Offers to Sell

1. High speed opening and closing The running speed can reach 2m/s, 10 times as traditional roller shutter door. This obviously improves passing efficiency through it and enhances overall output. 2. High frequency operation The operation frequency can reach more than 1000 times per day without any faults. This meets need of heavy traffic in some areas. 3. High-level automation Automatic radar or other devices can be equipped, realizing auto control of the door. This enhances automation level and work efficiency. 4. Excellent safety performance Dual protection design. Every door is equipped with safety photo sensor and proximity sensor, avoiding collision accidents and protecting passing human or vehicles. 5. Effective insulation Benefiting from fast opening and closing, it can reduce the air flow between indoor and outdoor and prevent dust from entering the room. At the same time, energy is saved by reducing thermal conduction. Technical Parameter: Tensile strength(wrap/weft) 5700/5100N/5m Tearing strength(wrap/weft) 900/800N Use temperature -30°C- +70°C Fire protection Level French standard NF-P92-503 Or German standard M2 DIN 4120 B1

Custom Models with Swing Function Twin Screw Extruder

OEM T4A1060, LR094226,LR094225,Engine mount For Land rover & Jaguar.Fuel-driven car engines will vibrate when they are running, but thanks to today's car- making technology, today's cars have very good NVH sound insulation and shock resistance, and there is very little rough vibration transmitted to the cabin when driving; It's just that with the increase of time and mileage, your car is likely to experience more and more vibrations, except that the engine state is not as good as before, if the vibration is abnormally obvious, it may be time to replace the Engine Mounting! Product Description Product name Car engine mounting OEM NO. T4A1060, LR094226 Size OEM Size Brand Name LHM Warranty 1 year Packing Neutral Packing,Original packing,Accept Customize Payment terms T.T Western Union MoneyGram Delivery time About 7-15 days receiving your payment, mainly depend on the quantity Color As shown Material Rubber&Aluminum Car Type Land rover,Jaguar Shipment By air, By sea,By express

ST136 pellet durability Index tester (pellet particle pulverization rate tester) is a special instrument for testing PDI value of pellet feed.The pellet pellet produced by the pellet factory must have enough durability to withstand the impact of the transportation process, reduce the fine powder, and meet the customer's appearance requirements for the pellet feed. PDI tester Pellet durability Index tester is one of the most important indicators to reflect the quality of pellet feed. It is used to measure the relative ability of pellet crushing resistance in the process of conveying and handling of pellet pellet products The higher the PDI value, the stronger the crushing resistance, the better the particle quality and the higher the pellet utilization.

We could produce C-103 niobum alloy wire, rod, sheet and target as per your requirements.

Minimum Order: 1 bags

planar targer and rotary target as per your request.

Minimum Order: 1 bags

Nickel Wire Mesh Nickel wire mesh, It means the metal mesh products made of high purity nickel material (nickel wire, nickel plate, nickel foil...) with the nickel content of 99.5% or more. According to the production process, the products are divided into the following types: A.Nickel wire woven mesh: metal mesh woven by nickel wire (warp and weft); B.Nickel wire knitted mesh: knit mesh woven by nickel wire (hook knitting); C.Nickel stretching mesh: rhombus mesh by stamping and stretching from nickel plate, nickel foil. D.Nickel punching mesh: Various hole shapes metal mesh through stamping from nickel plate, nickel foil; Main Materials: N4, N6; N02200 Executive standard: GB/T 5235; ASTM B162 The main nickel content of N6 material is more than 99.5%. The nickel wire mesh used in N4 material can be completely replaced by the nickel wire mesh made of N6 material; N6 material which meets the requirements of GB/T 5235 can also replace N02200 material which meets the requirements of ASTM B162. Detailed introduction of products

Detailed introduction of products High tensile carbon steel wire mesh is a kind of wire mesh made of various carbon steel wires through warp and weft woven. The raw materials are generally Q295, but there are also high tensile carbon steel wire, copper coated steel and other materials. YKM low carbon steel mesh can be divided into plain weave square mesh, twill weave square mesh, plain dutch mesh, twill dutch weave mesh, herringbone mesh, reverse dutch weave mesh, etc. YKM is also specialized in the production of high quality low carbon steel, the raw mesh for epoxy coated wire mesh. Product characteristics of custom filter Low Carbon Steel Mesh： YKM low carbon steel mesh product characteristics 1, Flat mesh surface, tightly weaved; 2, Uniform mesh opening, high accuracy; 3, Reliable filtration accuracy; 4, Long life time.

Mesh Further Processing Product Through knowledge of market and customer's demand in these years, YKM has accumulated rich experiences in mesh products deep processing, and self- designed slitting, plasma cutting,ultrasonic cleaning, pleating, welding and other kinds of processing equipment. According to customers' request, stainless steel wire mesh, nickel wire mesh, low carbon steel wire mesh, galvanized wire mesh, epoxy coated wire mesh etc. can be produced into mesh slits with different width and length, or various shapes of mesh discs, tolerance range can be accurate to ±0.1mm. YKM can supply mesh slits with the length up to 30000 feet, and make sure the stability of product quality and safety of the transportation at the same time. YKM also can design and manufacture mesh tube, mesh bowl, custom shaped mesh discs China, spots welding discs and other further processing mesh products.

Nickel wire mesh, also called nickel mesh screen, nickel mesh and Nickel wire cloth. It means the metal mesh products made of high purity nickel material (nickel wire, nickel plate, nickel foil...) with the nickel content of 99.5% or more. According to the production process, the nickel mesh screen are divided into the following types: A.Nickel wire woven mesh: metal mesh woven by nickel wire (warp and weft); B.Nickel wire knitted mesh: knit mesh woven by nickel wire (hook knitting); C.Nickel stretching mesh: rhombus mesh by stamping and stretching from nickel plate, nickel foil. D.Nickel punching mesh: Various hole shapes metal mesh through stamping from nickel plate, nickel foil; Main Materials: N4, N6; N02200 Executive standard: GB/T 5235; ASTM B162 The main nickel content of N6 material is more than 99.5%. The nickel wire mesh used in N4 material can be completely replaced by the nickel wire mesh made of N6 material; N6 material which meets the requirements of GB/T 5235 can also replace N02200 material which meets the requirements of ASTM B162. YKM has been designing and developing nickel mesh since 2009 and has 10 years of R&D and production experience. In the process of product development, the whole NC intelligent transformation of the loom is carried out to improve the quality of the product

epoxy coated welded wire mesh introduction Industrial epoxy mesh is mainly used in hydraulic or air filters as the supporting layers, it is the main part of the filters. Civil epoxy mesh is mainly used as the security screen in the High-grade apartments and office buildings. It is formed by making the special epoxy powder adhering on surface of mesh woven with different type of wires through the electrostatic spraying process, then in the course of time and temperature, the epoxy powder melts and covers on the mesh surface to form the dense protecting layer. The common substrate mesh are stainless steel mesh, aluminum mesh, mild steel mesh. The epoxy powder includes indoor types and outdoor types. YKM also could develop according to customers requirement. epoxy coated welded wire mesh characteristics After surface treatment, the interlacing points are fixed, the mesh holes are even and square, the warp and weft wires are vertical, the product is not easy to loosen and deform, and the supporting force is strengthened; The mesh surface is soft, the mesh is easy to shape. Different colors of powder could coated. The color is even and consistent.

Copper mesh is made of various copper wires through warp and weft woven. YKM copper mesh can be divided into brass mesh, phosphor copper mesh, red copper mesh. Materials No. H60~H90 Property: Non-magnetic, wear resistant, good ductility. Specification: 2mesh~200mesh, width: 0.762~1.6m Weave: plain weave, twill weave, dutch weave. Application: Filtration various particles, powders, porcelain clay, glass, porcelain printing, filtering liquids, gases. Phosphor mesh Another name Tin bronze mesh Materials: phosphor copper wire (Tin bronze wire) Property: Non-magnetic, wear resistant, good ductility. Specification: 2mesh~400mesh, Width: 0.762~2m Weave: plain weave, twill weave.

Industrial epoxy mesh is mainly used in hydraulic or air filters as the supporting layers, it is the main part of the filters. Civil epoxy mesh is mainly used as the security screen in the High-grade apartments and office buildings. filter Epoxy Coated mesh is formed by making the special epoxy powder adhering on surface of mesh woven with different type of wires through the electrostatic spraying process, then in the course of time and temperature, the epoxy powder melts and covers on the mesh surface to form the dense protecting layer. The common substrate mesh are stainless steel mesh, aluminum mesh, mild steel mesh. The epoxy powder includes indoor types and outdoor types. YKM also could develop according to customers requirement. Product characteristics about gas screening Wire Mesh： After surface treatment, the interlacing points are fixed, the mesh holes are even and square, the warp and weft wires are vertical, the product is not easy to loosen and deform, and the supporting force is strengthened;

Stainless steel wire mesh is made of stainless steel wire through warp and weft woven. Mainly used for the filtration and screening of gas, liquid and solid, the separation of media and so on. With resistance for acid, alkali, high temperature and grind, acid resistance Wire Mesh is widely used in industries like petroleum, chemical, automotive, new energy, food, pharmaceutical and others. According to the opening type and woven type, the stainless steel woven mesh can be divided into square mesh(plain weave, twill weave), dutch weave mesh(plain dutch weave, twill dutch weave, double warp dutch weave, reverse plain dutch weave, reverse twill dutch weave, optimized design). Square mesh: generally the wire diameter of warp and weft are the same, the mesh count of warp and weft are the same(rectangular mesh are not the same for warp and weft mesh count), weaving type can be divided into plain weave and twill weave.