Offers to Sell

Chlorinated Polyethylene Membrane for High Speed Rail The chlorinated polyethylene waterproofing membrane is a colorful elastic waterproof material made of chlorinated polyethylene resin as the base material. Product Description The chlorinated polyethylene waterproofing membrane(CPE waterproof membrane) is a colorful elastic waterproof material made of chlorinated polyethylene resin as the base material, mixed with chemical additives and fillers, and processed by plastic refining, hot compounding, calendering, crimping, and other processes. The product divides into N class homogeneous and L class fiber conforming. The main material of chlorinated polyethylene, no double bond in its macromolecular structure, has good aging resistance, oil resistance, and chemical resistance;blending with rubber, high elasticity, high elongation, and good low-temperature resistance, and has strong adaptability to foundation settlement and concrete shrinkage joints. From this aspect, chlorinated polyethylene rubber blended waterproofing membrane has the dual characteristics of chlorinated polyethylene and rubber, is a better waterproof membrane for high speed rail.   Features of Waterproof Membrane for High Speed Rail: 1. High tensile strength, strong seepage resistance, good low-temperature flexibility, small expansion coefficient, strong adaptability to deformation, big coefficient of friction, can be used with a variety of adhesives, good bonding effect; 2. Aging resistance, long service life; 3. It can directly construct on freshly cast concrete, which can effectively shorten the construction period and save the construction cost.   Cautions: ①Configured paint should use up within 20 mins, with the allocation. ②Rainy days, snowy days, more than five winds, the temperature is higher than 35 ℃ or lower than 5 ℃ is not suitable for construction. ③Pay attention to ventilation when storing and transporting, avoid direct sunlight, and prohibit direct contact with acid, alkali, oil, and chemical solvent. Place in a cool and dry place, suitable temperature -15℃~35℃. The storage period is 12 months.   Construction Method: ①Preparation: clean up the oil, slick, cement slag, loose layer, etc. On the base surface, treat and repair the unevenness; do waterproofing reinforcement layer on specific parts first before large area construction. ②Construction: paste waterproofing materials with polyurethane or cement-based adhesive. Side painting binder while paving waterproofing materials, while scraping board in the upper part of the coil back and forth scraping solid, forbidden to have bulging, blistering and other phenomena, polyurethane waterproofing coating or cementitious adhesive for sealing. Get a free quotation about waterproof membrane for high speed rail

Polyvinyl Chloride (PVC) Waterproofing Membrane (Non-Reinforced) PVC is suitable for waterproofing and moisture-proof to tunnels, subways, and underground projects, waterproofing, and seepage-proof to water pools, water storage tanks, and sewage treatment tanks. ATTRIBUTE Reinforced:Non-Reinforced Color:Gray Raw materials:Asphalt Usage Environment:Flexible Applications:Roofing,Tunne , ls & Subway PRODUCT DESCRIPTION: PVC waterproofing membrane is a waterproof material made of PVC resin as the main raw material, mixed with appropriate amount of modifiers, antioxidants, ultraviolet absorbers, coloring agents and other additives, mixed, plasticized, extruded, calendered, cooled and packaged. Classification by the presence or absence of composite layer: no composite layer for the N class, with fiber in line with the L class; according to the physical and chemical properties are divided into typeⅠ and typeⅡ. The membrane is a polymer membrane formed by combining a double-sided PVC plastic layer and a polyester reinforcement in the middle through a specific extrusion coating process, using polyester fabric as reinforcement. The combination of the advanced polyvinyl chloride plastic layer and the mesh structure of the polyester fabric gives the membrane good dimensional stability and a low coefficient of thermal expansion. Enhances the long-term performance of the coil when exposed directly to the natural environment.Get a qoutation.   Product Characteristics: 1. PVC waterproofing roll-roofing material has high tensile strength, good elongation, small thermal dimensional change rate. 2. PVC has good weldability, the seam hot air welding, and the parent material into one. 3. PVC has well water vapor diffusion, condensate easy to discharge, stay to the grass-roots level of moisture, moisture easy to discharge. 4. Resistant to aging, ultraviolet radiation, chemical corrosion, and root penetration. 5. Low temperature (-20 ℃) has good flexibility. 6. Long service life (25 years for roofing, more than 50 years for underground), and no environmental pollution. 7. The surface reflects ultraviolet radiation, PVC waterproofing roll-roofing surface absorbs less heat, and the temperature is low. 8. Has good flexibility and stretchability, high tensile strength, well dimensional stability, high mechanical strength, erosion resistance, root penetration resistance, weathering and UV resistance, and hail resistance. If you have any question on PVC Waterproofing Membrane, please contact us.

One Component Polyurethane Waterproof Coating Good waterproofing performance, room temperature curing, waterproof layer without joints, high strength, elongation, strong adaptability to deformation of the waterproofing base, especially for complex engineering parts waterproofing effect. ATTRIBUTE Color:Gray Raw materials:Rubber and plastic Applications:Basement & Culvert,Tunnels & Subway Usage Environment:Flexible PRODUCT DESCRIPTION:  Construction temperature: 5-40℃ Quality guarantee period: 6 months Reference dosage: 2.0~3.0kg/m²   Product Description: Polyurethane waterproof coating is formed by the polymerization reaction of isocyanate, polyether, and other prepolymer-containing isocyanate groups, with catalysts, anhydrous additives, anhydrous fillers, solvents, etc., by mixing and other processes made of one-component polyurethane waterproof coating. The coating is reaction-curing (moisture-curing) coating, with high strength, elongation, good water resistance, and other characteristics. Strong adaptability to grass-roots deformation. Polyurethane waterproof coating is a liquid construction of one-component environmentally friendly waterproof coating, is imported polyurethane pre- polymer as the basic ingredients, with no tar and asphalt, and other additives. It is air moisture contact after curing, in the grass-roots surface to form a layer of solid tough no joints overall anti-film. Custom your waterproof solution.   Features:  1.Easy to use, paint in portions on the grass-roots level, and form a complete waterproof film. 2.Good resistance to high and low temperatures, watertight, airtight. 3.Does not contain coal tar, petroleum asphalt, other substances, stable performance. 4.Not contain any solvent, has non-toxic and tasteless coating film after curing, stable performance of coating film during use. 5.Good homogeneity of the coating, no delamination, precipitation phenomenon. 6.High bonding strength, good adhesion to concrete, wood, metal, ceramics, other materials, easy to repair.   Advantages: Long term durability and wear-resistant UV and weather-resistant Resistant to alkaline cleaners, battery acid and fuels Resistance to corrosion Impermeability Resistant to root penetration   Construction Method: 1. Require a firm base, no floating slurry, oil stain, etc. 2. Can be scraped or rolled construction, the next layer and the previous layer of painting direction perpendicular.   Cautions: 1. Storage: It should be stored in a cool and ventilated room, and the indoor temperature should not exceed 40℃. Under normal storage and transportation conditions, the shelf life is six months from the date of production. 2. Transportation: transport as general cargo, avoid sun and rain.Get a free quotation.

Waterproof Butyl Tape Butyl waterproof tape is completely solvent-free, so it does not shrink and emit toxic gases. Because it is not cured for life, it has good followability to thermal expansion and contraction and mechanical deformation of the adhered surface, and is an extremely advanced waterproof sealing material. ATTRIBUTE Color:White Raw materials:Rubber and plastic Usage Environment:Flexible Applications:Commercial buildings PRODUCT DESCRIPTION:  Butyl rubber as the main raw material, with other additives, through advanced technology processing made of a lifelong non-curing type of self-adhesive waterproof sealing tape, it has a strong adhesion to a variety of materials on the surface, while having good weather resistance, aging resistance and waterproof, and the surface of the object to play a sealing, shock absorption, protection and other roles. The product is solvent-free, so it does not shrink and emit toxic gases. Because it is not a cure for life, with good followability to thermal expansion and contraction and mechanical deformation of the adhered surface and is an advanced waterproof sealing material. Dayuwang is one of the most professional butyl tape manufacturers and suppliers, if you are interested in our butyl waterproof tape,please feel free to contact us.   Features: 1.Not cured for life, can maintain permanent flexibility, and can withstand a certain degree of displacement. 2.Good waterproof sealing and chemical resistance, strong resistance to ultraviolet light (sunlight), up to more than 20 years of service life. 3.Easy to use, accurate dosage.Easily applied, instant adhesion to most substrates & long life durability with no leaching. 4.Waterproofing in wet rooms, bathrooms, balconies & window areas. 5.Compatible with most tile adhesives & texture coating systems.   Product Specifications: Item Unit Detection value Basic composition Single-component butyl rubber Heat resistance 90℃, 2h without flowing Low temperature flexibility -40℃ no crack Adhesion holding force Steel ball 13.5 Elongation % 420 Recovery rate % 75 Moisture permeability g/m 24hr 0 Density g/cm 1.35±0.05 Peel strength Aluminum plate /cm 33.9 Color steel plate /cm 35.5 Cement mortar board /cm 38.6 Copper plate /cm 34.1 Glass board /cm 37.3   Cautions 1.In addition to low-temperature flexibility, the above performance testing conditions are 23℃. 2.Please remove water, oil, dust, and other dirt from the surface of the sticky sheet before use. 3.The tape should be stored in a dry and cool place, away from heat sources, direct sunlight, or rain. 4.The product is a self-adhesive material, amd once pasted in place will achieve the best waterproof effect. Get a quote.

Ethylene vinyl acetate sheets bitumen roof sheets EVA, ECB, and PE waterproofing membrane is ethylene-vinyl acetate copolymer, ethylene-vinyl acetate, asphalt co-polymer, and polyethylene as the base material mixed with the right amount of auxiliaries, by mixing, plasticizing, extrusion, calendaring, cooling, packaging, and waterproof materials. ATTRIBUTE Surface:Smooth Surface Reinforced:Non-Reinforced Raw materials:Asphalt Usage Environment:Flexible Applications:High Speed Rail,Tunnels & Subway PRODUCT DESCRIPTION Bitumen, also known as asphalt, is a sticky, black and highly viscous liquid or semi-solid form of petroleum. Thanks to its waterproofing qualities, it is widely used in construction. Bituminous Waterproof Membrane are perfect for waterproofing roofs, basements, below-ground structures, bridges and other structures.   Product Characteristics 1. EVA waterproofing membrane has outstanding softness, construction operability, and good waterproofing effect due to its tensile strength, tear strength, and small relative density. ①Good organic chemical reliability, corrosion resistance to strong acids and alkalis and salt solutions, and good insulation characteristics. ②Good flexibility, ductility and light transmittance, easy for the actual operation of engineering construction. ③High quality impact resistance, high tensile strength and good anti-aging properties. ④High quality barrier characteristics to gas and environmental humidity, and is a relatively highly impermeable raw material. 2. ECB waterproof board tensile strength, elongation, good puncture resistance, in a complex environment with vibration, distortion can also achieve a good waterproofing effect. 3. PE waterproof board has good toughness and good chemical resistance, anti- aging properties, not easy to corrode, and long service life..

FGB (SHANDONG) BEARING MFG CO., LTD. Which is a Professional R&D, production and sales Spherical Plain Bearing (Joint Bearing) manufacturer in China since 2004. The registered trademark is FGB. Sizes ranges from 20mm~320mm, including phosphate and non phosphate products. - Joint (Beef Eye) Bearings - Maintenance Free Radial Spherical Plain Bearings (GETX) - Maintenance Free Inclined Spherical Plain Bearings (GAC..F) - Maintenance Free Spherical Plain Bearings (GX..F) - Tie Rod Ends (Knuckle Heads) - Maintenance Free Tie Rod Ends (Knuckle Heads) 1. Spherical plain bearings : GE, GEH(GEG), GEZ, GE-C, GE-UK, GEEM, GEEW... 2. Rod ends bearings : GK, GF, GAS, GIHNK, GIHOK, GIHRK-DO... 3. Cylinder earring bearing : SK, SF, SIA, SIQ, SIR, SIRN, SIQG, SFEW... Mr. Leo Jiang Marketing and Sales Director WeChat / Whatsapp: +86-187 6957 2768 E-mail : leojiang@fgbearing.com Models: GE60ET-2RS GE60UK-2RS GE60EC-2RS ID: 60 mm OD: 90 mm Width: 44 / 36 mm Weight:1.1 kg GE20UK-2RS / GE20ET-2RS / GE25UK-2RS / GE25ET-2RS / GE30UK-2RS / GE30ET-2RS / GE35UK-2RS / GE35ET-2RS / GE40UK-2RS / GE40ET-2RS / GE45UK-2RS / GE45ET-2RS / GE50UK-2RS / GE50ET-2RS / GE60UK-2RS / GE60ET-2RS / GE70UK-2RS / GE70ET-2RS / GE80UK-2RS / GE80ET-2RS / GE90UK-2RS / GE90ET-2RS / GE100UK-2RS / GE100ET-2RS / GE110UK-2RS / GE110ET-2RS / GE120UK-2RS / GE120ET-2RS / GE140UK-2RS / GE140ET- 2RS / GE160UK-2RS / GE160ET-2RS / GE180UK-2RS / GE180ET-2RS / GE200UK-2RS / GE200ET- 2RS / GE220UK-2RS / GE220ET-2RS / GE240UK-2RS / GE240ET-2RS / GE260UK-2RS / GE260ET- 2RS / GE280UK-2RS / GE280ET-2RS / GE300UK-2RS / GE300ET-2RS / GE320UK-2RS / GE320ET- 2RS / GE340UK-2RS / GE340ET-2RS / GE360UK-2RS / GE360ET-2RS / GE380UK-2RS / GE380ET- 2RS /

Minimum Order: 5 dozens

PRODUCT ADVANTAGES Let us go visit Cost Efficient The reduction of steel consumption is in line with the national policy guidance of low-carbon economy, energy conservation and emission reduction. In addition to huge social benefits, it also provides customers with reliable, guaranteed and transformable multi-functional equipment, which greatly reduces the procurement cost of enterprises. With less basic components and modular design, the costs of erection and dismantling, transportation, leasing and maintenance will be saved accordingly, and the assembly is fast and easy. Enhanced Performance With the use of high strength steel and reasonable mechanical design the bearing load of the standard is up to 200,000 N. Reliable Quality The whole product processing goes through more than 20 processes, and each process is carried out by specific machine to reduce the intervention of human factors, especially the production of ledgers and vertical standards. The full- automatic welding machine is adopted to achieve high product precision and stable and reliable quality. Life Extension The surfaces of all the scaffolding structure parts are processed by hot-dip galvanizing techniques, which not only improves the service life of the product, but also provides further guarantee for safety, aiming to make it beautiful and highly recognizable. (service life more than 15 years) Easy Storage It is more convenient for storage, loading, unloading and transportation. It is suitable for the construction of internal and external frames, cast-in-situ beams, formwork support, scaffolding, bridges, stage erection, etc. SPECIFICATIONS Name Type OD(mm) WT(mm) Material     Standard 3m 60\48 3.25 Q355B 2.5m 60\48 3.25 Q355B 2m 60\48 3.25 Q355B 1.5m 60\48 3.25 Q355B 1m 60\48 3.25 Q355B 0.5m 60\48 3.25 Q355B 0.35m 60\48 3.25 Q355B 0.25m 60\48 3.25 Q355B 0.2m 60\48 3.25 Q355B   Ledger    0.3m 48 2.75\2.5 Q235B 0.6m 48 2.75\2.5 Q235B 0.9m 48 2.75\2.5 Q235B 1.2m 48 2.75\2.5 Q235B 1.5m 48 2.75\2.5 Q235B 1.8m 48 2.75\2.5 Q235B  Diagonal Brace 1.5m 42 2.75 Q195 1.2m 42 2.75 Q195 0.9m 42 2.75 Q195 Adjustable U Head Jack 38#600 Base Jack 38#500 COMPONENTS 01Rosette Roset , tes have 8 holes, which connect to ledgers, standards and diagonal braces respectively. 02Wedge Pin 03Ledger Head 04Ledger Ledgers are available in lengths of 2.40 m, 2.10 m, 1.80 m, 1.50 m and 1.20 m. Ledgers are connected to the vertical Standards using the wedge pin. This connection is extremely strong and prevents the possibility of loose components. 05Brace Head 06Diagonal Brace Diagonals attach to the rosettes using the same integrated wedge connection as the Ledgers. 07Standard Rosettes are welded every 0.5m in the extension direction, and a connecting rod is welded at one end. 08Base Jack As the first component of the Ringlock system to be assembled, the base jacks ensure the correct transfer of loads to the ground.

Minimum Order: 26

Our main product is nature veneer, also known as real wood veneer. We supply over 100 variation of veneers produce from timber found all over the world, from bulk species like BALSA WOOD, MAHOGANY WOOD, TEAK WOOD, MERANTI WOOD, PINE WOOD, and Other Indonesian Wood, to special and exotic species such as burls, crotch, swirl, figured veneer. SVLK-certified products are available upon request. Every nature veneer features a bonafide grain and color that reflects the tree it came from and environment where it has grown. Available wood for veneer : - Albasia Falcata Wood. - Balsa Wood. - Mahogany Wood. - Meranti Wood. - Merbau Wood. - Pine Wood. - Teak Wood. - Yellow Balau Wood. - Rose Wood. - or by customer request

Minimum Order: 18 sets

Barecore is used as thick core sheet in blockboard panels. Barecore is made of wooden sticks which are added with adhesive in a composer. Barecore can be a byproduct of the plywood mill. The core is usually too tough to peel, saw or slice into sticks. Barecore has a thickness of 10 - 13 cm, glued, and arranged to be a panel, with or without heating depending on the type of adhesive used. Barecore is strips of solid wood glued together to be a board. Barecore is commonly used as thick core sheet in melamine board or block board. Material : Albasia Falcata / Balsa Wood / Mahogany Wood / Meranti Wood / other wood by request Length : 2440 mm or by request Width : 1220 mm or by request Thickness : 13 mm or by request Glue : PVAC or by request Finishing : Non Sanding or by request Quality : by request. Available wood : - Albasia Falcata Wood. - Balsa Wood. - Mahogany Wood. - Meranti Wood. - Merbau Wood. - Pine Wood. - Teak Wood. - Yellow Balau Wood. - Rose Wood. - or by customer request

Minimum Order: 100

BLOCKBOARD A plywood board which veneer layers using the core are replacing by blocks of wood, the direction of grain blocks running at right angles to the adjacent veneer. Material : Albasia Falcata, Shorea Acuminata Length : 2440 mm Width : 1220 mm Thickness : 15 mm & 18 mm or by request Glue : WBP / MR / E0 or by request Finishing : Sanding or by request Available wood : - Albasia Falcata Wood. - Balsa Wood. - Mahogany Wood. - Meranti Wood. - Merbau Wood. - Pine Wood. - Teak Wood. - Yellow Balau Wood. - Rose Wood. - or by customer request

Minimum Order: 50

KSL WOOD can supply and install (as plywood contractor) many species or types of plywood and timber use for indoor and outdoor, construction, light and heavy industrial usage, decorative wood façade, customizable specification to make sure you have the best quality plywood supply in Indonesia to fit your requirement. Please send us more detailed information such as the exact sizes and dimensions about your plywood needed, we will back with a competitive price. Available wood : - Albasia Falcata Wood. - Balsa Wood. - Mahogany Wood. - Meranti Wood. - Merbau Wood. - Pine Wood. - Teak Wood. - Yellow Balau Wood. - Rose Wood. - or by customer request

Minimum Order: 50

Balsa wood is often used as construction material for radio controlled model aircraft and as a core material in composites; for example, the blades of many wind turbines are made partially of balsa. In table tennis paddles, a balsa layer is typically sandwiched between two pieces of thin plywood. Balsa wood is also used in laminates with glass-reinforced plastic (fiberglass) for making high-quality balsa surfboards and the decks and topsides of many types of boats, especially pleasure craft under 30 m (100 ft) in length. Starting with the 5th generation Chevrolet Corvette, the floor pan of the Corvette was composed of balsa sandwiched between two sheets of carbon fiber reinforced plastic. Compared with common wood, balsa wood is applied to many areas owns to its unique features. 1. Aircraft: used as a laminboard 2. Model: such as plane, boat and car 3. Fishing: fishing buoy 4. Industry: wind blade 5. Sports: such as tennis bat and surf board 6. Art and craft 7. Mould: FRP mould 8. Others: pronunciation board, sculpture, floor board, overlaid board and etc. We process balsa wood into sheets, sticks and blocks as in many specifications as per customer's request.

Minimum Order: 10000

he laminated intelligent glass is laminated safety glass. The electrical dimming film consists of PDLC formulation that is sealed between two panes of glass. Due to the nature of intelligent glass, it can be positioned easily side by side (glass to glass) without the need for any vertical frames which makes it ideal solutions for glass walls and partitions, creating a minimal and contemporary look with elegance. Switchable laminated privacy glass offers greater safety and security in both the workplace and the home. Our unique manufacturing process means that our laminated panels provide superior performance and clarity compared to other products in the market. The switchable layer is sandwiched between two toughened glass panels, making our laminated intelligent glass a highly durable and safe solution for specialist applications such as healthcare, public areas, showers & wet rooms, hotels & hospitality, clean rooms, etc. HTTPS://GLOBALSMARTGLASS.COM HTTPS: , //twitter.com/GLOBALSMARTGLAS

Minimum Order: 1 bags

The laminated intelligent glass is laminated safety glass. The electrical dimming film consists of PDLC formulation that is sealed between two panes of glass. The switchable layer is sealed between two toughened glass panels, making our laminated intelligent glass a highly durable and safe solution for public and private applications such as healthcare, public areas, showers & hotels etc. Due to the nature of intelligent glass, it can be positioned easily side by side (glass to glass) without the need for any vertical frames which makes it ideal solutions for glass walls and partitions, creating a minimal and contemporary look with elegance. Switchable laminated privacy glass offers greater safety and security in both the workplace and the home. Our unique manufacturing process means that our laminated panels provide superior performance and clarity compared to other products in the market. The switchable layer is sandwiched between two toughened glass panels, making our laminated intelligent glass a highly durable and safe solution for specialist applications such as healthcare, public areas, showers & wet rooms, hotels & hospitality, clean rooms, etc. HTTPS://GLOBALSMARTGLASS.COM HTTPS: , //twitter.com/GLOBALSMARTGLAS

Minimum Order: 1 bags