Offers to Sell

Part Number: TST28011T-00 Display Mode: TFT LCD Resolution: 240*320 Manufacturer: China Interface Type: MCU interface Warranty: 1 year Operating Temperature: -20℃~70℃ Storage Temperature: -30℃~80℃

Minimum Order: 2 barrels

Part Number: TST028QVHS-15P Display Mode: TFT LCD Resolution: 240*320 Manufacturer: China Interface Type: SPI interface Warranty: 1 year Operating Temperature: -20℃~70℃ Storage Temperature: -30℃~80℃

Minimum Order: 2 barrels

Casun Nema 14 0.3A Stepper Motor 6V DC Stepper Motor 36*12.5mm for Video conference machine High Torque Casun 0.3A NEMA 14 Stepper Motor 12.5mm 6V DC Stepper Motor 36*12.5mm 0.3A 2 Phase Bipolar Hybrid 6V DC NEMA 14 Thin Stepper Motor The 35mm Hybrid Stepper Motor Series offers powerful holding torque in a variety of sizes. Use with a microstepping driver to reduce vibration and achieve higher step resolution. Choose a baseline version or request your own customized configuration. Features: Bipolar or unipolar versions available Hybrid stepper construction Available in single or double shaft versions CE and RoHS approved Customizations on request Appearance Casun 0.3A Nema 14 Stepper Motor 6V DC For Video Conference Machine 0 Dimensions Casun 0.3A Nema 14 Stepper Motor 6V DC For Video Conference Machine 1 Motor Specifications Step Angel 1.8 ° Fram Size 12.5 mm Number of Phase 2 Phase Rated Current 0.3A Holding Torque 22 mN.m Resistance 20 ohm Inductance 6.8 mH Rotor Inertia 4 g-cm² Motor weight 0.06 kg Number of leads 4 Connection Bipolar Torque Curves Download If our standard motor cannot meet your needs, we can customize the motor according to your needs Customized content includes but is not limited to special shafts, winding parameters, installation dimensions, lead wires with special requirements, connectors, etc. FAQ 1. who are we? We are based in Guangdong, China, start from 2011,sell to Domestic Market(63.00%),Western Europe(12.00%),North America(9.00%),Eastern Asia(8.00%),Northern Europe(2.00%),Eastern Europe(00.00%),Southeast Asia(00.00%),Oceania(00.00%),Mid East(00.00%),Southern Europe(00.00%),South Asia(00.00%). There are total about 51-100 people in our office. 2. how can we guarantee quality? Always a pre-production sample before mass production; Always final Inspection before shipment; 3.what can you buy from us? Stepper Motor,BLDC Motor 4. why should you buy from us not from other suppliers? We are specialized in producing and selling stepper motors for more than 11 years. 5. what services can we provide? Accepted Delivery Terms: FOB,CFR,CIF,EXW,Express Delivery； Accepted Payment Currency:USD,CNY; Accepted Payment Type: T/T,L/C,D/P D/A,,PayPal; Language Spoken:English,Chinese,Japanese Options: Encoder Brake Gearbox Shaft Casun 0.3A Nema 14 Stepper Motor 6V DC For Video Conference Machine 2 Casun 0.3A Nema 14 Stepper Motor 6V DC For Video Conference Machine 3 Casun 0.3A Nema 14 Stepper Motor 6V DC For Video Conference Machine 4 Casun 0.3A Nema 14 Stepper Motor 6V DC For Video Conference Machine 5

Automobile assembly line According to customer needs, we can develop and design fully automatic or semi- automatic non-standard special assembly equipment for the whole vehicle manufacturing process, so as to reduce employees, improve cycle time, and improve product consistency. It can not only save costs for production enterprises, but also improve efficiency and product quality. Automobile assembly is the last link of all the manufacturing processes of the whole vehicle, and it is also a relatively important link. It is the process of combining thousands of parts that have been inspected and tested according to the specified precision standards and related technical requirements into some large and small assemblies, and then assembling these assemblies into automobiles. In this process, each procedure must be strictly tested to ensure that it is qualified. The advantage of a car, in addition to relying on advanced product design and well-manufactured parts, is also indispensable to a good assembly process. The assembly production organization, production line, equipment, detection means, assembly automation degree, etc. will all be important topics in the research of automobile manufacturing. There are many kinds of parts in automobile assembly, the quantity is large, and the operation is relatively complicated. In addition to large systems such as engine, transmission system, suspension, body, steering system, and brake system, interior parts, electrical appliances, wiring harnesses, software, etc. must also be assembled. tube, glass etc. The content includes interference fit, welding, riveting, inlay, screw connection, etc. Therefore, the workload is still very large (generally accounting for about a quarter of the entire automobile manufacturing workload). Generally speaking, the automobile assembly process mainly includes the following major assembly lines: engine assembly line, door subassembly line, instrument panel subassembly line, interior decoration subassembly line and rear axle subassembly line, and which final assembly line is thickened and the final Test line. The final assembly line is composed of interior decoration line, chassis line, exterior decoration line, door line, inspection line, rain line, etc. The following is a detailed introduction of the automobile final assembly line: Assembly interior line: Assembly chassis line Assembly door line Automobile Assembly Line Automotive EPC 0

OEM/ODM services Exporting to Europe and the South America MOQ of 10Tons Over 20 years' experience in exporting various offorging/rolling grinding steel balls, mill steel rods and cylinders... Specialized in Precision Casting and Forging Ball Grinding Media Fields Suizhou Gaincin Machinery Co.,Ltd(info#GAINCIN.com.cn) has and insists on its own marketing philosophy from production to sales, stable quality and best quality service, mutual benefit with customers. In order to meet various sizes of forging steel grinding media balls, skew rolling steel grinding media balls, casting alloy chromium steel balls with Cr contents range dia.8mm to 150mm,sections,cylinder field development request, we constantly explore and innovate, making our product with the higher quality and diversification to meet the different customer`s request from all over the world. Meeting ISO Standard and SGS All of our grinding steel balls are processed according to the standards of ISO 9001:2008, and our balls conform to the requirements of SGS and RoHS. Work with Us Today Immediately! We sincerely say thanks for our customer, because of your support, we become more professional. Grinding Media Ball is the most common in the world and also the most fascinating, although sometimes we cannot absolute get super-hardness balls, we are still making great efforts to explore and approach it. Gaincin Machinery is an energetic team and we are expecting your cooperation. Contact us today. Suizhou Gaincin Machinery Co.,Ltd 1704,Jingxiu River,Zengdu,Suizhou,Hubei,China info@gaincin.c , om.cn kimy.lee@gaincin.com.cn Tel.fax: 86 0722 358 8806 Showrom: gaincin.store.bossgoo.com

Minimum Order: 10 long tons

OEM/ODM services Exporting to Europe and the South America MOQ of 10Tons Over 20 years' experience in exporting various offorging/rolling grinding steel balls, mill steel rods and cylinders... Specialized in Precision Casting and Forging Ball Grinding Media Fields Suizhou Gaincin Machinery Co.,Ltd(info#GAINCIN.com.cn) has and insists on its own marketing philosophy from production to sales, stable quality and best quality service, mutual benefit with customers. In order to meet various sizes of forging steel grinding media balls, skew rolling steel grinding media balls, casting alloy chromium steel balls with Cr contents range dia.8mm to 150mm,sections,cylinder field development request, we constantly explore and innovate, making our product with the higher quality and diversification to meet the different customer`s request from all over the world. Meeting ISO Standard and SGS All of our grinding steel balls are processed according to the standards of ISO 9001:2008, and our balls conform to the requirements of SGS and RoHS. Work with Us Today Immediately! We sincerely say thanks for our customer, because of your support, we become more professional. Grinding Media Ball is the most common in the world and also the most fascinating, although sometimes we cannot absolute get super-hardness balls, we are still making great efforts to explore and approach it. Gaincin Machinery is an energetic team and we are expecting your cooperation. Contact us today. Suizhou Gaincin Machinery Co.,Ltd 1704,Jingxiu River,Zengdu,Suizhou,Hubei,China info@gaincin.c , om.cn kimy.lee@gaincin.com.cn Tel.fax: 86 0722 358 8806 Showrom: gaincin.store.bossgoo.com

Minimum Order: 10 long tons

OEM/ODM services Exporting to Europe and the South America MOQ of 10Tons Over 20 years' experience in exporting various offorging/rolling grinding steel balls, mill steel rods and cylinders... Specialized in Precision Casting and Forging Ball Grinding Media Fields Suizhou Gaincin Machinery Co.,Ltd(info#GAINCIN.com.cn) has and insists on its own marketing philosophy from production to sales, stable quality and best quality service, mutual benefit with customers. In order to meet various sizes of forging steel grinding media balls, skew rolling steel grinding media balls, casting alloy chromium steel balls with Cr contents range dia.8mm to 150mm,sections,cylinder field development request, we constantly explore and innovate, making our product with the higher quality and diversification to meet the different customer`s request from all over the world. Meeting ISO Standard and SGS All of our grinding steel balls are processed according to the standards of ISO 9001:2008, and our balls conform to the requirements of SGS and RoHS. Work with Us Today Immediately! We sincerely say thanks for our customer, because of your support, we become more professional. Grinding Media Ball is the most common in the world and also the most fascinating, although sometimes we cannot absolute get super-hardness balls, we are still making great efforts to explore and approach it. Gaincin Machinery is an energetic team and we are expecting your cooperation. Contact us today. Suizhou Gaincin Machinery Co.,Ltd 1704,Jingxiu River,Zengdu,Suizhou,Hubei,China info@gaincin.c , om.cn kimy.lee@gaincin.com.cn Tel.fax: 86 0722 358 8806 Showrom: gaincin.store.bossgoo.com

Minimum Order: 10 long tons

NT CAT T CAS:2212-32-0 Analysis and Precautions Introduction. CAS No.:2212-32-0 Molecular Formula: (CH3)2NCH2CH2N(CH3)CH2CH2OH Molecular weight: 146.23 Chinese name: 2-{[2-(dimethylamino)ethyl]methylamino}ethanol , English name: 2-{[2-(Dimethylamino)ethyl]methylamino}ethanol , English alias: 2-{[2-(Dimethylamino)ethyl]methylamino}ethanol , Precise molecular weight/precise mass: 146.23 Molecular structure. 1、 Molar refractive index: 43.45 2. Molar volume (m3/mol): 156.0 3、 Isotropic specific volume (90.2K): 378.7 4、 Surface tension (dyne/cm): 34.6 5、 Dielectric constant (F/m): not available 6、 Dipole distance (D): not available 7、 Polarization rate (10 -24cm 3): 17.22 Oil-water partition coefficient / LogP. LogP value refers to the logarithmic value of the partition coefficient of a substance in the n-octanol/water two-phase system, reflecting the partition of the substance in the oil-water two-phase. The larger the LogP value, the more lipophilic the substance is; conversely, the smaller the LogP value, the more hydrophilic the substance is. Product use. Trimethylhydroxyethyl ethylenediamine is a low odor reactive foaming catalyst. Trimethylhydroxyethyl ethylene diamine is mainly used as a catalyst for polyether-based polyurethane flexible foam, molded foam, semi-rigid foam and rigid foam, and is especially recommended for automotive foam. Applications. 2-{[2-(dimethylamino , )ethyl]methylamino}ethanol (dmemH) has been used for the preparation of new iron clusters: [Fe7O4 (O2CPh) 11 (dmem) 2] [Fe7O4 (O2CMe) 11 (dmem) 2] [Fe6O2 (OH) 4 (O2CBut) 8 (dmem) 2] Conditions to be avoided. Heat, flame and sparks. Incompatible substances. Strong oxidizing agent, strong acid Waste disposal methods: This explosive product can be burned in a chemical incinerator with post- combustion treatment and scrubbing action Dispose of the remaining and non-recyclable solution to a licensed company. Contact a licensed professional waste disposal facility to dispose of the substance. Contaminated containers and packaging Dispose of as unused product. Safety Information. Hazardous Transport Code: Not available Hazardous Material Marking: Irritant Safety Marking: S26 Hazardous Marking: R36/37/38 Description of necessary first aid measures. Consult a physician for general advice. Show this safety technical note to the physician who arrives at the scene. Inhalation If inhaled, move patient to fresh air. If breathing stops, perform artificial respiration. Consult a physician. Skin contact Flush with soap and plenty of water. Consult a physician. Eye contact Flush thoroughly with plenty of water for at least 15 minutes and consult a physician. Ingestion Do not induce vomiting. Do not give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. Storage and transportation. Should be kept sealed and stored in a dry, cool and ventilated warehouse Packaging. 200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. Please fasten the lid of the package as soon as possible after the original packaging to prevent the mixing of other substances such as moisture from affecting the performance of the product. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits. https://www.newtopchem.com/archives , /40573

Minimum Order: 100

NT CAT PC-8 CAS No.:98-94-2 Synthesis method and application Brief introduction. Chemical Chinese name: N,N-dimethylcyclohexylamine Chemical English name: N,N-dimethylcyclohexylamine; dimethyl aminocy clohexane Chemical Alias: Dimethyl aminocyclohexane CAS No.: 98-94-2 EC No.: 202-715-5 Molecular formula: C8H17N Synthesis method. N,N-dimethylaniline catalytic chlorination method In 1904, Sabatier et al. carried out the gas-phase hydrogenation of N,N a dimethylamine at a temperature of 160-180°C and at atmospheric pressure to produce DMCHA. Phenol method This method uses Pd or Rh as the catalyst, and phenol dimethylamine and hydrogen as raw materials. For example, when Pd is the catalyst, the catalyst dosage is 0.2~0.5, and the process conditions are 60~150℃, hydrogen pressure 0.15~0.48MPa, reaction time 6h, and the yield is between 70~80%. The raw material is available, and the reaction conditions are mild, but the catalyst is made of precious metals, and the yield is low. Cyclohexylamine method The process also uses formaldehyde and formic acid to react with cyclohexylamine, or uses oxides of Bi, Sb, Mg, A1, Lu, etc. as catalysts to react cyclohexylamine with methanol to methylate cyclohexylamine to produce DMCHA. the disadvantage of this method is the low selectivity of the former reaction, and the yield of the later methylation is not high. Cyclohexanone method Among the methods for the synthesis of DMCHA, the reductive amination method using cyclohexanone as raw material has more advantages: high conversion, yield and selectivity. The processes using Pd/C catalyst or Cu-A1 catalyst have their own characteristics and are currently under development in China. Uses. [Use I] Mainly used as polyurethane hard foam catalyst [Use II] N,N-dimethylcyclohexylamine can be used in a wide range of rigid foams. N,N-Dimethylcyclohexylamine is also suitable for the manufacture of rigid foam furniture frames and decorative parts. It can be used as the main catalyst alone in rigid foam products without the addition of organotin, or it can be supplemented with JD series catalysts according to the process and product requirements. It is also used as intermediate of rubber accelerator and synthetic fiber. Use III】It is used as intermediate of dyestuff, used to make vanillin, azo dyestuff, triphenylmethane dyestuff, also can be used as solvent, stabilizer, analysis reagent, etc.. Also used as catalyst. Storage and transportation. Should be sealed and stored in a dry, cool and ventilated warehouse Package: 200KG/drum 200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits. https://www.newtopchem.com/archives/404 , 58

Minimum Order: 100

NT CAT PC-5 CAS No.: 3030-47-5 Product Application Brief introduction. Chemical name: N,N,N′,N′,N″-Pentamethyldiethylenetriamine Alias: Pentamethyldiethylenetriamine Abbreviation: PMDETA English name: N,N,N′,N′,N″-pentamethyldiethylenetriamine Molecular formula: C9H23N3 Relative molecular mass 173.3 CAS No. 3030-47-5 Applications. Pentamethyldieth , ylenetriamine (PMDETA) is a highly active tertiary amine foaming catalyst, PMDETA has a strong foaming effect, which can improve the flow of foam and enhance the quality of products.PMDETA can also be used as a ligand for polyurethane foam catalysts and a ligand for functional polymerization materials. In addition, other applications are exemplified as follows. 1. Preparation of a two-phase amine absorber for capturing CO2. The two-phase amine absorber is a three-component system consisting of diethylenetriamine, pentamethylenetriamine, and water, and the total concentration of diethylenetriamine and pentamethylenetriamine in water is 4~5 mol/L, and the molar ratio of diethylenetriamine to pentamethylenetriamine is 1:4~4:1; these two organic amines alone do not have the ability to split the phase after absorbing CO2 in aqueous solution, but the two-phase amine absorber composed of the three-phase system But the two-phase amine absorber composed of this ternary system has the performance of phase separation, which is a homogeneous solution before absorbing CO2, and is divided into two phases after absorbing CO2 saturation. After saturated absorption, CO2 is enriched in the aqueous phase, and after phase separation, only the solution enriched in the CO2 phase needs to be regenerated thermally, thus greatly reducing the amount of enriched liquid required for regeneration, effectively reducing regeneration energy consumption, and also maintaining efficient CO2 absorption performance, which has a wide range of application prospects. 2. A methanol gasoline power accelerator. The accelerator consists of: isooctanol, aminoacetaldehyde diethyl acetal, 1,5- cyclooctadiene, 2-acetylbenzofuran, propargyl alcohol, n-propanol, zinc naphthenate, dinonyl naphthalene sulfonic acid, dipolyoxyvinyl aliphatic amine, and pentamethyldiethylenetriamine. The preparation method includes: a. Add isooctanol, aminoacetaldehyde diethyl acetal, 1,5-cyclooctadiene, 2- acetylbenzofuran to the reaction kettle and stir the reaction for 40-50 minutes at 60-62°C with closed ultrasonic stirring, b. Mix n-propanol, zinc naphthenate, dinonyl naphthalenesulfonic acid and stir for 15-25 minutes; c. Add propargyl alcohol, the mixture in step b, dipolyoxyvinyl fatty amine, pentamethyl diethylenetriamine, add them to the mixture in step a in turn, stir for 20~25 minutes at 33~35℃, and then cool down to obtain. Quality index. Content: ≥98% Specific gravity: 0.8330-0.8410 Refractive index: 1.4430-1.4450 Storage and transportation. Should be sealed and stored in a dry, cool and ventilated warehouse Packing. 200KG/drum Storage: It is recommended to be stored in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after the original packaging to prevent the mixing of other substances such as water and other substances from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits. https://www.newtopchem.com/archives , /668

Minimum Order: 100

Pictures only for reference Price&order quantity could be negotiable engine parts,engine spare parts,diesel engine parts

Minimum Order: 1000

Function: Absort oil only while repelling water.Absorb oil or oil-based liquid only,engine oil,hydraulic oil,gasoline,diesel,kerosene…ec , t.

Minimum Order: 1 bags

DMAEE CAS:1704-62-7 Usage and Manufacturing Method Brief introduction. Dimethyldiethanolamine is a chemical substance. Alias: Dimethylaminoethoxyethanol Abbreviation: DMAEE English name: dimethyaminoethoxyethanol, dimethyl2-(2-aminoethoxy)ethanol Molecular formula: C6H15NO2 Relative molecular weight:133.2 CAS No.:1704-62-7 Formulation. Recipe weight:133.19 Purity percentage: ≥98.0% (GC) Physical form: Liquid Experimental operation. [ 50-00-0 ] + [ 929-06-6 ] = [ 1704-62-7 ] Phase I: 0.5 hr. Phase II: 100 - 110 °C; 2 h. Phase III: 120 °C; 4 h. Synthesis To a 250 ml three-necked flask was added 63.1 g of diethyleneglycolamine (0.6 mol), 34.5 g of paraformaldehyde (1.2 mol), stirred for 30 min and 63 g of formic acid (1.2 mol, 88%) was added dropwise at a temperature of 100 to 110 °C and reacted at about 100 °C for 1 h. Distill out 30 g under reduced pressure (vacuum - 0.094 MPa, kettle temperature 80°C). The distillation ended with 90.0% product and 9.8% impurity (S-2) content. _: The liquid from step 2) was transferred to a 500 ml distillation flask and distilled under reduced pressure at a vacuum of -0.094 mpa. 62°C component was n-butanol ester exchanged down to formic acid as butanol, 121° C DMAEE component that is the product. Collected 121 ° C component 128.3g, yield 96.5%, the Uses. DMAEE is a low odor reactive foaming catalyst, mainly used in rigid packaging foam, also used in molded flexible foam and polyether urethane flexible foam.DMAEE is also an important intermediate, used in polyurethane coatings, surfactants, mine reinforcement and many other fields. Zhongke's organic amine catalyst and curing agent series products will be put into production one after another, and the core catalyst and curing agent products will be used as the basis for the subsequent development of new materials for high value-added polyurethane and epoxy resin by precisely matching the market changes. Integrated manufacturing method of dmae and dmaee in microtubular reactor. A method of integrated preparation of DMAE and DMAEE in microtube reactor is disclosed, which includes the following steps in turn: pumping ethylene oxide and aqueous dimethylamine solution formed by mixing dimethylamine with water as catalyst as materials into the microtube reactor respectively, controlling the molar ratio of ethylene oxide to dimethylamine as 1~2:1; setting the reaction temperature in the microtube reactor as 60~90°C and pressure as 1.3 ±0.2 Pa, and the residence time of the material in the microtubular reactor is controlled to be 15～90s; the effluent from the microtubular reactor is an aqueous solution of DMAE and DMAEE. The method of the present invention has the advantages of high atomic economy, good reaction selectivity, mild reaction conditions, short reaction time, simple catalyst, and simple product separation. Safety information : Risk terminology R21:Harmful in contact with skin. R41:Risk of serious damage to the eyes. Safety Terminology S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39:Wear suitable protective clothing, gloves and eye/face protection. Storage and transportation. Should be kept sealed and stored in a dry, cool, ventilated warehouse Packaging. 200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the lid as soon as possible to prevent the mixing of other substances such as moisture to affect the performance of the product. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits. https://www.newtopchem.com/archives/405 , 65

Minimum Order: 100

CAS: 90-72-2 2,4,6-Tris(dimethylaminomethyl)phenol Production Process and Method Brief introduction. 2,4,6-tris(dimethylaminomethyl)ph , enol, an organic chemical substance, molecular formula: C15H27N3O. Chinese name: 2,4,6-tris(dimethylaminomethyl)phenol Foreign name: 2,4,6-Tris(dimethylaminomethyl)phenol English alias: 2,4,6-tris[(dimethylamino)methyl]phenol Alias: Epoxy accelerator DMP-30; Tris(dimethylaminomethyl)phenol Appearance: transparent liquid Chemical formula: C15H27N3O Molecular weight: 271.4314 CAS No.: 90-72-2 EINECS number: 202-013-9 Boiling point: 320.50 ℃ Density: 1.054 g/cm³ Flash point: 116.63 ℃ Refractive index: 1.517 Epoxy resin curing accelerator DMP-30 is 2,4,6 tris(dimethylaminomethyl)phenol, which is a tertiary amine curing agent. It can be used as an epoxy resin curing agent at room temperature, and also as an efficient accelerator for acid anhydride, polyvinylamine and aliphatic polyamine curing agents. This product contains phenolic hydroxyl group in its molecular structure, so the activity is increased and it can be used for fast curing, mainly for thermosetting epoxy resin curing agent and adhesive, and it can be used as accelerator of acid anhydride curing agent and amide curing agent for casting and pressure layer products, the amount of this product as curing agent is generally about 3-13%, and the amount as accelerator is generally 0.1-3%. This product can be used as a catalyst in rubber anti-ozone agent and rigid polyurethane foam raw material combination polyether. Production process. 2000L reaction kettle, 200kg of phenol, 720kg of dimethylamine, 520kg of formaldehyde added dropwise below 50 degrees. kg, after drop addition, raise the temperature to 70 degrees, keep warm for 2 hours, lower the temperature to 50 degrees, add 100 kg of sodium chloride Sodium chloride, stir, let stand, stratify, and dehydrate the crude product under pressure. Method of preparation. After the reaction of phenol with dimethylamine and formaldehyde, the reaction products are stratified, dehydrated under vacuum and filtered to obtain the finished product. Theoretical unit consumption: (one ton of product) Phenol: 400 kg Dimethylamine (40% aqueous solution) 1440kg Formaldehyde (37% aqueous solution) 1040kg Produce waste water about 1.8 tons, mainly containing a small amount of formaldehyde Dosage: As accelerator dosage is about 1~5% As a curing agent dosage of about 10% Application areas. Use one Used as curing agent for thermosetting epoxy resin, adhesive, binder for laminate material and flooring, acid neutralizer and catalyst in polyurethane production Application 2 Used as antioxidant, also used in dye preparation Application 3 Used as curing agent for thermosetting epoxy resin, adhesive, sealant for laminate materials and flooring, acid neutralizer and catalyst in polyurethane production. Numbering system. CAS No.: 90-72-2 MDL No.: MFCD00008330 EINECS No.: 202-013-9 RTECS No.: SN3500000 BRN No.: 795751 PubChem No.: 24900319 Safety information. Package Class: III Hazard Class: 8 Customs Code: 29222900 Dangerous Goods Transport Code: UN 2735 8/PG 3 WGK Germany: 1 Hazardous category code: R22; R36/38 Safety instructions: S26-S28-S2 RTECS number: SN3500000 Dangerous Goods Marking: Xn Safety terminology. S26 - Immediately after inadvertent contact with eyes, flush with plenty of water and seek medical advice. S28 - Immediately after inadvertent contact with skin, flush with plenty of soapy water. S2 - Avoid contact with children. S61 - Avoid release into the environment. Refer to special instructions/safety data sheet. S45 - In case of accident or discomfort, seek immediate medical attention (if possible, show its label). S36/37/39 - Wear appropriate protective clothing, gloves and goggles or mask. Storage and transportation. Should be kept sealed and stored in a dry, cool and ventilated warehouse Packaging. 200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. After the original packaging, please fasten the lid as soon as possible to prevent the mixing of other substances such as moisture to affect the performance of the product. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits. https://www.newtopchem.com/archives/397 , 33

Minimum Order: 100