Offers to Sell

ZJ Series Coal Slurry Pump: High-Efficiency Solution for Abrasive Slurries Introduction to ZJ Series Coal Slurry Pumps The ZJ Series Coal Slurry Pump is a single-stage, single-suction, double- casing centrifugal horizontal slurry pump designed to handle highly abrasive and corrosive slurries. Engineered for optimal performance under various industrial conditions, these pumps are widely used in coal washing, mining, power generation, and metallurgical industries. Their adaptability to different speeds ensures efficient slurry transportation with minimal energy consumption. ZJ Pump is widely used in metallurgy, mining, mineral processing, dredging, de- watering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material...etc. various industrial sites. For different duties, pump is named as High head pump, High pressure pump, Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump,Transfer pump Thickner Underflow Pump, De-watering screen pump, Pressure pump, Concentrate pump.   Specification: Flow rate: 4.5m³/h~4000 m³/h, Head: H=6m~134m, Speed: n=590～2950r/min, Operating temperature: T ≤ 100 ℃   Key Features of the ZJ Series Coal Slurry Pump： ● High efficiency; energy-saving; light weight; reasonable construction; reliable performance; little vibration; low noise; easy maintenance. ● Various design of the pump speed and versions enable the pump to work even under poor conditions. ● The bearing layer and the wear layer can be separated. And the wet parts are made from strong abrasion resistance high-chrome alloy cast iron. ● Three types of shaft seals, mechanical seal, packing seal and packing combined expeller seal can be adopted. ● The pump discharge can be positioned to 8 directions at intervals of 45 degrees according to need. The inlet is horizontal. ● The medium transferred temperature should not exceed 60ºC. The weight concentration of the mortar should not exceed 45%; mineral slurry, 60%. ● The pumps can be installed in multi-stages for long distance delivery. ● Drive mode: mainly direct connection(DC). ● Lubricating way: 40ZJ-200ZJ adopts grease or oil lubrication according to bearing box structure; 250-500ZJ adopts grease lubrication. Applications of Coal Slurry Pumps in Industrial Settings 1. Coal Washing & Processing Coal slurry pumps play a critical role in coal preparation plants, transporting coal fines, tailings, and dense media. These pumps handle high- density coal slurries, ensuring efficient separation and processing. 2. Power Generation Power plants use coal slurry pumps for handling fly ash, bottom ash, and coal-water mixtures, reducing waste and improving operational efficiency. 3. Mining & Mineral Processing In mining operations, ZJ series pumps transport ore slurries, tailings, and thickened concentrates, ensuring a steady flow of materials during extraction and processing. 4. Chemical & Metallurgical Industries These pumps handle abrasive chemical slurries, metal processing residues, and byproducts in metallurgical plants and chemical industries. 5. Dredging & Sand Handling With their high-abrasion resistance, ZJ slurry pumps are widely used in dredging, sand mining, and gravel processing. Why Choose the ZJ Series for Coal Slurry Pumping? · Engineered for Harsh Environments – Built for high-density coal slurries, ensuring maximum wear resistance. · Customizable Seal Options – Available with mechanical seals, packing seals, or combined expeller seals. · Heavy-Duty Bearings & Lubrication – Ensuring long-term, stable operation under extreme conditions. · Global Supply & Support – Trusted by industries worldwide for coal washing, power plants, and mining applications. Get the Best Coal Slurry Pump for Your Operation! For inquiries, custom specifications, or a quote, contact our experts today.

It is suitable for conveying liquids containing solid particles such as sand, coal slag, tailings, etc. It is mainly used for the removal and transportation of slurry liquids in metallurgy, mining, thermal power plants and other enterprises. It is an ideal substitute for traditional mud pumps. In addition to the main impeller, a set of stirring impellers are added to the bottom of the pump, which can spray the deposited sludge into turbulent flow. The pump can achieve high-concentration transportation without auxiliary devices. The operating reliability of the unique sealing device greatly extends its service life. The electrode adopts overheat protection, and various protection devices such as near-water detection can be added according to user requirements, which can operate safely under severe working conditions. Performance parameters: Flow range: 15-2000m3/h Head range: 10-95m Power: 7.5-315kw Maximum passing particle size: 92mm Material: High chrome alloy, SS304, SS316, SS316L, etc Features: ★ The motor is protected by a mechanical seal, which can effectively prevent high-pressure water and impurities from entering the inner cavity of the motor. ★ In addition to the main impeller, there is also a stirring impeller, which can stir the sludge deposited on the bottom of the water into a turbulent flow and then extract it. ★ The main flow parts such as impeller and stirring impeller are made of high wear-resistant materials, which are wear-resistant, corrosion-resistant, non- clogging, and have strong sewage discharge capacity, and can effectively pass larger solid particles. ★ It is not limited by the suction range, the slurry suction efficiency is high, and the silt dredging is more thorough. ★ There is no need to equip auxiliary vacuum pump, so the investment is lower. ★ There is no need to be equipped with auxiliary stirring or spraying devices, making the operation easier. ★ The motor is submerged under water, no complicated ground protection and fixing devices need to be built, and the management is easier. ★ The stirring impeller directly contacts the deposition surface, and the concentration is controlled by the depth of the dive, so the concentration control is more free. ★ The equipment directly dives into the water to work, there is no noise and vibration, and the site is more tidy.

The SF foam pump is robustly constructed, designed for continuous pumping of highly abrasive and corrosive foamy slurries. SF mining flotation process pump is equivalent to Warman AF series foam pump. SF vertical foam pumps are designed to efficiently treat foamy sludge by deaerating the foam, through an induced vortex effect, before it enters the pump impeller. It has a vertical shaft configuration and includes a hopper, with a set of vertical bearings and a "HS" type pump wet end. It features a wide choice of covers and replaceable abrasion-resistant metal or molded rubber wheels. Warman Froth Pump Model: 2QV-AF, 3QV-AF, 4QV-AF, 6SV-AF, 8SV-AF Important design features of this pump range include: ★ Cartridge type bearing assembly ★ Robust threaded turbine attachment ★ Through-bolt design throughout ★ Replaceable case liners ★ Choice of metal or rubber coating and wheel ranges ★ Minimum number of housing bolts

The SAHF Horizontal Froth Slurry Pump is pumping slurry with obstinate froth, which is equivalent to warman Froth Pump AHF Series. It is specially design for handing foam and solid slurry mixture. Design features: Take a small bulk, high efficiency. Special froth impeller with large inlet size, this benefit to the large size solids. There is difference between pumping froth slurry and normal slurry. The horizontal froth slurry pump is upto high performance to pump high viscosity slurry. The problem of handling froth in some process circults can be very frustrating. Froth often will air bind a standard pump. The froth inducer blade impeller solves this problem. ● The pump inside liner is corrosion resistant rubber material or metal. ● The impeller is anti-abrasive type high chrome metal impeller or rubber, or mixed assembly. ● Small structure but high efficient. ● Low power costs, reliable operation, minimal surging, and feed tank overflow make horizontal froth pumps    user friendly. ● Simplified maintenance. Applications ● Suitable for various liquids performance, which is the first select product for handling mine mill slurry and     tailing slurry. ● Basing on medium condition can choose different materials as A05, A07, A49 etc. ● Iron Ore Dressing Plant ● Copper Concentration Plant ● Gold Mine Concentration Plant ● Molybdenum Concentration Plant ● Potash Fertilizer Plant ● Other Mineral Processing Plants ● Other industries

Dried Japanese local SEAWEEDS for sale.

Minimum Order: 10 long tons

Features   Full automatic terminal crimping machine, using high-tech frequency conversion technology, electronic precision positioning, when pressure welding machine working noise is smaller than the traditional terminal, and save electricity, the variable is more convenient and quick, avoid the traditional terminal clutch,   cable lug crimping machine   Specifications: full automatic terminal crimping machine   1. Full automatic terminal crimping machine 2. Built-in frequency converter, high speed and low noise 3. One machine is suitable for various terminals, very easy to change mold. 4. Support manual mode and automatic mode, you can adjust the machine easily in manual mode. 5. LED display will show how many terminals have been crimped. 6. Speed is adjustable, crimping die designed according to your requirement. Parameter Size:720L*850 , W*1650H Weight:265KG Display:Color LCD touch screen Mode of operation:Auto run + manual operation Blade adjustment method:Motorized adjusting Blade material:Swedish ASP60 powder high speed steel cutter materials Wire stripping/tin length:4mm-10mm Suitable wires:AWG18—28# cutting speed:4300 PCS/hour working ability:2200PCS/hour Crimp force:standard 2.0T Other pressure relays need to be customized Air pressure:5.0KG (stability, dry air) Power:AC 220V Rated power:2.5KW Detector:1.terminal exists or not 1.wire exists or not 3.press exists or not 4.air pressure exists or not

Minimum Order: 1 bags

Features   Full automatic terminal crimping machine, using high-tech frequency conversion technology, electronic precision positioning, when pressure welding machine working noise is smaller than the traditional terminal, and save electricity, the variable is more convenient and quick, avoid the traditional terminal clutch,   cable lug crimping machine   Specifications: full automatic terminal crimping machine   1. Full automatic terminal crimping machine 2. Built-in frequency converter, high speed and low noise 3. One machine is suitable for various terminals, very easy to change mold. 4. Support manual mode and automatic mode, you can adjust the machine easily in manual mode. 5. LED display will show how many terminals have been crimped. 6. Speed is adjustable, crimping die designed according to your requirement.  

Minimum Order: 1 bags

Product Details: full-automatic flat cable terminal crimping machine Specification: 1.6100pcs/hour,full-automaticall , y one end terminal crimping,stripping two ends of terminal. 2.High definition LED screen display,language of HMI can be customized as customer’s need, 3.Full automatically computerized,accurate parameter debugging 4.Complete Detection function:wire detection,terminal detection,alarm when machine run wrong 5.OTP transverse mode and Direct mode change easily,automatic receive wastes of terminals, cut wastes of terminals   Automatic terminal crimping machine(One end of terminal crimping) Charactors:Cutting wire,stripping of wire(Single-end and two ends stripping),Single-end crimping,Single-end twisting,,Multi-style of peeling wire   Parameter: Model HL-01 Suitable wire range: AWG16#--AWG28# Speed :4000-6000pcs/hour Cutting length:20-9999mm Cutting accuracy :1mm+Cutting Length below 0.2% Stripping length :0.1mm-10mm Air pressure :0.4-0.6Mpa Crimping capacity :2 tons Detection function: wire or not, blocked, etc Voltage :AC 220V 50Hz/ 60Hz Dimensions: 700X600X1500mm

Minimum Order: 1 bags

HW200A-S series high-pressure plunger pump is a kind of ultra-high-pressure plunger pump, which adopts the technical characteristics of imported products for reference. The pressure of the pump is 160MPa and the flow rate is 33-93L/min, which is required by high-pressure water jet, Suitable for ultra-high pressure water jet cleaning, metal cutting, ship cleaning rust and chemical plants, sugar plants, power plants and other condenser, heat exchanger,evaporator, boiler and other tank tank cleaning. This series of products can transport 0 ~ 50℃ water, emulsion, and other chemical property similar to water liquids.

Minimum Order: 1 bags

HW250E-S series high pressure plunger pump is a new generation high pressure plunger pump independenty developed by our company. The pressure can reach 275 MPa. Technical features: 1. Straight-through hydraulic end, advanced technology,reasonable design, higher volumetric efficiency. 2.Polymer sealing material, self-adjusting pre-tightening force with pressure, sealing automatic compensation 3.Cemented carbide plungers are rugged durable. 4.Easy Maintenance, one person can complete the hydraulic end maintenance and replacement of wearing parts. 5.The hydraulic end parts are made of precipitated hardened martensitic stainless steel, which are reliable and durable. 6.This product is matched with the new diaphragm type safety valve (original imported diaphragm) , easy to operate, safe and reliable. This series of products can transport 0 ~ 50℃ water, emulsion, and other chemical property similar to water liquids, This series of high pressure pumps are widely used in jet cleaning, power, powder metallurgy and other industries.

Minimum Order: 1 bags

The 3003 non-stick aluminum circle is a high-quality aluminum disc product made from 3003 aluminum alloy. It is produced through rolling, drawing, stamping, and annealing processes. As a member of the Al-Mn (aluminum-manganese) series, 3003 aluminum offers excellent corrosion resistance, good ductility, outstanding thermal conductivity, and superior forming performance. It is widely used in kitchen cookware, utensils, lighting reflectors, electronic shells, and pressure vessels due to its balance of strength, lightweight properties, and formability. Different Tempers and Applications 3003-O Aluminum Circle The "O" temper refers to the fully annealed (soft) condition. This state offers maximum ductility and formability, making it ideal for deep drawing, spinning, and complex forming processes. The O temper minimizes cracking and waste during manufacturing. 3003-H18 Aluminum Circle The "H18" temper is strain-hardened to achieve maximum hardness. It is suitable for applications where higher strength and hardness are required, or as a base material for composite bottom cookware. Some manufacturers also use H18 circles for shallow drawing or stamping, producing cookware with a stiffer body. Why Choose 3003 Aluminum Circles for Non-stick Cookware? 1. Excellent Heat Conductivity It ensures even heating of the pot body, rapid temperature rise, effectively reduces cooking time, and enhances the user experience. 2. Outstanding Corrosion Resistance Thanks to its manganese content, 3003 aluminum resists oxidation and chemical corrosion, even in humid and high-temperature kitchen environments, ensuring a longer cookware lifespan. 3. Superior Formability and Weldability The alloy's good ductility allows deep drawing, spinning, and stamping without cracking, meeting the diverse forming needs of cookware manufacturers. 4. Food-Grade Safety It meets the stringent standards of various countries for food contact materials (EU LFGB, US FDA, etc.) to ensure that no harmful substances are released during cooking, making it safe and reliable. 5. Lightweight Aluminum has a density that is only one-third that of steel, making non-stick pans lighter and conducting heat faster, meeting the energy-saving and ergonomic needs of modern kitchens. Application Fields Non-stick cookware: the core material for all kinds of non-stick woks, frying pans, and soup pots. Pressure Cooker Liners: Ensures uniform heat under pressure and durability under repetitive use. Bakeware: Used in cake pans, pizza trays, and baking sheets for efficient heat transfer. Appliance Inner Pots: Ideal for rice cookers, multi-functional pots, and other household kitchen appliances. Company Profile As a professional aluminum circle manufacturer, our company covers an area of over 60,000 square meters and is equipped with 6 aluminum circle punching lines, 3 hot rolling lines, annealing furnaces, and surface cleaning equipment. With an annual production capacity exceeding 30,000 tons and more than 20 years of aluminum processing experience, we offer comprehensive technical support - from alloy selection, forming analysis, to surface coating solutions. We provide OEM and ODM services, customized according to clients＊ requirements for size, tolerance, surface finish, and coating types. Our products are exported to Southeast Asia, South America, the Middle East, Europe, and Africa, serving over 40 countries. We maintain long-term partnerships with several international cookware brands, forming a reliable and globally integrated supply chain. Why Choose Us? 1. High Dimensional Accuracy Strict control over diameter and thickness tolerances ensures perfect compatibility with automated production lines, reducing tooling wear and material waste. 2. Superior Surface Quality Each circle features a smooth, oil-free, scratch-free surface for optimal non-stick coating adhesion (PFOA Free). 3. Consistent Internal Quality We maintain stable alloy grain structure and mechanical uniformity, reducing breakage or deformation during secondary processing. 4. Customization Options We provide tailor-made solutions according to specific cookware designs " including thickness, diameter, and alloy options (e.g., 3004)" to meet your individual needs. 5. Full Traceability and Certification All raw materials and production batches are traceable. We meet ISO and FDA standards, ensuring your finished cookware passes global compliance testing with ease. Packaging and Transportation Our packaging meets international export standards, ensuring safety and product integrity during shipping: Inner layer: Moisture-proof paper + protective film Outer layer: Wooden pallet with steel band reinforcement Approximate weight per pallet: 1000kg Multiple delivery options: Sea, Land, or Air freight

Minimum Order: 1 bags

Micronized wax is primarily used in plastic products to enhance processing properties and surface quality, with specific applications including lubrication, demoulding, and improved flow characteristics. Enhancing processing properties Micro-wax reduces the viscosity of plastic melts, improving flowability, shortening plasticisation time, and reducing equipment wear. Enhancing Surface Quality Adding micronized wax yields smoother plastic surfaces, minimises friction marks, and improves aesthetics. Polyethylene micro-wax, uniformly dispersed within the substrate, enhances gloss and scratch resistance. Specific Application Scenarios Injection Moulding/Extrusion: Improves flow properties of filler-blended compounds and resolves surface roughness issues. ‌ Demoulding: Reduces demoulding resistance, boosting production efficiency. ‌ Weather resistance: Certain micro-waxes can replace conventional wax powders, suitable for high-temperature processing environments.

Cty5 Ton Battery Electric Locomotive for Coal Mine Using the IGBT or AC frequency controller,stable starting and high traction effort, battery long life, locomotives' low center of gravity. 5 ton Battery locomotive Adhesive / total weight (t) 5 ton Track gauge (mm) 600.762.900 Traction (KN) 7.06 Cty5 Ton Battery Locomotive for Coal Mine with Factory Price Max. Traction (KN) 12.26 Speed(km/h) 7 Voltage (V) 250V Power (KW) 7.5 KWx2 Dimensions Length(mm) 3170 Width(mm) 920,1082or 1220 Height(mm) 1550 Wheelbase (mm) 850 Wheel diameter (mm) 520 Min Curve radius (m) 6 Controller Resistencia or IGB or VF controller Braking method Mechanical/Hydraulic brake FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarante the power of the locomotive. 1.Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. 2.After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. 3.Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock 4.Shipping method: Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 5.Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 6.After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded). b. Technical Support will be available in any time. c. Free replacement will provide once the failure confirmed caused by our product quality.

Minimum Order: 1 bags

LDTN pump is a vertical multi-stage barrel structure, with the suction and discharge ports located on the discharge seat. Suction and discharge ports can be adjusted at multiple angles such as 180 degrees and 90 degrees angle, and the impeller is closed. Pump inlet diameter is 80-400mm, the flow rate is 7-702m3/h, the head is 35-232m, the power is 3-630KW, and the voltage is 380V/6000V LDTN type condensate pump is suitable for transporting condensate water in the condenser of thermal (nuclear) power plants, and can also be used in chemical processes with restricted installation surfaces such as NPSH to transport water with physical and chemical properties similar to water, with a water temperature not exceeding 180 degrees. 200LDTN-125*5 200: suction diameter 200mm L: vertical D: multistage T: barrel type N: Condensate pump 125: Discharge diameter 125mm 5: Pump stage

Minimum Order: 1 bags