Offers to Sell

This aluminum drain is a perfect set for bathrooms and kitchens. it is also usable in parking garages etc. this particular product can be used in two ways. one is simple and do not need anything. just put the face of drain up and it is done. another is usable by filling in with a piece of tile (which usually goes with the same as floor) it has protective layer against acid and chemical products. with insects' trap and p-trap and a basket

Minimum Order: 10000

This aluminum drain is a perfect set for bathrooms and kitchens. it is also usable in parking garages etc. this particular product can be used in two ways. one is simple and do not need anything. just put the face of drain up and it is done. another is usable by filling in with a piece of tile (which usually goes with the same as floor) it has protective layer against acid and chemical products. with insects' trap and p-trap and a basket

Minimum Order: 10000

This aluminum drain is a perfect set for bathrooms and kitchens. it is also usable in parking garages etc. this particular product can be used in two ways. one is simple and do not need anything. just put the face of drain up and it is done. another is usable by filling in with a piece of tile (which usually goes with the same as floor) it has protective layer against acid and chemical products. with insects' trap and p-trap and a basket

Minimum Order: 10000

This aluminum drain is a perfect set for bathrooms and kitchens. it is also usable in parking garages etc. this particular product can be used in two ways. one is simple and do not need anything. just put the face of drain up and it is done. another is usable by filling in with a piece of tile (which usually goes with the same as floor) it has protective layer against acid and chemical products. with insects' trap and p-trap and a basket

Minimum Order: 10000

lined tile-in saranic drain middle outlet model tda W30 Material: Aluminum Floor Slopped High Water Discharge P-trap Poppet & Junk Strainer Protective Layer to Stabilize Finishing Size from 30 cm 2 mm Aluminum Sheet for Top & 4 mm for Body

Minimum Order: 1000

lined tile-in saranic drain middle outlet model tda b30 Material: Aluminum Floor Slopped High Water Discharge P-trap Poppet & Junk Strainer Protective Layer to Stabilize Finishing Sizes from 20 cm to 200 cm Available 2 mm Aluminum Sheet for Top & 4 mm for Body

Minimum Order: 1000

Product introduction: Dipentaerythritol is also known as Di-Pentaerythritol, Dipenta,Di-PE, is a white octagonal crystal powder. As an important fine chemical intermediate, Dipentaerythritol is mainly used in the high class coating industry. Dipenta is often used to produce polyether, polyester, polyurethane, alkyd resin and photosensitive resin film. Specification: Items Dipentaerythritol 85% Dipentaerythritol 90% Di-pentaerythritol(Di-PE) % ≥85 ≥90 Mono-pentaerythritol % ≤5.0 ≤3.0 Tri-pentaerythritol % ≤10.0 ≤7.0 Ash Content % ≤0.10 ≤0.05 Moisture % ≤1.0 ≤1.0 Final Melting Point ℃ 205-224 205-224 Hydroxy Value % 37-40 38-40 Phthalic acid resin chromaticity/(Fe Co Cu standard color solution)No. ≤2.0 ≤1.0 Recommended Applications: Dipentaerythritol as an important fine chemical intermediate, it is usually regarded as the middle and high-end product of pentaerythritol, which is mainly used in high-end coating industry. Production of polyether, polyester, polyurethane, high-grade alkyd resin and photosensitive resin film. Double season advanced fat used in advanced aviation lubricating oil, low fat can be used as PVC plasticizer, in terms of photosensitive coating, acrylic ester can be used as a double season stainless steel color plate, advanced granite spray mask, has strong adhesive force, friction resistance, ageing resistance excellent performance. Packing: Net 20 kg per plastic woven bags Storage: Should be stored in a dry, clean, ventilated warehouse, not in the open air.

Minimum Order: 1 bags

General introduction to N-Methyl-2-pyrrolidone : N-Methyl-2-pyrrolidone (NMP) is an organic compound consisting of a 5-membered lactam. It is a colorless liquid, although impure samples can appear yellow. It is miscible with water and with most common organic solvents. It also belongs to the class of dipolar aprotic solvents such as dimethylformamide and dimethyl sulfoxide. It is used in the petrochemical and plastics industries as a solvent, exploiting its nonvolatility and ability to dissolve diverse materials. Product grades: Reagent grade Electronic grade Industrial grade Regular grade Applications: It is widely used as extraction agent for aromatic hydrocarbons, lubricating oil refining, synthesis gas desulfurization, etc., also used in industrial cleaning, etc Packaging: Net 200KG per drum; 16 MTS per 20'FCL Net 200KG per drum; 25.2 MTS per 40'FCL

Minimum Order: 1 bags

3A molecular sieve,sometimes also known as 3A zeolitemolecular sieve,is a kind of potassium-sodium aluminosilicate with LTA-type skeleton structure which is composed of silicon-oxygen and aluminum-oxygen tetrahedrons.The main crystal hole of the 3A molecular sieve is an eight-membered ring structure, and the crystal pore size is 3Å (0.3nm).This kind of Molecular Sieve is mainly used to adsorb water, and does not adsorb any molecule with a diameter larger than 3A. According to the characteristics of industrial applications, the molecular sieve 3A produced by Fulong has faster adsorption speed, more regeneration times, higher crushing strength and stronger wear resistance,which greatly improves the utilization efficiency of molecular sieves and prolongs the service life of molecular sieves.It is the first choice desiccant necessary for deep drying,refining and polymerization of gas and liquid phases in petroleum and chemical industries. 4A molecular sieve is a kind of potassium-sodium aluminosilicate with LTA-type skeleton structure which is composed of silicon-oxygen and aluminum-oxygen tetrahedrons.The main crystal hole of the 4A molecular sieve is an eight- membered ring structure, and the crystal pore size is 4Å (0.4nm).It can adsorb water, methanol, ethanol, hydrogen sulfide, sulfur dioxide, carbon dioxide, ethylene and propylene, but does not adsorb any molecule with diameter greater than 4A (including propane). Its selective adsorption performance for water is higher than that of any other molecule.It is one of the largest molecular sieves varieties in industry.It is widely used in the drying of gases and liquids, and also in the refining and purification of some gases or liquids, such as the preparation of argon. 5A molecular sieve, generally also known as calcium molecular sieve with an effective pore opening of 5 angstroms, can absorb any molecule smaller than this pore size. In addition to the functions of 3A and 4A molecular sieves, it can also adsorb C3-C4 normal alkanes, chloroethane, bromoethane, butanol, etc., and can also be used for the separation of normal isomers, pressure swing adsorption separation and the co-adsorption of water and carbon dioxide. 13X molecular sieve, also known as sodium X molecular sieve, is an alkali metal aluminosilicate with a certain alkalinity. With the pore size of 10A,13X molecular sieve can adsorb any molecules larger than 3.64A and smaller than 10A.It can be used for catalyst co-carrier, water and carbon dioxide co- adsorption, water and hydrogen sulfide gas co-adsorption. It is mainly used in the drying of medicine and air compression system, and has different specialty varieties according to different applications.With the highest theoretical capacity of the common adsorbents and very good mass transfer rates, 13X molecular sieve is also often used as high-capacity adsorbents which is widely used in cryopumping, drying of cracked gas, air separation, natural gas Processing, Petrochemical industry and catalysis of hydrocarbon Processing and air separation.

Minimum Order: 1 bags

With irritant smell,Monochloroacetic acid,industrially also known as Chloroacetic Acid,MCA or MCAA, is a colorless or slight yellow crystalline carboxylic acid which is produced by chlorination of Acetic Acid or Hydrolysis of Trichloroethylene using Sulfuric Acid and is highly soluble in water and organic solvents. Monochloroacetic Acid is mainly used in manufacturing a variety of products including carboxymethyl cellulose, CMC, Herbicides, Pharmaceuticals,Dyes,Cosmetics,Plastic Stabilizers,Anesthetics,Tranquilizers and Amphoteric Surfactants as fine chemical intermediates. Chemical Name: Monochloroacetic Acid Chemical Synonyms:Chloroacetic Acid,Chloroethanoic acid,MCA,MCAA,Mono chloroacetic Acid Chemical Family:Halo Carboxylic Acid, Formula:C2H3ClO2 Structural Formula:ClCH2COOH Molecular Weight: 94.497 EINECS: 201-178-4 Flash Point : 71.5 ℃ Density: 1.58 g/cm³ Grades Available: Monochloroacetic acid 97.5%,Monochloroacetic acid 98%,Monochloroacetic acid 98.5% and Monochloroacetic acid 99%. CAS NO.: 79-11-8 UN NO.: 1751 Hazardous Class: 6.1+8 Industrial Standard: HG/T3271-2000 Specifications of the Monochloroacetic acid Items Specifications of Moochloroacetic Acid Superior grad First grade Qualified grade Appearance Colorless or slightly yellow crystalline powder or flake Chloroacetic Acid content % 99.0 min 98.0 min 97.50 min Dichloroacetic Acid content % 0.50 max 1.0 max 1.50 max Acetic Acid content % 0.50 max 0.50 max 1.0 max Crystallization oC 60 min 60 min 60 min Package: Monochloroacetic acid is available both in 25 kg or 50 kg Plastic PE film-lined and PP woven bag.

Minimum Order: 22

Product Name: Tetrahydrophthalic anhydride,THPA Chemical Name: cis-1,2,3,6-Tetrahydrophthalic anhydride,Tetrahydrophthalic anhydride,cis-4-Cyclohexene- 1,2-dicarboxyl , ic anhydride, THPA. CAS No: 935-79-5,85-43-8 Formula:C8H8O3 Formula Weight: 152.16 Properties: Tetrahydrophthalic anhydride is soluble in benzene and acetone and it is also sensitive to moisture. Specific Gravity: 1.20 Specification: Appearance white flakes/powder Purity ≥99.0% Chromaticity ≤80# (Pt-Co) Melting Point 100.0±2.0℃ Package: 25 kg plastic woven bags or paper bags,500kg plastic woven bags. Applications:Tetrahydrophthalic anhydride is also called as THPA as a anhydride hardener mainly used in the fields of oatings,epoxy resin curing agents,polyester resins,adhesives,plasticizers,pesticides,etc.< , br> Cautions: Store in cool,dry places and keep away from fire and moisture.

Minimum Order: 1 bags

Name: Methyltetrahydrophthalic anhydride, MTHPA. CAS No: 11070-44-3 or 26590-20-5 Formula: C9H10O3 Formula Weight: 166.17 Methyl Tetrahydrophthalic Anhydride (MTHPA) is a versatile liquid anhydride hardener. The product remains liquid in cold environments (typical pour point -20c to -15c). It provides unique characteristics to epoxy cured materials. MTHPA often is the product of choice in high voltage and temperature resistance environments. The characteristics of MTHPA also provide for excellent flexibility and strength properties. Markets using MTHPA include marine, composites, windmill blade coatings, construction, insulating, medical and sporting equipment. Application: Epoxy resin curing agents, Epoxy Harnener,solvent free paints, laminated boards, epoxy adhesives, etc. With the many advantages, e.g. long-term storage at room temperature, low freezing point, small volatilization and low toxicity, MTHPA is widely used in electric machines, dry-type transformers, high voltage switches, mutual inductance equipments, horizontal output transformers, household appliances capacitors, power capacitors and resistances, and the impregnating, casting and wrapping of integrated circuits. Specification: Items Methyltetrahydrophthalic anhydride Appearance slightly yellow liquid Anhydride 41% Min Volatile Content 1.0% Max Free Acid (mgKOH/g) 1.0% Max Freezing Point (oC) -15 Max Viscosity (25o C)mPa.s 30-50 Package: MTHPA is packed in 240KG or 220kg galvanized iron drums.It should be stored in cool, dry places and keep away from moisture.

Minimum Order: 1 bags

Introduction: Hydrocarbon DCPD Resins with the grades of HCR-D100T and HCR-D238C are also known as DCPD Petroleum Resins.They are pale yellow thermoplastic resins obtained from mainly polymerizing dicyclopentadiene,unsaturated aliphatic 1,3- pentadiene (1,3-piperlene) and some monomers derived from the process of thermal cracking of naphtha. Characters: Light color Low viscosity Good bond strength Low volatility Low molecular weight High transparency Distinguished initial adhesion Excellent compatibility with polymers Good price advantage Specification: Items HCR-D100T HCR-D238C Appearance (eyeballing) yellowish granule yellowish granule Softening Point (R&B)℃ 100-105 108-118 Color No. (50% Toluene)Ga. 3.0-5.0 5.0-8.0 Acid Value(mgKOH/g) 0.50 max 0.50 max Ash Content(wt%) 0.10 max 0.10 max Melt Viscosity(200℃)mPa.s 250 max 300 max Bromine Value (gBR/100g) 100 max 185 max Applications: The major usages of the DCPD Hydrocarbon Resins are the binder for rubber and tire compounding, strap, shoes and Concrete Cure Compounding,etc. Package: Net 25kgs paper Kraft bag or PP woven-plastic bag. Storage: DCPD Hydrocarbon resin is non-hazardous product, stored in dry and cool place with fire fighting facilities, far away from fire, sunshine, moisture and pollution. C5 Petroleum Resin for Rubber and Tyre Compounding

Minimum Order: 1 bags

Product introduction: C5/C9 Copolymerized Petroleum resins is a series of C5 Hydrocarbon Resin modified C9 Hydrocarbon resin obtained from copolymerizing of C5 fraction and C9 fraction that derived from the by-product of thermal cracking of naphtha. It is a granular solid resin with the color range from light yellow to yellow. It is not a high polymer, but a low polymer with the molecular weight range of 300-3000. C5/C9 petroleum resin has the advantages both of C5 Hydrocarbon resin and C9 hydrocarbon resin. It has the characteristics of low acid value, good miscibility, water, ethanol and chemical resistance, the chemical stability against acid, the good adjustment of viscosity and thermal stability, weather resistance and light aging resistance because of non-polar groups in its structure. C5/C9 hydrocarbon resin has good solubility in organic solvents especially in oil solvent, as well as good compatibility with other resins. It also has brittle, increasing viscosity, cohesiveness and plasticity. Generally, it is not used alone, but used as accelerant, regulator and modifier together with other resins in Adhesive, Rubber, Tire and Coating, etc. Chemical properties of the C5/C9 Copolymerized Petroleum Hydrocarbon Resins : Items C5/C9 Copolymerized Petroleum Hydrocarbon Resins Softening Point(R&B)℃ 85-95 95-105 100-110 Color No.(50% Toluene)Ga. 4# 4#-11# 4#-11# Acid Value (mgKOH/g) ≤0.50 ≤0.50 ≤0.50 Ash Content(%) ≤0.10 ≤0.10 ≤0.10 Recommended Applications: C5/C9 Copolymerized Petroleum Resins can be used in hot melt adhesives, adhesives, rubber and tire fields especially in radial tire with the effects of not only increasing adhesion between particles but also improving adhesion between particles and cord; in hot melt adhesives, adhesives fields, C5/C9 can not only provide better initial cohesiveness, but can also be used like rosin resins to adjust and improve viscosity durability and strength of mixture of glue and resins. Pacakge: Net 25 KG Paper kraft bags or Plastic woven bags.

Minimum Order: 1 bags