Offers to Sell

广州德亚机械制造有限公司，国家高

Minimum Order: 1 bags

Xiongcai XC303 Motor Controller Provides Equivalent Performance to Stryker's Products Xiongcai has been focusing on motor controller for automotive fuel/water pump, RC car and medical devices since 2011, and focusing on motor controller only. We provide expertise and solution. In earlier October, one customer from Brazil, found us from internet. He sent an email trying to inquire about motor controller and find replacements to Stryker6/7/8 for his maintenance business on Stryker bone drills, especially the Stryker6/7/8, a lot of damaged bone drill were abandoned due to lack of replacement motor control, because he could find a ssupplier providing replacements. Actually we do have some types of motor control for bone drill application, providing equivalent performance. The customer said he bought some replacements before, but after he installed motor controller into bone drill, he found that some of the bone drill failed to work at its best and some of them does not work at all. We ask him to send us some pictures of components. After checking the PCB, we found that the triggers of bone drill and Hall sensors did not matched precisely. The distance of triggers are not the same with the distance between Hall sensors. In this case, the magnet installed on the triggers could not activate the Hall sensors, so the devices failed to work or failed to work at their best. We asked the customer to show us instruction, and check the installation dimensions. Then we recommended two types XCB302 and XC303 motor controller, which matched devices precisely. it's not sophisticated, but it need profession, not just technology, but also service. The customer said the previous supplier did not check the detail and just sold him products, and he wanted to bought several pieces each from us for test because he felt that we were responsible and professional. Three weeks later, customer came back to us and told us the motor controller had been installed perfectly and worked at their best. Xiongcai Technology investment into research and development enable the company to be at the leading edge of technological development, delivering excellent products to customers. Xiongcai motor controllers have been applying in top brands in automotive industries, such as Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Kesen, Unicent and more. We can put your RC car in extreme. Contact us and have a try. Visit http://en.xc-bldc.com or search Shenzhen Xiongcai Technology Co., Ltd, we will deliver efficient solution to you according to your ideas.

Xiongcai Motor Controller Approved By Chinese Greatest Auto Group-FAW Group. Founded by experienced engineer, XIONGCAI TECH is one of the few manufacturers that focus on motor controller (electronic speed control or ESC), especially in automotive fuel pump. Xiongcai launched a motor controller XCA105 which was engineered for automotive fuel pump. In 2017, Keshen Auto Parts, a company specialized in design and manufacture of automotive fuel pump, contacted us and inquired about motor controller for their products. The client was really picky and particular, their engineer team set a standard on protection measure beyond the industry because this product is designed for the greatest automobile group in China—FAW. . They said they had met several suppliers, some items of the standards were unacceptable, because if all items met this extremely high standard, the cost would exceed cost budget. Xiongcai team wanted to give a shot. Engineered from ground up, Xiongcai R&D team designed a combination of software and hardware meticulously called XCA105, making all parameters up to customer’s standard. After one year test and verification, Xiongcai XCA105 motor controller for water pump was approved. The client has introduced this product for 6 years till now. Xiongcai XCA105 Motor Controller For Water Pump provides protection measures including under voltage, over voltage, over current, low temperature, over temperature, plugging, reverse connection, short circuit, this means the motor controller may stop working due to some reason but never be damaged. We are one of the few engineering companies providing a full service from design to supply of product, which means we design, analyze, test and supply finished products. Xiongcai is serving top clients in auto industries, Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Keshen, Unicent and more. Contact us http://en.xc-bldc.com or search Shenzhen Xiongcai Technology for more. We try to assist you in achieving your ideas.

Minimum Order: 300

Protection Measures of E3 Motor Controller Keep Your RC Car Safe while Xiongcai has been focusing on motor controller for automotive fuel/water pump, RC car and medical devices for 12 years, and focusing on motor controller only. I know that our clients can search a lot of companies that manufacture motor controller, but you will find that most of them provide OEM only. We are one of the few motor controller suppliers providing a full service from design to supply of finished product. As an engineering oriented company, we provide solution according to customer’s application. For example, Xiongcai designed a high performance motor controller for RC car for a client. I believe most of manufacturer could make powerful motor controller, but the important thing is how to control the power and eliminate the negative impact. Xiongcai E3 motor controller is a high performance product designed for RC car for a notable brand. With 400A continuous current, 800A peak current, 6-12S Lipo cells, 16-54v high performance power system, how to control the monster? Xiongcai RD team designed perfect protection measures to protect the motor and keep it work at its best. Peak current limit. This measure will limit the peak current to avoid damage to motor; Single PWM periodical current detection limit reduce impact of pulse current to motor; Fans will be turned on or turned off automatically according to internal temperature; also when abnormal heavy current is detected, the motor controller will cut off power supply to fan, When a short-circuit takes place in fan, the test mode will start running. If the fan can’t be recovered in three times of test, the power to fan will be cut off, and the ESC is still working; Waterproof is designed for all weather condition, up to IP67. The ESC is potted in epoxy to protect the electronics and improve heat transfer, enabling motor controller working in any condition at a lower tempearture; And there are some more protection measures, including low voltage protection, throttle loss protection, abnormal braking protection, over-temperature protection etc. Xiongcai motor controllers have been applying in top brands in automotive industries, such as Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Kesen, Unicent and more. We can put your RC car in extreme. Have a try, we’ll deliver solution according to your ideas. Visit http://en.xc-bldc.com or search Shenzhe Xiongcai Technology for more.

Xiongcai Motor Controller Applied In Cummins Engine Since 2011, Xiongcai Technology has been a pioneering company in specialized field of motor controller for automotive Fuel Pump. Founded by experienced engineer, Xiongcai tends to be at the leading edge of technological development of motor controller for automotive fuel pump. Parts are imported by top brands in auto industry such as NISSAN, XPeng, FAW Group, FAWDE, Jingyi Group, Feilong Auto Parts, Shenhai Electrical Appliance, Huirun Electrical Machinery and more. In 2018, Joinhands Auto Parts, a company specialized in design and manufacture of automotive fuel pump, contacted us and inquired about motor controller for their products. The client was really picky and particular, their engineer team set a standard on protection measure beyond the industry because this product is designed for Wuhan Cummins, one of greatest engine manufacturers in China. They said they had met several suppliers, some items of the standards were unacceptable, because if all items met this extremely high standard, the cost would exceed budget. Xiongcai team wanted to give a shot. Engineered from ground up, Xiongcai R&D team designed a combination of software and hardware meticulously called XCA105, making all parameters up to customer’s standard. After one year test and verification, Xiongcai XCA105 motor controller for water pump was approved. The client has introduced this product for 6 years till now. Xiongcai XCA105 motor controller for fuel pump with 8A current, DC8-18v power system, working humidity 95% max, providing protection including under voltage, over voltage, over current, low temperature, over temperature, plugging, reverse connection, short circuit, this means the motor controller may stop working due to some reason but never be damaged. Certified by CSIPER25, ISO11452-2, ISO10605, ISO16750, ISO7637, XCA105 motor controller is a trusted product and Xiongcai is a trusted partner. We are one of the few engineering companies providing a full service from design to supply of product, which means we design, analyze, test and supply finished products. Xiongcai is partnering with top clients in auto industries, Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Keshen, Unicent and more. Contact us Shenzhen Xiongcai Technology Co., Ltd at http://en.xc-bldc.com for more. We try to assist you in achieving your idea.

Minimum Order: 300

Description Wall mount HVAC transmitter AM6108B is a 5-in-1 built-in IAQ sensor with Modbus or BACnet. It can send control signal and deliver real-time indoor air quality data including particulate matter(PM1.0,PM2.5,PM10), carbon dioxide(CO2), VOC, temperature and humidity to building automation system, fan and valve can be adjusted accordingly, to keep indoor air quality at a comfortable level. Meanwhile, it also supports wireless data transmission via Wi-Fi, to realize online air quality monitoring. Features - Modbus /BACnet protocol for choice - IoT wireless monitoring is available - HVAC system control function: Three levels of wind speed can be adjusted; Four working modes: intelligent, manual, mute, and time - Low power consumption - Standard configuration: CO2,PM,RH&T,VOC (Optional) - Compatible with touch-screen operation, device ID and baud rate can be set via surface - OEM/ODM is available(sensor configuration, appearance design, PCBA design, software development etc.) Specifications - Operating principle: CO2: non-dispersion infrared (NDIR);PM: Light scattering - Measurement range:CO2: 0~5000ppm; PM2.5: 0~999μg/m³ - Temperature: -10°C~50°C; Relative Humidity: 0%~95%RH - CO2 accuracy:±(50ppm+5% of reading) /±(30ppm+3% of reading) is optional - PM accuracy:PM2.5: 0~100μg/m³, ±10μg/m³; >100μg/m³, ±10% of reading (25°C±2°C, 50±10%RH) - Temperature Accuracy:±1°C(0°C ~50°C) - Humidity Accuracy:±8%(0%~95%RH) - UI Screen:Touch Screen - Output:Modbus-RTU or BACnet-MSTP or Wi-Fi - Power supply:12VDC~24VDC - Working Condition:-10°C~50°C,0~95%RH(non-condensing) , - Storage condition:-20℃~60℃,0~95%RH(non-condensing) , - Dimension:W86*H86*D25(mm)

Minimum Order: 1 bags

Disposable Underpad for Bed Product Details: 1.Diamond shaped embossing, shunt design, guiding urine to penetrate downwards. 2.Polymer absorbent, fast absorption without backosmosis. 3.Hot press edge sealing around, widened for protection. 4.PE leak proof bottom film to prevent penetration. Product Specification: Product name heavily absorbent waterproof extra large premium disposable underpad for bed Main Ingredient Non-woven fabric Function Super Absorbent Style Mesh Lead time 30-35 days Package 10 pieces/bag

Minimum Order: 5000

Description Air quality monitor AM7000 is OEM based intelligent desktop indoor air quality monitor with fashionable and compact design. It could integrate high quality air quality sensor module, which can monitor indoor air quality and output real-time data of PM2.5,CO2, HCHO, VOC, RH&T, etc. AM7000 can also realize smart detection and monitoring of the AM7000 real time PM2.5, CO2, VOC ,Rh&T, and HCHO measurement anywhere on smartphone APP. Features - Smart Wifi Device with APP & Cloud support - Accurate and reliable measurement - Convenient calibration - Real-time output PM,CO2,RH&T (VOC,HCHO optional) - Desktop monitor, USB power supply - OEM/ODM is available (sensor configuration, appearance design, PCBA design,software development etc.) Specifications - Operating principle:CO2: non-dispersion infrared (NDIR); PM: Light scattering,HCHO/VOC: Electrochemical - Measurement range:CO2: 400~5000ppm; PM2.5: 0~999μg/m³;Temperature:-10°C~50°C; Relative Humidity: 0%~95%RH;Formaldehyde：0~1.000mg/m3，VOC：0 , -3level - CO2 accuracy:±(50ppm+5% of reading) /±(30ppm+3% of reading) is optional PM accuracy:PM2.5: 0~100μg/m³, ±10μg/m³; >100μg/m³, ±10% of reading (Refer to TSI 8530 25°C±2°C, 50±10%RH) - Temperature Accuracy:±1°C(0°C ~50°C) - Humidity Accuracy:±8%(0%~95%RH) - Formaldehyde Accuracy:<=0.100mg/m3：±0.03mg/m3;＞0.100mg /m3：±30% of read - VOC Accuracy:No accuracy definition - UI Screen:Screen - Output:WiFI & Bluetooth - Power supply:DC 5V - Working Condition:-10°C~50°C,0~95%RH(non-condensing) , - Storage condition:-20℃~60℃,0~95%RH(non-condensing) , - Dimension:W90*H85*D53(mm)

Minimum Order: 1 bags

Xiongcai Motor Controller Is Introduced By The Largest Auto Fuel Pump Manufacturer Xiongcai Technology tends to be at the leading edge of technological development of motor controller for automotive Fuel Pump. We are one of the few manufacturers that focus on motor controller (electronic speed control or ESC) only, especially for automotive fuel pump. In 2017, ACHR Electrical Machinery, a company specialized in design and manufacture of automotive fuel pump. They contacted us and inquired about motor controller for their products. The client was really picky and particular, their engineer team set a standard on protection measure beyond the industry because this product is designed for the greatest automobile engine group in China—FAWDE. They said they had met several suppliers, some items of the standards were unacceptable, because if all items met this extremely high standard, the cost would exceed budget. Xiongcai team wanted to give a shot. Xiongcai R&D team designed a combination of software and hardware meticulously called XCA105, making all parameters up to customer’s standard. After one year test and verification, Xiongcai XCA105 motor controller for fuel pump was approved. The client has introduced this product for 6 years till now. Xiongcai RD team designed perfect protection measures to protect the motor. Peak current limit. This measure will limit the peak current to avoid damage to motor; Single PWM periodical current detection limit reduces impact of pulse current to motor; Waterproof is designed for all weather condition, up to IP67. The ESC is potted in epoxy to protect the electronics and improve heat transfer, enabling motor controller working in any condition at a lower temperature; And more protection measures including under voltage, over voltage, over current, low temperature, over temperature, plugging, reverse connection, short circuit protection. Furthermore, XCA105 motor controller was certified by CSIPER25, ISO11452-2, ISO10605, ISO16750, ISO7637. We are one of the few engineering companies providing a full service from design to supply of product, including design, analyze, test and supply finished products. Xiongcai is serving top clients in auto industries, ACHR, Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Keshen, Unicent and more. Contact us Shenzhen Xiongcai Technology Co., Ltd for more. We try to assist you in achieving your idea.

Minimum Order: 300

Xiongcai XC303 motor controller (ESC) is engineered for medical bone drill. The Xiongcai XC303 electronic speed control (ESC, motor controller) is packed with a potent combination of hardware and software advancements. This product is designed for MECIAL DEVICE SUCH AS BONE DRILL, GRINDER, PEDAL TYPES. The power system will push your vehicles to their limit and beyond. In April, a client from Brazil sent us a message, inquiring about motor controller for Stryker bone drill. He said he was running the maintenance business for several notable brands, and seeking for partner in providing motor controller. In the past years, too many damaged Stryker bone drill have been abandoned due to lack of repair and short of motor controller. He saw our motor controller XC303 on internet, and found that the performance of our parts were similar with original Stryker7. Whether we can sent him samples for test. We show him the detail of our products, especially the installation dimensions and operation rules between triggers and Hall sensors. The samples were charged but we promised that expense would be refunded in mass production. This client order 3 pcs for single trigger and dual trigger each. Three week later, client came back to us and told us thebone drill were working well, XC303 motor controller matched Stryker7 exactly, and working as excellent as original products. Xiongcai XC303 motor controller is powerful, for the safety, Xiongcai team designed excellent protection measures. Low voltage and over voltage protection. The ESC will monitor batteries all the time, once the voltage is lower than preset value, the power will be reduced immediately and be cut off in a few seconds. BEC voltage is optional, up to your servo spec. Thermal management is meticulously designed. With the integration of a forged Al heatsink, the design maximizes the airflow throughout the system and cool down critical components, keeping your vehicle working at optimal condition. Xiongcai XC302 ESC will promote the performance to a new level. Xiongcai is serving top clients in multitude of industries, such as automotive fuel pump, water pump, medical devices, electrical tool, we are partnering with top clients in their lines, ACHR, Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Keshen, Unicent and more. Our team is capable of excellent RD ability, if you have any special requirements on your motor control, we will help you achieve your ideals. Contact us and have a try. visite http://en.xc-bldc.com, we are ready to put your device in its best.

Minimum Order: 300

Xiongcai E8 Electronic Speed Controller Makes Your RC Cars & Trucks More Competitive Focusing on electronic speed controller design and manufacture, Xiongcai is a company that pursue the excellence relentlessly. The company has developed a series of ESCs for RC hobby products, E8 is one of them designed for 1:10th RC cars and trucks. Power With 160A cont. current, 6s Li-Po power system, the E8 electronic speed controller can deal with anything the motor pours out. Built-in DCDC conversion circuit provides potent capacity for BEC. Powerful BEC output is adjustable 6v, 7.4v, 8.4v and 6A continuous current, 15A peak. This product is packed with an integration of excellent hardware, original creative software and sensorless mode for high performance power system. Tough Design and Thermal Performance Thermal management is important to a powerful electronic device. With integration of forged Al heatsink, case and a 40mm fin fan, E8 electronic speed controller allows airflow maximum throughout entire component, taking thermal performance to next level for cooler ESC, longer runtime and high-performance. The fan will be turned on or off by ESC according to internal temperature of system. Bluetooth Communication A mobile application is designed meticulously for DIY configuration. Most of parameters related to performance you can set according to your skill level, including running mode, acceleration, braking force, turbo timing, and so on. Something you can’t experience in reality, but you can feel them with your RC cars or trucks instead. For example, we set 12 levels of acceleration, the quick start and launch control will ignite your passion and get you excited. Protection We have power, also we have protection measure for safety. A multi-protection measures include low voltage, throttle loss, abnormal braking, over- temperature, short circuit, and more. Especially, we designed two original creative technological application: active freewheeling and wave-by-wave current limiting. The active freewheeling identification technology achieves microsecond track and response, reducing MOS generating heat dramatically. The wave-by-wave current limiting will control the peak of each wave of current to protect motor and drivetrain, prolonging service life of power system. E8 electronic speed controller is ultra-powerful, but easy to handle, what you need to do is enjoying the drive, we take care of the rest. There are 6 ESCs in this product family, including 140A to 400A to meet enthusiasts’ diverse demands. Xiongcai electronic speed controllers will supplement your portfolio and make your RC cars more competitive in power and price.

Minimum Order: 300

Xiongcai E3 Motor Speed Controller Integrates High-performance and Safety To Promote Handling Experience of RC Car When you drive your RC cars, what comes to mind must be power, speed or something else rather than protective measures. Maybe the RC car manufacturers might think about this, but we care about it. We have been engaging in motor speed controller since 2011, what we focused on is driving motor more efficiently, more reliably and more safely. When we engineered E3-a powerful motor speed controller, we kept this thought in mind. E3 motor speed controller was engineered according to a client’s concept. This client is one of the largest RC hobby products suppliers, running RC cars, boats, planes etc. they wanted to design a powerful BLDC brushless motor speed controller for 1:6th scale vehicle. The client said according to their experience, many enthusiasts would have a problem that the high power would damage motor or motor speed controller. We needed to balance high performance and safe. This was exactly what we were good at. Engineered from the ground up, a potent integration of hardware and unique software that will redefine handling experience of RC cars. With power system 400A continuous current, 800A peak, 6-12S Li-po batteries, the ESC will put your RC car in its extreme. A built-in DCDC conversion circuit provides potent loading capacity for BEC with options 6.0V, 7.4V, 8.4V and output 10A continuous current, 25A peak. You can choose proper power according to your servo performance. The Al forged case integrates a 40mm fin and heatsink allows airflow throughout the package, promoting thermal performance to a new level. Fan will be turned on or off by motor speed controller according to internal temperature of system. We have designed perfect protection measures while endowing E3 motor speed controller with high performance, including under voltage, throttle loss, abnormal braking, over temperature, abnormal Hall sensing, short circuit and more, especially the active freewheeling and wave-by wave current limiting. The unique application of active freewheeling identification technology provides microsecond track and response time, minimizing MOS heating. Wave-by wave current limiting will protect motor and transmission mechanism, prolonging service life of power system. Xiongcai E3 motor speed controller is an efficient system designed for enthusiasts’ RC cars, putting them in extreme and running at their best.

Minimum Order: 300

300A 14S Motor Speed Controller for Water Sports Surfboard RC Boats In the last years, XC technology has released 6 electronic speed controllers (ESC, motor controller) for RC cars and RC trucks and earned a place in this field. This year, we release a new product-motor controller for water sports, such as surfboard, thruster or sea scooter and RC boats, letting you enjoy the fun of surfing even in calm lakes. 1. Current: Continuous current 300A 2. Output: 6-14s Li-Po 3. Motor: BLDC Sensored or sensorless brushless motor 4. Speed: <240,000RPM 5. BEC: 6.0V, 7.4V, 8.4V, continuous current 10A, peak 25A 6. Bluetooth Communication: Parameter setting, firmware upgrade 7. Mobile App: for quick programming, no need of additional modules 8. Compatible with any RC motors 9. Dimension: 127.5*81.0*52.5mm For water sports, the power of motor controller could be higher than that on surface. Especially for surfboard, XC technology designs a power system of 300A current, 6-14S to evoke your passion. It will redefine the limit of water sports. With advancement work of hardware and software, W300 motor controller can increases performance dramatically and reduce heat. The CNC machined Al alloy case integrates water cooling system will make thermal dissipation effectively. The optimal software will reduce the time components spend generating heat, remaining motor controller cool while running at top performance. W300 motor controller takes thermal performance to a new level. Unique technologies have been applied for safety and reliability. The active freewheeling can achieve microsecond level on track and response to reduce MOS generating heat. Wave-by-wave current limiting will control the peak current (peak current doesn’t do any good), protect motor and drivetrain, prolonging service life of power system. Mobile App can be used to program parameters, update firmware and observe motor controller data (records and real-time data). No need of additional programming box or card. Built-in Bluetooth connects to Mobile App directly for parameter setting, firmware updates. No need of additional Bluetooth module. 10A cont. current, 6.4v-7.4-8v adjustable BEC suits different servos and provides quick response to servo signal (the greater the current, the faster the response). Besides high-performance, a full protection is designed to protect you and your beloved devices, including low voltage, throttle loss, abnormal braking, over temperature etc. We try our best to improve reliability of motor controller because we care about the safety of users and their device like we care about that of ourselves. Current detection liming in single PWM cycle. It can reduce impact of pulse current on motor. W300 motor controller can process current control 20,000 time per second, keeping response in time as well as no need to be shut down. Turbo timing can unleash potential power of motor. actually, most of motor controllers have this function, but the problem is these motor controllers need to pair with specific motors. XC technology makes a change. W300 motor controller can perform turbo timing on any motor, let you feel fast and furious. Furthermore, XC W300 has the function of data return. Users can view the real- time data of motor controller such as voltage, current, temperature and motor RPM etc. Typically, additional module and wire are required to achieve this function, which is fussy and costly. We are always trying to make motor controller reliable, cost-effective and easy-to-use, and we have made it. Contact us for detail and have a try, you will feel something different.

Minimum Order: 100

XC700 DC 96V Motor Controller for Solar Pumping System XC700 motor controller is mature product designed for solar pumping system. This product was released several years ago, the performance and reliability had been verified and approved by clients and market, it’s one of the best sellers in XC motor control product family. Demand on solar pump controller could be diverse, we provide bespoke service for customers. If you have any specific requirement, we help you achieve it. This motor controller for solar pump comes with characteristics: Specification: Model: XC700-SP-96V-1300w Working Voltage: DC24-150V Rated Voltage: 96V Rated Current: 13.5A Working Temp: -30-85℃ Humidity: 95% Max Dimension: 115*96*39mm (PCBA), 144*170*61mm (set) Protection: Antiflood protection, water lack protection, undervoltage protection, overcurrent short circuit protection, over-temperature protection, motor stall protection and reverse, polarity protection Start/stop and speed control Suitable for applications powered by solar panels, MPPT algorithm inside XC Motor Control has been specializing in motor control since2011, we have considerable expertise in enhancing motor control. The potent combination of hardware and advanced software can keep your device working at its best. Have a try, you are worth a better solution.