Offers to Sell

Description : Connector : SMA R/A Jack PCB Mount Finished : Gold Our company manufactures a full range of RF connector products, including: 1) MMCX RF coaxial connectors 2) MCX RF coaxial connectors 3) SMA RF coaxial connectors 4) SMB RF coaxial connectors 5) TNC RF coaxial connectors 6) IPEX RF coaxial connectors 7) BNC RF coaxial connectors 8) UHF RF coaxial connectors 9) FME RF coaxial connectors We also have GPS Module, GSM Module, Bluetooth Module, 3G Module, GPS mouse, Personal Tracker, Vehicle Tracker, Bluetooth GPS Receiver, GPS Antenna, GSM Antenna, GPS/GSM Antenna, RF Cable, RF Connector etc.

Top Mount, SMT Type Stand off 4.0mm ELECTRICAL Current Rating: 0.5A per pin Voltage Rating: 50V DC Contact Resistance: 55mΩ max. Insulation Resistance: 500MΩ min. Dielectric Withstanding Voltage: 300VAC MECHANICAL Durability: 100 Cycle Insertion Force: 2.3Kgf max. Extraction Force: 2.3Kgf max. ENVIRONMENTAL Operating temperature range: -40℃~+85℃ Storage temperature range: -40℃~+85℃ SOLDER ABILITY Recommended IR Reflow Temperature: 260℃ 10Sec

The SIM7500E is Multi-Band LTE-FDD/GSM module solution in a LGA type which supports LTE CAT1 up to 10Mbps for downlink data transfer. It has strong extension capability with rich interfaces including UART, USB2.0, I2C, GPIO etc. With abundant application capability like TCP/UDP/FTP/FTPS/HTTP/HTTPS/SMTP/POP3 and MMS, the module provides much flexibility and ease of integration for customer's application. General features * FDD-LTE B1/B3/B7/B8//B20 * GSM/GPRS/EDGE 900/1800 MHz * Control Via AT Commands * Supply voltage range: 3.4V~ 4.2V * Operation temperature: -40℃ to +85℃ * Dimension: 24*27*2.75mm * Weight: 4.0g * GNSS gpsOne Gen 8B;standalone;assisted,XTR Specifications for Data transfer * LTE CAT1 - Uplink up to 5Mbps - Downlink up to 10Mbps * EDGE Class - Uplink up to 236.8Kbps - Downlink up to 236.8Kbps * GPRS - Uplink/Downlink up to 85.6Kbps * CSD - GSM data rate 14.4Kbps Other features * USB Driver for Microsoft Windows 2000/XP/Vista/Win7/Win8 * USB Driver for Windows CE/Mobile * USB Driver for Linux /Android * RIL supporting for Android/Windows CE/Mobile * Automatic installation for windows * Linux API SDK * Firmware update via USB * TCP/IP/IPV4/V6 Multi-PDP,MT PDP * FTP/FTPS/HTTP/HTTPS/SMTP/POP3/DNS/MMS * DTMF * MBIM to Win8 * Source code of the PC manager of the device for reference Interfaces * USB2.0 * UART * SIM card * I2C * GPIO * ADC * PCM

LTE-FDD/WCDMA/GPS Cellular Module U9507E-C1 is a wireless LTE CAT1 module which is designed for the global market. It is a consumptive product; It can be designed in many kinds of applications which can work on LTE-FDD/WCDMA/GPS/GLONASS(Optional) network. On LTE-FDD network, U9507E-C1 enables connect to the Internet at DL data speed up to 10Mbps and UL data speed up to 5Mbps, in the area where LTE service are not available, U9507E-C1 still enables reliable and secure data connect over WCDMA network. U9507E-C1 provides SMS, MMS, Phonebook functions as well as high speed access, and also audio function. It can be designed in many kinds of applications. Such as Data card, Video monitor, Tablet, Electric-book, MID, Vehicle equipment, etc. General features: * Output power: - Class 3 (0.25W) for LTE/WCDMA * Control via AT commands (3GPP TS27.005/3GPP TS27.007 ) * Supply voltage range: 3.3V- 4.2V * Low Power consumption - Sleep mode: 5mA - Power down: 50 μA * Dimensions: 31.0×30.0×2.5mm ,LCC * Operation Temperature : -40°C to +85°C Specifications for SMS: * Point-to-point MO and MT * SMS cell broadcast * Text and PDU mode Additional features: * VoLTE * Phone book * PCM * DTMF Band Configuration: U9507E-C1: * LTE-FDD Band 1/3/5/7/8/20/28 * WCDMA Band 1/5/8 GPS: * GPS frequency: 1575.42MHz * At least support 44 channels * Location accuracy: ＜10m * Sensitivity - Acquisition: -158dBm - Tracking: -162dBm * TTFF: - Cold Start: 60s - Warm Start: 45s - Hot Start: 15s GLONASS(Optional): * GLONASS frequency: 1601.7MHz * At least support 44 channels * Location accuracy: ＜10m * Sensitivity - Acquisition: -155dBm - Tracking: -160dBm * TTFF: - Cold Start: 60s - Warm Start: 45s - Hot Start: 15s Specifications for data: * Support Release 9 Category 4 * LTE-FDD up to 10 Mbps DL,5 Mbps UL * WCDMA up to 42.2Mbps DL,5.76Mbps UL * Transparent mode * PBCCH support * PPP-stack * Coding schemes CS 1,2,3,4 * FOTA * TCP/IP * NDIS Interfaces: - Power supply - USB 2.0 high speed - UICC/SIM/UIM interface 3 V / 1.8 V - UART - PCM - Antenna interface - HSIC Approvals: * RoHS * CE * GCF

The EX610 is a new generation of 5G wireless module, rich of Internet protocols, and industry-standard interfaces and abundant functionalities. It is Multi-Band 5G NR/mmWave/LTE-FDD/LTE-TDD/ HSPA+ module solution in a LGA type which supports 5G NR up to 4 Gbps data transfer. It has strong extension capability with rich interfaces including PCIe, UART, USB3.0, GPIO etc. The module provides much flexibility and ease of integration for customer's application. It is designed for applications that need high throughput data communication in a variety of radio propagation conditions. Due to the unique combination of performance, security and flexibility, this module is ideally suited for many applications. General features - Output power： - Class 3 (0.25W) for LTE/UMTS - Control via AT commands - Supply voltage range：3.2V- 4.4V - Dimensions：41.0×43.6.0×3.0mm - GNSS (GPS,GLONASS and BeiDou) - Sub-6G/LTE-TDD/LTE-FDD/WCDMA - Operation Temperature：-40°C to +85°C - MSL：3 Band Configuration - 5G NR： N1/N2/N3/N5/N7/N8/N12/N20/N25/N28/N40/N41 , /N66/N71/N77/N78/N79 mmWave：N257/N258/N260/N2 , 61 - 5G NR UL 2*2 MIMO：N41/N77/N78/N79 - LTE-FDD Band： B1/B2/B3/B4/B5/B7/B8/B12/B13/B14/B17/B1 , 8/B19/B20/B25/B26/B28/B29/B30/B32/B66/B71 - LTE-TDD Band： B34/B38/B39/B40/B41/B42/B43/B48 - DL 4*4 MIMO： B1/B2/B3/B4/B7/B25/B30/B38/B40/B41/B42/ , B43/B48/B66/N41/N77/N78/N79 - UMTS Band：B1/B2/B3/B4/B5/B8 Protocols: - TCP/ UDP/ PPP/ FTP/ HTTP/ HTTPS/SMTP/ SMTPS/ MMS/ FTPS/ NTP/ PING/QMI/ SSL/ NITZ/ CMUX/ MQTT Specifications for data - Support Release 15 - Support SA / NSA - 5G up to 4 Gbps DL,1.5G bps UL - LTE-FDD up to 2.4 Gbps DL,200 Mbps UL - LTE-TDD up to 2.4 Gbps DL,200 Mbps UL - DC-HSPA+ up to 42.2Mbps DL,5.76Mbps UL Non transparent mode - FOTA - NDIS - Additional features: - NoVR/VoLTE/CSFB - AGPS/SUPL2.0 - Dedicated GNSS_L1 and GNSS_L2/L5 - DTMF Interfaces - LGA - RF connector - Power supply - USB 3.0 with SS Gen2 - USB 2.0 high speed - UICC/SIM/UIM card interface 3 V, 1.8 V - UART(4-wire) - PCM - PCIE - I2C - GPIO - RGMII - SPI

The SIM7600CE is Multi-Band LTE-TDD/LTE-FDD/HSPA+/TD-SCDMA/EVDO and Dual- Band GSM/GPRS/EDGE module solution in a SMT type which supports LTE CAT4up to 150Mbps for downlink data transfer. It has strong extension capability with rich interfaces including UART, USB2.0, SPI, I2C,GPIOetc. With abundant application capability like TCP/UDP/FTP/FTPS/HTTP/HTTPS/SMTP/POP3 and MMS, the module providesmuch flexibility and ease of integration for customer's application. General features * Quad-Band TDD-LTE B38/B39/B40/B41 * Tri-Band FDD-LTE B1/B3/B8 * Dual-Band TD-SCDMA B34/B39 * Dual-Band UMTS/HSDPA/HSPA+ B1/B8 * CDMA 1X/EVDO BC0 * GSM/GPRS/EDGE900/1800 MHz * Control Via AT Commands * Supply voltage range: 3.4V~ 4.2V * Operation temperature: -40℃to +85℃ * Dimension: 50.80*31*5.35mm * Weight: 5.5g * GNSS gpsOneGen 8B;standalone;assisted,XTRA; Specificat , ions for Data transfer * LTE CAT4-Uplink up to 50Mbps, -Downlink up to 150Mbps * TD-SCDMA-Uplink up to 128Kbps, -Downlink up to 384Kbps * TD-HSDPA/HSUPA -Uplink up to 2.2 Mbps, -Downlink up to 2.8 Mbps * HSPA+ -Uplink up to 5.76Mbps, -Downlink up to 42 Mbps * UMTS-Uplink/Downlink up to 384Kbps * EDGE Class-Uplink/Downlink up to 236.8Kbps * GPRS -Uplink/Downlink up to 85.6Kbps Other features * USB Driver for Microsoft Windows 2000/XP/Vista/Win7/Win8 * USB Driver for Windows CE/Mobile * USB Driver for Linux /Android * RIL supporting for Android/Windows CE/Mobile * Automatic installationfor windows * Linux API SDK * Firmware update via USB * TCP/IP/IPV4/V6 Multi-PDP,MT PDP * FTP/FTPS/HTTP/HTTPS/SMTP/POP3/DNS/MMS * DTMF * MBIM to Win8 * Source code of the PC manager of the device for reference Interfaces * USB2.0 * UART * SIM card * SPI * I2C * Constant current sink * GPIO * ADC * PCM * SDIO

The EX520 is a new generation of 5G wireless module, rich of Internet protocols, and industry-standard interfaces and abundant functionalities. It is Multi-Band 5G NR/mmWave/LTE- FDD/LTE-TDD/ HSPA+ module solution in a M.2 type which supports 5G NR up to 4 Gbps data transfer. It has strong extension capability with rich interfaces including PCIe, UART, USB3.0, GPIO etc. The module provides much flexibility and ease of integration for customer's application. It is designed for applications that need high throughput data communication in a variety of radio propagation conditions. Due to the unique combination of performance, security and flexibility, this module is ideally suited for many applications. General features - Output power：- Class 3 (0.25W) for LTE/UMTS - Control via AT commands - Supply voltage range：3.2V- 4.4V - Dimensions：52.0×30.0×3.8mm - GNSS (GPS,GLONASS and BeiDou) - Sub-6G/LTE-TDD/LTE-FDD/WCDMA - Operation Temperature：-40°C to +85°C - MSL：3 Band Configuration - 5G Band： N1/N2/N3/N5/N7/N8/N12/N20/N25/N28/N40/N , 41/N66/N71/N77/N78/N79 mmWave：N257/N258/N260/ , N261 - LTE-FDD Band： B1/B2/B3/B4/B5/B7/B8/B12/B13/B14/B17/B1 , 8/B19/B20/B25/B26/B28/B29/B30/B32/B66/B71 - LTE-TDD Band： B34/B38/B39/B40/B41/B42/B43/B48 - LTE DL 4*4 MIMO： B1/B2/B3/B4/B7/B25/B30/B38/B40/B41/B42/ , B43/B48/B66/N41/N77/N78/N79 - UMTS Band：B1/B2/B3/B4/B5/B8 Protocols: - TCP/ UDP/ PPP/ FTP/ HTTP/ HTTPS/SMTP/ SMTPS/ MMS/ FTPS/ NTP/ PING/QMI/ SSL/ NITZ/ CMUX/ MQTT - Specifications for data - Support Release 15 - Support SA / NSA - 5G up to 4 Gbps DL,1.5G bps UL - LTE-FDD up to 2.4 Gbps DL,200 Mbps UL - LTE-TDD up to 2.4 Gbps DL,200 Mbps UL - DC-HSPA+ up to 42.2Mbps DL,5.76Mbps UL Non transparent mode - FOTA - NDIS Additional features: - NoVR/VoLTE/CSFB - AGPS/SUPL2.0 - Dedicated GNSS_L1 and GNSS_L2/L5 - DTMF Interfaces - M.2, TYPE 3042-S3-B - RF connector - Power supply - USB 3.0 with SS Gen2 - USB 2.0 high speed - UICC/SIM/UIM card interface 3 V, 1.8 V - UART(4-wire) - PCM - PCIE - I2C - GPIO

4G with SIM card holder is a wireless module which is designed for the global market. It is a consumptive product; It can be designed in many kinds of applications which can work on LTE-FDD/UMTS/GSM/GPS/GLONASS(Optional) network. On LTE-FDD network, 4G with SIM card holder enables connect to the Internet at DL data speed up to 150Mbps and UL data speed up to 50Mbps. In the area where LTE service are not available, 4G with SIM card holder still enables reliable and secure data connect over 3G(UMTS) or 2G(GSM) network. 4G with SIM card holder provides SMS, MMS, Phonebook functions as well as high speed access, and also audio function. It can be designed in many kinds of applications. Such as Data card, Video monitor, Tablet, Electric-book, MID, Vehicle equipment, etc. General features -EDGE multi-slot class 33 -GPRS multi-slot class 33 -Compliant to GSM phase 2/2+ -Output power: - Class 3 (0.25W) for LTE/UMTS - Class 4 (2 W) for GSM 900 - Class 1 (1 W) for GSM 1800 -Control via AT commands (3GPP TS27.005/3GPP TS27.007 ) -Supply voltage range 3.3V- 4.2V -Low Power consumption - Sleep mode: 3mA - Power down: 16 μA -Dimensions: 51.0×30.0×4.6mm -Operation Temperature: -40°C to +85°C -MSL : 3 Band Configuration -LTE-FDD Band 1/3/5/7/8/20/28 -LTE-TDD Band 38/40 -UMTS Band 1/5/8 -GSM Band 3/8 Specifications for GNSS -GPS frequency: 1575.42MHz -At least support 44 channels -Sensitivity - Acquisition: -158dBm - Tracking: -162dBm -TTFF - Cold Start: 28s - Warm Start: 18s - Hot Start: 1s Interfaces -RF connector -PCI Express® Mini Card Interface - Power supply - USB 2.0 high speed - UICC/SIM/UIM card interface 3V, 1.8V - UART - Analog Audio - PCM -Antenna connector -SIM Card Holder Specifications for data -Support Release 11 Category 4 -LTE-FDD up to 150 Mbps DL,50 Mbps UL -LTE-TDD up to 130 Mbps DL,35 Mbps UL -DC-HSPA+ up to 42.2Mbps DL,5.76Mbps UL -EDGE class 33: 296Kbps DL,236.8Kbps UL -GPRS class 33: 107kbps DL,85.6kbps UL -CSD up to 14.4 kbps -Non transparent mode -PBCCH support -PPP-stack -Coding schemes CS 1,2,3,4 -FOTA -TCP/IP -NDIS Specif , ications for SMS -Point-to-point Mo and MT -SMS cell broadcast -Text and PDU mode -Protocols -TCP/ UDP/ PPP/ FTP/ HTTP/ HTTPS/SMTP*/ SMTPS*/ MMS/ FTPS*/ NTP/PING/ QMI/ SSL/ NITZ/ CMUX/ MQTT* Additional features -VoLTE -Phone book -PCM -DTMF Approvals -RoHS / CE / GCF / RCM / NCC

This antenna system consists of two functional blocks, the LNA portion and the patch antenna. GENERAL ENVIRONMENTAL CONDITIONS Operation Temperature : -30℃ to + 80℃ Storage Temperature : -40℃ to + 100℃ Relative Humidity : 40% to 95% ELECTRICAL SPECIFICATIONS Operation Voltage : Min:2.5V Typ: 3.0V Max:5.5V Current Consumption : Typ: 11mA Max: 15mA @3.0V ANTENNA Frequency Range : 1575.42 ± 1.023 MHz. Bandwidth : 15 MHz min. ( Return loss –10 dB ) GAIN : at Zenith : + 5.0 dBi Typ. at 10° Elevation: -1.0 dBi Typ . Mounted on the 70mm*70mm ground plane. Polaration : RHCP Axialration : 3.0dB Max Mounted on the 70mm*70mm ground plane. LNA Frequency Range : 1575.42 ± 1.023 MHz Gain : 28dB Min. 30dB Typ. ( + 25 ℃± 5℃) Noise Figure : 1.6 dB Max. ( + 25 ℃ ± 5℃) @ 3.0V Output Impedance : 50Ω TOTAL SPECIFICATIONS (Through Antenna, LNA, Cable and Connector) RF Cable : RG174 , ψ2.7 ± 0.2mm , Black Cable Length : 5M ± 5cm RF Connector : SMA 180°(M) Frequency Range : 1575.42 ± 1.023 MHz Gain : at Zenith : Typ 35 dBi – (cable loss) Note:1 mounted on the the 70mm*70m ground plane Output Impedance : 50Ω Output VSWR : 2.0 Max

Features ● High gain and low noise figure ● With high rejection saw filter ● Ultra low power consumption ● Excellent Temperature Stability ● Magnetic Mount Base ● Varied cable length and connectors are available Application ● Car navigation system ● A.V.L tracking system Specification Dimension:L: 46.5mmW:46.5mm H:14mm Waterproof:100% waterproof Plastic color:Black Cable type:RG-174 Cable Length:5 meters Connector Type:SMA Mounting Method:Magnet

The Ct-G153 utilized SiRFstarV ™ and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance - Quad-GNSS : GPS and GLONASS, Galileo and BDS with future firmware update. Improving availability and accuracy of position solutions in urban canyon environments. - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -161 dBm - 52 track verification channels - SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - Reacquisition Time : 0.1 second - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. Hardware and Software - Based on the high performance features of SiRFstarV™ low power single core logic. - Adaptive micropower controller - Only 50 to 500μA maintains hot start capability (core logic) - < 10mW required for TricklePower™ mode - RoHS compliant (lead-free) - SMT pads allow fully automatic assembly processes equipment and reflow soldering - Advanced navigation features - Smart sensor supported by I²C interface - External interrupt input for context change detection Advantages - Built-in LNA. - Built-in internal ROM and based on Firmware 5.5.X - It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as laptop, mobile phone, DSC, etc. - Maintain tracking sensitivity as low as GPS @ -165dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) - Support SiRFaware™ technology - Support adaptive“Micro Power Controller”power management mode. - < 10mW TricklePower™, so user can leave power on all day instead of power off. - Suitable for battery drive devices that need lower power consumption application - Ideal for high volume mass production(Taping reel package) - Cost saving through elimination of RF and board to board digital connectors - Flexible and cost effective hardware design for different applications - Embed CGEE (Client Generated Extended Ephemeris) that can capture ephemeris data from satellites locally and predicts ephemeris up to 3 days. So if the module was off within 3 days, it could complete positioning process with limited time just like hot start.

The Ct-G340 w/Ct-G530P module is high performance, low power GNSS receiver, based on the SiRFStarVTM single chipset technology while providing fast time-to -first- fix. Its far reaching capability meets the sensitivity requirements of car navigation as well as other location-based applications. Ct-G340 w/Ct-G530P is designed to allow quick and easy integration into GPS-related applications, especially for compact size devices, such as: - Fleet Management / Asset Tracking - AVL and Location-Based Services Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - 52 track verification channels - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - RF Metal Shield for best performance in noisy environments - High sensitivity navigation engine (PVT) tracks as low as - GPS: -165dB, - GLONASS: -161dBm - SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN) - Tracks up to 8 CW jammers - Enbedded CGEE/SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - Reacquisition Time: 0.1 second Hardware and Software - Based on the high performance features of the SiRFstarV™ low power single core logic. - Adaptive micropower controller - Only 50 to 500μA maintains hot start capability (core logic) - <10mW required for TricklePower™ mode - RoHS compliant (lead-free) - Advanced navigation features - Smart sensor supported by I²C interface - External interrupt input for context change detection - MCX vs. RMCX or RSMA RF Connector select Advantage - Built-in LNA. - Built-in internal ROM and based on Firmware 5.5.X - It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc. - Maintain tracking sensitivity as low as GPS @ -165dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) - Support SiRFaware™ technology - Support adaptive “Micro Power Controller” power management mode. - <10mW TricklePower™, so user can leave power on all day instead of power off. - Suitable for battery drive devices that need lower power consumption application - Ideal for high volume mass production(Taping reel package) - Cost saving through elimination of RF and board to board digital connectors - Flexible and cost effective hardware design for different application - Embed CGEE (Client Generated Extended Ephemeris) that can capture ephemeris data from satellites locally and predicts ephemeris up to 3 days. So if the module was off within 3 days, it could complete positioning process with limited time just like hot start.

The Ct-G353 utilized SiRFstarV ™ and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo- tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -159 dBm52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Hardware and Software - Based on the high performance features of the SiRFstarV™ low power single core logic. - Adaptive micropower controller - Only 50 to 500μA maintains hot start capability (core logic) - < 10mW required for TricklePower™ mode - RoHS compliant (lead-free) - Advanced navigation features - Smart sensor supported by I²C interface - External interrupt input for context change detection Advantages - Built-in LNA. - Built-in internal ROM and based on Firmware 5.5.X - It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc. - Maintain tracking sensitivity as low as GPS @ -163dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) - Support SiRFaware™ technology - Support adaptive“Micro Power Controller”power management mode. - < 10mW TricklePower™, so user can leave power on all day instead of power off. - Suitable for battery drive devices that need lower power consumption application - Ideal for high volume mass production(Taping reel package) - Cost saving through elimination of RF and board to board digital connectors - Flexible and cost effective hardware design for different applications - Embed CGEE (Client Generated Extended Ephemeris) that can capture ephemeris data from satellites locally and predicts ephemeris up to 3 days. So if the module was off within 3 days, it could complete positioning process with limited time just like hot start.

Ct-G530P utilized SiRFstarV ™ and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built- in DSP and extremely low power consumption, the family can get fast location fixes for geo- tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -161 dBm - 52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Hardware and Software - Based on the high performance features of the SiRFstarV™ low power single core logic. - Adaptive micropower controller - Only 50 to 500μA maintains hot start capability (core logic) - < 10mW required for TricklePower™ mode - RoHS compliant (lead-free) - SMT pads allow fully automatic assembly processes equipment and reflow soldering - Advanced navigation features - Smart sensor supported by I²C interface - External interrupt input for context change detection Advantages - Built-in LNA. - Built-in internal ROM and based on Firmware 5.5.X - It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc. - Maintain tracking sensitivity as low as GPS @ -165dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) - Support SiRFaware™ technology - Support adaptive“Micro Power Controller”power management mode. - < 10mW TricklePower™, so user can leave power on all day instead of power off. - Suitable for battery drive devices that need lower power consumption application - Cost saving through elimination of RF and board to board digital connectors - Flexible and cost effective hardware design for different application - Embed CGEE (Client Generated Extended Ephemeris) that can capture ephemeris data from satellites locally and predicts ephemeris up to 3 days. So if the module was off within 3 days, it could complete positioning process with limited time just like hot start.