows: Features Large touch screen：It adopts 7-inch touch screen and the latest ARM7 microcontroller. Advanced technology：Using digital frequency conversion technology, microcomputer control, step-up, step-down, measurement, protection and other testing processes are fully automated. Easy to operate：The wiring is simple and fool-proof operation. Comprehensive protection: Multiple protections (overvoltage protection, high and low voltage side overcurrent protection), rapidaction (action time ≤ 10ms), the instrument is safe and reliable. Safe and reliable：The controller and the high-voltage generator are connected with low voltage, photoelectric control, safe and reliable to use. High and low voltage closed loop circuit：High and low voltage closed-loop negative feedback control circuit is adopted, and the output has no capacity increase effect. Complete configuration：Capacitive touch screen, LCD Chinese character display, automatic storage, automatic printing. Large test range：0.1Hz,0.05Hz and 0.02Hz Multiple frequency selection, large test range. Small size and light weight：Very conducive to outdoor operations. Chinese-English switching function：Chinese-English switching, using imported high-voltage electronic switch to switch polarity. High-speed AD acquisition circuit, and equipped with USB background management software. Longer life and lower failure rate. Output frequency：0.1Hz，0.05Hz，0.02Hz Load capacity： 0.1Hz max 1.1μF 0.05Hz max 2.2μF 0.02Hz max 5.5μF Measurement accuracy：3% Voltage positive and negative peak error：≤3% Voltage waveform distortion：≤5% Conditions of Use：indoor，outdoor； Temperature：-10℃- , +40℃ Humidity：≤85%RH Power：110KV-260 , KV(+-5%)

Minimum Order: 1 bags

IP45 outdoor off alone energy system high power sine wave inverter for wind controller system https://www.alibaba.com/product-deta , il/IP45-outdoor-off-alone-energy- system_160038 , 4522750.html?spm=a2700.shop_index.89.10.7b4d7ffbGX , 3gEi Inverter-Controller One Machine Our BZPC series Inverter-Controller One Machine is one of the most advanced DC to AC conversion products in the world, it is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine and other renewable energy systems and etc, can supply power and provide guarantee effectively for the areas with traffic inconveniences, in the mountains, pastoral, border, island and other areas without electricity. It has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is high efficiency and low no-load loss, and no pollution. The inverter can also supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply.

Minimum Order: 1 bags

High-power charger-smart lithium battery charger-constant current and constant voltage charger BEG Series Smart battery charger is developed specially by Zhejiang Bangzhao Electric Co.,Ltd for DC battery system charging station. With single phase AC input, it has the advantages of high efficiency, high power density and low harmonic. Feature: 1, Hot plug ,convenient maintenance 2,Advanced current sharing technology 3, Control of input limited power 4, Control of output constant power 5, Temperature limited power 6, Regulation of output current limiting point and Regulation of output voltage 7,Fan control is built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 8, Multiple protection functions, such as protection of input overvoltage/ voltage shortage,Output overvoltage protection,over temperature protection,short circuit protection,protection of internal bus fault,protection against fan fault 9, Interruption of background communication 10,Monitoring performance 11,Modular design,N+1pcs backup 12, High efficiency,up to 95% 13，Intuitive display by LCD screen More information:https://cnbangzhao.en.alibaba.com/prod , uct/1600188083514- 803922606/High_power_charger , _smart_lithium_battery_charger_constant_curren , t_ and_constant_voltage_charger.html?spm=a2700. , shop , _index.89.3.7b4d7ffbA9auig

Minimum Order: 1 bags

Welcome to the world of grapes, the delightful and nourishing fruits that, botanically, fall under the category of berries. Bearing the botanical name Vitis viniferous, grapes are a culinary delight appreciated globally. As Yeshasvi Exporters Pvt Ltd, leading Indian grape exporters, take pride in contributing to the international market as an emerging and most trusted global grape exporting company. Our commitment to quality sets us apart as leading Indian grape exporters, ensuring that the grapes we offer not only vary in size and colour among different varieties but also stand out for their exceptional taste, nutrient content, and low calorific value. As an international grape exporter from India, our commitment to quality, reliability, and customer satisfaction has positioned us as a global grape exporting company. When you choose us, you embrace the assurance of superior grapes, backed by dedication. Experience the sweetness and wholesomeness of our grapes, symbolizing a commitment to quality that transcends geographical geography.

　　In the world of industrial machinery, the performance of components is often dictated by their operating conditions. One such component, the NBR (Nitrile Butadiene Rubber) oil seal, is no exception. This article will delve into the working temperature range of NBR rubber oil seals and why it matters. 　　NBR rubber oil seals are widely used due to their excellent resistance to petroleum-based oils and fuels, silicone greases, hydraulic fluids, water, and alcohols. The NBR material is known for its strong wear resistance, good elastic properties, and low compression set. 　　However, like all materials, NBR has a specific working temperature range. The working temperature range of an NBR oil seal typically spans from -40°C to 125°C. This range is a general guideline and can vary based on the specific formulation of the NBR material. 　　Why does this matter? The working temperature range is crucial as it dictates the environments in which the NBR oil seal can function optimally. If the seal is subjected to temperatures below the lower limit, it may become too rigid and lose its sealing ability. Conversely, if the temperatures exceed the upper limit, the seal may become too soft, leading to deformation and potential failure. 　　Therefore, when designing or maintaining a system that uses NBR oil seals, it’s essential to consider the operating temperature. If the system is expected to function outside the NBR’s working temperature range, alternative materials like FKM (Fluoroelastomer) or Silicone might be a better choice. 　　Understanding the working temperature range of NBR oil seals is crucial for their optimal performance and longevity. By considering this factor, engineers and maintenance personnel can ensure the reliability and efficiency of their equipment.

Minimum Order: 100

PRODUCT DESCRIPTION 4-channel pulse plastic thermal riveting controller for high-efficiency and reliable riveting: Utilizing Pulse Heating Technology: The HN-1000-4 employs advanced pulse heating technology, delivering precise and controllable energy pulses to the riveting area. This technology enables localized and instantaneous heating, ensuring efficient and accurate melting of plastic components. Efficient Heating and Cooling Cycles: The machine facilitates rapid heating and cooling cycles, optimizing the riveting process for efficiency and reduced production time. It achieves fast and controlled heating to melt the plastic components, followed by controlled cooling to solidify the joint effectively. Simultaneous Multi-Point Riveting with Independent Channel Control: With its 4-channel capability, the machine allows for simultaneous riveting of four points, significantly enhancing overall efficiency and productivity. Each riveting point can be controlled independently, enabling customized parameter settings for each individual point. This feature offers flexibility in accommodating diverse riveting requirements and variations in plastic components, as operators can adjust parameters such as temperature, heating time, and pressure for each specific point, optimizing the riveting process for various applications. Versatile Applications: Pulse plastic thermal riveting machines find applications in various industries, including automotive, electronics, medical equipment, consumer goods, and more. They are suitable for joining plastic components in assemblies, such as securing panels, fastening electronic components, or attaching various plastic parts. Model HN-1000-4 Rated voltage AC 200V~240V 50Hz Rated power 4000W Output voltage AC 3.8V Heating temperature set range 50~600℃ Thermocouple type Type E Communication interface RS-485/Ethernet Number of program groups 5 groups Number of temperature segments 4 segments Parameter password Yes Number of channels 4 Cooling method Air cooling High efficiency It can simultaneously rivet 4 rivet points Attention: Parameter changes caused by product upgrades or other factors will not be notified separately. The physical product shall prevail. Hereby declared! Below are the corresponding challenges and actual riveting results when riveting different types of plastic materials with this product. Serial Number Material Name Difficulty of Riveting 1 ABS easy 2 ABS+PC easy 3 AES easy 4 AS easy 5 ASA easy 6 PA6 generally 7 PA66+GF30 generally 8 PBT easy 9 PBT+GF30 generally 10 PC easy 11 PE easy 12 PET generally 13 PMMA easy 14 POM easy 15 PP easy 16 PPO easy 17 PPS+GF30 generally 4 Channel 4000W Pulse Plastic Hot Riveting Tools Controller Hot Riveting Plastic 04 Channel 4000W Pulse Plastic Hot Riveting Tools Controller Hot Riveting Plastic 14 Channel 4000W Pulse Plastic Hot Riveting Tools Controller Hot Riveting Plastic 2 Company Profile : Established in 2009, SUZHOU MEIHAO HEAT STAKING TECHNOLOGY CO.,LTD. is a professional company engaged in the research, development, production, sales, and service of plastic heat staking equipment. With over 14 years of industry experience, we are committed to providing high-quality heat staking equipment to our customers. Our products have gained significant market share domestically and are exported to multiple countries worldwide. Our primary product lines include pulse plastic heat staking equipment, plastic hot air cold staking equipment, and pulse heat press welding equipment. These equipment are widely utilized in industries such as automotive, electronics, and household appliances. With a professional R&D team, we prioritize technological innovation and product optimization within the industry. We continuously innovate and improve our equipment to meet the evolving needs of our customers. If you require a custom-made product, please contact us first to obtain detailed information.

Product Description: The Miniature Atomizing Dryer, also known as the Laboratory Spray Dryer or Compact Spray Dryer, is a powerful and efficient drying solution that offers superior performance. It features an atomizing power of 0.75KW, atomizing air flow of 1.2-2.5m³/min, and an inlet temperature of 140-180℃. Additionally, it is constructed with superior-grade stainless steel and operates on 220V/50Hz voltage. This Laboratory Spray Dryer is ideal for laboratory research and other small scale drying applications. Its small size makes it easy to install and operate, and its reliable performance makes it exceptionally efficient and cost-effective. This Laboratory Spray Dryer is an ideal choice for laboratories and industrial applications. Features: Product Name: Small Scale Spray Dryer/Miniature Atomizing Dryer/Laboratory Atomizing Dryer Atomizing Air Pressure: 0.3-0.6MPa Inlet Temperature: 140-180℃ Noise: ≤80dB Dimension: 1000*800*1700mm Outlet Temperature: 50-80℃ Technical Parameters: Keywords Details Small Scale Spray Dryer, Miniature Atomizing Dryer, Laboratory Spray Dryer Dimension: 1000*800*1700mm Atomizing Air Pressure 0.3-0.6MPa Voltage 220V/50Hz Noise ≤80dB Atomizing Air Flow 1.2-2.5m³/min Atomizing Power 0.75KW Heating Power 9KW Power 2.2KW Outlet Temperature 50-80℃ Inlet Temperature 140-180℃ Applications: Lab Spray Dryer is a compact, laboratory atomizing dryer designed for small scale spray drying applications. It has an atomizing power of 0.75KW and a weight of 200KG, making it an ideal choice for research and development purposes. The Lab Spray Dryer features a 2.2KW power and an inlet temperature range of 140-180℃, enabling it to quickly and reliably produce a wide range of high-quality spray dried products. Its small size and light weight make it a great choice for applications where space and portability are key requirements. Whether it’s for R&D or small-scale production, the Lab Spray Dryer is the perfect choice for any laboratory atomizing dryer needs. Customization: Our Lab Spray Dryer offers customised service, featuring small scale spray dryer, miniature atomizing dryer, and small scale spray dryer. It is made from stainless steel, with an inlet temperature range from 140 to 180 ℃, noise level below 80 dB, power of 2.2 KW, and dimension of 1000 * 800 * 1700 mm. Support and Services: Lab Spray Dryer Technical Support and Service We provide professional technical support and service for Lab Spray Dryers. We provide guidance and assistance in the installation and operation of Lab Spray Dryers. We offer remote and on-site troubleshooting and repairs. We provide preventative maintenance to keep Lab Spray Dryers in optimal condition. We provide spare parts for Lab Spray Dryers. We offer technical advice and guidance on Lab Spray Dryers. Packing and Shipping: Packaging and Shipping of Lab Spray Dryer: The Lab Spray Dryer will be securely packaged in multiple layers of bubble wrap and cardboard for safe delivery. Shipping will be done via insured mail or a reliable courier service. Tracking information will be provided upon shipment of the product.

PRODUCT DESCRIPTION Steel Channel Post Base/Channel Fittings Accessories/C Channel Accessories They can be quickly adjusted or repositioned as needed, making them suitable for dynamic installation requirements. Channel fittings are designed to withstand harsh environmental conditions, including vibrations, moisture, and extreme temperatures. They are resistant to corrosion, ensuring long-lasting performance in challenging environments. Standard Steel Channel Post Base Accessories C Channel 1-5/8" 0 Product Show: Standard Steel Channel Post Base Accessories C Channel 1-5/8" 1Standard Steel Channel Post Base Accessories C Channel 1-5/8" 2Standard Steel Channel Post Base Accessories C Channel 1-5/8" 3Standard Steel Channel Post Base Accessories C Channel 1-5/8" 4 Hengtong’s advantages: 1.we can do the designs according to the customers' requirement 2.we can open the new mould as per customers’ requirement 3.we can offer you the high quality & competitive price 4.we can offer your a good after-sale service . Other services are consulted in dealing.Specifications and package could be customized If you have any inquiry,please feel free to contact me and advise which exactly item(type) you need. Company Information Wuxi Hengtong Metal Framing System Co., Ltd(HENGTONG) is one of the well estalished firms in Wuxi for the past 20 years meeting the requirements of Pipe Supporting Systems. We have a good contact with domestic and foreign manufacturers and suppliers producing and supplying original branded pipe supporting materials. It provide kinds of quality and original products for clients. HENGTONG manufacture P41 series strut channels, U shape channels, angle steels, channel fittings, brackets, cantilever arms, beam clamps, pipe clamps etc. Our factory is located in Wuxi which is about 130km from Shanghai port, which is very convenient to deliver goods. Standard Steel Channel Post Base Accessories C Channel 1-5/8" 5 Why choose us? 1. Customized service is available according to the customers' requirement 2. OEM is available 3. High quality & competitive price 4. Good after-sale service Packaging & Shipping Material in stock can be produced (procedure 5-20days) right away after pre- payment confirmation. COSCO Mearsk MSCship to worldwide for safe shipping, don't worry about package damage or loss. It takes about 15-40 days to worldwide, Please note us your contact details include your phone number for easy contacting from shipping company officer. By sea Shanghai port, Ningbo port or others By air Shanghai Pudong port By express DHL, TNT, FedEx, UPS etc Standard Steel Channel Post Base Accessories C Channel 1-5/8" 6