Offers to Sell

FZB fluorine plastic self-priming chemical pump The flow parts are all made of F46 fluorine plastic alloy, with strong corrosion resistance, tight and reliable sealing performance, high mechanical strength, no aging, no toxin decomposition, convenient maintenance etc. characteristics. The pump body is provided with a liquid suction chamber, liquid storage chamber, liquid return check chamber, gas-liquid separation chamber, reflux hole to have the performance of self-priming. The pump needs to be infused with liquid only for the first time before the pump starts. It does not need the infusion later again. The mechanical seal does not need to add cooling water for cooling, simple operation, safety and no leakage. It is the reliable pump to replace the submerged pump.

Minimum Order: 1 bags

Corrosion resistant self-priming pump VSP self-priming pump is composed of a pump body, pump cover, rotor assembly, and power component. The rotor assembly is installed in the pump cavity composed of the pump body and pump cover, and the power component drives the rotor assembly to rotate. Through the rotation of the rotor assembly in the pump cavity, the volume of the sealing chamber changes, quickly generating a vacuum degree to absorb materials. Characteristics of VSP strong self-priming pump VSP self-priming pump has super strong suction force and a wide range of liquid viscosity. It can be used with volatile solvents and high viscosity oil adhesives. Barreled and filled liquids can be pumped and sucked clean, with a suction cleanliness higher than that of vacuum units. Moreover, when a barrel of material is emptied and inserted into the next barrel, it can be sucked up in just one second. The self-priming time is extremely short, at 3 meters/2 seconds, while other self-priming pumps have a cavitation resistance performance of over 3 meters/180 seconds. And the structure is simple, with fewer components, easy installation, easy maintenance, and long service life. 1. Strong self-suction ability: unique and innovative structure, with a suction height of 8.2 meters. 2. Short self-priming time: 3 meters/2 seconds, 5 meters/8 seconds, 8 meters/15 seconds. 3. Wide pumping range: can pump volatile solvents to high viscosity liquids. 4. Strong anti cavitation performance: capable of pumping liquid from high vacuum containers. VSP Self-priming pump usage 1.Extraction and transportation of various low specific gravity and volatile solvent solutions. 2. Barreled liquid extraction and transportation, with light and clean suction (replacing bucket pumps and vacuum pump units) 3. Extract and absorb the residue inside the tank. 4. Extraction and cleaning of sludge at the bottom of the tank and tank. 5. Chemical industries such as agriculture, pharmaceuticals, and intermediates. 6. Extraction and transportation of high viscosity liquids in industries such as daily chemicals and oil products. 7. Brewery related industries such as beer and yellow rice wine. 8. Food related industries such as dairy and dairy products.

Minimum Order: 1 bags

Adds character to your outfit, especially if the rest of your look is neutral or monochrome. Ideal for those who want to stand out subtly

Minimum Order: 1 bags

Slip-on design makes them easy to wear and remove. Generally well-padded and flexible for all-day comfort

Minimum Order: 1 bags

Yellow Tassel loafers are a staple of sophisticated menswear. The red detail gives a unique, modern twist to a traditionally conservative design.

Minimum Order: 1 bags

Can be dressed up with tailored trousers or dressed down with chinos or dark jeans. Works for office wear, parties, weddings, and semi-formal events.

Minimum Order: 1 bags

Red accents add a bold, stylish flair that makes the slippers stand out without being over-the-top.

Minimum Order: 1 bags

The smartest heat press in the industry. The new Hotronix® Fusion heat presses feature a large high-resolution IQ™ control board with intelligent features such as troubleshooting and self-diagnostic capabilities. It allows useres to track performance and print productivitiy reports from anywhere with the new Hotronix Online Portal. The larger screen has improved touchscreen response where users can program an unlimited number of frequently used application settings. Also included are a production cycle counter, auto on/off settings and eight optional language settings. Threadability™ Threadability , ™ gives you the power to quickly and easily position garments on the lower platen, significantly increasing production speed. Simply position, press, then rotate to decorate any area on the garment — front, back or sides — without removing it from the platen. Save steps, save time. Designed for Fast Garment Loading and Unloading Exclusive patented design allows it to perform as both a swinger and a draw press to accommodate both user preference and space requirements. Our new EZ-On lower platen makes slipping on garments easy as child's play with no obstruction below the lower platen, saving time and money. Plus, get even more flexibility with interchangeable lower platens (sold separately). Switch out the lower platen without tools—just pull, twist the knob, then remove, it's that easy! Twin Timer™ The Sprint® Mag XS also features the new Twin Timer™ function which allows the user to program two independent time settings to count down any two-step process without resetting the timer. Interchangeable Lower Platens (Optional) You can print just about anything, in any location, on any item with the right size heat press platen. Stahls’ Hotronix® offers additional platen sizes for bags, sleeves, pant legs, and totes. It’s a Hotronix Like all Hotronix Heat Presses, this heavy duty machine has a cast-in tubular heating element every 5cm to ensure that there are no cold spots all housed in a high-quality die cast aluminum framework. Interchangeables lower platen sizes (Optional): 18cm diameter (Round) 15cm x 25cm 20cm x 25cm 40cm x 40cm 40cm x 40cm (Umbrella) 40cm x 50cm (Umbrella) Shoe Platen Leg / Sleeve Platen Technical Specifications: 110V or 220V / 1750W Runs on 220V All Stahls heat transfer presses shipped to the United Kingdom have an UK plug. Shipping Dimensions & Weight: 89cm L x 61cm W x 56cm H / 60kg Warranty: 30 years on heating element 5 years on framework 2 years on circuit board 1 years parts and labour Free technical support More Information Please Visit our website Official GAOLITO PRINTER Sdn Bhd for catalog, transaction, full Description, Term and Conditions, best product, or special price.

Minimum Order: 1 bags

This float sensor is suitable for Agfa :Anapurna M² printers. This is the original Agfa part (number D2+7621399-0002 replacing D2+2509129). This float sensor is 46.7cm long. More Information Please Visit our website Official GAOLITO PRINTER Sdn Bhd for catalog, transaction, full Description, Term and Conditions, best product, or special price.

Minimum Order: 1 bags

This Servo Micro BRU DDM-005X is suitable for EFI VUTEk UltraVu 3360 printers (1st generation). This is the original EFI VUTEk part (number P9116-A). More Information Please Visit our website Official GAOLITO PRINTER Sdn Bhd for catalog, transaction, full Description, Term and Conditions, best product, or special price.

Minimum Order: 1 bags

The Clearpath Robotics TurtleBot 4 Mobile Robot is the next-generation robotic platform for learning the Robot Operating System (ROS). With better sensors, more computing power and support for ROS 2, TurtleBot 4 is a fully-extensible reference platform for robotics researchers, developers and educators. The TurtleBot 4 is equipped with an iRobot® Create3 mobile base, a powerful Raspberry Pi 4 running ROS 2, 2D LiDAR and more. All components have been seamlessly integrated to deliver an out-of-the-box development and learning platform. It features an OAK-D-PRO 4K RGB autofocus camera. It comes with a top mounting plate, which makes it easy to integrate third-party hardware. Get Started Quickly The TurtleBot 4 is the ideal robotics development platform for your custom application. It ships fully assembled with ROS 2 pre-installed and configured along with detailed user documentation, an Ignition Gazebo simulation model, demo code and a suite of tutorials, allowing you to get started quickly with developing robotics applications. Sensor Packed TurtleBot 4 comes with an array of integrated sensors ideal for many robotics applications. Onboard sensors include the OAK-D spatial AI stereo camera, 2D Lidar, IMU, optical floor tracking sensor, wheel encoders, infrared, cliff, bump, slip detection and more. All onboard sensors are available as ROS topics via the network-connected ROS 2 API. Modern Mobility TurtleBot 4 is built on the iRobot Create 3 educational robot - a sturdy mobile base which provides an array of intelligent sensors for accurate localization and positioning, a 9kg payload capacity and a top speed of .306 m/s. The Create 3 has a standalone ROS interface and unlike previous TurtleBots, it includes integrated batteries and charging dock. Build & Expand Once you’ve mastered the basics, easily expand the capabilities of TurtleBot 4 by adding your own sensors and custom payloads. Accessible USB ports, power breakouts and a top mounting plate make it easy to integrate third-party hardware and components. With ROS 2 and its support for micro-ROS, expansion and integration of embedded microcontrollers is made easier than ever. Classroom Ready TurtleBot 4 comes with comprehensive courseware material, including lesson plans, lecture content, tutorials and sample tests, allowing educators to easily incorporate TurtleBot into robotics training courses. Support Open Source For every TurtleBot 4 shipped, a portion of the proceeds goes to the Open Source Robotics Foundation (OSRF) for the continued support of the development, distribution, and adoption of open source software in robotics research and education. More Information Please Visit our website Official GAOLITO PRINTER Sdn Bhd for catalog, transaction, full Description, Term and Conditions, best product, or special price.

Minimum Order: 1 bags

The Lynxmotion SES-V1 AL5D PLTW Robotic Arm (5 DoF) Assembled is especially made specifically for PLTW schools. The AL5D is a fully assembled robotic arm which features a medium duty wrist rotate upgrade, SSC-32U servo controller board and a USB cable. The SSC-32U board means no more USB-to-serial adapter and no more 9V battery. The Lynxmotion AL5D 4 Degrees of Freedom Robotic Arm delivers fast, accurate, and repeatable movement. Lynxmotion designed an affordable system based on a time tested, rock solid design that will last and last. The AL5D is made using Lynxmotion's Servo Erector Set components for the ultimate flexibility and expandability. The arm consists of black anodized aluminum brackets, aluminum tubing and hubs, custom injection molded components, and precision laser-cut Lexan components. Project Lead The Way (PLTW) is the nation's leading science, technology, engineering and math (STEM) solution and is used in over 5,000 schools across the U.S. The PLTW Computer Integrated Manufacturing (CIM) curriculum includes creating an assembly line and use of the Lynxmotion AL5D arm. This software was created so students would have full control of the arm without having to spend significant time programming, and integrate it easily into a larger manufacturing / assembly system. FlowArm PLTW (Download) has a powerful pattern sequencer component (normally found only in the full version of FlowBotics Studio) that is used to create reusable patterns within minutes or hours, instead of days or weeks. The sequencer also allows you to vary the speed of playback of a routine.

Minimum Order: 1 bags

This Steel Belt (A1) is suitable for Mutoh RJ-800 printers. This is a high quality generic belt that corresponds to Mutoh part number DE-49764A. This belt is 2713mm long and 15mm wide. Mutoh discontinued this product and the generic belt only is available. More Information Please Visit our website Official GAOLITO PRINTER Sdn Bhd for catalog, transaction, full Description, Term and Conditions, best product, or special price.

Minimum Order: 1 bags

This L-Bearing, Ssr15Xw2Ge+2320Ly(B) is suitable for Roland RA-640 printers. This is the original Roland part (number 1000009317). More Information Please Visit our website Official GAOLITO PRINTER for catalog, transaction, full Description, Term and Conditions, best product, or special price.

Minimum Order: 1 bags