Offers to Sell

Product Description Suitable for cutting a wide range of material with the maximum cutting force 9.8N (1kgf) . The FC2250 series is available with different table size and media hold down methods depending on the application requirements. A wide range of materials can be cut with great precision, including PET film for electronic design, chipboard, magnetic sheet or roll, matte board, gasket, marking film, sandblast rubber, high-intensity reflective film, and more! The FC2250 Large Format flatbed cutting plotter is available in 3 table sizes: 24″x36″, 47″x36″ and 68.5″x36″, with optional tool head configurations and material hold-down systems. Dual Head Design features 500 grams and 1000 grams maximum down force for more efficient marking and cutting workflows. Features Dual Head Design: 500/1000 grams Cutting Force 2 Media Hold down methods available: Electrostatic or Vacuum Operate in Horizontal or Inclined Model (Vacuum table-horizontal only) D-Cut Software imports DXF Datax Cutting Master Plug-in for Adobe® Illustrator 0.118″ (3mm) Blade for cutting thicker material up to E Flute New Optional Creasing Tool for Corrugated Media Employed in These Industries Garment Pattern Cutting & Marking Shoe Pattern Cutting & Marking Package Design Prototyping Monument & Stone Sandblast Mask Industrial Films for Electronics Reflective Highway and Road Signs Offset Printing Blanket cutting Architectural Model Building The FC2250 Series Cutting Plotters Handle a Wide Range of Media Apparel patterns Compressed foam sheets Corrugated cardboards Packaging samples Containers and road signs Sandblast rubber templates Stencils, gaskets Packaging short run The FC2250 Comes in Three Table Sizes FC2250-60 24″ X 36″ FC2250-120 36″ X 47.2″ FC2250-180 36″ X 68.5″ Specfications Model name FC2250-60VC FC2250-120VC FC2250-120MG FC2250- 180VC Configuration Digital servo system, Flatbed Media hold-down method Vacuum suction *1 Magnetic Vacuum suction *1 Effective cutting area 610 x 920 mm (24.0 x 36.0 inch) 1200 x 920 mm (47.2 x 36.0 inch) 1740 x 920 mm (68.5 x 36.0 inch) Mountable media 950 mm (37.4 inch)(Y-axis direction) Media type 6Marking film (vinyl, fluorescent, and reflective) Stiff paper/card (for stencils, etc.)up to 1.0 mm thick *2 Polystyrene foam sheets *3 Sandblast rubber sheets up to 1.0 mm thick *3 Microflute board (F/G grades) Clear sheets for plastic boxes High-intensity reflective film *4 Maximum cutting speed 400 mm/s (16 inch/s) (1 to 40 cm/second in 40 steps) Cutting pressure Tool 1: Max. 4.9N (500 gf), in 40 steps Tool 2: Max. 9.8N (1 kgf), in 40 steps Minimum character size approx. 10 mm square (varies with the character font and media) Mechanical resolution 0.0025 mm (2.5μm) Programmable resolution GP-GL mode: 0.1/0.05/0.025/0.01 mm HP-GL™ *5 : 0.025 mm Distance accuracy Max. 0.1% of the distance moved or 0.1 mm, whichever is lager *6 Perpendicularity Max. 0.5 mm / 900 mm Repeatability Max 0.1 mm *6 Standard interfaces RS-232C, USB2.0 (Full speed) Buffer memory 2 Mbyte Command sets GP-GL and HP-GL™ *5 emulation (selected by menu) Number of tools 2 tools Cutter blade, pen, and tool types Cutter blade: supersteel Pens: Water-based fiber-tip pen, oil-based ballpoint pen Creasing/scoring tool Others ARMS (Advanced Registration Mark Sensing System), Reverse-side cutting and creasing with ARMS, Copy function, Creasing function, Repeatedly cut function Power supply 100 to 240 VAC, 50/60 Hz (Auto switching) Power consumption Max. 120 VA Operating environment Temperature: +10 to +35 degree C (44 to 95 degree F) , Humidity: 35 to 75% RH (non-condensing) Guaranteed accuracy environment Temperature: +16 to +32 degree C (55 to 90 degree F), Humidity: 35% to 70% RH (non-condensing) External dimensions (W x D x H) *7 920 x 1285 x 857mm *8 (36.2 x 50.6 x 33.7 inch) 1568 x 1285 x 944 mm *8 (61.7 x 50.6 x 37.2 inch) 2068 x 1285 x 944 mm *8 (81.4 x 50.6 x 37.2 inch) The table cannot be tilted The table cannot be tilted 1568 x 987 x 1687 mm *9 (61.7 x 38.9 x 66.4 inch) The table cannot be tilted Weight approx. 58 kg *10 (128 lbs.) approx. 69 kg *10 (152 lbs.) approx. 74 kg *11 (163 lbs.) Compatible OS Windows 10 / 8.1 / 8 / 7 / Vista, Macintosh OS X10.6-10.10 *11 Certifications UL , cUL , CE making, FCC-A, EN55022-A, RoHSCling

Minimum Order: 1 bags

Product Description Printing Technology Dual advanced PrecisionCore® TFP® 10-channel, drop- on-demand, inkjet printhead with ink-repelling coating technology Maximum Print Resolution 1440 x 720 dpi Print Speed Speed: up to 1,169 sq ft/hr Sports apparel: up to 568 sq ft/hr Fashion/signage: up to 1,004 sq ft/hr Minimum Ink Droplet Size Variable Droplet Technology Ink Type UltraChrome DS6 ink technology; 5-color Ink Configuration C, M, Y, HDK, Fy, Fp Replacement Ink UltraChrome DS Ink High Density Black Ink Packs (T46C820) Cyan Ink Packs (T46C220) Magenta Ink Packs (T46C320) Yellow Ink Packs (T46C420) Fluorescent Pink Ink Packs (T46C520) Fluorescent Yellow Ink Packs (T46C620) Operating Systems Windows® 10 and 8.1 System Requirements Minimum PC Requirements: 2GHz CPU, 2GB RAM, 120GB HDD, DVD-ROM or Internet connection Recommended PC Specifications: 3GHz or higher quad-core CPU, 8GB RAM, 500GB SSD, and high-speed Internet connection Temperature Operating (recommended): 59 ˚ to 77 ˚F (15 ˚ to 25 ˚C) Operating: 59 ˚ to 95 ˚F (15 ˚ to 35 ˚C) Humidity Operating (recommended): 40 – 60% (no condensation) Operating: 20 – 80% (no condensation) Sound Level Less than 59 dB(A) according to ISO 7779 Dimensions 103" x 37" x 53" (2,620 mm x 934 mm x 1,332 mm) (W x D x H) Weight 639 lb (290 kg) Eco Features Epson UltraChrome DS Ink is certified by ECO PASSPORT by OEKO-TEX®, meaning it’s safe for adults, children, and babies. RoHS compliant Epson America, Inc. is a SmartWay® Transport Partner Recyclable product Country of Origin China Warranty Standard 1-year limited warranty. Optional Epson Service programs available for a total of 3 years of coverage. Ink Supply System Ink Supply Fill Volume: 3,000 mL each x CMYHDK2 2,000 mL each x FyFp2 In-box Ink Fill Volume: 2,000 mL each x CMYHDK2 1,000 mL each x FyFp2 Ink Shelf Life: 2 years from printed production date. Printer is designed for use with Epson ink packs only, not third-party ink systems. Printable Area and Accuracy Maximum Paper Width: 64" Minimum Paper Width: 11.8" Maximum Printable Width: Up to 63.6" Sheet Media Handling Left/Right Margins: 0.20" (0.40" total) Roll Media Handling Single Roll-to-Roll / Top-loading Roll: 64" wide Media Core: 2" or 3" core diameter Maximum Roll Diameter: Up to 9.8" Maximum Roll Weight: Up to 100 lb Media Thickness: From 45 gsm to 1 mm thick Take-up Reel: Fully automatic “wind in” or “wind out” with tension control Printer Language Epson ESC/P® raster Interfaces Hi-Speed USB 2.0 (1 port) 1000Base-T Ethernet (1 port) Power Rated Voltage: AC 100 – 120 V; 200 – 240 V Rated Frequency: 50 / 60Hz Rated Current: 10.0 A at 100 – 120 V, 5.0 A at 200 – 240 V Power Consumption: Printing: approx. 570 W or less Standby Heaters On: 340 W Power Off: approx 1.0 W Sleep Mode: approx 17 W Power Requirements Requires two outlets

Minimum Order: 1 bags

Product Description PRODUCT HIGHLIGHTS 2400 x 1200 dpi Media up to 31.4 mil Thick Borderless, Roll Printing up to 60" Wide Ethernet 640 MB Internal Memory Embedded 250 GB Hard Drive Replace Ink Cartridges During Printing Photoshop, DPP, MS Office Print Plug-ins Printing Method Printing Technology Inkjet printer with non-firing nozzle detection and compensation Maximum Resolution 2400 x 1200 dpi Minimum Ink Droplet Size 4.0 pl Ink Type LUCIA EX Ink (Pigment based) Ink Palette Cyan, Photo Cyan, Magenta, Photo Magenta, Yellow, Black, Matte Black, Red, Green, Blue, Gray, Photo Gray Ink Cartridge Configuration 12 individual cartridges Ink Cartridge Capacity 11.16 or 23.67 fl oz (330 or 700 ml) per color Compatible Ink Cartridges PFI-306 MBK Matte Black PFI-306 BK Black PFI-306 C Cyan PFI-306 M Magenta PFI-306 Y Yellow PFI-306 PC Photo Cyan PFI-306 PM Photo Magenta PFI-306 R Red PFI-306 G Green PFI-306 B Blue PFI-306 GY Gray PFI-306 PGY Photo Gray PFI-706 MBK Matte Black PFI-706 BK Black PFI-706 C Cyan PFI-706 M Magenta PFI-706 Y Yellow PFI-706 PC Photo Cyan PFI-706 PM Photo Magenta PFI-706 R Red PFI-706 G Green PFI-706 B Blue PFI-706 GY Gray PFI-706 PGY Photo Gray Number of Nozzles 2,560 nozzles per color 30,720 nozzles total Nozzle Pitch 1200 dpi Paper Handling Paper-Feed Method Roll Feed: 1 Roll, front output Sheet Feed: 1 sheet, manual feed, front output Paper Types Plain, Coated, Photo, Proofing, Art, Sign/CAD Paper Sizes US: Letter, Legal, Ledger, Super B, 13.0 x 22.0" (33.02 x 55.88 cm) ISO: A0, A1, A2, A2+, A3, A3+, A4, B0, B1, B2, B3, B4 JIS: B0, B1, B2, B3, B4 ANSI: C, D, E, F ARCH: A, B, C, D, E1, E2, E3 DIN: C0, C1, C2, C3, C4 US Photo 16.0 x 20.0" (40.64 x 50.8 cm) Poster: 20.0 x 30.0" (50.8 x 76.2 cm), 30.0 x 40.0" (76.2 x 40.64 cm), 42.0 x 60.0" (106.68 x 152.4 cm), 44.0 x 62.0" (111.76 x 157.48 cm), 50.0 x 70.0" (127.0 x 177.8 cm), 54.0 x 76.0" (137.16 x 193.04 cm), 60.0 x 84.0" (152.4 x 213.36 cm) Other: 8.0 x 10.0" (20.32 x 25.4 cm), 10.0 x 15.0" (25.4 x 38.1 cm), 10.0 x 12.0" (25.4 x 30.48 cm), 12.0 x 16.0" (30.48 x 40.64 cm), 14.0 x 17.0" (35.56 x 43.18 cm), 18.0 x 22.0" (45.72 x 55.88 cm), 20.0 x 24.0" (50.8 x 60.96 cm) Custom: 8.0 x 8.0 to 60.0 x 63.0" (20.32 x 20.32 to 152.4 x 160.0 cm) Roll Width: 10.0 to 60.0" (25.4 to 152.4 cm) Roll Print Length: Up to 59.1' (18.0 m) Borderless Printing Width 10.0" (25.4 cm), 14.0" (35.56 cm), 17.0" (43.18 cm), 24.0" (60.96 cm), 36.0" (91.44 cm), 42.0" (106.68 cm), 44.0" (111.76 cm), 50.0" (127.0 cm), 60.0" (152.4 cm) JIS B2 (20.28" / 51.5 cm), JIS B0 (40.55" / 103.0 cm), ISO A1 (23.39" / 59.4 cm), ISO A0 (33.11" / 84.1 cm) Media Weight 70 to 470 g/m2 Media Thickness 2.8 to 31.0 mil (0.07 to 0.8 mm) Maximum Media Roll Diameter 6.0" (15.24 cm) Core Size 2.0, 3.0" (5.08, 7.62 cm) Connectivity Interfaces High-Speed USB 2.0 10 / 100 / 1000 Base-T / TX Ethernet Network Protocols IPX / SPX, SNMP (Canon-MIB compatible), HTTP, TCP / IP, AppleTalk OS Compatibility Windows: XP, Vista (32 / 64-bit) Windows 7 (32 / 64-bit) Macintosh OS X Input Buffer 640 MB Hard Drive Capacity 250 GB Printer Language GARO Physical Control Panel LCD LEDs Message, Roll Media, Cut Sheet Media Buttons: Power, Menu, OK, Stop, Navigate, Back, Cut, Feed, Load, 4 directional arrows Power Requirements 100 to 240 VAC (50 to 60 Hz) Power Consumption Maximum: 190.0 W Standby: ≤ 6.0 W Power Off: ≤ 0.5 W Acoustic Noise Operation: ≤ 68 dB(A) Standby: ≤ 35 dB(A) Certifications International Energy Star Program (worldwide), Law on Promoting Green Purchasing (Japan), GPN, RoHS directive, IT Eco Declaration (Europe), WEEE, U.S. presidential directives, J-MOSS (Green Mark), Chinese RoHS, ErP Lot6 (Europe) Temperature / Humidity Operating Temperature: 59 to 86°F (15 to 30°C) Operating Humidity: 10 to 80% Dimensions (WxDxH) 90.5 x 30.2 x 45.0" (229.87 x 76.71 x 114.3 cm) Weight 362.0 lb (164.2 kg) including stand Packaging Info Package Weight 562.0 lb Box Dimensions (LxWxH) 98.0 x 48.5 x 40.0"

Minimum Order: 1 bags

Applications 1. Wrinkle removal: fine lines, crow's feet, forehead lines, nasolabial folds, neck lines, etc. 2. Facial rejuvenation and beautification, skin regeneration, firming and lifting 3. Remodel fat and collagen, improve cellulite, improve stretch marks, and refine skin texture 4. Postpartum repair: (abdomen) stretch marks, (buttocks, legs) swelling marks 5. Skin rejuvenation: Improve uneven or rough skin texture, dull skin texture and make the skin rosy; shrink large pores 6. Scar removal: acne pits and acne marks, acne depression scars, burn scars 7. Treatment of acne: especially effective in the treatment of active acne; 8. Deodorization: treat underarm odor and armpit hyperhidrosis; 9. Regular skin maintenance. Crystallite-Depth-8 (11) Working Principle Crystal Depth 8 is a minimally invasive fractional treatment combining needles and RF energy.Under the control of the electronic system,dozens of insulated needles quickly penetrate the epidermis at the same time, emit RF energy from the needle tip, and then quickly exit the skin. RF energy is penetrated deep into the skin through tiny needles, causing tiny damage, penetrating and opening the absorption channel of the skin, so that nutritional products can enter the skin, and trigger the body's natural healing response. At this time, the thermal stimulation generated by RF together stimulates the self-repair mechanism of the skin, while liquefying and destroying fat cells, it shrinks a large area of soft tissue and stimulates the production of skin fibrous tissue and collagen, thereby reducing fat,remodeling and Tighten and lift the skin. In addition, RF can destroy the secretion of sebaceous glands, inhibit inflammation, eliminate acne bacteria, reduce oil secretion, significantly improve large pores, and effectively treat inflammatory acne, etc; for rough and loose skin, fine lines and wrinkles, acne marks, acne pits, and scars , Stretch marks and other different symptoms for personalized skin care. The penetration of Crystal depth 8 opens the fast absorption channel of the skin, and can directly introduce repair liquid, antioxidants and others into the deep layer of the skin, which can further play the role of active ingredients further deeply repair the skin, and realize the effect of 1+1>2 Purpose. Crystallite-Depth-8 (9) Crystallite-Depth-8 (10) While the system automatically releases energy, the "Explosive Mode" RFtechnology can instantly release energy at three different depths under the skin. Multi-level fixed-point superposition treatment, energy delivery is uniform and stable. Specialty of Crystallite Depth 8 1. Double handle design, wide range of treatment. 2. A variety of probe specifications: 12P, 24P, 40P, nano crystal head, more peace of mind without repetition. 3. Provide the deepest RF fractional therapy, which can penetrate subcutaneous tissue up to 8mm. 4. Realize humanized operation: the depth can be adjusted between 0.5and 7mm, the depth of the needle can be adjusted freely, and it can be used on skin of any thickness. 5. Original burst mode: deep segmented subcutaneous heating technology. multi- level fixed-point superposition treatment at one time, uniform and stable energy delivery. 6. Insulated probe device "super sharp + ultra-high gold plating film + cone design"; The needle body is 0.22mm, and gradually becomes thinner to the top. The damage to the epidermis caused by 0.1mm of the needle tip is the least. So as to avoid burning skin pigmentation and basically no pain and bleeding. Improved safety and effectiveness. 1711435350617 1711435382119 Crystallite Depth 8 OF TIPS: Crystallite-Depth-8 (12) Crystallite Depth 8 Resurfacing 12-pin Smaller mesh tip with 12 gold-coated microneedles. In mode Morpheus RF Prime is the ideal solution for small, hard-to-reach tissue areas. Crystallite Depth 8 24-pin Subcutaneous and dermal remodeling of facial tissue by segmented coagulation and sub-necrotic global heating. Crystallite Depth 8 body 40-pin Subcutaneous and dermal remodeling of larger body areas. It treats the abdomen, thighs and buttocks through segmented coagulation and sub-necrotic global heating. Crystallite Depth 8 Nano-pin Subcutaneous and dermal reshaping of small, hard-to-reach areas. By segmented coagulation and sub-necrotic global heating, it is suitable for the periorbital area, forehead, inner arms and delicate female areas.

Minimum Order: 1 bags

Applications 1.Shoulder pain, Calcific tendonltis; 2.Radial or ulnar humeral epicondylitis; 3.Trochanteric tendonitis; 4.Waist or stern pain; 5.Patellar tendonitis; 6.Tibial stress syndrome; 7.Achillodynia; 8.Plantar fasciitis; 9.Broken fat, cellulite removal Working Principle Extracorporeal Shock Wave Therapy (ESWT) involves the conversion of a sound wave into a shock wave that is applied repeatedly to a specific area of the body. The technique is similar to lithotripsy, which is used to treat kidney stones. ; There are several theories about how this treatment works but the most accepted theory is that the micro-trauma caused by the repeated shock waves increases the blood flow to the area and this promotes healing. The treatment is simple, quick and non-invasive. During Extracorporeal Shock Wave Therapy, a high-intensity sound wave is transmitted from a probe through the skin where it interacts with the tissues of the body. This leads to a cascade of beneficial effects such as increased blood flow and metabolic activity to the area, reversal of chronic inflammation,stimulation of collagen and dissolution of calcium build-up. Stimulation of these biological mechanisms creates an optimal healing environment. As the injured area is returned to normal, functionality is restored and pain is relieved.

Minimum Order: 1 bags

Applications Pneumatic ballistic shock wave instrument is compressor generated pulse sound waves into precise ballistic, compare with the electromagnetic shock wave, more energy generated max to 6 bar. And also impact faster, configuration higher and more expensive. Working Principle Most men suffering from erectile dysfunction have vascular problems affecting the vessels that supply blood to the cavernous bodies of the penis, resulting in a decreased ability to develop and maintain an erection. Shockwave Therapy for ED of this type can be a highly effective treatment. The shockwaves are focused onto the area to be treated creating new blood vessels in penile tissue, enabling patients to achieve and maintain firm spontaneous erections. Shockwave therapy is a multidisciplinary device used in orthopaedics, physiotherapy, sports medicine, urology and veterinary medicine. Its main assets are fast pain relief and mobility restoration. Together with being a non-surgical therapy with no need for painkillers makes it an ideal therapy to speed up recovery and cure various indications causing acute or chronic pain. QM-SW9+-8 QM-SW9+-9 Specialty of QM-SW9+ QM-SW9+ 1 QM-SW9+-2 QM-SW9+-3 QM-SW9+-4 QM-SW9 , +-5 QM-SW9+-6 Multiple waveforms flat form/focus form/radial form Tatal 11pcs heads more powerful deeper penetration Long lifetime Easy to change bullet Max to 6 bar max to 21Hz Upgrade software with ED therapy Smarter programing C and P mode 6 different preload Easier maintaining The upgraded handle and 12pcs tips More impacting head choices 6- 8-10-15-20-25mm diameter heads

Minimum Order: 1 bags

Specialty of QM-510 1. 10 Mega pixels with 4-time magnifier 2. Auto-focus; 3. Auto-analysis; 4. UV Voice system; 5. 3: 4 Preview system; 6. Front slant window; 7. Support multi-languages;

Minimum Order: 1 bags

Hifu High Intensity Focused Ultrasound Professional Face Lifting Machine Mini Hifu Cartridges Beauty Salon Equipment Anti-Aging Working Theory: High Intensity Focused Ultrasound (HIFU) directly delivers heat energy to skin and subcutaneous tissue that can stimulate and renew the skin's collagen and thus consequently improving the texture and reducing sagging of the skin. It literally achieves the results of a facelift or a body lifts without any invasive surgery or injections, moreover, an added bonus of this procedure is that there is no downtime. This technique can be applied to the face as well as the whole body, and also, it works equally well for people of all skin colours, in contrast to that of lasers and the intense pulse lights. HIFU machine is a non surgical and a non laser procedure that directs high intensity focused ultrasound, also known as HIFU knife into the deep skin layer in order to gently heat the tissue to lift and tighten aged skin without any incisions of disrupting skin surface. HIFU technology is able to transfer the heat energy into 3-4.5mm under the surface of the skin. It will heat the SMAS up to 60-70 temperature the raises thermal coagulation point which accelerates skin rejuvenation process and maximizes tightening effect of the skin layer. How it works? Advanced High Intensity Focused Ultrasound(HIFU) adopts technology which is not like lasers, radio frequency, surgery and other technologies, HIFU is non- surgical. HIFU steer around the surface of the skin to deliver the precise and fractional of ultrasound energy at the right depths(i.e.3.0mm/ 4.5mm SMAS layer) without damaging or disrupting the epidermal tissue of skin and the right temperature 65~70ºC.This energy stimulates the new collagen to reproduction, which rejuvenates the skin leading to a more youthful and bright or to sharpen contouring. HIFU is especially suitable for treating sagging skin with reasonable thickness as well. Machine Advantages: 1. Non-Invasive treatment both for face and body with different cartridge; 2. Adopts HIFU technology, the temperature of focused ultrasound can reach 65 ºC to 100 ºC; 3. Security control system can distinguish different cartridge automatically; 4. Special Cartridge connect method make sure no energy loss during the treatment; 5. Professional mode with free setting parameter and memory function for saving data; 6. Smart mode with limited energy and preseted parameters for simple and safe treatment; 7. Uniform energy distribution brings better clinical effect and quickly treatment; 8. Cartridge with long life span of 10,000 shots; 9. HIFU-Q3 has 2 extra transducer 8mm and 13mm,which give you an option for body treatment: body tightening ,lifting and slimming. Technical Specifications: Model HIFU-Q3 Machine Type Anti-wrinkle Machine Operation principle Ultrasonic Voltage Input AC220V-230V/50-60HZ AC100V-110V/50-60HZ Output Power 0.1~2.0J(0.1J/step) Space Range 1.0~4.0mm(0.5mm/step) Length 5.0~25mm(1.0mm/step) Screen Size 15" TFT LCD touch screen HIFU Cartridge 3 heads for standard:1.5mm, 3.0mm, 4.5mm; 2 heads for optional: 8mm,13mm. Cartridge Shots 10,000shots/catridge(20,000shots for option) Gross Weight 20.0KG Packing Size(size) 480*570*550 mm HIFU Cartridges: 1. DS-4.5mm: To transmit high- energy focused ultrasound to the skin, subcutaneous tissue, the ultrasound to penetrate the skin to a depth of 4.5mm, direct subcutaneous SMAS layer, forming "heat coagulation" regional, targeted to thicker skin, such as cheeks, etc. 2. DS-3.0mm: To transmitting high frequency into the dermis layer of the skin tissue,the ultrasound to penetrate the skin to a depth of 3.0mm,is responsible for activating the skin's dermal layer of collagen,effectively enhance the effect of the consolidation of the outline,but also improve large pores and reduce the appearance of wrinkles. 3. DS-1.5mm: To transmit high-energy focused ultrasound to the epidermis tissue,the ultrasound to penetrate the skin to a depth of 1.5mm,is responsible for activating the skin epidermis in thinner tissue. 4. DS-8.0/13.0mm: To transmit high intensity focused ultrasound activating in depth of 8.0mm/13.0mm. targeted to thicker skin, such as thighs, buttocks.

Minimum Order: 1 bags

Common Rail Injector Repair Kits 0445110249 #Common Rail Injector Repair Kits 0445110250# #Common Rail Injector Repair Kits 095000-5215# #Common Rail Injector Repair Kits 095000-5224# (8AU) Whats--App 86--1--3--3--8--6--9--0--1--3--1--5 Doney----(a , t)----china-lutong---(dot)----net What is the purpose of the injector valve on a generator? The fuel injector of a diesel generator is an important component in the fuel supply system of a diesel engine to achieve fuel injection. Its function is to atomize the fuel into fine droplets according to the characteristics of the diesel engine mixture and inject it into the specific combustion chamber.

Minimum Order: 6 gallons

Oasis Bowling is committed to providing the highest quality bowling accessories and equipment. We use only the finest materials and strict quality control measures to ensure our products meet the highest standards. We offer a wide range of bowling accessories and equipment to suit every need. Whether you're a bowling center or a bowling distributor, Oasis Bowling has the perfect product for you. With our OEM services, you can customize your bowling parts with your own material. This is a great way to promote your brand or team while enjoying a personalized bowling experience.

Minimum Order: 2 barrels

Bowling Parts ANGLE BRACKET, ACCL MOTOR GS 47-031307-004 for Brunswick mach We are committed to providing the finest quality 47-031307-004 bowling accessories and equipment for your bowling alley needs. Our range of products, including bowling balls, bowling pins, bowling shoes, and installation services, are designed to enhance the overall bowling experience, ensuring maximum fun and excitement for your patrons. 000 021 417 Idler Roller Assembly 000021417 000-021-417

Minimum Order: 2 barrels

Disposable Bamboo Charcoal Pet Pee Pads 071107 071108 Product Details: 1.Upgrade the process to absorb water and prevent leakage. 071109 2.Bamboo charcoal technology, antibacterial and deodorizing. 071112 3.5-layer process to block leakage. 071110 Product Specification: Product Name Bamboo Charcoal Puppy Pad Feature Sustainable Appli , cation Dogs Material Non-wove , n Fabric,Wood Pulp,Toilet Paper,Polyester, PE Stretch Film, Bamboo Charcoal Product name Puppy Training Pad Deodorization Type Colors Balck Surface+White Bottom Function Train Dogs,Cleaning,Deodorization Size S Size 33*45cm, M Size 45*60cm, L Size 60*90cm Absorption 400ml, 800ml, 1600ml Packing Plastic Bag+Carton Suitable for Dogs Cats Animals Weight S Size 19g, M Size 37g, L Size 77g OEM OEM Service Accepted

China qingdao factory PDLC E7 QYPDLC-193 RM82 1,4-BIS-[4-(6-ACRYLOYLOXYHEXYLOXY)BENZOYLOXY]- , 2-METHYLBENZENE 125248-71-7 RM82 C39H44O10 HPLC: 95% MIN. More than 18 years of PDLC liquid crystal production experience. Qingdao QY Liquid Crystal Co., Ltd. is a professional manufacturer and exporter of liquid crystal,PDLC material, liquid crystal monomer,LC single, Nematic liquid crystal, especially polymer dispersed liquid crystal,PDLC

Minimum Order: 20 square metres

1. Product Introduction The graphite digestion system is an instrument used for sample pretreatment in chemical analysis. It is mainly used to dissolve organic and inorganic substances in solid samples into solutions for subsequent analysis and measurement. It heats the sample in a surrounding heating method, effectively increasing the utilization rate of thermal energy. At the same time, it occupies the front end of conventional digestion equipment with its advantages of higher temperature control accuracy, small differences between holes, fast digestion, energy saving and environmental protection. It can adapt to various types of samples, including soil, water, plants, food, etc. Graphite digesters are widely used in environmental monitoring, food safety, geological exploration and other fields. It can process samples quickly and efficiently and provide accurate and reliable analysis results. 2. Graphite digester parameters Model: BZH-R-XJ Temperature control range: room temperature-220℃ Temperature control accuracy: ±0.1℃ Heating material: graphite + Teflon anti-corrosion coating Number of sample holes: 16, 24, 36, 48, 54, 63, 100 (can be customized according to customer requirements) Control and display mode: PID temperature control digital display Power supply: 220v/50Hz Supporting products: PTFE digestion tube, PFA digestion tube web: https://www.njbinglab.com Phone/Whatsapp/ Wechat :+8615805176994 Mail: rossnjbzh@gmail.com / rossg@njbinglab.com