Offers to Sell

PSA Nitrogen generator with high purity 99.99% for foodstuff storage PSA Nitrogen generators have become the preferred source of producing on-site Nitrogen gas. Nitrogen plants based on Pressure Swing Adsorption (PSA) technology are very reliable and give many years of trouble free operation. Nitrogen Generator Usage: Food and beverage industries Aircraft & motor vehicle tires Chemical and petrochemical industries Electronics industry Metallurgy / heat treatment Pharmaceutical industry Glass and lighting industry Oil & Gas --------------- ------------------- Adva , ntage * Most reliable technology * More advanced and more economical air separation modules. extremely low power consumption * Simple engineering design, Less components = lower maintenance cost * Automated Operation. * Turn-key solution and pre-commissioned. * Skid mounted design, easy installation. * Durable Molecular Sieve and Steel Structures ensures longer life. * We take the one-on-one service mode , one customer--one saler--one engineer for every set of nitrogen generator . Principles: It uses carbon molecular sieve as sorbent, produces nitrogen by making use of the PSA principle. Under certain pressure, carbon molecular sieve has different oxygen/nitrogen adsorption capacity, i. E. Much more oxygen adsorption capacity than nitrogen adsorption capacity. PLC controls pneumatic valve open/close to realize two towers alternate adsorption and desorption as per pressure change, carries out oxygen/nitrogen separation and produces nitrogen with desired purity. Applications: 1. Metallurgy: For anneal protection, agglomeration protection, nitrogenizing, furnace washing and blowing, etc. Used in fields such as metal heating treatment, powder metallurgy, magnetic material, copper process, metallic mesh, galvanized wire, semiconductor, etc. 2. Chemical and new material industries: For chemical material gas, pipeline blowing, gas replacement, gas protection, product transport, etc. Used in fields such as chemical, urethane elastic fiber, rubber, plastic, tyre, polyurethane, biological technology, intermediate, etc. 3. Electronic industry: For encapsulation, agglomeration, anneal, deoxidization, storage of electronic products. Used in fields such as peak welding, circumfluence welding, crystal, piezoelectricity, electronic porcelain, electronic copper tape, battery, electronic alloy material, etc. I, Nitrogen generation system 1. Compressed air system Air compressor supply the raw material air for the nitrogen generator. The nitrogen making system need high quality,stable pressure and enough air consumption.Air compressor should use the reliable, maintenance easily,low noise,screw air compressor. 2. Pressure Swing Adsorption Nitrogen making system Pressure swing adsorption (PSA) is an advanced gas separate technique,it is widely used in gas supply field in the world. 2 .1 Adsorbing material Adsorbing material is the center part of PSA nitrogen generator,Normally use the the Carbon Molecular Sieve,it can adsorb the oxygen,CO2,water in the air,but can’t adsorb the nitrogen. 2.2 PSA principal Because O2 and N2 these two gas molecule have diffusion rate difference on the molecule sieve surface,O2 smaller diameter can diffuse faster,most of them inlet micropore of CMS,the large diameter N2 diffuse slowly,less of them can inlet ,use this adsorption difference come true O2 and N2 separate. 2.3 PSA N2 making processing (1) Inlet air:The air compressor press the air into transporting pipe,then use the compressed air clarification system to remove the water,oil,dust and so on,reach to air buffer tank,then pass through air buffer tank into two adsorption tower. (2) Adsorption: When air inlet adsorption tower,during the pressure function,O2 and CO2 be adsorbed quickly.Formed N2 near the outlet position. (3) Air outlet :When the adsorption process working in the best status(Adsorption N2:O2 is the smallest),open the outlet valve,transport the N2 into N2 buffer tank. (4) Average pressure:After finished exhaust,rest some N2 in the tower,so let it into another tower adsorb again with new air.This process is finished when the pressure of two tower is the same,so called average pressure. (5) Exhaust :After average pressure finished,need to releasing the air which adsorb by CMS to be ready for next adsorption,the programme will open the air releasing valve automatically,let the pressure in the tower back to the original status,meanwhile release the O2,CO2,so than the CMS can adsorb new air again. (6) These two tower exchange work can got N2 purity 99.9 % 3. Fully intelligent, automated, easier to operate Microcomputer control and (industrial computer system) touch screen control are built in the machine. From the microcomputer touch screen, we can understand the nitrogen generator as follows: (1) Real-time working condition, total running time, working process and opening and closing statement of the valve. (2) When operating, just need to turn on and off the machine, set the parameters and view the system fault information through the touch screen. It truly realizes the unattended duty, intelligent and automated operation of the equipment. It can function as the real-time monitoring equipment of the user’s control room. If required, we can monitor distantly parameters such as the flow of finished nitrogen, purity, pressure in the user’s DCS system.

YIHUA 8858 BGA Soldering Rework Station 110V 220V Portable Hot Air Gun Digital Hot Air Blow Dryer Heat Gun Soldering Station Specification: Input voltage: 110V,220V~240V Output Power: 700W Temperature range: 100~480 Celsius Temperature Stabillty: Good Display mode: LED Display Airflow type: Brushless-Motor Fan Airflow: 120L/min(MAX.) Handle size: L260 x W135 x H8MM ±3MM Weight : 0.7Kg Operation temperature: 0~40°C/32~104°F Storage temperature: -20~80°C/-4~176°F Storage Humidity: 35%~45% Operation attention: First time to operate the machine, should put the air gun on the holder to star up the machine. This is the our Factory protection Settings. Because the product appearance is being upgraded, so two random shipments.

Minimum Order: 1 bags

WDS-700 BGA Rework Station are widely used to replace and repair the BGA chip in laptop, mobile phone, The main user is repairing shops and factory to provide the after-sales service and rework. How to separate BGA chip from motherboard / How to replace a new BGA chip Repair steps 1.Separate the BGA chip from mother board -we called desoldering 2.Clean Pad 3.Reballing or replace a new BGA chip directly 4.lignment/Positioning -Depend on experience ,silk frame ,optical camera 5.replace a new BGA chip - we called Soldering

Minimum Order: 1 bags

3 In 1 wireless charger 36W fast charging station case-friendly for Apple Android series. Multiple Fast Charging Dock Stand For AirPods Lightning Type-c Micro USB Port Phones for Almost All Mobile Devices, such As iPhone, iPad, Samsung, Lg, Htc, Huawei, Sony Smart Phones, iWatch 5/4/3/2/1 and Airpods/Airpods Pro. Specification: 1. 3-in-1 wireless charger(double coil) for Android series. Model: TW-199. Power: 36W. Interface: USB-C, POW-DC. Input: DC12V(12V3A power adapter). Phone output: 5W, 7.5W, 10W, 15W. Watch output: 2.5W. Headphone output: 3W. USB-C output: 5V 3A, 9V 2.22A, 12V 1.67A. Adapter: 12V-3A or higher. Sensing distance: 2-5mm Conversion efficiency: ≤72%. Material: PC+ABS fire retardant. Applicable equipment: Android series: wireless charging mobile phone watch headset etc. Product size: 165*80*125mm. Package size: 175*90*130mm. 2. 3-in-1 wireless charger(Magnetic coil) for Apple series. Model: TW-299. Power: 36W. Interface: USB-C, POW-DC. Input: DC12V(12V3A power adapter). Phone output: 5W, 7.5W, 10W, 15W. Watch output: 2.5W. Headphone output: 3W. USB-C output: 5V 3A, 9V 2.22A, 12V 1.67A. Adapter: 12V-3A or higher. Sensing distance: 2-5mm Conversion efficiency: ≤72%. Material: PC+ABS fire retardant. Applicable equipment: Apple series: wireless charging iPhone, iWatch, iPods, etc. Product size: 165*80*125mm. Package size: 175*90*130mm. Main Features: 1. 3 in 1: 36W High Power wireless charging station support Mobile Phone and Watch/Bluetooth Headset Wireless Charging Simultaneously. Speed up 50%, Save 30 Minutes. 2. Safe Charging: Built-In Safeguards Against Overcharge, Overcurrent And Overvoltage Protection, Temperature Control, Foreign Object Detection, Fully Protect Your Phone And Apple Watch, Airpods Pro. 3. Case-friendly: The 3 in 1 wireless charging station are compatible with most cases up to 4mm. There’s no need to take off your case from your phone. 4. Widely Compatible: The Multifunctional Charging Stand Spport iPhone/Micro/Type-c Interfaces Can Charge For Almost All Mobile Devices, Such As Iphone, Ipad, Samsung, Lg, Htc, Huawei, Sony Smart Phones, iWatch 5/4/3/2/1 And Airpods/Airpods Pro.

Minimum Order: 1 bags

30 Ports USB Charging Station 160W charger with intelligent protection iPhone, iPad, Samsung, Smartphones, Tablets, Power Banks, ect. Multi Ports USB Charger Wall Adapter Power Supply USB Fast Charger Dock Station. Specification: Name: 30-Port USB Charger. Model: 830. Power: 160W. USB output: 5V 32A. Input voltage: AC 100-240V, 50-60HZ. Auto-identification: adaptive current and voltage. Heat dissipation method: 50 degree intelligent cooling fan on. Material: PC+ABS fire retardant. Product size: 150*77*70mm Package size: 169*124*75mm. Features: 1. Smart Charging Recognition: The family-sized desktop USB fast charger can charge 30 devices at the same time. More efficient, each USB interface is independent of each other and does not interfere with each other. 2. Multi-port USB charger: 30 ports, working efficiency reaches 80%, each port provides 5V/2.4A power, total output power is 160W. 3. 100% safe charging: Built-in smart chip to prevent over-voltage, over- current and overload. Safe and silent, the fan is double-passed to prevent overheating. 4. Overcharge protection, when these devices are fully charged, they will automatically cut off power without harming the machine. 5. Stable and safe, quality assurance, with CE, FCC, ROHS and other international certifications.

Minimum Order: 1 bags

BST-858D+ High Quality Soldering Desoldering Hot Air Gun Rework Station for iPhone/Smartphone Mobile Repair Tool - 220V EU Plug Specification: Model: 858D+ Item Name: Hot Air SMD Rework Soldering Station Brand Name: BEST Dimensions: 100*148*133mm Power Consumption: 650W±10 Temperature range:100~480℃ Weight: 1.7KG Certification:CE certificate Warranty:1 Year Feature:Temperature Adjustable Application: Heating,Soldering, Desoldering

Minimum Order: 1 bags

JCID BT01 battery fast charging board LCD display Type-C PD charger tester, real-time monitoring apple battery voltage health data, realize fast battery charging. Features: 1. Quickly detect iPhone battery, voltage, health data. 2. Type-C interface input, supports PD fast charging. 3. LCD display, real-time monitoring of battery charging data. 4. Simulates the iPhone battery charging scheme to truly realize fast battery charging.

Minimum Order: 1 bags

RELIFE RL-304M 160W Intelligent High Power 30-port Charging Master USB Smart Socket For Safe Charge 30 Devices At The Same Time. Features: 1. The total output 160W high-power charger provides strong expansion power, supports 30 ports to be used at the same time, and saves time and trouble for charging. 2. Built-in PWM power management chip, intelligently adjust the voltage and current output, safe charging without hurting the battery. 3. With a powerful radiator, the heat dissipation is more thorough, using a silent fan, no abnormal noise and no noise. 4. Small and not taking up space, compatible with all USB charging problems,Suitable for home/office. Specification: BRAND: RELIFE PRODUCT NAME: Intelligent high power 30 port charging master MODEL: RL-304M NET WEIGHT About: 550g GROSS WEIGHT About: 720g PRODUCT SIZE: 77*70*150mm PACKAGE SIZE: 126*75*169mm INTERFACE TYPE USB-A*30 ENTER AC: 100-240V50-60Hz OUTPUT SPECIFICATION: 30 USB OUTPUT POWER USB: 5V1A-2.4A TOTAL OUTPUT POWER: 160W(MAX)

Minimum Order: 1 bags

Hot air heater and welding iron 2in1 rework soldering station. Dual LCD digital displays to show precision temperature. Extremely low noise and space saving design. Intelligence self-detection function features safe personal operation. Automatic cooling function for effectively prolonging the heater's life and protecting the hot air heater. Specification: Hot Air Heater Working Voltage: AC220-240V OR AC100-130V Frequency: 50Hz/60Hz Output Power: 750W Temperature Range: 100°C~480°C Temperature Stability:±2℃ Air Flow: 150L/min (max) Soldering Iron Working Voltage: AC220-240V OR AC100-130V Output Power: 80W Frequency: 50Hz/60Hz Temperature Range: 180°C-500°C Temperature Stability: ±1°C Soldering Iron : ESD design Heater Material : Ceramics

Minimum Order: 1 bags

MaAnt DianBa No.1 Multi-function 8-Port PD Charger for Mobile Phone Current Data Line Detection Restart Current Detection Short Circuit Repair Over Current Voltage Protection Quick Charge 3.0 Qi Wireless Fast Charging Station for Samsung iPhone Huawei. Features: Fast charging/Large screen/Color display. 10W wireless fast charging, adopt advanced wireless fast charging technology, bid farewell to the charging line, easy charging. 1.8-inch LED color screen real-time display and the charging detection status can be seen at a glance. Visible type fast charging, PD+QC3.0 fast charging, Farewell to mobile phone charging turtle speed. Multiple security protection: Voltage stabilizing protection/Overvoltage protection/Short circuit protection/Leakage protection/Overheat protection/Over discharge protection/Overvoltage protection/Overcurrent protection. Built-in intelligent management chip, intelligently adjusts voltage and current output, safely charges without damaging the battery. Thicker coil charges faster, speed up 60%, high-speed 10W charging, one step faster. The equipment has 6 high current charging ports and QC fast charging, PD 20W fast charging ports,10W wireless charging ports, etc charging port. With the mobile phone boot line, you can detect the boot voltage and current. Data line detection, smartphone data line is good or bad so that the bad line has nowhere to hide. Specification: Brand: Ant Xin/MAANT Model: Dianba NO.1 Input voltage: 110v-220v Output voltage: 5V Maximum current: 25A PD power: Max.22W Maximumport voltage: 5.1V Maximum currentof single port: 5A Volume: 102*100*88mm Product size: 102*100*88mm Package size: 105*132*95mm Net weight: 380g Gross weight: 490g Line length: 1.5m Package includes: 1 x Charger 1 x Power cable

Minimum Order: 1 bags

PRODUCT DESCRIPTION Electric Pole Line Hot DIP Galvanized Forged Steel Ball Clevis Eye Forging Galvanized Q-7, QP-7 Type Ball Eyes Advantage: 1, LJ Brand Since 1985, a professional power fittings solution brand 2, Belongs to Power China, one of the FORTUNE GLOBAL 500 3, Our customers from over 30 countries Overhead Line Fittings Ball Eyes is used for connecting the overhead line fitting strings with the insulator ball socket end, and supporting other fittings to form one insulator fitting string, and connecting the wire to the poles or towers. Socket Clevis Eyes is used for connecting the overhead line fitting strings with the insulator ball end end, and supporting other fittings to form one insulator fitting string, and connecting the wire to the poles or towers. • The product is made of hot-dip galvanized steel; • Meet the technical requirements o IEC 61284-1997 and conform to IEC 60120 coupling code 16,20 and 24 Technical data sheet Catalog No. Fig. (mm)Dimensions (kN) Rated Failure Load (kg) Weight h d φ d1 d2 L1 L2 Q-10N 1 152 16 14 17 33.3 51 55 100 0.7 Q-12N 1 165 18 14 17 33.3 68 55 120 0.8 Q-16N 1 185 20 14 21 41.0 75 60 160 1.5 Q-1ONP 2 152 19 14 17 33.3 51 55 100 0.9 Q-12NP 2 165 18 14 17 33.3 68 55 120 0.8 Catalog No. Ball Code (mm)Dimensions (kN) Rated Failure Load (kg) Weight H B φ D1 D H1 QPJ-07100 16 100 16 18 17 33.3 50 70 0.8 QPJ-10110 16 110 16 20 17 33.3 50 100 0.9 QPJ-12110 16 110 16 24 17 33.3 50 120 0.9 QPJ-16120 20 120 18 26 21 41.0 55 160 1.0 QPJ-21120 20 120 20 26 21 41.0 60 210 1.0 Catalog No. (mm)Dimensions (kN) Rated Failure Load (kg) Weight C C1 C2 M h WS-7 18 19.2 34.5 16 70 70 0.97 WS-10 20 19.2 34.5 18 85 100 1.20 WS-12 24 23.0 42.5 22 90 120 1.80 WS-16 26 23.0 42.5 24 95 160 2.60 WS-21 30 27.5 51.0 27 100 210 4.30 WS-30 38 27.5 51.0 36 110 300 5.70 WS-16G 22 23.0 42.5 24 95 160 2.64 WS-21G 24 23.0 42.5 24 105 210 3.50 WS-32G 32 27.5 51.0 30 110 320 4.80 WS-42G 36 32.0 59.0 36 120 420 5.60 WS-55G 40 36.0 67.5 42 140 550 11.0 Catalog No. (mm)Dimensions kN) Rated Failure Load (kg) Weight b C1 C2 h φ W-7A 16 19.2 34.5 70 20 70 0.82 W-7B 16 19.2 34.5 115 20 70 1.01 W1-10 18 19.2 34.5 85 20 100 0.90 W1-12 20 19.2 34.5 90 24 120 1.30 W-12 20 23.0 42.5 90 24 120 1.40 W-30 32 27.5 51.0 110 39 300 3.50 Hot DIP Galvanized Forged Steel Ball Clevis Eye Forging Galvanized Q-7 QP-7 Type Ball Eyes 0 About us POWERCHINA Henan Electric Power Equipment Co., Ltd. is a subsidiary company of Power Construction Cooperation of China (POWERCHINA), one of the FORTUNE GLOBAL 500. Professional customer service, product development, technical Support and after Sale Service. POWERCHINA Henan Electric Power Equipment Co., Ltd, covering an area of 84000 square meters, was established in 1958. POWERCHINA Henan Electric Power Equipment Co., Ltd has a total of more than 426 employees, including more than 128. engineers and technicians.

Product Description Industrial Ultrasonic Kitchen Commercial Kitchen Dishwasher Quick Details : Application: Outdoor, Hotel, Commercial, Household, Commercial Energy Saving Automatic Dishwasher Oscillator frequency:28KHz oscillator number:18 Washing method: Ultrasonic Washing Product name: Commercial Dishwasher Restaurant stainless steel dishwasher table Power (W):3500 Type:Freestanding Control Type: Semi-Integrated Style:Traditio , nal Housing Material:Stainless steel Power Source:Electric Certification:ce Features : 1 Imported motor (high efficiency / low energy consumption / low noise 2 Intelligent control chip (integrated smart chip opens smart work and life ) 3 water and electricity saving ( a less stressful way of working ) 4 360° up and down double spray (The circulating hot water forms a strong impact cleaning force through the uniquely designed groove ModelNo HZ-GP1500 Product Name Commerical Bubble Washer Size(mm) 1500*800*850 Material Full body made by stainless steel Processing method Auxiliary cleaning Water tank capacity(L) 250 Heating Power(kW) 6 Blower(kW) 0.55 cleaning method Vortex bubbling Washing temperature( C 40~55 power supply(V/Hz) 380V/3N/50Hz Total power(kw) 6.55 About Us: Guangdong Hengze Commercial Kitchen Equipment Co., Ltd.. was established in 2016 and located in Shunde Foshan, China. It is a leading enterprise in the commercial dishwasher equipment industry with strong technical strength and complete production lines. We are a professional manufacturer specialized in commercial dishwasher equipment with many years experiences. Now we have 4 main dishwasher products including hood type dishwasher, rack conveyor dishwasher and Long line conveyor dishwasher,Bubble Washing Machine . High quality is the most important point for us to make sure our final customers have perfect satisfied using experience. By now, we have cooperated with many Hotels, Schools, Company groups, Hospitals and Restaurants also we have exported our dishwasher into many countries out of China rely on the advantage of our competitive price, high quality, fast producing and delivery. Hengze has been committed to providing international standard quality commercial dishwasher products and one-stop solutions for all partners. We have the most advanced laser cutting machine, bending machine. From product development to production inspection, we have a complete set of quality control process. Also we have obtained CE ISO14001 ISO9001 certification. Selling well in all cities and provinces around China, the products are also exported to customers all of the world as the United States, Japan, Malaysia, Thailand, Singapore, Qatar, India, Africa, Kazakhstan and Saudi Arabia. We have an experienced products development team making sure to provide OEM/ODM service with high-quality. Whether selecting a current product from our catalog or seeking engineering assistance for your requirement you can talk to our customer service center about your sourcing requirements. We must provide you professional services with nice price, high quality and fast delivery.

Arc Small Swing Gate Product Specifications Product Images Document Number: Edition: A/2 Revision Time: 2022/8/29 Revised by: Product Parameters Dimensions: 1200*180*1020mm Box Material: Top Cover: stainless steel SUS304 foot 1.2mm Box: stainless steel SUS304 foot 1.0mm Swing Arm Material: 10MM Acrylic (Stainless steel elbow is optional) Channel Width: ≤830mm Places: It can be used for indoor/outdoor/semi-outdoor pedestrian/bicycle passages; Such as: primary and secondary schools/colleges/office buildings/hotels, residential quarters/factory parks/hospitals/enterprises and institutions/government halls/sports venues, etc. Product Line Drawings: Technical Parameters ◆Chassis Material: Austenitic stainless steel SUS304 ◆Internal Structure: Steel Frame Construction/Standard Stainless Steel Housing ◆Work Voltage: AC220V±10V ◆Driving Motor: DC brushless motor(24~36VDC) ◆Movement Structure: Horizontal helical gear anti-collision movement ◆Normal Work Life: Continuous opening and closing for more than 5 million times ◆Infrared Sensors: 4 pairs; 8 pairs can be selected ◆Working Environment Temperature: -35℃～75℃ ◆Relative Humidity: 0～90% (No condensation) ◆Communication Interface: RS232 serial port ◆Communication Protocol: MODBUS protocol ◆Working Speed of the Gate: ≤30 persons/min (The memory mode can be turned on) ◆Passing Time: passing time by swiping card: 10S (If no one passes within 10S: the gate will automatically close, and the time can be adjusted according to needs) Function Parameters Basic Functions ●Alarm Function: Sound and light alarm function. ●Anti-interference: To prevent the gate abnormal caused by electromagnetic and other external causes. ●Passage Mode Setting: Unidirectional passage, bidirectional passage and free passage can be set through the main control board keys. ●Anti-tailgating: To prevent the unpermitted situation of passing too many people at once. ● Anti-clamp Function: When the brake is in the process of closing, the brake will stop closing after detecting the anti-clamp signal. ●Self-reset. Pass right will be canceled if people do not go through within a set time, the default time is 10s, and the passage time can be set by switch. ●Access Control: The external port can be connected to a variety of biometric identification devices. ●The gate opens after power failure. ●Fault Detection: The control board can support fault type detection, fault cause analysis, and fault troubleshooting. ●Passing Indicator: Traffic status indicator light; the alarm function of overstay time in the channel can be set. Extensible Functions ▲Passing Mode △Normal: Normal passing mode. △Passing: automatic car/electric car/motorcycle passing mode. ▲Switch on/Switch off Delay: set the delay of switch off after the switch machine receives the switch off signal/set the delay of switch off after the pedestrian passes. The default value is 0 seconds. ▲Swipe Card in the Channel △Default Disable: Card swiping in the channel (in the inductive infrared region) is invalid △Allow: Swipe card verification is allowed in the channel. ▲ Whether the Trailing and Reversing are Blocked by Closing the Door △Not close: Reverse passage /tailgating (A swips the card, B passes) will not close the gate. △Close the gate and then open the gate: Reverse/trailing passage will close the gate first, and open the gate again after closing. △Not open after closing: reverse/trailing passage will close the gate, and will not open again after closing the gate. ▲Fire Linkage △Normally open mode: the gate maintains the open state; △ Normally closed mode: the gate maintains the switch state. ▲Passage Mode △Bidirectional passage,swiping card bi-directionally for people flow. △Bidirectional free passage, no credit card verification is required. △Unidirectional passage, unidirectional (A) swiping card, and the gate opens normally for people flow; reverse directional (B) swiping card is invalid, and the gate closes. △Unidirectional free passage, unidirectional (A) free passage, and reverse directional passing (B) require a swiping card verification. △Passing is prohibited, Bidirectional swiping card is invaild, and the gate enters the locked state. Features: Fast induction pass,Small footprint and powerful control panel Application Bus, Station,factories,Toilets, Library,etc Arc Small Swing Barrier Turnstile Gate Anti Interference For Subway Station 0

In recent years, garbage classification has been universally popularized throughout the country. The purpose is to increase the resource value and economic value of it. In the face of increasing garbage production and the deterioration of environmental conditions, how to maximize garbage resources and realize their highest value? At present, reducing the amount of waste disposal, along with improving the quality of the living environment is one of the urgent issues of common concern to countries around the world.

Minimum Order: 1 bags