Mining, Metal, Plastic & Glass Machinery

A rockbreaker is a machine designed to manipulate large rocks, including reducing large rocks into smaller rocks. They are typically used in the mining industry to remove oversize rocks that are too large or too hard to be reduced in size by a crusher. Rockbreakers consist of two major components, a hydraulic hammer (used to break rocks) and a boom (the arm). There are two major types of rock breakers, mobile and stationary - typically placed on a pedestal or slew frame.

Minimum Order: 1 bags

A rockbreaker is a machine designed to manipulate large rocks, including reducing large rocks into smaller rocks. They are typically used in the mining industry to remove oversize rocks that are too large or too hard to be reduced in size by a crusher. Rockbreakers consist of two major components, a hydraulic hammer (used to break rocks) and a boom (the arm). There are two major types of rock breakers, mobile and stationary - typically placed on a pedestal or slew frame.

Jaw rock crusher are mainly used as primary crushers and secondary crushers in mining, building materials, infrastructure and other departments. According to the width of the feed port, it is divided into three types: large, medium and small. The machine with a feed port width greater than 600MM is a large machine, the one with a feed port width of 300-600MM is a medium-sized machine, and the one with a feed port width less than 300MM is a small machine. machine. The jaw crusher is simple in structure, easy to manufacture and reliable in operation. Model:PE-200*350 Inlet Size:200*350mm Max.Feed Size:180mm Discharge Mouth Controllable Range:18-70mm Capacity: 3-10t/h Eccentric Shaft Speed:260r/min Motor:11kw Weight:1.5t Ove , rall Size:1000*870*990mm

Minimum Order: 1 bags

small rock crusher are mainly used as primary crushers and secondary crushers in mining, building materials, infrastructure and other departments. According to the width of the feed port, it is divided into three types: large, medium and small. The machine with a feed port width greater than 600MM is a large machine, the one with a feed port width of 300-600MM is a medium-sized machine, and the one with a feed port width less than 300MM is a small machine. machine. The jaw crusher is simple in structure, easy to manufacture and reliable in operation. Model:PE-200*300 Inlet Size:200*300mm Max.Feed Size:180mm Discharge Mouth Controllable Range:15-50mm Capacity:2-6t/h Eccentric Shaft Speed:260r/min Motor:7.5kw Weight:1.2t Ov , erall Size:910*750*990mm

Minimum Order: 1 bags

3 Ton Mining Trolley Locomotive for Copper Mine Trolley electric locomotive is a kind of rail transportation traction equipment, powered by transformers and overhead lines. Mainly used in mines where there is no risk of explosion. Because of its special power supply mode, the trolley electric locomotive has no limit on the cruising range. Therefore, it is suitable for long-term and long-distance use. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive / total weight (t) : 3 ton Track gauge (mm) : 600.762.900 Traction (KN) : 6.1 5.74 Max. Traction (KN) : 7.36 Speed(km/h) : 10.6 7.5 Power (KW) : 12KWx1 6.5KWX2 Dimensions Length(mm) : 2700 2750 Width(mm) : 940,1102 or 1240 Height(mm) : 1550 1500 Wheelbase (mm) : 816 850 Wheel diameter (mm) : 650 850 Min Curve radius (m) : 5.7 6 Controller : Resistencia or IGBT Braking method : Mechanical Detailed Photos Advantages of our product 1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment. 2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment. 3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard. 4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails. 5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive. 6. 40 years richful experience with the ability to design and make customized product according to your requirements. 7. Proving factory online-visiting Factory Test Mining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%. 3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions. Motor test The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments. Explosion-proof motors are carried out with water pressure test. All the test of motor is to ensure that can adapt to harsh working conditions. Cases 1. A good feedback of our lithium battery locomotive from a client of Latin America 2. In order to solve the exist problems of lead-acid batteries. More than 30 lead-acid battery electric locomotives in this large mining were changed into lithium battery electric locomotives, which improved the work enthusiasm and production efficiency of employees, reduced costs,and more environment- friendly. 3. The mining rock drill car designed by Sunward Co., has a small size and simple structure, so the space for placing the lithium battery on the body is very limited. According to the limitation size, our company design a lithium power supply power plan, which perfectly solves the problem of lithium power supply space. In order to adapt to the special industrial and mining environment and improve transportation efficiency, a batch of 2.5-ton lithium battery electric locomotives are designed to Myanmar Clients. FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarantee the power of the locomotive. 1.Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. 2.After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. 3.Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock 4.Shipping method: Sample order: we suggest Courier express like DHL/UPS/FEDEX or by air Bulk order: we suggest by air or by sea. 5.Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 6.After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality

Minimum Order: 1 bags

Vertical Machining Center (VMC) – HG1275V is utilized primarily as a metal cutting machine that is useful in cutting or shaping steel, aluminum, and other hard materials in a precision formed or machined surface. Aside from these, it can be also be used for milling, boring, drilling, carving, engraving, tapping, thread cutting, and more operations. It is used in various machinery manufacturing industries with high precision and mass production requirements such as aerospace, automobile, handicrafts, mold making, military products, electronic and electrical, light and textile, etc. ITEM UNIT HG-1275V Travel of X Axis (Left-Right) mm 1200 Travel of Y Axis(Front-Back) mm 750 Travelof Z Axis(Up-Down) mm 600 Working Table Size(L*W) mm 1300×700 Max. Loading Weight kg 1000 Machine Floor Space (LxWxH) mm 3300×2500×2800 Machine Weight kg 8500 Vertical Machining Center (VMC) – HG1275V is a vertical milling machine with Tool Magazine and Fanuc / Mitsubishi CNC control system. It is used to mill 2D/3D shapes or patterns on various materials. It uses a rotating cylindrical tool, which is able to move along multiple axis, and can create a variety of shapes, slots and holes. In addition, the workpiece is often moved across the milling tool in different directions. HG Machinetools CNC Vertical Machining Center (VMC) is suitable for engraving, carving, milling, cutting and drilling most materials. So it is widely used in injection mould, ironware mould, metal molds and other molding industries. It is especially designed for batch milling molds, watch, eyeglasses, panel, brand, badge, outside surface’s sleeking, three-dimensional graphics and words. Besides that, it’s easy for this mill to form 2D or 3D relieves on a wide range of materials. HG Machinetools Vertical Machining Center machine body, worktable, column, milling head, etc. are all cast from high-strength cast iron, and undergo secondary tempering and aging treatment to optimize the reinforcement structure, making the overall performance more in line with the requirements of processing characteristics and stability. Vertical Machining Center HG1275V Hgmachinetoolscom HG Machinetools A. Advantages of HG Machinetools’ Vertical Machining Center (VMC) – HG1275V 1. Machine body’s guide rail adopts a large span size design, and the column adopts an A-shaped structure design, which makes the machine tool rigid and thermally stable. 2. Taiwan imported high-performance spindle, optionally equipped with spindle oil cooling device to control spindle temperature rise and improve cutting accuracy. 3. All three feed axes are supported by Taiwan imported linear roller guides, ensuring the accuracy of three-axis positioning. 4. Both ends of the ball screw are pre stretched, increasing the transmission stiffness and eliminating the thermal deformation generated during rapid movement in advance. 5. Our Vertical Machining Center adopts a splash proof sheet metal fully protective design, which is beautiful and elegant, ensuring the personal safety of operators. B. Key Features of HG Machinetools’ Vertical Machining Center (VMC) – HG1275V a. Fully Enclosed Cover b. Controller Integrated c. Servo Motors d. Tool Magazine e. With FANUC control system f. Automatic Lubrication System g. HIWIN/PMI Roller Type Linear Guideway h. HIWIN/PMI Ball Screw i. FAG Bears j. Tool Magazine OKADA/Aimach C. Optional 1. Different Control System Optional 2. 4th-Axis / 5th-Axis Optional 3. Different Speed of Spindle Optional 4. Different Type of Tool Magazine Optional 5. Tools Capacity of Tool Magazine Optional D. Some Specific Configurations High Strength Castings The machine body, work table, column, milling head, etc. of HG Machinetools Vertical Machining Centers are all made of high-strength cast iron, and are subjected to secondary tempering and aging treatment to optimize the reinforcement structure, making the overall performance more in line with the requirements of machining characteristics and stability. High Strength Castings HG Machinetools CNC Controller HG Machinetools CNC Control System Fanuc(Japan), Mitsubishi (Japan), Syntec (Taiwan,China) Optional Adoption of powerful and highly reliable high-speed microprocessor systems; Dynamic toolpath simulation, intelligent warning display, self-diagnostics and more; Multi-segment pre-reading control is particularly suitable for high-speed and large program processing; RS-232 serial transmission, memory card transmission, USB transmission, combined with DNC standard processing configuration, facilitates the transmission of large- capacity programs and online processing, with better processing efficiency and effectiveness. Spindle From Taiwan, China Speed 6000/8000/10000/12000 RPM Optional The spindle and motor belt are designed with a 1:1 connection, and the main motor is a low inertia motor with a speed of 10000 rpm. It is a wise choice for high precision, high rigidity and heavy cutting situations; if there is a higher requirement for surface smoothness, a 12000 rpm direct spindle can also be selected. Spindle HG Machinetools Cooling system HG Machinetools Cooling System HG Machine is equipped with a cooling system, and the combination of a large flow pump and many nozzles can solve the machining problems of tool overheating and workpiece deformation due to machining heat. E. Some Components of Our CNC Machining Centers CNC Control System Fanuc Tool Magazine Linear Guideway HIWIN Lubricating oil system Manual Pulse Generator Heat Exchanger

Minimum Order: 1 bags

Vertical Machining Center – HG1160V can manufacture the high quality parts to a higher level of detail and better surface finish. The core function of CNC Milling machine involves mechanically cutting away at a workpiece into the desired shape. It is engineered to mass-produce many components from various materials, but with minimum human input needed to complete the manufacturing or production. ITEM UNIT HG-1160V Travel of X Axis (Left-Right) mm 1100 Travel of Y Axis(Front-Back) mm 600 Travelof Z Axis(Up-Down) mm 600 Working Table Size(L*W) mm 1200×600 Max. Loading Weight kg 800 Machine Floor Space (LxWxH) mm 3100×2450×2800 Machine Weight kg 7000 Vertical Machining Center – HG1160V is an automatic power mill with CNC (Computer Numerical Controlled) controller. It is used to mill 2D/3D shapes or patterns on various materials. It uses a rotating cylindrical tool, which is able to move along multiple axis, and can create a variety of shapes, slots and holes. In addition, the workpiece is often moved across the milling tool in different directions. HG Machinetools CNC Vertical Machining Center (VMC) is suitable for engraving, carving, milling, cutting and drilling most materials. So it is widely used in injection mould, ironware mould, metal molds and other molding industries. It is especially designed for batch milling molds, watch, eyeglasses, panel, brand, badge, outside surface’s sleeking, three-dimensional graphics and words. Besides that, it’s easy for this mill to form 2D or 3D relieves on a wide range of materials. HG Machinetools Vertical Machining Center machine body, worktable, column, milling head, etc. are all cast from high-strength cast iron, and undergo secondary tempering and aging treatment to optimize the reinforcement structure, making the overall performance more in line with the requirements of processing characteristics and stability. Vertical Machining Center HG1160V HG MachinetoolsA. Advantages of HG Machinetools’ Vertical Machining Center – HG1160V 1. Machine body’s guide rail adopts a large span size design, and the column adopts an A-shaped structure design, which makes the machine tool rigid and thermally stable. 2. Taiwan imported high-performance spindle, optionally equipped with spindle oil cooling device to control spindle temperature rise and improve cutting accuracy. 3. All three feed axes are supported by Taiwan imported linear roller guides, ensuring the accuracy of three-axis positioning. 4. Both ends of the ball screw are pre stretched, increasing the transmission stiffness and eliminating the thermal deformation generated during rapid movement in advance. 5. Our Vertical Machining Center adopts a splash proof sheet metal fully protective design, which is beautiful and elegant, ensuring the personal safety of operators. B. Key Features of HG Machinetools’ Vertical Machining Center – HG1160V a. Fully Enclosed Cover b. Controller Integrated c. Servo Motors d. Tool Magazine e. With FANUC control system f. Automatic Lubrication System g. HIWIN/PMI Roller Type Linear Guideway h. HIWIN/PMI Ball Screw i. FAG Bears j. Tool Magazine OKADA/Aimach C. Optional 1. Different Control System Optional 2. 4th-Axis / 5th-Axis Optional 3. Different Speed of Spindle Optional 4. Different Type of Tool Magazine Optional 5. Tools Capacity of Tool Magazine Optional D. Some Specific Configurations High Strength Castings The machine body, work table, column, milling head, etc. of HG Machinetools Vertical Machining Centers are all made of high-strength cast iron, and are subjected to secondary tempering and aging treatment to optimize the reinforcement structure, making the overall performance more in line with the requirements of machining characteristics and stability. High Strength Castings HG Machinetools CNC Controller HG Machinetools CNC Control System Fanuc(Japan), Mitsubishi (Japan), Syntec (Taiwan,China) Optional Adoption of powerful and highly reliable high-speed microprocessor systems; Dynamic toolpath simulation, intelligent warning display, self-diagnostics and more; Multi-segment pre-reading control is particularly suitable for high-speed and large program processing; RS-232 serial transmission, memory card transmission, USB transmission, combined with DNC standard processing configuration, facilitates the transmission of large- capacity programs and online processing, with better processing efficiency and effectiveness. Spindle From Taiwan, China Speed 6000/8000/10000/12000 RPM Optional The spindle and motor belt are designed with a 1:1 connection, and the main motor is a low inertia motor with a speed of 10000 rpm. It is a wise choice for high precision, high rigidity and heavy cutting situations; if there is a higher requirement for surface smoothness, a 12000 rpm direct spindle can also be selected. Spindle HG Machinetools Cooling system HG Machinetools Cooling System HG Machine is equipped with a cooling system, and the combination of a large flow pump and many nozzles can solve the machining problems of tool overheating and workpiece deformation due to machining heat. E. Some Components of Our CNC Machining Centers CNC Control System Fanuc Tool Magazine Linear Guideway HIWIN Lubricating oil system Manual Pulse Generator Heat Exchanger

Minimum Order: 1 bags

Vertical Machining Center (VMC) – HG855V is an automatic power vertical milling machine with CNC (Computer Numerical Controlled) control and tool magazine. It is used to mill 2D/3D shapes or patterns on various materials. It uses a rotating cylindrical tool that can move along multiple axes and create a variety of shapes, slots and holes. In addition, the workpiece is often moved across the milling tool in different directions. HG Machinetools CNC Vertical Machining Center (VMC) is suitable for engraving, carving, milling, cutting and drilling most materials. Therefore, it is widely used in injection mold, hardware mold, metal mold and other molding industries. It is especially designed for batch milling molds, watch, eyeglasses, panel, brand, badge, outer surface’s sleeking, three-dimensional graphics and words. Besides, it’s easy for this mill to form 2D or 3D reliefs on a wide range of materials. HG Machinetools Vertical Machining Center machine body, work table, column, milling head, etc. are all made of high-strength cast iron, and undergo secondary tempering and aging treatment to optimize the reinforcement structure, making the overall performance more in line with the requirements of processing characteristics and stability. 855V HG Machinetools A. Advantages of HG Machinetools’ Vertical Machining Center (VMC)- HG855V 1. The guide rail of the machine body adopts a large span design, and the column adopts an A-shaped structure design, which makes the machine tool rigid and thermally stable. 2. Taiwan imported high performance spindle, optionally equipped with spindle oil cooling device to control spindle temperature rise and improve cutting accuracy. 3. All three feed axes are supported by Taiwan-imported linear roller guides, ensuring the accuracy of three-axis positioning. 4. Both ends of the ball screw are pre-stretched, which increases the rigidity of the transmission and eliminates the thermal deformation caused by rapid motion in advance. 5. Our vertical machining center adopts a splash-proof sheet metal fully protective design, which is beautiful and elegant, ensuring the personal safety of operators. B. Key Features of HG Machinetools’ Vertical Machining Center (VMC) – HG855V a. Fully Enclosed Cover b. Integrated Controller c. Servo Motors d. Tool Magazine e. With FANUC control system f. Automatic Lubrication System g. HIWIN/PMI Roller Type Linear Guide h. HIWIN/PMI Ball Screw i. FAG Bears j. OKADA/Aimach Tool Magazine C. Optional 1. Different Control System Optional 2. 4th-Axis / 5th-Axis Optional 3. Different Speed of Spindle Optional 4. Different Type of Tool Magazine Optional 5. Tools Capacity of Tool Magazine Optional D. Some Specific Configurations High Strength Castings The machine body, work table, column, milling head, etc. of HG Machinetools Vertical Machining Centers are all made of high-strength cast iron, and are subjected to secondary tempering and aging treatment to optimize the reinforcement structure, making the overall performance more in line with the requirements of machining characteristics and stability. High Strength Castings HG Machinetools CNC Controller HG Machinetools CNC Control System Fanuc(Japan), Mitsubishi (Japan), Syntec (Taiwan,China) Optional Adoption of powerful and highly reliable high-speed microprocessor systems; Dynamic toolpath simulation, intelligent warning display, self-diagnostics and more; Multi-segment pre-reading control is particularly suitable for high-speed and large program processing; RS-232 serial transmission, memory card transmission, USB transmission, combined with DNC standard processing configuration, facilitates the transmission of large- capacity programs and online processing, with better processing efficiency and effectiveness. Spindle From Taiwan, China Speed 6000/8000/10000/12000 RPM Optional The spindle and motor belt are designed with a 1:1 connection, and the main motor is a low inertia motor with a speed of 10000 rpm. It is a wise choice for high precision, high rigidity and heavy cutting situations; if there is a higher requirement for surface smoothness, a 12000 rpm direct spindle can also be selected. Spindle HG Machinetools Cooling system HG Machinetools Cooling System HG Machine is equipped with a cooling system, and the combination of a large flow pump and many nozzles can solve the machining problems of tool overheating and workpiece deformation due to machining heat. E. Some Components of Our CNC Machining Centers CNC Control System Fanuc Tool Magazine Linear Guideway HIWIN Lubricating oil system Manual Pulse Generator Heat Exchanger ITEM UNIT HG-850V HG-855V HG-1160V HG-1275V HG-1370V HG-1580V Travel of X Axis (Left-Right) mm 800 800 1100 1200 1300 1500 Travel of Y Axis(Front-Back) mm 500 550 600 750 700 800 Travelof Z Axis(Up-Down) mm 500 550 600 600 700 700 Distance from workbench to spindle end face mm 150-650 150-700 120-720 120-720 80-780 150-850 Distance from the front end of column to the center of Spindle mm 600 643 650 775 810 925 Working Table Size(L*W) mm 1000×500 1000×550 1200×600 1300×700 1400×700 1600×800 Max. Loading Weight kg 400 500 800 1000 1600 1600 Working Table T-Slot mm 18T×90×5 18T×90×5 18T×100×5 18T×100×6 18T×110×5 18T×110×7 X/Y/Z Axis Rapid Feeding Speed m/min 48×48×48 48×48×48 36×36×36 36×36×36 30×30×30 30×30×30 Power of X/Y/Z Axis According to the Control System According to the Control System According to the Control System According to the Control System According to the Control System According to the Control System Roller Guideway of X/Y/Z X:35(4Rollers) Y:35(4Rollers) Z:35(4Rollers) X:35(4Rollers) Y:45(4Rollers) Z:45(6Rollers) X:45(6Rollers) Y:45(4Rollers) Z:45(6Rollers) X:45(6Rollers) Y:55(4Rollers) Z:45(6Rollers) X:45(6Rollers) Y:45(8Rollers) Z:45(6Rollers) X:55(6Rollers) Y:45(4Rollers) Z:55(6Rollers) , Ball Screw of X/Y/Z 4016 4016 4012 4012 4512 5010 Speed of Spindle rpm 8000/10000/12000 8000/10000/12000 8000/10000/12000 6000/8000/10000/12000 6000/8000/10000/12000 6000/8000/10000/12000 Spindle Taper BT40 BT40 BT40 BT40/BT50 BT40/BT50 BT40/BT50 Transmission Type mm Belt／Direct Connect Belt／Direct Connect Belt／Direct Connect Belt／Direct Connect Belt／Direct Connect Belt／ Direct Connect Spindle Motor kW According to the Control System According to the Control System According to the Control System According to the Control System According to the Control System According to the Control System Position accuracy mm ±0.003/300 ±0.003/300 ±0.003/300 ±0.005/300 ±0.005/300 ±0.005/300 Repeatability position accuracy mm ±0.003/300 ±0.003/300 ±0.003/300 ±0.003/300 ±0.003/300 ±0.003/300 Tool Magazine (Tools Qty) T BT40-24 BT40-24 BT40-24 BT40-24T/BT50-24T BT40-24T/BT50-24T BT40-24T/BT50-24T Control System Syntec/Mitsubish/Fanuc Syntec/Mitsubish/Fanuc Syntec/Mitsubish/Fanuc Syntec/Mitsubish/Fanuc Syntec/Mitsubish/Fanuc Syntec/Mitsubish/Fanuc Machine Floor Space (LxWxH) mm 2700×2400×2500 2700×2400×2600 3100×2450×2800 3300×2500×2800 3600×2800×2800 4400×3200×3000 Pressure Requirement kg/cm² 6-7 6-7 6-7 6-7 6-7 6-7 Power Supply Kva 20 20 20 25 30 35 Edit Machine Weight kg 5200 5500 7000 8500 10000 13000

Minimum Order: 1 bags

Our this machine is used to produce the Spring,the capacity can reach 70-90pcs/min.

Minimum Order: 1 bags

Steel shots in the lower part of the separation box goes into the blasting components through feeding tube and driven by the motor. The high-speed rotating shot will be thrown and stroke against the surface of workpieces at the speed of 80m/s. And thus carry out clean-up operation. Under the effect of negative pressure, the shot abrasive and dust will be back into sand separation box where the shot, dust and impurities will be separated completely. Good shot materia into the blast is expected to continue to use. Dust and impurities wating to be processed have been filtered to the airtight dust box.

Minimum Order: 1 bags

The handheld automatic nailing machine is composed of the host (automatic arranging feeding device) and the nailing gun assembly. The working principle is to automatically arrange and separate the pull rivet by the vibration device, and use the compressed air as the power to automatically transport the pull rivet to the lunch gun's mouth through the pipeline. Flying effects automatic nailing machine can upgrade the traditional handmade nailing operation to automation operations. The combined robotic arm use can achieve unmanned operations, which improves work efficiency.

Minimum Order: 1 bags

The steel tube straightening machine is used for restoring the bending and distorted tubes, after restoring, the tube will be no indentation and diameter reducing. The machien is the ideal equipment for building construction companies and steel tube rental enterprise , scafflod construction unit.     The steel pipe straghtening machine is consist of straightening system , removing rust machine, and painting box. It can be used for only straightening, also for straightening and rust removing and painting at the same time. Mechnical rollers straightening , stable and durable .

Minimum Order: 1 bags

ZTS-40C Rebar Taper Thread Cutting Machine is designed and manufactured by Hebei Yida Reinforcing Bar Connecting Technology Co., Ltd. It is mainly used as a special equipment to make taper thread on the end of the rebar in the processing of rebar connection. Its applicable diameter is from ￠16 to ￠40. It applies to Grade Ⅱ and Ⅲ level rebar. It has reasonable structure, light and flexible, simple operation, high production efficiency. It is widely used in steel bar end processing of taper thread joints in concrete works. It adapts to a variety of complex construction site environment. 1.The taper rebar couplers are usually longer than others, so the strength of the rebar won’t be influenced. 2.The advantage of the taper thread cutting is easy operation and can reduce the operation time for each joints. 3.The tapered thread helps prevent cross-threading and provides a positive locking, no-slip connection. 4.It can be used on most international grades and types of reinforcing steel bar (rebar) and installs quickly, taking approximately four and one-half turns to engage. 5.No special tools or skills are required. The main performance parameters: Processing of Bar Diameter Range: ￠16mm-￠40mm Processing Thread Length: less than or equal to 90mm Processing Steel Length: greater than or equal to 300mm Power: 380V 50Hz Main Motor Power: 5.5KW Reduction Ratio Reducer: 1:35 Rolling Head Speed: 41r/min Overall Dimensions: 1000 × 480 × 1000 (mm) Total Weight: 510kg

1).BGZL-40B3 Rebar Rib Peeling Thread Rolling Machine is used for rebar mechanical splicing in construction work. When the machine is running, the rebar ribs are peeled first, and then parallel threads are rolled on rebar end. The two processes are completed only once, making the processing speed fast, the thread quality high and the operation stable. Machinable rebar with diameters from 16mm to 40mm. 2).The Capacity and Usage BGZL-40B3 Rebar Rib Peeling Thread Rolling Machine is a exclusive use rib peeling and knurling machine for straight screw thread connection. It is mainly used for processing of the ends of structural steel bars. 3).Fundamental Principle First, It can peel the across and vertical rib by the rib peeling mechanism and then use the roll extrusion part to roll and press the screw thread. This machine combines the rib peeling, rolling and pressing together. It can complete the screw thread processing with only once of the loading. 4).The Features of The Machine 1. It can complete the rib peeling, and then roll and press the thread processing in one loading and the speeding of the processing was very quickly. 2. High automation with easy operation. 3. The steel bar was rolled and pressed after the rib peeling and it makes the screw thread with better decorative design, high precision and good diameter consistency. 4. The range of the steel bar processing is very large; this machine can complete the processing of the screw thread for the steel bar in the diameter range of 16----40mm. 5. The rolling head structure was scientific, one machine only equipped with one rolling head. It can complete the positive and negative roll extrusion together when changing the position of the equipment installation. 6. It is very easy to roll and press the different standard steel bar with the same thread pitch, it can be adjusted without disconnect the rolling head. 7. The pressure dimension was stable and the rolling head can be adjusted and it also has the orientation system.

Minimum Order: 1 bags